Providing and fixing of angle iron post with barbed wire fencing 3376 rfts and plantation of planting material at Co. 28N Malwan of Social Forestry Range Qazigund

Amount

Fencing Component:- E/W in excavation in foundation trenches or drains (not exceeding 1.5mtrs in width as well as 10 Sq.mtrs on plain) including dressing of sides and ramming of bottoms, upto 1.5 mtrs and lead of 50 mtrs including getting out the excavated soil and disposal of surplus excavated soil as directed. (i) Blocks for Angle Iron Posts (ii) For Enterance Gate

Providing & laying dry stone soling hand packed including ramming, watering and dressing complete. Blocks for Angle Iron Posts & Ent. Gate. For Enterance Gate Deduct 15% voids

Providing & laying cement concrete of specificied grade excl cost of centering and shuttering 1:3:6 (1cement, 3 coarse sand, 6 graded stone aggregate 20mm nominal size ) CRUSHED. All works up to plinth Level. Blocks for Angle Iron Posts and Ent. Gate For Enterance Gate

Centering and shuttering including strutting, propping etc and removal of form work. Block for vertical columns For Enterance Gate

Providing and fixing of Angle Iron Posts made of MS Agnles including cutting, hoisting, fixing in position and applying a priming coat of approved red oxide steel primer including all carriages from approved source up to site of work complete Vertical posts Angle 50x50x6mm

Providing and fixing of MS Gate consisting of 50x50x6mm vertical angle 7.5 feet height and frame ,flats 50x6mm including all necessary fittings, applying a priming coat of approved red oxide steel primer and paint including mechanical carriage.Size 4 'x6'

Providing and fixing of M.S Iron sheet 3 mm of required pattern for Sign Board fixed in Angle Iron posts ,7.5 feet height , (50x50x6 mm) frame and flat iron 50x6 mm including all necessary fittings,including primimg coat including Mechanical Carriage (Sign Board) 3'x5'

Providing & Fixing of Black annealed Barbed Wire dia 2.00 mm having barbs at a distance of 75mm,plus-minus 12mm conforming to relevant ISI specification (IS:278 & 280) product code BABW, including all carriages from approved source up to site of work complete 6 STRAND

Painting with ready mixed synthetic enamel paint of approved brand and manufacture in all shades to give an even shade (two or more coats on new steel work) Vertical Posts,and writing logo with paint on board and Gate painting Vertical posts Angle 50x50x6mm Entrance gate Board

Carriage of sand from 10 kmts by Mechanical Transport from Source up to dumping site of work

Carriage of Bajri from 10 kmts by Mechanical Transport from Source up to dumping site of work

Carriage of sand av 250mts by Head Load from dumping site up to site of work

Carriage of bajri 15mm av 250mts by Head Load from dumping site up to site of work

Cement and steel

Planting Component:- Planting of Saplings with the available of identified site including carriage of plants from different nurseries of Forest/Social Forestry Department by mechnical transport within a maximum lead of 100 kms and headload carriage including loading/unloading upto site of work all operations. (Note plant material shall be supplied departmentally except seed/HC nut) extraction of NR plants will be done by contractor himself. Planting of Conifer plants in pits of size 45x45x45 cms

Planting of broad leaved naked root plants, fruit/fodder in pits of size 45x45x45 cms

Planting of broad leaved naked root plants in trenches of size 90x45x45 cms

Sowing of Grass seed in patches of Size 45x45x15 cms

Sowing of Conifer seed in patches of size 45x45x15 cms

Dibbling of HC Nut seed in patches of sizr 45x45x45 cms

M/S BARKETULLAH HAT

M/S SHABIR AHMAD SHAH