Civil and Partition works at CISF barrack at Ground floor of CBI HQ Building, New Delhi

BOQ for Partition work of CISF Barrack at CBI HQ New Delhi

LAMINATE: Providing & Fixing decorative high pressure laminated sheet of plain / wood grain

in gloss / matt/ suede finish with high density protective surface layer and reverse side of

1 9.127 adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of

approved quality.

Providing and fixing partition upto ceiling height consisting of G.I. frame and required board,

including providing and fixing of frame work made of special section power pressed/ roll form

G.I. sheet with zinc coating of 120 gms/sqm(both side inclusive), consisting of floor and ceiling

channel 50 mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and

ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50

mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm

wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically

within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to

centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed

flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450

mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall

screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. The

boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S.

fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be

provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head

screws, including jointing and finishing to a flush finish with recommended jointing compound,

jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of

primer suitable for board as per manufacture’s specification and direction of engineer in

charge all complete.

66 mm overall thickness partition using 8 mm thick, double skin multipurpose cement board

Type-B, Category-III as per IS: 14862 : 2000 reinforced with cellulose fibre manufactured

9.105.4 through autoclaving process (High pressure steam cured) with suitable fibre cement screws SQM 90 2062.85 1,85,656.50

Providing and fixing plain lining with necessary screws/nuts & bolts/nails, including a coat of

approved primer on one face, and fixed onwooden /steel frame work, complete as per

3 9.140 direction of Engineer-incharge(Frame work shall be paid for separately).

supply & fixing Self Adhesive Charcoal Tape of 6mm Thickness for waterproofing jointing

memberanes. ( 5 Mtr. Roll )