Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹23.2 LAccepted-AOC 51 212D 3E K V NAGAR NEAR ADARSH NAGAR KHERIA MOD AGRA UP 282001 | AGRA | UTTAR PRADESH | 282001 | 1 | Accepted-AOC Due to L-1 and credit | |
| 2 | 2₹25.3 L+₹1.4 L (5.67%)Rejected-Finance 59 100 AJIT NAGAR GATE KHERIA AGRA 282008 | AGRA | AGRA | UTTAR PRADESH | 282008 | 2 | Rejected-Finance Being other than L-1 | |
| 3 | 3₹25.5 L+₹1.6 L (6.74%)Rejected-Finance DADAWA KURIYAR KHAS BASTI BASTI UTTAR PRADESH 272178 | BASTI | UTTAR PRADESH | 272178 | 3 | Rejected-Finance Being other than L-1 | |
| 4 | 4₹25.9 L+₹2.0 L (8.36%)Rejected-Finance 60 310A 3 KHERIA MOD JAGNER ROAD AGRA 01 | AGRA | UTTAR PRADESH | 282001 | 4 | Rejected-Finance Being other than L-1 | |
| 5 | 5₹26.9 L+₹3.0 L (12.4%)Rejected-Finance | 5 | Rejected-Finance Being other than L-1 |
Tender Value
₹38.8 L
EMD Value
₹77,600
Closing Date
4 Sept 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) ADM AREA AGRA
GE (AF) Adm Area Agra UP 282008
SPECIAL REPAIR / REPLACEMENT TO TOILETS OF SINGLE LIVING IN ACCOMMODATION AT UNDER GE (AF) ADM AREA AT AF STN AGRA. (RECALL)
2024_MES_645501_2
8000-2123/E8
Open Tender
Civil Works
Item Rate
180 days
GE (AF) ADM AREA AGRA
Please refer Tender documents.
4 documents required · 4 mandatory
₹500
GE (AF) ADM AREA AGRA
₹77,600
Yes
27 Sept 2024
19 Jul 2024
6 Sept 2024
19 Jul 2024
4 Sept 2024
26 Jul 2024
Amount
M&L for brick work with fly ash bricks, old size, class designation 75, straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar 1:6 including demolition of brick work or stone/ boulder masonry built in cement mortar including all quoins, arches, pillars etc. but excluding ashlars facing, dressed stone work & precast concrete articles complete all as specified and directed.
Taking down cement plaster on walls/ceiling of any description including racking out joints hacking for key, scrubbing down with water etc. and removing rubbish complete all as specified and directed.
M&L for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:4 finished fair and even complete all as specified and directed.
M&L for rendering 15 mm thick on fair faces of brick work or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 5 mm thick on concrete surfaces of ceiling with CM (1:4) and finished fair and even complete all as specified and directed.
M&L for washed stone grit plaster on exterior walls in two layers, under layer 12 mm thick in cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square meter, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings including taking down of old plaster complete all as specified and directed. Note : Making grooves(of uniform size 15 mm x 15 mm) shall be included in quoted rates.
M&L for scraping out loose mortar/concrete by chiseling/ wire brushing complete and applying rust removing solution (rebaklene solution) to exposed corroded reinforcement and applying a coat of epoxy primer (Nitozink primer from M/s Fosroc or equivalent as approved by GE) as per manufacturer instructions providing and fixing of wire mesh of weight not less than 2.5 Kg per Sqm and apply screed 25 mm average thickness in CM (1:4) mixed with liquid integral water proofing compound (complast 'X' as per manufacture instructions with gunitting machine at a pressure not less than 5 Kg/Sqcm finally rendering 10mm thick plaster in CM (1:4) using liquid integral water proofing compound (complast 'X' 421 i.e. from M/s Fosroc and Nitobound AR from M/s Fosroc or equivalent as approved by GE) as per manufacture instructions complete all as specified and directed. Note :- Location such as RCC column, lintels, beams and ceiling slab etc.
