Construction of Anganwadi Building at Sithathikkadu Habitation in Pinnavasal Panchayat

Amount

Construction of Anganwadi Building at Sithathikkadu Habitation in Pinnavasal Panchayat.

Earthwork excavation for foundation in all soils and sub soil to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring strutting and requiring the sides of foundation

Collection and supply of gritty gravel from approved quarry including cost and conveyance of all materials to site including all labour charges for filling etc.complete,

Supplying and filling in foundations and basement with filling sand in layers not more than 15cm. Thick well ramed, watered and compacted complete

Plain Cement Concrete 1 : 4 :8 ( one part of cement, four parts of sand and eight parts of hard broken stone ) using 40 mm gauge hand broken hard broken granite stone jelly complying with standard specifications in foundations and basement.

Brick work in cement mortar 1:5 mix using country bricks 83/4"41/4"x21/4" including cost and conveyance of all materials to site and all labour charges etc complete

Below basement

Above basement

Supplying & Erecting centering for sides & soffits including necessary supports & strutting upto 3.29m height for plane surfaces in all floors with all cross bracings using mild steel sheets of size 90x60cm&10gauge stiffened, welded with steel angle of size 25x25x3 mm for boarding laid over silver oak joists of size 10x6.5cm spaced @ about 90cm and supported by casurina props of 10-13cm dia sapced @75cm etc., complete complying with standard specifications and as directed by the departmental officers. Rate for 10m2 for the following items.

Centering below GL

Column, Roof Slab

sunshade

Supplying and Fabricating and placing in position MS steel or ribbed for steel for all reinforced cement concrete works as per the design given including cost of steel and binding wire in all floors etc, Complete complying with stanard specification.

Cement concrete 1:1.5:3 using 20mm ISS HBG metal for all RCC item of works excluding cost of Rein forcement and fabricating charges, centering and shuttering but including curing and providing fixtures like fan clamps in the RCC floor or roof slabs wherever necessary and bearing surfaces of walls , sides and bottom of the slabs, beams etc., shall be finished smooth with cement mortar 1:3, 12mm thick. and with kraft paper without claiming extra as directed by the departmental officers complete complying with standard specifications.

Providing granolithic floor with CC 1:2:4 mix using 25mm ISS HBG size metal including cost and conveyance of all materials to site and all labour charges etc complete

Paving the floor with best approved quality fine polished Kotta stone slabs of size 600 x 600 of 18 / 20mm with machine cut edges and matching marble slab not less than 100mm width other than Adanga Marbles as border laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three sand) fixing the slabs in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments and polishing with floor polisher to a high degree of finish etc.,

Paving the flooring with special type of flooring tiles (Cement based Hydraulically pressed Anti skid tiles (20mm thick) in CM 1:3, 20mm thick

Dadooing with glazed tiles of size 300x200x6mm including cost and conveyance of all materials to site and all labour charges etc complete

Providing granolithic floor with CC 1:2:4 mix using 25mm ISS HBG size metal including cost and conveyance of all materials to site and all labour charges etc complete

Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [ The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete]. The Putty shoule be got approved by the Executive Engineer before use on work.

Plastering in CM 1:5, 12 mm tk, including cost and conveyance of all materials to site and all labour charges for mixing, laying and curing etc compete.

Supplying and painting the walls with two coats of oil bound distemper over one coat of water based cement primer including cost for distemper, primer, cleaning and scrapping the walls, rendering the walls smooth with necessary putty, brushes, scaffolding arrangements, labour charges, etc., as per standard specification. (The colour and shade of the distemper shall be got approved by the Executive Engineer before use of work).

Exterior Emulsion paint two coats with approved Emulsion paint over one coat of primaring coat of cement plastered wall surface, ceiling and other new surface including cleaning, preparing the surface, curing, scaffolding charges etc., complete

Supply and fixing of mild steel Doors of any size with standard specification including cost and conveyance of all materials and all labour charges etc complete

Painting two coats over new iron works using ready mixed enamel paint inculding cost and conveyance of materials and all labour charges etc.,complete

Supply and fixing fine Polished Cuddapah Slab of Cost of 38/40 mm thick laying to correct alignment with necessarycement motors and black power etc., specification and as direct

Providing and fixing of PVC rain water down fall pipe 110mm dia with necessary T W Clamps, Plug, Shoes, bend, Screws, nails etc., complete

Provision for Electrification

Light Point and Fan Point SD18

Ceiling Fan SD 110

Supply and fixing of 4'18 W LED Tube light

Exhaust fan PWD 116

Plug Point SD38

service wire ( SD 62 )

EB Metre board SD 125

EB Main board SD 145

Provision for Water supply Arrangements

Supplying and fixing in position of baby friendly water closet of approved quality including cost and conveyance of all etc complete

Supplying and fixing in position of European water closet of approved quality including cost and conveyance of all etc complete

Supplying and fixing in position of White hand wash basin of good quality including cost and conveyance of all etc complete

Provision for Name board

GST Amount for providing Service to Government Contract Works for the above Construction Works. {GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

V.Balasubramaniyan (BID ID -1524374)