8831 REPAIRS REPLACEMENT OF UNSERVICEABLE LT UG CABLE FEEDER PILLAR BOX MCCB AND ALLIED WORKS AT GHATKOPAR AND VIKHROLI UNDER GE NORTH MUMBAI

Amount

Excavation in trenches, not exc 1.50 m wide and n. exc 1.5 m in depth, for foundation, cable trenches etc. n.exc 10 sq m on plan and getting out soft/loose soil complete all as specified and as directed by Engineer-in-Charge.

Returning, filling in including spreading, levelling, watering and well ramming in layer n. exc 25cm in soil complete all as specified and as directed by Engr-in-Charge.

Removing excavated material to a distance n.exc 50 m and depositing where directed at a level n.exc 1.5 mtr above the starting point complete all as specified and as directed by Engineer-in-Charge

Supplying and spreading in trenches fine dry river sand for cable cushioning and gently punning down in layers complete all as specified and as directed by Engr-in-Charge Note : Thickness of sand cushioning shall be measured after punning and consolidating of sand.

Supplying and laying unreinforced precast concrete cable covers, class LV type, flat of size 250 mm x 150 mm x 40 mm complete all as specified and as directed by Engr-in-Charge. Make : Mehtab Tiles, Indore/M/S Ultra Tiles/NITCO/Topaz Tiles/Navya Tiles, Jodhpur

Supplying, laying, testing and commissioning of UG round cable of size 185 Sqmm, 3.5 core, XLPE insulated, heavy duty, LT, 1100 V grade electric cable with aluminium conductor, served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed, as per IS-7098 part-I, laid in trenches or passing through pipe, making all connections with necessary glands, lugs, bushing etc as required including taking down old unserviceable cable complete all as specified and as directed by Engr-in-Charge. Make: PARAGON/FINOLEX/PLAZA/POLYCAB/KALINGA/VINAY Note : Earthwork, excavation sand cushioning cable cover GI protection pipe shall be measured and paid separately in their respective items

All as per item No.06 above but of 70 sqmm 3.5 core complete all as specified and as directed by Engr-in-Charge.

All as per item No.06 above but of 50 sqmm 3.5 core complete all as specified and as directed by Engr-in-Charge.

All as per item No.06 above but of 35 sqmm 3.5 core complete all as specified and as directed by Engr-in-Charge.

All as per item No.06 above but of 16 sqmm 4 core complete all as specified and as directed by Engr-in-Charge.

All as per item No.06 above but of 10 sqmm 2 core complete all as specified and as directed by Engr-in-Charge.

M & L earthing complete with Galvanised steel earth plate electrode 60 cm x 60 cm x 6.3 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of earth the plate not less than 1.5 metres below normal ground level, connected to and including galvanised earth lead wire 4 mm dia, 7.5 m long, by means of bolts, nuts, check nuts and washers made out of galvanised iron or steel with provision of charcoal & common salt packed upto minimum 150 mm all around the earth plate, and protected by 15 mm bore light grade galvanised iron pipe and connected to control board / panel / equipment complete all as shown in electrical plate No.3 of MES schedule Part I with PCC pit in PCC 1:2:4 type B1 using 20 mm graded stone aggregate, MS angle iron frame of size 50mm x 50mm x 5mm, cast iron cover with locking arrangements, GI 20 mm bore medium grade pipe and CI funnel with wire mesh for watering arrangement including necessary excavaion and earth work in any type of soil/strata & testing complete all as specified and as directed by Engineer-in-Charge.

M & L for earthing complete with Galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of earth the plate not less than 1.5 metres below normal ground level, connected to plate with GI earth strip 32 x 6mm, 7.5 m long from earth point to test point and other end connected to control board / panel / equipment, laid under floors/plinths or fixed on walls or concealed in wall etc by means of bolts, nuts, check nuts and washers made out of galvanised iron or steel with provision of charcoal & common salt packed upto minimum 150 mm all around the earth plate and protected by 32 mm bore light grade galvanised iron pipe complete all as shown in electrical plate No.3 of MES schedule Part I, 2009 with PCC pit in PCC 1:2:4 type B1 using 20 mm graded stone aggregate, MS angle iron frame of size 50mm x 50mm x 5mm, cast iron cover with locking arrangements, GI 20 mm bore medium grade pipe and CI funnel with wire mesh for watering arrangement including necessary excavation and earth work in any type of soil/strata & testing complete all as specified and as directed by Engineer-in-Charge.

Supplying and erecting steel tubular swaged poles complete with MS base plate, finial taper plug, bolts, nuts & screws as per IS-2713 Part -II 1980 complete as specified, type 410 SP-31 (9.0 metres long) including painting with one coat of red oxide primer and two coats of aluminium paint on exposed surfaces & one coat of red oxide primer and two coats of bituminous paint for embedded portion including dismantling of old unserviceable swaged pole by breaking concrete foundations and coping complete all as specified and as directed by Engr-in-Charge. Note :- Earthwork, PCC foundation and coping will be measured and paid separately under respective items.

M & L for providing PCC (1:3:6) type C2 using 40mm graded stone aggregate) in coping & bases of pole, filling and mass concrete including necessary form work for fair finished surfaces complete all as specified and as directed by Engr-in-Charge.

M & L for providing PCC (1:4:8) type D2 using (40mm graded stone aggregate) in foundation of pole, filling and mass concrete including necessary form work for fair finished surfaces complete all as specified and as directed by Engr-in-Charge.

Supply and fix cable junction box IP65 protected outdoor installation of size 200 x 160 x 98mm with 4 way bakelite cable terminals including 03 Nos polymide gland with check nut (M-32- 2 Nos) fixed on poles with flat iron clamps ofsize 25x3mm, nut, bolt, washers etc including applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer and provision of one single pole MCB 6 amps for controlling light etc complete all as specified and as directed by Engr-in-Charge. Make : Sintex GS-JB-2014 or equivalent in National

M&L as in repair for 2 single core wiring for street light fitting complete with and 2 runs of 2.5 sqmm single core PVC insulated and unsheathed copper conductor cable 1100 Volts grade drawn through and including PVC conduit of size 20mm as directed by Engr in charge including accssories and fixed on walls and conncted to common earth dolly ccomplete all as specified and as directed by Engr-in-Charge. Note :-Two runs of 2.5 sqmm cable, one run of PVC conduit will be measured and paid as one unit length. Make; POLYCAB,VINAY,FINOLEX,HAVELLS

Supply, install, test and commision LED street light fitting 1 x 45 watts,pressure die cast aluminium housing, Heat resistance toughened glass with frame, IP 66 protection, better optics for uniform distribution complete with necessary copper wire connection of suitable size and provision of GI tube light grade 40mm bracket of 1.2m bend to shape fixed with suitable clamps, bolts nuts including taking down of old unsv light fitting with bracket complete all as specified and as directed by Engr-in-Charge. Make - Bajaj Cat Part No BRTFG 45W LED or Equivalent in CG/ Philips/Havells/Halonix

S & F GI pipe, light grade, 50mm bore for cable protection on wall, trenches, road crossings etc. with suitable size of GI saddle, wherever necessary complete all as specified and as directed by Engr-in-Charge. Make: TATA/SWASTIK/JINDAL/Bharat Steel tube/ZENITH/Indian Tube Company

M&L for cutting the existing bituminous road to size not exc 45cm wide and depth not less than 45cm for passing of UG cable through GI pipe and making good the disturbed surface filled with excavated material and top 200mm thickness with plain cement concrete 1:3:6, type C1 using 20mm graded aggregate complete all as specified and directed by Engr-in-Charge.

S&F MCCB 4 pole, 160 amps, 415 Volts, 50 Hz, 36 KA breaking capacity, thermal & magnetic adjustable type with extended copper terminals including all connections and testing including taking down of old unserviceable MCCB complete all as specified and as directed by Engr-in-charge.

All as per item No.22 above but 125 amps complete all as specified and as directed by Engr-in-Charge.

All as per item No.22 above but 200 amps complete all as specified and as directed by Engr-in-Charge.

All as per item No.22 above but 250 amps complete all as specified and as directed by Engr-in-Charge.

All as per item No.22 above but 400 amps complete all as specified and as directed by Engr-in-Charge.

All as per item No.22 above but 63 amps breaking capacity 10KA complete all as specified and as directed by Engr-in-Charge.

All as per item No.22 above but 100 amps breaking capacity 25KA complete all as specified and as directed by Engr-in-Charge.

S&F in repair cable jointing kit for 1100 V grade cable for straight through cable joint kit complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 50sqmm to 95 sqmm X 3.5 core complete all as specified and directed by Engr-in-Charge. Make: Densons/ M Seal/ Raychem/ Siemens/ Birla 3M/ Mahindra & Mahindra

All as per item No 29 above but of 16 to 35sqmm x 3.5 core complete all as specified and directed by Engr-in-Charge.

All as per item No 29 above but of 120 to 185sqmm x 3.5 core complete all as specified and directed by Engr-in-Charge.

M&L for repair and replacement of hinges and locking arrangements of existing Outdoor/indoor Panel by means of welding/revetting and painting the panel box where required to match the existing finish complete all as specified and directed by Engr-in-Charge.

M & L for complete removal of existing paint of steel tubular/rail poles length up to 9 mtr including prepration of outer surface and applying two coats of aluminium paint over a coat of red oxide primer and two strip of blue colour paint of size 30 cm width from bottom of pole height 30 cm, including numbering to pole with base paint of yellow colour and Black for numbering which shall not be less than 100 mm in height and 10 mm in width complete all as specified and as directed by Engr-in-Charge.

EVEREST POWER CONTROL ENGINEERS

NANGIA AND CO

DHARMESH ENTERPRISES

shree arihant constrution

NATIONAL ENGINEERING CORPORATION

Shree Ayyappa Engineering