M & L for applying two coat of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm, over 1 mm thick wall care putty and a coat of alkali resistance priming paint exterior grade applied @ 0.90 litre/ 10 sqm on newly plastered external surfaces including preparation of surfaces complete all as specified and directed . Note : Apply second coat after first coat is dry approx 6-8 hours between two coat and Colour code of paint as approved by GE
M&L for applying three coats of white wash on wall including preparation of new surface complete all as specified and directed.
M&L for preparation of new surface of wall and applying wall care putty minimum 1 mm thick, a coat primer and two coats of oil bound distemper over a coat of clear cholle primer complete all as specified and directed.
M&L for applying three coats of white wash on ceiling including preparation of new surface complete all as specified and directed.
M & L for applying two coat of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm, over a coat of alkali resistance priming paint exterior grade applied @ 0.90 litre/ 10 sqm on old plastered external surfaces including complete removal of existing any type of decorated surface by means of mechanical equipment and preparation of surfaces complete all as specified and directed . Note : Apply second coat after first coat is dry approx 6-8 hours between two coat and Colour code of paint as approved by GE
M & L for complete removal existing treatment from old decorated surface of walls and applying two coats of oil bound distemper of required shade and colour, over a coat of primer, including 1mm thick wall care putty, as per manufacturer's specification, including preparation of surfaces complete all as specified and directed
M&L for preparation of old plastered or unplastered surface of ceiling including brooming down by steel wire brushes, scrapping down smoke spot moulds, moss and efflorescent salts, trading oils and greasy spots and applying one coat of white wash complete all as specified and directed.
M&L preparation of old painted surface of wood and wood based material of any description area exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L preparing old painted surface of steel/iron of any description area exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for RCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in the shelves and the like including demolition of existing slab complete all as specified and directed.
Use and waste Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping) complete all as specified and as directed.
M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
M&L for granite stone 18-20 mm thick (of any type) glazed (table rubbed and polished) fixed as in skirting, steps, jambs, pillars, window cills, cooking plateform and the like set in cement mortar 1:4 and pointed with white cement (1:2) using marble dust with admixture of pigment to match and exposed edges rounded with and including screed bed or bedding layer of mortar 10 mm thick in cement mortar 1:4 and dismantling of existing slab complete all as specified and directed.
M&L for machine cut kota stone slab of size not less than 550 x 550 mm (except where lesser size required) as in flooring or in trades of steps 20 to 25 mm thick and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing, rounding of edges and mirror finish polishing with & including screed bed or bedding layer of mortar 20 mm thick in cement mortar 1:4 for laying floor finishes including dismantling of existing stone complete all as specified and directed
M&L for machine cut kota stone 20 to 25 mm thick as in steps, risers, skirting, dado etc., bedded and jointed with grey cement slurry and pointed in white cement with admixture of pigment to match the shade of the stone including grinding, rubbing and polishing with & including rendering 15 mm thick in cement mortar 1:4 finished rough to fix stone and taking down existing stone/plaster complete all as specified and directed.
M&L for 40 mm thick cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in flooring finished even and smooth using extra cement including demolition of cement concrete as in floor complete all as specified and directed.
M&L for 75 mm thick cement concrete type C1 1:3:6 (using 20 mm stone graded crushed stone aggregate) as in plinth protection surface finished even and fair including forming construction (dummy) joints 6 mm wide & 10 mm deep and filled with filler at an interval not exceeding 3 metre and at change of direction including demolition of existing plinth protection complete all as specified and directed.
Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided and removal of debries outside defence land complete all as specified and directed.
M&L for cement concrete 1:2:4 type B-0 (12.5 mm graded stone aggregate) as in levelling / maintaining slope in sunken portion etc. complete all as specified and directed.
M & L for PCC 1:5:10 type E-2( using 40 mm graded brick aggregate) as in filling in sunken floor of toilet and bath room etc. complete all as specified & directed.
M&L for screed bed or rendering 15 mm thick in averaging in cement mortar 1:3 mixed with and including liquid water proofing comound @ 200 ml per bag of cement finished even and smooth without using extra cement complete all as specified and directed. (Rate of Water proofing compound shall deemed to be included under this item).
M&L for non skid ceramic coloured tiles 7 to 8 mm thick joint less (square or rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with & including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes and dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed.
M&L for glazed ceramic designer coloured tiles of size 300 x 200 x 6-7 mm thick in vertical surface set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface with & including rendering 10 mm thick in cement mortar 1:4 on other than fair faces of brick wall finished rough to fix tiles and dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed.
Supply, fixing, laying & testing 15 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors and testing including taking down existing GI tubing complete all as specified and directed.
Supply, fixing, laying & testing 20 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors and testing including taking down existing GI tubing complete all as specified and directed.
S&F in repair vitreous china squatting pan Orissa pattern size 580 x 440 mm white with front or back inlet, integral foot rest including connection to trap and flushing pipe, anti syphonage and providing cement concrete bedding complete all as specified and directed.
S&F in repair Anglo Indian type viterous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) and including Plastic water closet seat cover white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.
S&F in repair PVC (SWR) pipe 110 mm bore, single socketed, in any length with rubber ring joints and laid on floors or fixed to walls with clamps complete all as specified and directed.
S&F in repair PVC (SWR) pipe 75 mm bore, single socketed, in any length with rubber ring joints and laid on floors or fixed to walls with clamps complete all as specified and directed.
S&F in repair 75 mm dia PVC (SWR) floor trap, with CP grating including jointing to waste pipe with solvent cement and fixed in cement concrete 1:2:4 type B1(using 20 mm graded stone aggregate) complete all as specified and directed.
S&F PVC (SWR) bend 110 mm dia, any radius with access door complete all as required and as directed.
S&F PVC (SWR) bend 75 mm dia, any radius with access door complete all as required and as directed.
S&F in repair tripple layer rotational moulded polyethylene water storage tanks 500 lts capacity (cylinderical vertical with closed top) hoisted and fixed in position with and including ball valve 20 mm bore high presure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight not less than 210 grams) complete all as specified and directed.
S&F in repair tripple layer rotational moulded polyethylene water storage tanks 1000 lts capacity (cylinderical vertical with closed top) hoisted and fixed in position with and including ball valve 20 mm bore high presure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight not less than 210 grams) complete all as specified and directed.
S&F in repair 20 mm bore gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.
S&F in repair ball valve 20 mm bore high presure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight not less than 210 grams) complete all as specified and directed.
S&F in repair 10 Ltrs capacity, PVC valveless, syphonic action type, low level flushing cistern, white, with inlet, ball valve, float and handle complete with all internal accessories and fixed to wall, PVC flush pipe 32 mm dia 90 cm long fixed properly to inlet of WC and making good to disturbed surfaces of wall or floor complete all as specified and directed.
S&F in repair long body bib taps, cast copper alloy, fancy type, chromium plated with crutch or butterfly handles, screwed down, screwed for 15 mm bore GI pipe or for brass ferrule or to GI socket complete all as specified and directed.
S&F in repair chromium plated brass shower rose 125 mm dia with or without swival joints, with CP long shank including fixing to 15 mm dia pipe or union all as specified.
S&F in repair stainless steel grating doom with or without hole 100mm dia complete all as specified and as directed.
S&F in repair pillar taps, cast copper alloy with capston heads, fancy type, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and flynuts screwed for 15mm bore iron pipe and fixed complete all as specified and directed.
S&F in repair stop valve/angle valve 15 mm nominal bore cast copper alloy, fancy type, chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specified and directed.
S&F in repair stop valves 15 mm nominal bore, cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type), screwed down, high pressure with crutch or butterfllly handles, screwed both ends for iron pipe or for brass ferrule or to GI socket complete all as specified and directed .
S&F in repair PVC connection 600 mm long suitable for 15 mm GI pipe with two PTMT nuts & rubber washers complete all as specified and directed.
S&F in repair cast iron sand cast soil, waste and vent pipe 100 mm bore in any length with or with out ears with cement joints fixed to wall complete all as specified
S&F in repair cast iron sand cast soil, waste and vent pipe 100 mm bore in any length with or with out ears with cement joints laid in trenches or in floor including necessary earthwork and demolition of PCC haunching etc. complete all as specified and directed.
S&F in repair cast iron sand cast soil, waste and vent pipe 75 mm bore in any length with or with out ears with cement joints laid in trenches or in floor including necessary earthwork and demolition of PCC haunching etc. complete all as specified and directed.
S&F cast iron branch pieces single (equal or unequal) ordinary or inverted, spigot or socket type or with parallel branches with oval access door suitable for 100 mm bore pipe complete all as specified and directed.
S&F cast iron branch pieces single (equal or unequal) ordinary or inverted, spigot or socket type or with parallel branches with oval access door suitable for 75 mm bore pipe complete all as specified and directed.
S&F CI cowl 100 mm bore fixed with cement joint complete all as specified and directed.
S&F 100 mm bore CI bend/Tee duck foot or heel rest (any radius) complete all as specified and directed.
S&F 75 mm bore CI bend/Tee duck foot or heel rest (any radius) complete all as specified and directed.
S&F SGSW gully trap, 150 x 150 mm, square or round mouthed type 'P' or 'S' including CI grating setting and jointing with solvent cement complete all as specified and directed.
S&F in repair steel tank cover with zinc coating, dia of cover 500 mm and height 150 mm of cut spherical shape and gas welding if spikes 2 mm dia and 50 mm length at 50 mm c/c both bay in zig zag motion with MS hinges 50 mm long medium weight, hasp and staple 100 mm long fixed to existing PVC water storage tank of any capacity and binded with barbed wire 2 mm dia and 2.24 mm bards 75 mm c/c all around the tank cover complete all as specified and directed.
S&F in repair vitreous china wash hand basin white flat back size 450x 300 mm including two Nos angle iron brackets including 32mm dia CP waste coupling, waste pipe and 450 mm long, PVC connection with 02 Nos brass nuts and rubber washer complete all as specified and directed.
S&F in repair vitreous china half stall urinal of size 345 x 320 x 560 mm, white excluding flushing cistern, flush pipe and waste pipe but including grating and union for discharge pipe complete including providing and fixing plus, beding urinal agianst wall in cement mortar 1:2 securing urinal to plus with and including 60mm long brass screws, pointing aroiund urinal back in cement complete all as specified and directed.
S&F in repair soap dish, vitreous china coloured, approximate size 160 x 160 x 90 mm fixed to rawl plugs with chromium plated brass screws & washers complete all as specified and directed.
S&F 20 mm dia brass chromium plated tubular towel rail, 60 cm long between flanges including all accessories like brackets etc. fixed with rawl plug and CP brass screws complete all as specified and directed.
S&F sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed .
Taking down Chowkats or frames with shutter (without taking off shutters from the frame) n. exc. 1.50 Sqm each complete all as specified and directed.
S&F factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm single side prelaminated PVC sheet & edges painted to match with prelaminated sheet and fixed with screws and rawl plugs complete all as specified and directed.
S&F Factory made solid PVC moulded door shutter with particle board core, 28 to 30 mm thick (stiles), with 2, 4 or 6 raised panel design with 5 mm thick moulded prelaminated PVC Sheet on the front face & 5 mm prelaminated PVC sheet on back face, supplying & fixing in frame at site as per specifications & drawings shown in section 8 of SSR Part II complete all as directed.
Taking down Chowkats or frames with shutter (without taking off shutters from the frame) exc. 1.50 sqm and not exc. 4.00 sqm each complete all as specified and directed.
Taking down shutters of any description exc 1 sqm & not exc 2 sqm each complete all as specified and directed
S&F framed work with rolled mild steel sections as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing conforming to Fe-290 (Gde E-165) complete all as specified and directed.
S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
M&L for 2nd class hard wood Kiln seasoned and chemically pressure treated glazed and skeleton shutters 35 mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (a); supplied and fitted to chowkhats complete all as specified and directed.
S&F 100 mm size stainless steel, butt hinges, medium weight ISI marked and fixed with screws complete all as specified and directed.
S&F aluminium anodised barrel tower bolt of extruded section 150 mm long ISI marked and fixed complete all as specified and directed.
S&F alumunium handle, fabricated type, anodised 150 mm long ISI marked complete all as specified and directed.
S&F aluminum alloy anodized sliding door bolt 250 mm long with hasp and staple (bolt type) and fixing clip of sheet and cast in extruded section and fixing bolts and sliding bolt of extruded section complete all as directed and directed.
Taking down shutters of any description n. exc. 1 Sqm each complete all as specified and directed.
S&F Box type steel windows/ventilators with side hung shutters with glazed and gauzed double panel shutters both provisions including box type hinges or factory made butt hinges with steel handle, tower bolts, hold fasts and steel peg stays etc. complete without glazing bars dovetailed or welded and 10mm square guard bars @ 125mm c/c both way complete as per drg No. CE/ALD/TD-172 sheet No 1/2 to 2/2 complete all as specified and directed. Note: Wire cloth and glass shall be measured and paid separately.
M&L plain cement concrete 1:3:6 type C-1 using 20mm graded stone aggregate as in hold fast and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and directed.
M&L for 2nd class hard wood glazed and skeleton shutters 30 mm thick, open rebated and prepared to receive glass, gauze, etc. divided into squared, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (b); supplied and fitted to chowkhats complete all as specified and directed.
S&F 0.36 mm dia stainless steel wire cloth with average width of aperature 1.40 mm and fixed with stainless steel wire staples or moulded beading complete all as specified and directed.
S&F 3 mm thick sheet glass ordinary quality and fixing with wooden beads or oil putty and provsion of glazing pins in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.
S&F 75 mm size stainless steel, butt hinges, medium weight ISI marked and fixed with screws complete all as specified and directed.
S&F alumunium handle, fabricated type, anodised 100 mm long ISI marked complete all as specified and directed.
S&F aluminium anodised barrel tower bolt of extruded section 125 mm long ISI marked and fixed complete all as specified and directed.
S&F in repair 0.36 mm dia stainless steel wire cloth with average width of aperature 1.40 mm and fixed with stainless steel wire staples or moulded beading complete all as specified and directed.
S&F 3 mm thick sheet glass ordinary quality and fixing with wooden beads or oil putty and provsion of glazing pins in squares not exceeding 0.50 Sqm in each pane including hacking out old broken glass of any description and thickness from wooden/steel frames fixed with wooden beads/putty and complete all as specified and directed.
S&F figured glass, 3 mm thick, pin head type and glazing with oil putty or wooden beads in squares n. exc. 0.50 Sqm in each pane including hacking out old broken glass of any description and thickness from wooden/steel frames fixed with wooden beads/putty and complete all as specified and directed.
M&L for preparation of new or previously untreated surfaces of wood or wood based materials of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L for preparation of new or previously untreated surfaces of steel or iron of any description over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
S&F mild steel framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.
Dismantling of existing roof treatment of any thickness including tar felt, cement plaster, leaping plaster etc. from roof surfaces, cutting tree roots/ vegitation growth including cleaning of surface and removing debris upto 500 m outside the MOD land complete all as specified and directed.
M&L for cement concrete 1:2:4 type B-0 (12.5 mm graded stone aggregate) as in levelling / maintaining slope over roof slab or terrace mixed with and including liquid water proofing comound @ 200 ml per bag of cement complete all as specified and directed. (Rate of Water proofing compound shall deemed to be included under this item).
M&L for screed bed or rendering 10 mm thick in averaging on RCC roof slab/parapet in cement mortar 1:3 mixed with and including liquid water proofing comound @ 200 ml per bag of cement finished even and smooth without using extra cement complete all as specified and directed. (Rate of Water proofing compound shall deemed to be included under this item).
M&L for cleaning of roof surface and applying water proofing treatment to roof slab including vertical surface with APP based polymeric membrane, 3 mm thick (min.) consisting of 90 to 100 micron thick central core of HMHDP film and standard weight of 3.00 kg/sqm reinforced with polyster non woven fabric (weighing not less than 160 gm / sqm ) applied over a coat of hot blown bitumen 85/25 conforming to IS-702 @ 1.20 Kg/Sqm over a coat of bituminous primer @ 0.30 ltrs/Sqm surface, application of APP modified membrane and joint shall be sealed by torch application. The overlaps shall be minimum 15 mm on end lap and 100 mm side lap complete all as specified & directed. Note : (i) Treatment shall be done through authorised representative of manufacturer.
Taking down copper/ aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors etc. to match the existing complete all as specified and directed. NOTE: Credit for this items shall be made as per conditions separately.
M&L for point wiring complete for one light/fan/ exhaust fan point controlled by one, one way 5 Amp switch with PVC (FRLSH) insulated unsheathed multistranded copper conductor of size 1.50 sqmm nominal cross sectional area single core drawn in and including minimum 20 mm dia 'medium grade' PVC concealed conduits ISI marked and fittings, including anodised pressed steel concealed terminal switch boxes not less than 1.20 mm thick of reqd size factory made duly painted inside and outside with one coat red oxide primer, 3mm thick plastic laminated bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers complete including 1.50 sqmm nominal cross sectional area PVC(FRLSH) insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories including cutting chases for concealed piping and making good disturbed surface to match the existing surface complete all as specified and directed.
All as per item No. 100 above but for one 5 pin 5 Amp socket outlet point on the same board with other switch.
All as per Item No 100 above but for one 6 pin 15/16 amps socket outlet point on an independent board with cables of size 2.50 Sqmm and green colour earth cable of size 2.50 Sqmm.
S&F Switch piano, flush type, single pole, one way 5/6 Amp 230 Volts complete all as specified and directed.
S&F Switch piano, flush type, single pole, one way 15/16 Amp 230 Volts complete all as specified and directed.
S&F socket outlet, flush type, single pole, 2 in 1, 5 pin 5/6 Amp, 230 volts complete all as specified and directed.
S&F socket outlet, flush type, single pole, multipurpose 2 in 1, 6 pin 5/6 and 15/16 Amp, 230 volts complete all as specified and directed.
S&F ceiling rose, 3 terminal, PVC/ Polycarbonate, insulated body, surface bakelite sheet 63.50 mm dia complete all as specified and directed.
S&F in replacement existing U/S light fitting with energy saving decorative LED batten 20 watt (4 Feet), 230 voltas, energy efficient tube light fitting extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffusre & integrated electronic driver complete with all accessories prewired and includeing making connections with 3 core twisted flexible copper cable of size 23/.0076 from ceilling rose/PVC connector to light fittings complete all as specified and directed. Note:- Power factor should not be less thtn 0.95 Make- Halonix Cat part No- HLTLD-04-20-CW, ORIENT Cat part No-LBLN-20-C-AL /Philips Cat part No- BN021C LED22S PSU CW GR
S&F in replacement of old U/S tube light fitting with energy saving decorative batten type 10 watt energy efficient tube light fitting (2 Feet) highly durable surface mounted LED batten constructed of fire retardent engineering grade extruded plastic and decorative end caps with all accessories prewired and making connection with 3 core copper flexible cable of size 23/.0076 from ceilling rose/PVC connector to light fittings complete all as specified and directed. Make- ORIENT Cat part No-LBLN-10-C-SQ/Philips cat part- BN021LED12S6500PSUGR, Halonix Cat part No- HLTLD-04-10-CW
S&F exhaust fan of 300mm sweep, AC single phase 230/240 volts, 1400 rpm steel body complete with louvers including making electric connection with PVC insulated three core 1.5 Sqmm copper cable from ceiling rose to exhaust fan, grouting anchor bolts/fastners including cutting and opening of hole for fixing of exhaust fan through wall, circular or rectangular in shape including making good the disturbed surface surrounding by plastering, finishing and colouring complete all as specified and directed.
Supply and fixing electric water heater, storage type ABS body with stainless steel inner tank and heating element upto 2 KW capacity, 25 litre, BEE 5 star rating complete with all accessories such as safety valve, thermostate, connection pipe etc. complete all as specified and directed. Make: Havells model No. GHWAPUTPI025 / Crompton model SOLARIUM NEO/ Bajaj model CALENTA DIGI
deva engineers (BID ID -3082576)
Abhi Construction (BID ID -3080653)
rohan traders (BID ID -3083513)
shree shyam construction (BID ID -3078547)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .