Rejuvenation of pond near mandir in village nathupur ward no.35 Gurugram

Amount

NS Item

-Bridge Ladder: 10’L x 2’W x 6’H. Horizontal ladder is of G.I pipe jindal make 2”, ¾” & vertical ladder is of same material of 12 gauge ISI mark with suitable PU Primer & PU Paints. Complete item with GST, Transportation, Installation with C.C & labor at site with 2 years defect liability period free of cost to full satisfaction of engineer in charge.

-chain link fencing (5' ht.) with 50x50x2.6mm wire

-Elliptica exerciser: Providing designing and fixing elliptical exercise of size 1200 x 540 x 1600 mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipes 40mm dia and 2.5 mm thick. All pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior

-Providing and fixing 3/4"dia Hydrant connection

-Supply and Planting of Ficus Black plant including digging of holes,cost of loading,unloading and planting in position including watering and labour cost with three months maintenance period complete in all respect.

-Supply and satcking of Bougainvilea (variety Butiana, Lady Mary Baring, Mahara, Mohan, Scrarlet Queen, Varigata, etc. 60-75 cm

(i) 6 No. Ornamental Canopy Design FRP pillar FRP base pedestal with vertical fitted design having base width of size 260mm x 260mm and height 900mm having 4 no. of size 15mm drilled in the base with hold fasts and having B class vertical m.s pipe of size 89 mm and height 2890mm, the central m.s pipe having FRP capital sign enclosed. Complete pillar suitably grinded spray primered and subsequently

-Chain Swing (2 seater): 10’L x 5’.5W x 8’.5 H. Horizontal frame & vertical legs is of m.s pipe 2” x 12 gauge. It stays with m.s pipe 1” x 12 gauge. Swinging seats-2 nos is of FRP molded Seat of 2mm thick fitted with m.s pipe ½” frame x 12 gauge which hang with m.s chain 6mm thick duly plated with ball bearing & m.s flat 6mm thick housing with suitable PU Primer & PU Paints.

Hiring of labour as per DC rates for maintenance of Horticulture works for one year

-Merry-Go-Round (4 seater): 5' Dia. Main frame is of m.s sq. pipe 2" x 2" x 14 G and having suitable handle & foot-rest is of m.s round pipe 3/4" x 12 Gauge. Central pipe is of m.s pipe 3" x 12 G which further supports with m.s pipe 1” x 12Gauge with heavy duty shaft 50 mm thick & ball bearing assembly. It consists of 4 no Chair made of Molded FRP Plastic in 3mm thick with suitable PU Primer & PU Paints. Complete item with GST, Transportation, Installation with C.C & labor at site.

-Plumeria Alba 5'-6' ht well grown

-Providing an fixing of Gate valve for Hydrant connection.

-Providing and fixing of SS gate 304 Grade

Pull Chair:- Providing, and fixing of Pull pair of size 2500 X 800 X 2000 mm make of Green Gym or Equivalent fabricated with main post of 140 mm dia and 3.0 mm thick rest of the pipes are 40mm dia and 3.0 mm thick all pipes made up of hot roiled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and bu rrs. Zinc .primer paint to be applied at all welding points prior to finishing. Pedals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be' made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Officer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GULLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of

-Supply of RH Pipe 1" dia.

-(10287) Providing Ficus infectoria (Pilkhan) tree of plants height 150-165 cm in big polybag of plants size 25 cm.

Double Cross Walker/ Cross trainer double:- Providing, and fixing Double Cross Walker of size 1600 X 600 X 1600 mm make of Green Gym or Equivalent fabricated with main post of 140 mm dia and 3.0 mm thick rest of the pipes are 40 mm dia and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Officer -in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength N425 and J shaped welded bolts and once the concrete is set, fix

Horse Rider Station:- Providing, and fixing of horse rider station of size 1000 x 600 x 1100 mm make of Green Gym or Equivalent fabricated with main post of 140 mm dia and 3.0 mm thick rest of the pipes are 40mm dia and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Alczo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Padals shall be made up Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and a. .royal of arge regari ing materia , s ape of equipment, colour on metal, seat and base cover plate and fixing ofequipment etc.

-Providing and fixing precast concrete benches L shape base support in grey cement thickness 100mm back height 1000mm front 450mm . Size 1500x100x50mm

-Providing and laying 3/4"dia G.I pipe line.

-Providing Cassia fistula (Amaltash) of plants height 120-135 in big poly bags of plants size 25 cm girth 2"-3"

-Supply and stacking of plant Ficus panda of height 45-60 cm with 6-7 branches and healthy foliage in p. bag of size 25 cm.

-Supply and stacking of plants Kaner dwarf Red 1'½'' ht, 8''polybag, spread1' well grown

-Supply and stacking of plants Tecomagaudichaudi 2'ht, 8''polybag, spread1' well grown

-Wave Slide: 9’.5 L x 5’H. Wave slide is of molded Fiberglass Reinforced Plastic (FRP) of 6mm thick and climbing ladder is of m.s pipe 1” x 12 gauge & m.s rectangular pipe

Bidder Name

Amount

Shanti Electrical Co.(GSTN-06AOFPK1698P1ZA)

Surender Kumar Contractor(GSTN-NA)

Shanti Electrical Co.

Shanti Electrical Co.