Repair/Maintenance of sunken flooring, plastering, plumbing work, water proofing treatment work and periodical services for OTM or Md Accn at transit camp under GE Nagrota.

Amount

Demolition of cement concrete of any description and any position not otherwise specifically provided, complete all as specified and directed.

M&L for hard core of broken bricks/stone boulder n exc 63 mm, deposited, spread and levelled in layers n exe 15 cm thick, watered and rammed to a true surface, complete all as specified and directed.

M&L for 25 mm thick PCC, 1:2:4, type B-0 (using 12.5mm graded crushed stone aggregate) as in sub floor including 3% WPC of cement, complete all as specified and directed.

M & L for 10 mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 with using WPC (WPC to be measured and paid separately) finished even and smooth without using extra cement, complete all as specified and directed.

M & L for an elastic liquid applied , creck bridging 2 pack acrylic polymer modified cementitious waterproffing coating system primer coat Sika Top Seal - 109 hi Primer consumption primer coat 0.2 kg/sqm ,Base coat Sika Top Seal - 109 hi consumption base coat 0.7 kg/sqm Top coat Sika Top Seal - 109 hi consumption primer coat 1.5 kg/sqm Density 1.6 kg/ltrbond strength 2.0 N/mm OR Nitco Proof 100 & 120 of M?S Fosrock chemical ( priming coat of Nitoproof 100 & one susequent coat of Nitoproof 120 ) all as per manufacturing instruction, complete all as specified and directed.

M & L for Glazed ceramic coloured tiles in vertical surface 450x350x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles over and including 10 mm thick screed bed or beddding layer of CM 1:3 including dismantling of existing tiles, complete all as specified and directed.

M & L for Glazed ceramic coloured tiles in vertical surface 300x200x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles over and including 10 mm thick screed bed or beddding layer of CM 1:3 including dismantling of existing tiles, complete all as specified and directed.

M&L for non skid ceramic colour tiles 8 to10mm thick (square/rectangle) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm,in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20 mm thick screed bed or beddding layer of CM 1:6 including dismantling of existing tiles, complete all as specified and directed.

M&L for non skid ceramic colour tiles 8 to10mm thick ( square/rectangle) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20 mm thick screed bed or beddding layer of CM 1:6 including dismantling of existing tiles, complete all as specified and directed.

Taking down cement plaster on brick or stone wall etc including raking out joints, hacking for key, scrubbing down with water, complete all as specified and directed.

Supply only integral water proofing compound, complete all as specified and directed.

M & L for 15 mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4, finished even and smooth without using extra cement, complete all as specified and directed.

Preparation of new plastered or unplastered surfaces of walls and applying two coats of white wash, complete all as specified and directed.

S & F 15mm bore dia Steel water tubes, medium grade, ISI marked, galvanised iron, with all fittings, and fixing complited to wall and ceiling or laid in floor including taking uo or down existing water tubing, complete all as specified and directed.

S & F 20mm bore dia Steel water tubes, medium grade, ISI marked, galvanised iron, with all fittings, and fixing complited to wall and ceiling or laid in floor including taking up or down existing water tubing, complete all as specified and directed.

M & L for cutting chases, pinning in making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps cills chases for concealed water tubing exc. 10cm but not exc. 20cm girth, complete all as specified and as directed.

S&F in repair 10 ltrs capacity low level PVC flushing cistern valveless syphonic action type including supply pipe and fixing 30 cm long brackets of M.S. angle of size 25mmx25mmx3mm in PCC (1:2:4) type B-1, block of size (10cmx10cmx10cm) on walls etc, complete all as specified and directed.

S&F in repairs vitrous china wash basin,white, counter type,flat back of size 550 mm x 400 mm with and including CP pillar tap and waste coupling, angle brackets, PVC connection 15 mm size, PVC waste pipe, complete all as specified and directed..

S&F in repairs vitreous china squatting pan ORRISA pattern, size 580x440mm white, with integral foot rest including provn of concrete bedding and connection to trap and 32 mm flushing pipe antisyphonage pipe etc including making good to floor, complete all as specified and directed.

S&F in repairs 15mm bore stop valves, fancy type, chromium plated with long shank and screwed down,high pressure,with crutch or butterfly handle.screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed.

S&F in repairs 15mm bore angular stop cock, fancy type, chromium plated with long shank and screwed down,high pressure,with crutch or butterfly handle.screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed.

S&F in repairs PVC connection 15mm size with PTMT nuts with length 600mm long, complete all as specified and directed.

S&F in repairs 15 mm bore pillar tap, cast copper alloy with capstan heads,chromium plated, screwed down high pressure with and without levelled hot or cold with long screwed shanks and fly nuts screwed for pipe and fixed in repairs, complete all as specified and directed.

S&F in repairs shower rose 125mm, CP, with otr without swivel joints, any size including fixing to steel pipe or union,complete all as specified and directed.

S & F 32 mm PVC waste pipe for wash hand basin, complete all as specified and directed.

S&F in repairs 15mm bore bib taps, chromium plated alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and as directed.

Taking down chowkat with shutter (without taking off shutter from the frame) not exceeding 1.5 sqm each and removing from site (wood or steel), complete all as specified and as directed at site.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.50 sqm each and n. exc. 4.00 sqm each and removing from site, complete all as specified and directed.

S & F factory made solid PVC door frame of size 50mm x 47mm ,ade pit pf 5mm plain colour PVC sheet reinforced with MS square tube as per specification and drawing, complete all as specified and directed.

S & F 30 mm thick (style) Factory made solid panel PVC door shutter consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and directed.

S & F 150 mm aluminium anodised barrel tower bolt of extruded section and fixed,complete all as specified and directed.

S & F 75 mm long butt hinges, medium wight cold rolled mild steel, complete all as specified and directed.

S & F 125 mm aluminium handles cast type anodized, complete all as specified and directed.

S&F Second class hard wood, plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed.

S & F 35 mm thick second class hard wood factory made plain, framed, panelled shutters (two numbers of panels) with lock rail and panel of 9 mm BWP commercials ply or 12 mm veneered particle board on both faces. The size of rails and size as per IS:1003 (Part-I), Kiln seasoned & chemically pressure treated, complete all as specified and directed.

S & F 100 mm long butt hinges, medium wight cold rolled mild steel, complete all as specified and directed.

S & F 250 mm long MS sliding door bolts clamps type stove enameled (ISI marked)black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plates and two on staple plate, complete all as specified and directed.

S & F 125 mm Mild steel pressed handle oval type stove enameled black, complete all as specified and directed.

Mild steel works as in hold fast and similar work conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

M&L for PCC, 1:3:6, type- C0 (using 12.5mm graded crushed stone aggregate) for fixing hold fast, complete all as specified and as directed.

Prepration of new wooden surfaces any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including taking down existing PVC pipe (any size and pattern) with all fitting, complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including taking down existing PVC pipe (any size and pattern) with all fitting, complete all as specified and directed.

S&F for 75mm dia PVC (SWR) bends any radius, complete all as specified and directed.

S&F for 110mm dia PVC (SWR) bends any radius, complete all as specified and directed.

S&F for 75mm bore PVC (SWR) branch pieces, single (single Y) equal or unequal, complete all as specified and directed.

S&F for 110mm bore PVC (SWR) branch pieces, single (single Y) equal or unequal, complete all as specified and directed.

S & F 150 mm dia PTMT grating doom, complete all as specified and directed.

M&L for PCC, 1:2:4, type B-0 (12.50mm graded aggregate) as in roof padding finished even and smooth without using extra cement, complete all as specified and directed.

Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg/sqm including cleaning surfaces , complete all as specified and directed

M&L for APP (atatic polypropline) modified membrane 3mm thick minimum weight not less than 3kg/sqm with 160 gsm/Sqm, non wove polyster mat as center core reinforced laid with 75mm side overlap and 100mm end overlap. The membrane has to be laid with LPG torch and over lap shield and finished neat over roof including a coat of bitumen 85/25 @ 1.2 Kg/Sqm over APP membrane, complete all as specified and directed.

M&L for Cement concrete tiles 25cm x 25cm x 22 mm thick, machine pressed, set jointed and pointed in neat cement slurry and roof over APP membrance laid over and including 15mm thick screed bed in cement mortar 1:6 including dismantling brick tiles or terracing tiles including cleaning the roof surface and filling the cracks (if observed) with silicon , complete all as specified and directed.

Demolition of brick work / stone masonry built in cement mortar or cement lime mortar including all quoins ,arches , pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles, complete all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exceeding 6m built in cement mortar 1:4, complete all as specified and directed.

Mild Steel TMT bars 6 mm to 8 mm dia, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia, complete all as specified and directed.

Preparation of surfaces including brooming down or steel wire brushing scrapping down smoke soot, moulds, moss and efflorescent salts over all decorated plastered or un plastered surfaces of wall including cornices etc and applying one coat of white wash upto four storie building including scafolding arrangement, trestles, ladders etc, complete all as specified and directed.

All as per srl item No 56.00 here in before but applying two coats of white wash.

All as per srl item No 56.00 here in before but applying one coat of white wash on ceiling.

All as per srl item No 56.00 here in before but applying one coat of cement base paint on walls.

All as per srl item No 56.00 here in before but applying two coats of cement base paint on walls.

All as per srl item No 56.00 here in before but applying one coat of oil bound distemper on wall.

All as per srl item No 56.00 here in before but applying two coats of oil bound distemper on wall.

All as per srl item No 56.00 here in before but applying one coat of exterior emulsion paint on plaster surfaces on chajjas/band/facia/balcony etc upto four storied bldg including scafolding arrangement, trestles, ladders etc, complete all as specified and directed Engineer-in-charge.

Complete removal of existing treatment from external surfaces (any number of coats) of walls by steel wire brushing and washing rubbing down and stopping of surface holes and cracks using necessary filling compound of white cement and fine sand in the ratio of 1:3 to obtain smooth regular/even finish using sand paper and applying 2 to 3 mm thick wall putty and one coat of primer and two coats of oil emulsion distemper white or tined on wall upto three storie building including scafolding arrangement, trestles, ladders etc, complete all as specified and directed. Note:- Shade of the OBD shall be approved by GE.

Complete removal of existing treatment from external surfaces of walls by steel wire brushing and washing rubbing down and stopping of surface holes and cracks using necessary filling compound of white cement and fine sand in the ratio of 1:3 to obtain smooth regular/even finish using sand paper and applying 2 to 3 mm thick wall putty and one coat of primer and two coats of exterior emulsion paint with silicon based (first quality) on wall upto three storie building including scafolding arrangement, trestles, ladders etc, complete all as specified and directed. Note:- Shade of the paint shall be approved by GE.

Preparation of old painted wood or wood based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

All as per srl item No 66.00 here in before but applying two coats of synthetic enamel paint

Preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

All as per srl item No 68.00 here in before but applying two coats of synthetic enamel paint

Writing letters or figures (Block, Roman, Italic or Indian) exc. 15cm and n. exc. 30 cm high, complete all as specified and directed

Preparation of previously treated wooden surfaces of any description not other wise described but not exceeding 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

Deduction to be made from BOQ for schedule of credit (Sch 'A' Part - II) Amount of Rs. 8409.00 during AOC Note:- Tenderers shall not quote for this Schedule

Kalsi Engineers and contractors

BHARTI CONSTRUCTIONS

MAMTA ENTERPRISES

M/S Sukhmani Construction Co.