Construction of office of Himachal Pradesh Legal Services authority at Mauja Sankat Mochan Chakkar District Shimla

Amount

Cutting in earth work in all heights and depths in all kinds of soil, including saturated soils comprising of pick work, jumper work and blasting work both in soft and hard rock with chiseling and wedging out of rock (where blasting is prohibited) and their intermediate classification of soils including, dewatering wherever required, setting out to required lines, levels as shown on the drawing and directed by the Engineer-in-Charge at site according to the HPPWD specification of 1990 (one thousand nine hundred ninety) volume-I (one) and sorting out useful and un-useful material and transportation of the un-useful material for disposing at approved dumping site or otherwise and including payment of prescribed charges of dumping to the owner of dumping site (to be arranged by the contractor) as per satisfaction of Engineer-in-Charge through all modes including payment of prescribed dumping charges of M.C.if levied through all mode of transportation including head load, animal load or mechanical means along with its levelling, fine dressing and with all kind of labour, machineries, tools, equipments and safety measures and incidentals necessary to complete the work by mechanical means and labour (if required). All useful materials such as stones shingles aggregate and slates shall be properly stacked at site to the maximum possible extent in all lead lift and through all mode of transporttation as per direction of Engineer-in-Charge. The recovery for stones, whether useful or not for 69.982 cum @ Rs 300.00 only (Rupees three hundred only) shall be effected on pro-rata basis in all circumstances. Any loss to the public and private property during the course of execution and disposal of serviceable and un-serviceable material shall be the absolute resposibility of the contractor and shall have to be duly compensated by him in all respect including all incidental charges and as directed by the Engineer-in-Charge.

Excavatuin in earth work by mechanical means (Hydraulic excavator) / manual means in all heights and depths in all kinds of soils including saturated soil comprising of pick work, jumper work and blasting work both in soft and hard rock with chiseling and wedging out of rock (where blasting is prohibited) and their intermediate classification of soils including, dewatering wherever required, setting out to required lines, levels as shown on the drawing and directed by the Engineer-in-Charge at site according to the HPPWD specification of 1990 (one thousand nine hundred ninety) volume-I (one) and sorting out useful and un-useful material and transportation of the un-useful material for disposing at approved dumping site or otherwise and including payment of prescribed charges of dumping to the owner of dumping site (to be arranged by the contractor) as per satisfaction of Engineer-in-Charge through all modes including payment of prescribed dumping charges of M.C.if levied through all mode of transportation including head load, animal load or mechanical means along with its levelling, fine dressing and with all kind of labour, machineries, tools, equipments and safety measures and incidentals necessary to complete the work by mechanical means and labour (if required). All useful materials such as stones shingles aggregate and slates shall be properly stacked at site to the maximum possible extent in all lead lift and through all mode of transporttation as per direction of Engineer-in-Charge. Any loss to the public and private property during the course of execution and disposal of serviceable and un-serviceable material shall be the absolute resposibility of the contractor and shall have to be duly compensated by him in all respect including all incidental charges and as directed by the Engineer-in-Charge.

Excavating in foundation and trenches by mechanical means (Hydraulic excavator) / manual means in all heights and depths in all kinds of soils including saturated soil comprising of pick work, jumper work and blasting work both in soft and hard rock with chiseling and wedging out of rock (where blasting is prohibited) and their intermediate classification of soils including, dewatering wherever required, setting out to required lines, levels as shown on the drawing and directed by the Engineer-in-Charge at site according to the HPPWD specification of 1990 (one thousand nine hundred ninety) volume-I (one) and sorting out useful and un-useful material and transportation of the un-useful material for disposing at approved dumping site or otherwise and including payment of prescribed charges of dumping to the owner of dumping site (to be arranged by the contractor) as per satisfaction of Engineer-in-Charge through all modes including payment of prescribed dumping charges of M.C.if levied through all mode of transportation including head load, animal load or mechanical means along with its levelling, fine dressing and with all kind of labour, machineries, tools, equipments and safety measures and incidentals necessary to complete the work by mechanical means and labour (if required). All useful materials such as stones shingles aggregate and slates shall be properly stacked at site to the maximum possible extent in all lead lift and through all mode of transporttation as per direction of Engineer-in-Charge. Any loss to the public and private property during the course of execution and disposal of serviceable and un-serviceable material shall be the absolute resposibility of the contractor and shall have to be duly compensated by him in all respect including all incidental charges and as directed by the Engineer-in-Charge.

Providing form work with steel plates 3.15 (Three point One Five ) millimeters thick welded with angle iron in frame 30*30*5 (Thirty into Thirty into Five ) millimeters, so as to give a fair finish including centering, shuttering, strutting and propping etc. with wooden/steel battens and ballies in all heights of propping and centering below supporting floor to ceiling and removal of the same in-situ-reinforced concrete and plain concrete work including carriage of all labour equipments and materials to various location through all modes of transportation within all leads, lifts and other incidental charges in:

Foundations, footings, bases of columns, etc. for mass concrete

Flat surfaces such as soffits of suspended floors, roofs, landing and the like.

Lintels, beams, plinth beams, girders, bressumers and cantilevers

Column, pillars, posts and struts. (i) Square, rectangular or polygonal in plan.

Stair cases with slopping or stepped soffits excluding landing

Vertical surfaces

Edges of slabs and breaks in floors and wall: under 20 cm (Twenty centimetre) wide.

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) mechnical mixed and curing complete excluding cost of centring and shuttering in Foundation and plinth as required complete including carriage of all labour equipments and materials to various location through all modes of transportation within all leads, lifts and other incidential charges as per the directions of Engineer-in-Charge.

Providing and laying damp- proof course 50mm thick with cement concrete 1:2:4 (i cement :2 sand :4 graded stone aggregate 20mm nominal size) including carriage of materils within all leads and lifts and as per the direction of Engineer-In- Charge.

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including carriage of materils within all leads and lifts and as per the direction of Engineer-In- Charge.

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth including carriage of materials within all leads and lifts as per the directions of Engineer-in-Charge.

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.

60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern.

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement,including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete,improve workability without impairing strength and durability as per direction of Engineer-in-charge.

All works upto plinth level

All works above plinth level

Providing and laying cement concrete work 1:1½.:3 (1 cement : 1½. sand : 3 graded stone aggregate 20 mm nominal size) mechanically mixed and vibrated for compacting concrete and curing complete excluding cost of form work and reinforcement for reinforce cement concrete including carriage of materials in all leads and lifts.

All work upto plinth level

Suspended floors, roofs, landing and shelves and their support, balconies, beams, girders, bressumers and cantilever.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto all levels including carriage of materils within all leads and lifts and as per the direction of Engineer-In- Charge.

Thermo-Mechanically Treated bars of grade Fe-500D or more.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor all levels in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) including carriage of materils within all leads and lifts and as per the direction of Engineer-In- Charge.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor all levels in cement mortar 1:4 (1 cement : 4 coarse sand) including carriage of materils within all leads and lifts and as per the direction of Engineer-In- Charge.

Second class half brick work using common burnt clay building bricks in plinth levels in cement mortar 1:4 (1 cement : 4 sand) including carriage of material in all leads and lifts as per the directions of Engineer-in-Charge.

Providing and laying weepholes in brick masonry /stone masonry /plain reinforced concrete abutment, wing wall return wall with 100mm (one hundred )milimetre dia PVC pipe extending through the full width of the structures with slop of 1(v);20 (H) towards drawing face complete as per drawings and technical specifications MORD clause 614,709,1204.3.7 including carriage of materials within all leads and lifts as per the direction of Engineer-In-Charge.

Boulder filling tightly hand packed under floor including watering , ramming, consolidating etc. Complete including carriage of materials in all leads and lifts.

Stone filling behind retaining wall including carriage of materials within all leads and lifts as per direction of Engineer - in - charge.

Providing and laying Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : in cement mortar 1:6 ( 1 cement : 6 sand) including carriage of material upto all leads and lifts as per the directions of Engineer-in-Charge.

Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) :

for frames of door and window

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing 3mm thick ACP sheet, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer- in-charge.

Providing and fixing glazing in aluminium door, window,ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge .(Cost of aluminium snap beading shall be paid in basicitems including carriage of materils within all leads and lifts and as per the direction of Engineer-In- Charge.

4.0 mm thick glass panes

5.5 mm thick glass panes

Providing & fixing fly proof wire gauze to windows,clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete.including carriage of materils within all leads and lifts and as per the direction of Engineer-In- Charge.

Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides

Providing and fixing powder coated Aluminium sliding door bolts ISI marked transparent or dyed to required shade and colour with bolts and nuts etc. complete including carriage of materials in all leads and lifts:-as per the direction of Engineer-In- Charge.

Providing and fixing powder coated Aluminium tower bolts (Berrel type) transparent or dyed to required shade and colour with screws etc. complete including carriage of materials in all leads and lifts:-as per the direction of Engineer-In- Charge.

