SPECIAL REPAIRS TO BLDG NO P-120 VEER LINE UNDER GE (EAST) MATHURA

Amount

Demolition of cement concrete reinforced n exc 15 cm thickness above ground floor all as specified.

M&L Use & waste of steel Form work to soffits of suspended slabs such as roof slabs floor slab landing and similar work for flat rough finished surface complete all as directed.

M&L for RCC M-25 (Design mix) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified.

M&L for steel reinforcement of TMT bars (FE-500 Grade) 10 mm dia and over cut to length and bent to shape required including cranking bending spirally for hooping for columns hooking end and binding with mild steel wire ( annealed ) not less than 0.9mm dia or securing with clips all as specified and directed.

Demolition of brick work or stone boulder masonary built in cement mortar including all quoins arches pillars etc. but excluding ashlar facing dressed stone work and precast concrete articles

M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified.

M&L for Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified.

Taking down cement or cement lime plaster on brick or stone walls, etc. including racking out joints,hacking for key,scrubbing down with water, etc complete.

M&L for rendering 10 mm thick on ceiling surfaces in cement mortar 1:3 finishing of surface even & smooth without using extra cement complete all as specified.

M&L for rendering 15 mm thick on other than fair faces of brick wall or concrete surface in cement mortar 1:6 finished even & smooth all as specified and directed.

M&L rendering 15mm thick (10mm + 5mm) plaster on fair face of brick work in CM 1:4 and surface finished even and fair by mixing liquid water proofing compound as per manufacturers instructions complete. Note :- Liquid WPC shall be measured & paid seprately under relevant item of this BOQ.

Supply only liquid water proofing compound hydroseal-W+ / Dr Fixit or eqivalent (for plaster hardening, to contol efflorescence & fungal growth) as approved by GE.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

M&L for 25 mm thick cement concrete M-15 grade (Nominal mix) type B1 1:2:4 using 20 mm graded aggregate as in levelling course complete all as specified.

M&L for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified.

M&L Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified.

M&L for Glazed ceramic tiles in vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick backing coat of cement mortar in 1:3 complete all as specified.

M&L for Light shade double charged Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layer in cement mortar 1:4 complete all as specified.

M&L non skid coloured ceramic ENDURA tiles n. exc. 0.11 Sqm 10 mm thick set and jointed in neat cement slurry & pointed with coloured cement to match in floor over & including 15 mm thick screed bed in CM 1:4 complete all as specified.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar.

M&L for Machine cut Machine polished kota stone slab flooring 18-20 mm thick laid over and including 20mm screed bedding in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing with mechanical scrubber complete.

M&L for 20 mm thick Granite slab (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in 20 mm thick cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite. including rounded/half rounded edge and hole for gas pipe in pre-cast slab as well as stone slab in cooking platform complete all as specified.

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified.

M & L for 50 mm thick plain cement concrete M-10 grade (Nominal mix) using 20 mm graded stone aggregate as in plinth protection surfaces finished even and smooth without using extra cement including filling the joints by bitumen and sand mixed in the ratio 1:4 by weight complete all as directed.

M&L for 100 mm thick cement concrete M-7.5 grade (Nominal mix) using 40 mm graded stone aggregate as in sub base complete all as specified.

M&L for 25 mm thick Sand filling under floors including onsolidation for layeing paver block.

M&L for Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade complete all as specified.

M&L for Chequered cement concrete tiles with grey cement and pigment 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors over and including 15 mm thick screed bed in cement mortar 1:4 complete all as specified.

Dismantling ceiling boards any description including frame work complete all as specified and directed.

M&L for providing and fixing inter locking metal grid (snap grid for false ceiling) of size 605 mm x 605 mm in true horizontal level, hot dipped galvanized steel sections (galvanized @ 120 grams/sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24 mm X 38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross “T” of size 24 mm X 28 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm center to center to form a grid of 1200 mm x 600 mm and secondary cross “T” of length 600 mm and size 24 mm X 28 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200 mm X 600 mm panel to form grids of 600 mm X 600 mm and wall angle of size 24 mm X 24 mm X 0.4 mm. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 mm X 37 mm X 25 mm X 1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 mm X 30 mm X 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications and as directed by Engineer-in-charge.

M&L for 4 mm thick Non asbestos fibre cement building boards fixed or laid framework fixed in ceiling complete all as specified.

Taking down Chowkhats or frames with shutter without taking off shutters from the frames not exc. 1.5 sqm each.

Taking down Chowkhats or frames with shutter without taking off shutters from the frames exc. 1.5 sqm but n exc 4Sqm each.

S&F powder coated (powder coating shall not be less than 50 microns of approved colour) Aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

M&L for powder coated (powder coating shall not be less than 50 microns of approved colour) aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.

S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass other parts made of mild steel heavy duty and fixed

S&F 5 mm Sheet glass,ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane complete.

S&F 12 mm thick Prelaminated particle board, interior grade, prelaminated both sides with decorative choice lamination fixed to aluminium frame complete all as specified.

M&L for powder coated (powder coating shall not be less than 50 microns of approved colour) aluminium window shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified

M&L for providing 10mm long tower bolt fixed to window complete all as specified.

M&L for providing powder coated (power coating shall not be less than 50 microns of approved colour) aluminium ventilator, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified.

S&F 4 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete.

S&F 5 mm Sheet glass,ordinary quality and glazing in square n exc 0.5 sq. m in each pane complete.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick single side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet PVC sheet reinforced with M.S. square tube,supplying & fixing in opening as per specification & drawing complete all as specified.

S&F Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified.

S&F 125x60 mm Pressed steel frames made out of 1.25mm steel sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., with one shop coat of red oxide primer complete, as specified, supplied and fixed all as specified and as directed.

S&F 105x60 mm Pressed steel frames made out of 1.25mm steel sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., with one shop coat of red oxide primer complete, as specified, supplied and fixed all as specified and as directed.

M&L for cement concrete M-10 grade (Nominal Mix) using 12.50mm graded aggregate for filling in pressed steel door frames all as directed.

M&L for preparation of new primed surfaces and applying Two coats of synthetic enamel paint on new steel surfaces of any description exceeding 10cm width or girth.

S&F IInd class Hard wood 30mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats.

S&F 30 mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides.

M&L for preparation of new wooden surfaces any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.

Supply and fix Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples completed.

Supply and fix 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded and fixed.

Supply & fix 150 mm long aluminium handles fabricated type anodised all as specified.

Supply & Fix 200 mm long aluminium anodised barrel tower bolts of extruded section and fixed.

Supply & fix 100mm long hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21

S&F in repair 25 mm dia, chromium plated curtain rod with fixing brackets, stops, rollers etc.complete all as specified.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165

M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

Taking up or down 15 mm bore of dia steel tubing and connections, including cleaning for refixing or removal to store.

Taking up or down 20 mm bore of dia steel tubing and connections, including cleaning for refixing or removal to store.

Taking up or down 25 mm bore of dia steel tubing and connections, including cleaning for refixing or removal to store.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth of brick walls complete all as specified.

Supplying & fixing to walls and ceiling 15 mm nominal bore, medium grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 complete all as specified and as directed

Supplying & fixing to walls and ceiling 20 mm nominal bore, medium grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 complete all as specified and as directed

S&F 25 mm bore dia GI tubing medium grade including all fitting fixed to walls and ceiling or laid in floor in repair.

S&F in repair Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including setting the trap and pan in concrete and including 10 ltr capacity PVC valveless syphonic action type low level flushing cistern and 32mm dia PVC Flush pipe complete including jointing to socket of flushing rim all as specified and as directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white including Plastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device fixed,including supply and fix PVC valveless 10 ltr capacity, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets.complete all as specified and directed.

S&F in repair 2 way bib cock with wall flange 15 mm dia including fixing to pipe complete all as specified and as directed.

S&F in repair Health faucet ABS body with 8 mm dia 1.2 m long flexible tube and wall hook including fixing complete all as specified and as directed.

S&F in repair toilet paper holder including fixing to wall complete all as specified and as directed.

S&F in repair 15mm dia bore chromium plated Stop valves/Angle cock cast copper alloy,screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete.

S&F in repair Vitreous China wash basin, white, flat back, size 550x400mm including 15 mm Pillar taps fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure complete all as specified and as directed.

S&F in repair bib cock 15 mm bore chromium plated cast copper alloy with screwed down, screwed for iron pipe or for brass ferrule and fixed.

S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm.

Supply and fix in repair chromium plated Swivel shower of PTMT any colour for fixing with 15mm pipe.

Supply and fix in repair chromium plated Shower arm 15 mm size, 195mm long with bend of 45degree with flange of any colour.

S&F 32 mm dia Low density polyethylene pipes (LDPE) of pressure rating 6 kg/ cm2 laid in trenches

Supply and fix in repair Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats.

S&F sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm

S&F in repair Kitchen Plate Rack fixed to wall with screws complete all as specified.

Dismantling water tanks exc 500 ltrs and n exc 1000 ltrs complete all as specified and as directed.

Supply and fix 1000 litres capacity white colour triple layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete.

S&F in repair 20 mm dia Gun metal, globe or gate valves,with iron wheel head,screwed both ends for iron pipes and fixed.

S&F in repair 25 mm dia Gun metal, globe or gate valves,with iron wheel head,screwed both ends for iron pipes and fixed.

S&F in repair 75 mm dia PVC floor trap plain with grating including jointing with solvent cement complete all as specified.

S&F in repair110 mm dia PVC (SWR) bends any radius with oval access door complete all as specified.

S&F in repair 75 mm dia PVC (SWR) bends any radius complete all as specified.

S&F in repair 110 mm dia PVC(SWR) plain bends any radius complete all as specified and directed.

S&F 75 mm dia PVC (SWR) pipes type 'A' single socketed in any length with rubber ring joints laid in trenches or floors complete.

S&F 75 mm dia PVC (SWR) pipes type 'A' single socketed in any length with rubber ring joints fixed on wall complete.

S&F 110 mm dia PVC (SWR) pipes type 'A' single socketed in any length with rubber ring joints laid in trenches or floors complete.

S&F 110 mm dia PVC (SWR) pipes type 'A' single socketed in any length with rubber ring joints fixed on wall complete.

S&F in repair 110 mm dia PVC (SWR )vent cowl complete all as specified.

S & F 18 mm thick Rajshri solid PVC Kitchen PVC Sheet one side prelam sheet kitchen cabinet shutter of density 600 kg/cum bent at 90 degree and finish all edges at level for making edge lipping/bending or 0.5 mm thick PVC sheet lipping at all four edges using bonding lape etc complete as per direction of Engineer in charge Manufacture's specification. Make :- RAJSHRI PLASTIWOOD LTD/SINTEX INDUSRIES LTD/DURGA PLAST EXTRUSION

S&F 150 mm Brass handles, cast type, polished bright complete all as specified.

S&F 75 mm Aluminium anodised, barrel tower bolts of extruded section and fixed

S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised

S&F 25 mm size Magnetic catches for cupboards including fixing to frame and and connected plate to shutter complete all as specified and directed.

M&l for preparation of old wooden surfaces and applying one coats of synthetic enamel paint complete all as specified.

M&L for providing lock for cupboard with 3 set of keys complete all as specified.

M&L for preparing new plastered surfaces of walls/ceilings and applying two coats of weather proof acrylic exterior paint dark shade (100% Acrylic) over a coat of self primer with spray machine, spray hard to reached area to achieve excellent application using limited manpower including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed. Note :- (i) Weather proof acrylic exterior paint shall be applied machincally by latest machine such as trucare Graco or equivalent having minimum pursue of 3300 PSI.

M&L for prepreation of newly plaster suface of wall and applying two coats of oil bound distemper over a coate of Alkali resistant with spray machine, spray hard to reached area to achieve excellent application using limited manpower over a coat of wall care putty not less than 1mm thick complete all as specified and directed. Note :- (i) Oil bound distemper shall be applied machincally by latest machine such as trucare Graco or equivalent having minimum pressure of 3300 PSI.

M&L for preparation of newly plastered surface of walls and applying three coats of white wash complete all as specified and directed.

M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified.

M&L for preparation of old plastered surfaces of ceiling and applying one coats of white wash complete all as specified.

M&L for preparation of old plastered surface of wall and applying one coat of distemper oil emulsion complete all as specified.

M&L for PCC M-15 grade (Nominal mix) (using 12.5 mm graded stone aggregate) as in coping or roof kerbs on roof chamfered on edge including troating slightly complete all as specified and as directed.

Dismantling brick tiles any size laid bedded and pointed in any mortor.

Demolition of mud in roofs any thickness including plastering and in any position and leaping over roof terrace, removing the demolished material outside MD land and depositing where directed at a level n exc. 1.5 m above starting point, complete all as specified and as directed.

M&L for 50 mm average thick PCC M-15 grade (Nominal mix) (using 12.5 mm grade stone aggregate) in floors/padding finishing the surface even and smooth with out using extra cement.

M&L for preparing cement concrete surface, providing 10 mm thick modified plaster in CM 1:4, cement mixed with polymer in ratio of 1:10 (1 part of polymer and 10 parts of cement), applying primer coat of epoxy primer with resin and hardener with water dilution as per manufactirer instructions, applying two coats of polyurethane liquid membrane each coat not less than 500 micron thick UV stable having SRI value equal or greater than 105 with consumption of 0.61 Kg/ Sqm (each coat), 2 nd coat should be applied once 1 st coat is fully dried. Note : Make of material is Asian paints or equivalent as approved.

Demolition of reinforced concrete (cutting reinforcement as required to facilitate demolation of roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work all as specified.

M&L for 50mm thick sand stone slab set and jointed over supports as in chajjas of ground and first floor's windows in cm 1:4 complete.

M&L for Joist, channel, angle, or tee sections, fixed independently,as in chajja of ground and first floors for support of Sandstone slab complete all as specified.

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as per IS 15965: 2012 in roof covering fixed with self tapping screws complete.

S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as per IS 15965: 2012 in cladding to wall, fixed with self tapping screws as specified.

M&L for obliterating old writing building number with synthetic enamel paint n.exc 0.10 Sqm and match the existing work including preparation of surface all as specified

M&L for Writing letters or figures (Block. Roman, Italic or Indian) n exc. 30 cm high

M&L for providing coloured glazed tiles dark shed 300x200mm fixed in neat cement slurry and painted in coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified.

M&L for providing cement concrete M-10 grade (Nominal mixed) using 20 mm graded stone aggregate as in surface channels and drain complete all as specified.

Disconnecting existing water tanks setting aside (or lowering if required) for repairs, cleaning etc and hoisting if required reconnecting and reflixing in position including cleaning and removing all scale and dirt etc, from tanks and from mouths of circulating pipes etc complete all as specified.

M&L for providing welded wire mesh including fixing to ceiling surfaces with the help of drilling complete all as specified.

M&L for providing plaster 10mm thick in ceiling surfaces in cm 1:4 including dubbing coat complete all as specified.

Taking down aluminum/copper point wiring (light ,fan, socket any type, power, bell etc. ) complete including fixtures & fittings (such as ceiling rose, socket, Pendent, regulator, light fitting etc) and removing the material from site and making good the disturbed surfaces of walls ceiling etc complete all as directed.

Taking down by Submain wiring/ service connection of any type complete all as directed by Engineer-in-Charge.

M & L for Point wiring with 1.5 Sqmm (nominal area) single core PVC insulated unsheathed FRLS cable, multi-stranded, copper conductor, in universal colour code with & including suitable size of rigid non-metallic PVC conduit (not less then 20mm dia med gd)and its all accessories complete concealed in wall / roof incl cutting & chases( making good all to the disturbed surfaces as per existing) and modular flush metal boxes with cover plate including frame for mounting of modular switches, sockets, regulators etc including earth wire of PVC insulated (FRLS) copper conductor multistranded of 1.5 Sqmm size in green colour complete all as specified in current SSR Part-I & II & directed by the Engineer-in-Charge , as described below:-

One light point controlled by one way switch 5 amp complete.

One ceiling fan / Exhaust Fan point controlled by one way switch 5 amp and one regulator complete.

One 3 pin 5 Amps socket point controlled by one Modular switch on same board.

One 3 pin 5 Amps socket point controlled by one switch on independent board.

All as per item No. 127 but for 3 pin / 5 pin 16 Amps sockets outlet with 4 Sqmm PVC insulated & unsheathed FRLS copper conductor cable independent board complete all as specified and as directed .

M&L for Sub Main Wiring with two runs single core 4 Sqmm PVC insulated unsheathed (FRLS) cable with stranded copper conductor drawn in suitable size of rigid non-metallic PVC conduit and its all accessories complete concealed in wall/roof with and including 4 Sqmm copper green colour earth wire all as specified and directed by Engineer-in-Charge. Note:- Two runs of 4 Sqmm single core cable, one run of 4 Sqmm earth wire & One run of PVC conduit shall be measured as one unit length.

M & L for Sub Main Wiring with two runs single core 6 Sqmm PVC insulated unsheathed (FRLS) cable with stranded copper conductor drawn in suitable size of rigid non-metallic PVC conduit and its all accessories complete concealed in wall/roof with and including 6 Sqmm copper green colour earth wire all as specified and directed by Engineer-in-Charge.(02 run 6 Sq mm single core cable, one run of 6 Sq mm earth wire & One run of PVC conduit will measured as one RM). Note:- Two runs of 6 Sqmm single core cable, one run of 6 Sqmm earth wire & One run of PVC conduit shall be measured as one unit length.

Supply and Fixing ceiling rose surface bakelite 65mm x 50mm three terminals complete all as specified.

Supply and Fixing Modular switch 6 Amps single pole one-way, 1 Module complete all as specified.

Supply and Fixing Modular switch 16 Amp single pole one way,2 Module all as specified.

Supply & Fixing Modular fan Regulator electronic step type 120watt , 2 Module complete all as specified.

Supply and fixing fancy Lamp holder, PVC / polycarbonate type with back plate suitable for batten fittings complete all as specified.

Supply and Fixing Modular socket 2-in-1, 5 pins 6 Amps , combined 2 Module complete all as specified.

Supply and Fixing Modular socket 2-in-1,3 and 5 pins 6 /16 Amps, combined 2 Module complete all as specified.

Supply & fixing indoor decorative ultra slim surface /Wall mounted T5 LED batten tube light complete fitting 1x 20 watt LED Tube fitting with polycarbonate channel housing, 140V-270 volts and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed by Enginee-in-Charge. Make:Havells (as per Cat Part No: LUMILINEBS20WLED 865 SPC WH) or equivalent to CG/Bajaj/Philips/ syska

Supply & fixing indoor decorative ultra slim surface /Wall mounted T5 LED batten tube light complete fitting 1x 9 watt LED Tube fitting suitable for mirror light with polycarbonate channel housing, 140V-270 volts and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed by Enginee-in-Charge. Make:Havells (as per Cat Part No: LUMILINEBS9WLED865 SPC W H) or equivalent to CG/Bajaj /Philips / syska

Supply and fix LED 15 W , 5 Star rated lamp suitable for normal holder( Base Cap B22) complete all as specified. Make : Havells or equivalent to Philips / Bajaj / CG

Taking down old unserviceable existing DB / enclousers any size and type / any descriptions as iron sheet scrap including MCB any type / size and making good disturbed surface / wall as per existing complete all as specified and directed

S&F MCB distribution board, SPN 12 Way, Double door, sheet steel, phosphatised, powder painted with Copper bus-bar 200Amp, neutral link, earth bar and din rail , cable ties for cable management, 240 V complete all as specified. Make Havells/Legrand/ABB / C&S. Note : -MCB & MCB /MCCB DBs shall be of same make. DB shall be fixed in flush pattern by cutting the wall and making good disturbed surface as pe directed & rate shall be included in the items.

S&F MCB distribution board, SPN 4 Way, Double door, sheet steel, phosphatised, powder painted with Copper bus-bar 200Amp, neutral link, earth bar and din rail , cable ties for cable management, 240 V complete all as specified. Make Havells/Legrand/ABB / C&S. Note : -MCB & MCB /MCCB DBs shall be of same make. DB shall be fixed in flush pattern by cutting the wall and making good disturbed surface as pe directed & rate shall be included in the items.

Supply & fixing MCB SP 6 - 32 Amps, ' B' series ,bracking cap10KA complete all as specified and directed. Make : Havells- or equivalent of Legrand /L&T/ C&S / ABB

Supply & fix MCB SPN 40 Amps,' C' series , bracking cap10KA, 240V complete all as specified and directed. Make : Havells or equivalent of Legrand/L&T C&S/ ABB.

Supply & fix MCB SPN 63 Amps,' C' series , bracking cap10KA, 240V complete all as specified and directed. Make : Havells or equivalent of Legrand/L&T C&S/ ABB.

Supply and install of 30W LED building security light fitting with lens & driver, IP-65 proction with luminaire efficiecy of greater than 80Lumen/Watt, including all connections complete all as specified. Make of fitting : Havells (as per Cat Part No : ENDURACITYLITEPLAT PLUSSL30WLED757SASYBOPC) or equivalent in Crompton Greaves/ Bajaj/Philips / C&S/ Syska

M&L for building security light bracket made out of 40mm dia light grade GI pipe of 1.2 m length bent to required shape suitable for fixing security light fitting on wall including two Nos clamps complete all as directed by Engr-in-Charge.

Taking down the ceiling fan of any sweep carefully from its installed position, dismantling complete with down rod and replacement of capacitor, Rubber wheel bush and cleaning of all dust, applying grease for bearings, reassembling the fan and blades, painting of fans and down rod with synthetic enamel white paint by spraying including filling cavities with filler, writing MES No. with black paint, and keeping a side safely and hanging / refixing in position after false ceiling work or as directed and connecting up including provision of 3 core twisted flexible copper conductor cable of 0.75 Sqmm from ceiling rose to connector of fan and testing on completion complete all as directed. NOTE:- (a) The spare parts Capacitor, Rubber wheel bush & Nut-bolts shall be measured and paid separately unde relevant item of Sch 'A'. (b) Any damages / brocken of fans during the work, contractor will be responsible for the repair of the same or replaced with new without any extra cost.

Supply and fix exhaust fan 300mm sweep , 1770 m3 / Hours air delivery , 1400 RPM , 70Watt, Mettallic type alongwith louvers complete suitable to work on AC, single phase, 230 Volts , 50 Hz supply and including connecting up with twin core twisted flexible copper conductor cable of suitable size 0.75 Sqmm. Make : Havells -Model Ventil Air DB and equivalent of Bajaj / Crompton greves / Orient

Cutting holes / modified holes for air ducting of exhaust fan in Circule / square shape or as per site requirement into or through concrete walls built in cement mortar of superficial area exc 400 sq.cm but n.exc 0.10 sq.m to a depth of 30cm including making good in cement mortar 1:3 or cementconcrete M-15 grade (Nominal mix) using 20 mm graded stone aggregate as required and rubbish off the premises.

Material and labour for Earthing complete with GI earth plate 600mm x 600mm x 6 mm thick electrode buried directly in ground (earth pit not less then 2.25 metres deep below ground level ) with top edge of the plate not less then 1.5 metres below normal ground level connected to GI wire 4.0 mm as earth lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of MES schedule Part-I and incl 15 mm bore light grade GI protection pipe (upto 7.5 metres beyond outer edge of earth pit) PCC M-10 grade (Nominal Mix) using 40mm graded stone aggregate in CI pit cover with frame, watering arrangement with funnel and wire mesh and 20 mm bore light grade GI watering pipe, common salt and charcoal filling, necessary excavation and earth work complete. Note : GI wire and protection pipe upto 7.5 Mtr length from earth electrode shall be included in quoted rate of item.

M&L for Tubes, light grade, galvanised with all fitting laid in trenches for protection of earthing lead from mechanical injuryor tempering.of size 15mm complete all as specified and directed.

M&L for GI earth lead 4 mm burried in ground / fixed on walls complete with ffixing screws, nut, bolts etc complete all as specified and as directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sq mm 3.5 core, laid in trenches / duct / fixing on walls with clamp / poles or passing through pipe including connecting with suitable lugs,thimble, nuts and bolts to DB/ panel and testing , incl dismantling of old unserviceable cable any size & type complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4 core, laid in trenches / duct / fixing on walls with clamp / poles or passing through pipe including connecting with suitable lugs,thimble, nuts and bolts to DB/ panel and testing , incl dismantling of old unserviceable cable any size & type complete all as specified and directed.

Excavating in trenches not exceeding 1.5 mtr in depth and not exceeding 1.5 mtr wide for laying of cables and getting out in soft/loose soil all as specified and as directed by Engr-In-Charge.

Removal of excavated surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified.

Returning, filling in including spreading, levelling,watering and well ramming excavated soil in layers not exceeding 25 cm thick each , filling back in trenches after cables have been laid and tested complete all as specified.

M&L for sand cushioning to under ground cable in trenches in layers of 8 cm deep before laying the cable and 15 cm deep after laying and stretching the cable complete all as specified and directed by Engr in charge. Note:- Measurement shall be taken after gentling puning.

M&L for laying in trenches un-reinforced precast cement concrete cable cover, class LV type 1, flat, size 250mmx150mmx40mm for cable protection laid adjacent to each other length wise perpendicular to the central axis of cable complete all as specified.

M&L for HDPE Double Wall Corrugated pipe of size 40mm outer dia and 32mm inner dia confirming to IS:14930 Part-II including necessary pipe fittings such as couplers, end caps, bend etc. laid in trenches/ fixed to wall with suitable clamps for cable protection complete all as specified and directed. Make : Gemini/Stiple.

S&F TP&N Vertical Loadline distribution board, 4 Way, Double door, sheet steel, phosphatised, powder painted with Copper bus-bar 200Amp, neutral link, earth bar and din rail ,blanking Plates, cable ties for cable management, 440 V, complete all as specified including fitting with following MCCB & MCBs with connections :-. (Make Havells /Legrand/ABB / C&S) (i) MCCB 100 Amps, 4 Pole, 16 KA - 01 Nos (ii) MCB SP 63 Amps - 02 (iii) MCB TP 63 Amps -02 Nos Note : -MCB & MCB /MCCB DBs shall be of same make. DB shall be fixed in flush pattern by cutting the wall and making good disturbed surface as pe directed & rate shall be included in the items.

Supply and fix modular power socket 16 Amp unit protected with 16 Amp SP MCB including with sheet enclosuer complete all connection as directed. Make : Havells as per Cat Part No DHDMCSN0251016 or equivalent of Legrand /L&T

S&F in replacement ball bearing suitable for ceiling fan complete all as specified and directed.

S&F in replacement capacitor 2.5 MFD suitabel for ceiling fan complete all as specified and directed.

S&F in replacement rubber wheel bush with GI bolt, but washer and split pin complete all as specified and directed.

M/S PREETI CONSTRUCTION

Ms Kamal Kant Agarwal

M/S YATENDRA SINGH

M/S SHRI RAM INFRASTRUCTURE

M/S HAJI BUILDERS

m/s ajeet pratap singh

BHARDWAJ CONSTRUCTIONS

M/s Hoti Lal Contractor