8151/2022-23/E8 PROVN OF TWO STORES FOR CERTAIN UNIT AND SPECIAL REPAIR TO BLDG NO T-58 HQ U FORCE AT KIARI MIL STN UNDER GE 860 EWS

Amount

Surface dressing n.exc 15cm deep in soft/loose soil complete all as specified.

Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m depth and n.exc 10 Sqm on plan and getting out in hard/dense soil complete all as specified and directed.

Returning filling in incl spreading, watering and well ramming in layer n.exc 25 cm in layers complete all as specified.

Removing excavated material to a distance n.exc 50m and depositing where directed at a level n.exc 1.50 m above the starting point complete all as specified.

M & L for Cement concrete type D2 1:4:8 (40 mm graded crushed stone aggregate) in foundations, filling and mass concrete complete all as specified.

M &L Cement Concrete Type-B2 (1:2:4) (20 mm graded crushed stone aggregate) in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) complete all as specified and directed.

M & L for Reinforced cement concrete (design mix) M-25 ( 20 mm graded crushed stone aggregate) in chajjas complete all as specified and directed.

Formwork to sides of surfaces concrete pillars, posts, struts, piers, columns and stanchions rough finished complete all as specified and directed.

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and directed.

Formwork to surfaces concrete chullah hoods, chajjas, troughs and similar items including edges rough finished complete all as specified and directed.

S & F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1998 grade St-240 complete all as specified and directed.

M & L for Pre-cast cement concrete block masonry type C-1 1:3:6 (20 mm greded crushed stone aggregate) with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6, complete all as specified and directed.

M&L for broken stone or boulder hard core of gauge not exc 63 mm deposited spread and levelled in layers not exc.15 cm thick watered and rammed to a true surfaces complete all as specified and directed.

M&L for cement concrete type D-2, 1:4:8 (40 mm graded crushed stone aggregate) 100 mm thick as sub base complete all as specified and directed.

M& L for cement concrete 40mm thick 1:2:4 type B - 1 using 20mm graded crushed stone aggregate as in floor finishing cement concrete surface even and smooth with using extra cement all as specified and directed by Engr-in-Charge

S & F for 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S & F for Factory made shutter 35 mm thick 2nd class hardwood Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated all as specified and directed by Engr-in-charge.

S & F for Factory made shutter 30 mm thick 2nd class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers complete all as specified and directed.

M & L PCC type B-1 1:2:4 (20 mm graded crushed stone aggregate) for fixing hold fast complete all as specified and directed.

S & F MS flat iron of size 25x3 mm as in hold fast conforming to Fe 410-0 or Fe-310-0 complete all as specified and directed.

M & L 15 mm thick cement plaster in cement mortar 1:6 on brick or concrete surface etc. on wall finished even and smooth without using extra cement, all as specified.

M&L rendering in cement mortar 1:3, 05mm thick on fair face on concrete surface and finishing the surface even and smooth (without using extra cement) on ceiling complete all as spd & directed.

Rendering 15 mm thick on fair faces of brick wall or cement concrete surface in cement mortsr 1 :4 finished even smooth without using extra cement, incl mixing of water proofing compound all as specified. (Note - Water Proofing Compound shall be measured and paid for separately

Supply only liquid water proofing compound complete all as specified

M & L plinth protection 75 mm thick in PCC type C1 1:3:6 (using 20 mm graded crushed stone aggregate ) laid in alternate bays (not exc 2 Sqm each) finishing even smooth at top without using extra cement and providing joints throughout the thickness of plinth protectio, filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight all as specified and directed at site.

S & F 3.00 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane, all as specified.

S & F Figured glass, pin head type 3 mm thick, confirming to SI-5437 (1969) and glazing with oil putty in squares n exc 0.5 sq. m in each pane all as specified.

S & F of 100 mm size extruded alluminium alloy with galvanises mild steel hinge pin type C-21 complete all as specified

S & F M S cold rolled butt hinges medium weight 100 mm long (ISI marked) complete all as specified

S & F M S cold rolled butt hinges medium weight 75 mm long (ISI marked) complete all as specified

S & F Aluminium anodised, barrel tower bolts of extruded section with 150 mm long bolt and fixed all as specified

M&L for preparation of new steel surfaces of any description over 10 cm width or girth not otherwise described and treating with two coats of synthetic enamel paints over a coat of red oxide primer complete all as specified

S & F Aluminium anodised, barrel tower bolts of extruded section with 100 mm long bolt and fixed all as specified

S & F Aluminium handles, cast type, anodised 125 mm size complete all as specified

S & F Aluminium handles, cast type, anodised 100 mm size complete all as specified

S & F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, 250 mm long complete all as specified

S & F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, 150 mm long complete all as specified

M & L Preparing new plastered surfaces of wall and applying two coats of cement base paint, all as specified.

M & L Preparing of new plastered surface of wall of any description and applying two coats of distemper oil emulion, all as specified.

M & L Preparation of new plastered surface of ceilings of any description and appying three coats of white washing, all as specified.

Prepration of new wooden or wood based Surfaces of any description, not otherwise descri-bed, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, all as specified.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified with L-type or J-type cranked hook bolts in lieu of screws in roofs, walls etc with grade of zinc coating 275 complete all as directed by Engr-in-Charge.

Dismantling of wall and ceiling boards(Fibre, pulp, insulation, etc) or insulation board/slabs/blankets. any thickness, including cover fillets complete. (Note : Taking down carefully old FTL fitting recessed mounted light fittings/ceiling complete with all accessoeies and making necessary electric conection, complete all as specified and directed by Engr-in-Charge.

Dismantling timber scantlings in fillets, rails, posts, rafters, purlins etc, under 40sqcm in section (unframed work) all as specified and directed.

Taking down Choukhats or frame with Shutters of any discription exc 1.5 Sqm but exc 4 Sqm (without taking off shutters from the frames) complete all as specified and directed by Engr-in-charge.

Taking down of door shutter of any description exc 1 sqm but not exc 2 sqm each and refixing in same opening duly rectify the issue (decay, fixing of hinges, cheasling etc) complete all as specified and directed by Engr-in-Charge

Demolition of cement concrete in ground floor and paving not exc 15cm thickness above ground level complete all as specified

M&L for 4 mm thick Veneered decorative plywood grade 1 (with BWR resin) with decorative face veneers on one faces, fixed with nails to timber frame work in wall complete all as specified

M&L for 4 mm thick Veneered decorative plywood grade 1 (with BWR resin) with decorative face veneers on one faces, fixed with nails to timber frame work in ceiling complete all as specified

S&F second class softwood plain fillets, square, rectangular or triangular in section clean sawn secured with nails sectional area exc 13 and not exc 25 Sqcm complete all as specified and directed.

S&F for 2nd class Softwood N exc 6 sqcm moulding as in cornices, picture rail complete all as specified

S&F for 2nd class Softwood timber plain fillets square,rectangular or triangular in section clean swan scured with nails n.exc 3 Sqcm complete all as specified.

M&L 25 mm thick cement concrete type B-1 1:2:4 (12.5 mm graded crushed stone aggregate )in sub base of floors complete all as specified.

M & L for coloured non-skid ceramic tiles 400x400x7 mm thick in flooring set & jointed in neat cement slurry and pointed in cloured cement to match the shade of tiles over and including 15 mm thick cement mortar screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed by Engr-in-charge.

Material and labour for one coat of synthetic enamel paint on old steel surfaces of any description, not otherwise described over 10cm width or girth after preparation complete all as specified and directed by Engr in Charge.

S & F Aluminium handles, cast type, anodised 150 mm size complete all as specified

S & F 3.00 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane, including hacking out of old broken glass all as specified.

M&L one coats of synthetic enamel paint after preparation of the old wooden surface over 10cm width or girth all as specified.

S & F in repair for 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides all as specified.

Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete with fittings and fixtures such as switches, ceiling roses, pendants, regulators, socket, lamp holders brackets, bulk head fittings, tube light fittings etc complete and removing all retrieved materials to MES stores for segregation of serviceable /Unserviceable fitting&fixture and also making good disturbed surfaces of wall, floors etc complete all asspecified and as directed by the Engineer-in-Charge.

M&L point wiring complete for one light / bell / fan point controlled by one no, 1-way, 5 Amps switch. with single core FRLS PVC insulated, unsheathed, multi stranded copper conductor cables 1.5 Sqmm 1100 volts grade, with and incl 1.5 Sqmm FRLS PVC insulated, unsheathed, multi stranded copper conductor cables as continuous earth wire connected to metallic bodies of luminaries / fans etc at one end and to common earth dolly at other end, complete wiring drawn through & PVC casing and capping of 25 mm and above (as per conductor run ) medium grade, ISI marked, incl all accessories & fittings / junction boxes / inspection covers etc, with and incl 50mm deep box made out of 2nd class hard wood of required size and shape , covered with & incl 3 mm thick bakelite, laminated hylem sheet suitable for fixing of piano type switches / sockets etc, complete all as specified and directed for the following :- (Note : The cost of box with 3 mm thick bakelite, laminated hylem sheet top cover is deemed to be included in quoted rate.)

All as per Srl item no. 61 here-in-before but one 3 Pin socket outlet, 5 Amp on independent board

All as per Srl item no. 61 here-in-before but one 3 Pin socket outlet, 5 Amp on same board

All as per serial item No 61 here-in-before, but for one socket outlet 15 Amps on independent board with 2.5 Sqmm FRLS PVC copper conductor (Multi-stranded) insulated and unsheathed electric cable 1100 volts (ISI Marked) including FRLS PVC insulated and unsheathed electric cable 1100 volts 2.5 Sqmm copper stranded conductor as continuous earth wire connected to common dolly.

S&F switch piano flush button single pole one way 5 Amps complete all as specified and directed by Engineer-in-Charge

S&F in replacement of socket, two-in-one, 5 pin, 5 Amp, universal type, 230 volts, complete all as specified and directed by Engineer-in-Charge

Supply and fixing switch socket combination multi purpose 2 in 1, 5 Amp flush type complete all as specified and as directed by Engr-in-charge.

Supply and fixing switch socket combination multi purpose 2 in 1, 3 pin 5 Amp and 15 Amp, flush type complete all as specified and as directed by Engr-in-charge.

Supply and fixing angular lamp holder, PVC/Polycaronate type with back plate suitable for 9/12 watt LED bulb for batten fittings complete all as specified and directed by the Engineer-in-Charge.

S&F LED bulb 12 Watt complete all as specified and directed by Engineer-in-Charge

S&F of Ceiling rose, two to three terminals, bakelite body, 230 volts, complete all as specified and directed.

Supply and fixing LED lights with complete fitting 1x 20/22W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified.

S&F in replacement of Distribution Board, double Door, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, SPN 08 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof, suitable for incorporation of MCB’s and isolators etc and making all necessary connections, duly flush of wall surface, complete all as specified and directed.

S&F MCB single pole and neutral 32 to 40 Amps, 240 Volt, C curve 10 KA complete all as specified and directed by Engineer-in-Charge

S&F MCB single pole 5 to 30 Amps, 240 Volt, C curve 10 KA complete all as specified and directed by Engineer-in-Charge

S & F new energy saving bulk head fitting 12 watt made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP 66 protection and impact resistance of IK 07 as required to be mounting bracket in wall/floor to suit the opening of the fitting with FI clamp, nut, bolt and washer of suitable size including making connection complete all as specified and directed by Engineer-in-Charge

Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metres below normal ground level, connecting to the Galvanized iron earth wire 4.0 mm dia by means of bolts, nuts , check nuts and washers of galvanized iron and steel earth wire protected by provision of GI light grade pipe 15 mm bore including provision of concrete pit made from PCC ( 1:2:4) type B-1 (using 20 mm graded stone aggregate) with 40mm thick cover of RCC 1:2:4 reinforced with XPM (Weight not less than 4 Kg/Sqm) and frame of angle iron 40 x 40 x 6 mm and handle of 6 mm dia MS bar made to shape, GI light grade 20 mm bore pipe for watering perforated at bottom, 1.50 metre long placed on top edge of earth plate, common salt & charcoal filling, with fixing arrangement , funnel, wire mesh and earth work in hard/dense soil , returning filling in and removal of surplus soil to a distance not exceeding 50 metres, all as per electrical plate No 3 of SSR 2009 Part-I and connecting to MCBDB’s earth test point all as specified or indicated including testing on completion .

Supply and laying XLPE insulated armoured heavy duty electric cable with aluminium conductor (Stranded) 1100V grade cross-sectional area 10 Sqmm 2 core laid in trenches or passing through pipe or fixed on pole etc complete all as specified and directed by Engr-in-Charge

M&L for un-reinforced pre-cast concrete cable covers, class LV type-1, flat size 250mm x 150mm x 40 mm thick complete all as specified and directed by Engineer-in-Charge

M&L for sand cushioning to under ground electric cable complete all as specified and directed by Engineer-in-Charge

Taking out old LT under ground cable from trenches / floor / road / wall / pipe / pole of any size and description incl joint, complete all as specified and directed by Engr-in-Charge.

Taking out old unserviceable/serviceable un-reinforced concrete PCC cable covers from excavated trench all as directed by the Engineer-in-Charge. Note:- Serviceable un-reinforced concrete PCC cable cover kept in safe custody for reuse at site and unserviceable un-reinforced concrete PCC cable cover through in low lying area.

Laying only old reinforced PCC cable cover of any size as retrieved from serial item No- 82 here-in -before, complete all as directed by Engineer-in-Charge.

N K BUILDERS

M/s Koul & Sons