Providing and fixing powder coated Aluminium handles transparent or dyed to required colour or shade with necessary screws etc. complete including carriage of materials in all leads and lifts :-as per the direction of Engineer-In- Charge.

Providing & fixing Powder coated aluminium hanging floor door stopper ISI marked with transparent or dyed to required shade and colour with screws etc. completeto suit shutter thickness complete including carriage of materials in all leads and lifts :-as per the direction of Engineer-In- Charge.

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. including carriage of materials in all leads and lifts :-as per the direction of Engineer-In- Charge.

Providing & fixing 115 mm bright finished brass hasps and stapples (safety type)with necessary screws including carriage of materials in all leads and lifts :-as per the direction of Engineer-In- Charge.

Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. including carriage of materials in all leads and lifts :-as per the direction of Engineer-In- Charge.

P/F 65X35 mm special CP brass cup board locks or ward robe locks with six levers including necessary screws etc complete.including carriage of materials in all leads and lifts :-as per the direction of Engineer-In- Charge.

Providing and fixing 50 mm CP brass cup board or ward robe knob with nuts complete..including carriage of materials in all leads and lifts :-as per the direction of Engineer-In- Charge.

Providing and fixing 18 mm thick, 150 mm wide pelmet of flat pressed 3 layer or graded wood particle board medium density grade I, IS : 3087 marked, including top cover of 6 mm commercial ply wood conforming to IS: 303 BWR grade, nickel plated M.S. pipe 20 mm dia ( heavy type) curtain rod with nickel plated brackets, including fixing with 25x3 mm M.S. flat 10 cm long fixed to pelmet with hollock wood cleats of size 100 mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75 mm long etc.including carriage of materials in all leads and lifts :-as per the direction of Engineer-In- Charge.

Providing and fixing cup board shutters 25 mm thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked, exterior grade (Grade l Type ll), having one side decorative lamination and other side balancing lamination, including IInd class teak wood lipping of 25 mm wide x12 mm thick with necessary screws and bright finished stainless steel piano hinges, including carriage of materials in all leads and lifts as per direction of the Engineer-in-Charge

Providing and fixing 19mm (nineteen milimetre) thick water proof, termite resistant commercial board in shelves /box for cup boards with butt joints and fixing with nails and screws etc complete including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge.

Providing and fixing 1.00 mm ( one milimetre) thick coloured or plain lamination sheet sunmica on board /ply wood sheets with approved adhesive and nails complete including carriage of material within all leads and lifts and as per the direction of Engineer-In-Charge.

Providing and fixing 6 mm ( eight milimetre) thick ply wood back side of cup board lining with butt jointing and nails ( frame work and covver fillets to be measured and paid for separately) including carriage of material within all leads and lifts and as per the direction of Engineer-In-Charge.

Providing and fixing 40mm thick plain framed panelling with necessary screws priming coat on unexposed surfaces etc. complete with. 2nd class deodar wood. including carriage of material within all leads and lifts and as per the direction of Engineer-In-Charge.

Providing and fixing 2nd class teak wood lipping/ moulded beading or taj beading of size 18X5 mm fixed with wooden adhesive of approved quality and screws/nails on the edges of the Pre-laminated particle board including carriage of material within all leads and lifts and as per direction of Engineer-in-charge.

Providing and fixing Everest designer fibre board tiled ceiling of specified materials of size 600X600 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.

Providing and fixing 12 mm thick HDF AC5 flooring alongwith skirting of ARMSTRONG or its equivalent placed over cushion of 2 mm. Thick expended polethene foam plus 100 Microne thick polethene sheet under lay No. 045 Beech West including border of required shade and colour complete in all respect upto all floor levels as per direction of Engineer in charge including carriage of materials in all leads and lifts.

Providing and laying mirror polished Kota stone slab of size 55x55 CM in flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) including carriage of material within all leads and lifts and as per the direction of Engineer-In-Charge. 25mm thick

P/F Mirror polished Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete including carriage of material within all leads and lifts and as per direction of Engineer-in-charge. 25mm thick

Providing and laying double charged vitrified floor tiles of size 60x60 cm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete including carriage of material within all leads and lifts and as per direction of Engineer-in-charge.

Providing and laying vitrified floor tiles of size 60x60 cm. Thickness to in (thickness to be specified by the manufacturer) with water absorption less than 0.08% and nforming to IS 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc.,including rubbing and polishing complete.including carriage of material within all leads and lifts and as per direction of Engineer-in-charge.

40 mm thick rubbed stone flooring /skirting over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) with joints 3 mm thick, side buttered with cement mortar 1:2 (1 cement : 2 stone dust) admixed with pigment to match the shade of stone and pointing with same mortar including carriage of material within all leads and lifts and as per direction of Engineer-in-charge.

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc. including carriage of material within all leads and lifts and as per direction of Engineer-in-charge.

Providing and fixing 1st quality ceramic glazed wall tiles 30x45 cm conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete..including carriage of material within all leads and lifts and as per direction of Engineer-in-charge.

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete..including carriage of material within all leads and lifts and as per direction of Engineer-in-charge.

Providing and fixing machine cut, mirror/ eggshell polished , Marble stone work for wall lining (veneer work) including dado, skirting, risers of steps etc., in required design and pattern wherever required, stones of different finished surface texture, on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) laid and jointed with white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing etc. all complete as per Architectural drawings, and as directed by the Engineer-in-Charge.“a. 18 mm thick Italian Marble stone slab,Perlato, Rosso verona, Fire Red or Dark Emperadore etc..including carriage of material within all leads and lifts and as per direction of Engineer-in-charge.

Provinding and laying 40 mm thick Cement concrete flooring 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) laid in one layer finished with a floating coat of neat cement including carriage of materials within all leads and lifts as per the directions of Enngineer-in-Charge.

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required..including carriage of material within all leads and lifts and as per direction of Engineer-in-charge.

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete .including carriage of material within all leads and lifts and as per direction of Engineer-in-charge.

Ridges plain (600mm)

Valley plain (Upto 600 mm)

Flashing/Aprons (upto 400 mm)

gutter 300 mm wide (900 mm over all girth)

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A,including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Singlesocketed pipes.including carriage of material within all leads and lifts and as per direction of Engineer-in-charge. 150mm

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion..including carriage of material within all leads and lifts and as per direction of Engineer-in-charge.

150 mm bend/ door bend

150 mm plain shoe

Providing and fixing 150 mm unplasticised-PVC pipe clamps of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc.including carriage of material within all leads and lifts and as per direction of Engineer-in-charge.

Providing and fixing M.S. BP Sheet 2mm thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely) including carriage of material within all leads and lifts and as per direction of Engineer-in-charge.

Structural steel work including hollow section riveted, bolted or welded in built up sections, trusses and framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer all complete including carriage of material within all leads and lifts and as per direction of Engineer-in-charge.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.

In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete. including carriage of material within all leads and lifts and as per direction of Engineer-in-charge.

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). including carriage of material within all leads and lifts and as per direction of Engineer-in-charge.

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture. including carriage of material within all leads and lifts and as per direction of Engineer-in-charge.

Applying priming coat on new concrete / plastered surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand tapering as required with ready mixed primer.including carriage of material within all leads and lifts and as per direction of Engineer-in-charge.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete..including carriage of materials within allleads and lifts.as per direction of Engineer-in-charge.

6mm cement plaster to ceiling in cement mortar 1:3 (1 cement : 3 sand) including carriage of materials within all leads and lifts in all floor levels including carriage of materials within allleads and lifts :-

15mm cement plaster in single coat on the rough side of brick/concrete/stone walls for interior plastering upto all floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 30cm in girth and finished even and sand opapered smooth including carriage of materials within allleads and lifts.as per direction of Engineer-in-charge..

15mm cement plaster in single coat as pattern shown at corner on the fair side of brick/concrete/stone walls for interior plastering upto all floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 30cm in girth and finished even and sand opapered smooth including carriage of materials within allleads and lifts..

15mm (fifteen milimetres) thick cement plasters in single coat on rough /fair side of brick/concrete/stone walls for interior/exterior plastering upto all floor level including arises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty milimetres) in girth and finished even and smooth with cement mortar 1:4 (one cement: Four sand) including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge. (i) Cement mortar 1:4 (one cement is to Four sand)

Finishing walls with Acrylic Smooth exterior paint of required shade brand and manufacture for interior grade on undecorated on crete/ stone/ plasteredwall sufaces to give an even shade including t horoughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required for metling the surface.including carriage of materials within allleads and lifts.as per direction of Engineer-in-charge...

New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.including carriage of materials within allleads and lifts.as per direction of Engineer-in-charge.

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge

15 mm dia nominal bore

20mm nominal bore :-

Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall :including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge.

15 mm dia nominal bore

20mm nominal bore :-

Making connection of G.I. distribution branch with G.I.main of following sizes by providing and fixing tee,including cutting and threading the pipe etc. complete : 25 to 40 mm nominal bore including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement of various capicity and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge. (1000 litres net capacity tank)

Fixing water meter and stop cock in G.I. pipe line including cutting and threading the pipe and making long screws etc. complete (cost of water meter and stop cock to be paid separately). 20mm nominal bore :-including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge.

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fitting with approved adhesive etc.-including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge.

150 mm dia

110 mm dia

Providing and fixing PVC clamps ISI marked of approved design with steel screws and rawal plugs etc.including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge.

150 mm dia

110 mm dia

Providing and fixing PVC door bend with oval acces door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etcincluding carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge.

150 mm dia

110 mm dia

Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge.

150 mm dia

110 mm dia

Providing and fixing PVC single equal branch with oval access door , ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc.including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge.

150 mm dia

110 mm dia

Providing and fixing PVC single equal branch plain ISI marked including fixing with approved adhesive etc.including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge.

150 mm dia

110 mm dia

Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc.including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge.

150 mm dia

110 mm dia

Providing and fixing PVC cowl including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge.

150 mm dia.

110 mm dia.

Providing and fixing PVC floor traps ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc.including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge.

110 mm x 90 mm

Providing and fixing PVC 'P' or 'S' trap for water closet ( squatting pan) ISI marked including jointing the trap with the pan and PVC pipe with approved adhesive etc. complete. (150mm) including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge.

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.10 litre capacity - White including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. : 32 mm dia Flexible pipe including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge.

Providing and fixing uplasticised PVC connection pipe with brass unions :45cms length & 15mm nominal bore including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge

Providing and laying 150 mm dia ( to level or slopes) and jointing with approved adhesive high pressure PVC spigot and socket waste and ventilating pipe 150 mm dia in trenches.including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge

Providing and fixing white vitreous china water closet squatting pan (Indian type) : White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge.

Providing and fixing white vitreous china (European type/ wash down type) water closet pan. European type WC pan No 2090 (PRIMA) of CERA / HINDWARE including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge.

Providing and fixing plastic seat (solid type) and cover for wash down water closet with C.P. Brass hinges and rubber buffers. White plastic seat and cover (solid type) with C.P. Brass hinges and rubber buffers. including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: Flat back :- White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge.

White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required Kitchen sink with drain board 610x510 mm bowl depth 200 mm without drainage board.including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge

Providing and fixing C.P. brass waste (heavy duty ISI marked IS:8931 & 8934) for wash basin or sink including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge.

Providing and fixing 100 mm sand CP grating for gully trap.including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge.

Providing and fixing C.P. brass towel rail (heavy duty ISI marked IS:8931 & 8934) complete with C.P. brass brackets fixed to wooden plugs with C.P. brass screws 600 X 20 mm including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge

Providing and fixing Acrylic shelf with C.P. brass bracket and guard rail complete, fixed to wooden plugs with C.P. brass screws including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge.

Providing and fixing C.P. brass bib cock with CP flange of approved quality conforming to IS:8931 : 15mm dia including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge

Providing and fixing CP brass pillar tap of jaquar with capstan head (heavy duty ISI marked IS:8931 & 8934) : 15mm dia including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge.

Providing and fixing C.P. brass angle valve with CP flange for wash basin / mixer and geyser points of approved quality conforming to IS:8931 : 15mm dia including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge

Providing and fixing CP Brass toilet paper holder :including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357 mm including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge.

Providing and fixing brass full way valve with wheel including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge. 15mm nominal bore

20mm nominal bore :-

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) :3 graded stone aggregate 20 mm nominal size),foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge

Inside size 90x80 cm and 45 cm deep including Precast RCC Cemocrate or equivalent cover with frame (heavy duty) of size 455x610 mm internal dimensions,

With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Precast RCC Cemocrate or equivalent (Heavy Grade) cover with frame forgully trape (Standard Pattern):

Inside size 120x90 cm and 90 cm deep including Precast RCC Cemocrate or equivalent cover with frame (heavy duty) of size 455x610 mm internal dimensions,

With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge

Supplying and filing 300x300 mm Precast RCC Cemocrate or equivalent ( Heavy Grade) cover with frame forgully trape (Standard Pattern brick bats in soakpit of following sizes including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge

roviding and fixing in position pre - cast RCC manhole cover and frame of required shape and approved quality LD-2.5 Rectangular shape 600 x450 mm internal dimensions including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge

Supplying and filing brick bats in soakpit of following sizes including carriage of materials within all leads and lifts including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge