Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹45.7 LAccepted-AOC | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹47.5 L+₹2,712 (0.06%)Rejected-Finance D 662 WZ 1598 R 1 NANGAL RAYA NEW DELHI 110046 | NEW DELHI | NEW DELHI | DELHI | 110046 | L2 | Rejected-Finance Being other than lowest | |
| 3 | L3₹50.0 L+₹2.5 L (5.18%)Rejected-Finance H NO 154 VILLAGE SHIKARPUR PO NAJAFGARH NEW DELHI 110043 | WEST | DELHI | 110043 | L3 | Rejected-Finance Being other than lowest | |
| 4 | L4₹64.1 L+₹16.6 L (34.9%)Rejected-Finance | L4 | Rejected-Finance Being other than lowest |
Tender Value
₹50.0 L
EMD Value
₹99,920
Closing Date
5 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (EAST) DELHI CANTT-10
GE (EAST) DELHI CANTT-10
BARRICADING AND OTHER MAINT WORKS FOR PM RALLY, INCLUDING MAINT OF MARRIED/ OTM ACCN IN THE AOR OF AGE BR-III UNDER GE (EAST) DELHI CANTT-10
2022_MES_561194_1
GE/DE-71/2022-23
Open Tender
Civil Works
Item Rate
90 days
GE (EAST) DELHI CANTT-10
Class D Cat a (i)
8 documents required · 8 mandatory
₹500
Yes
GE (EAST) DELHI CANTT-10
₹99,920
Yes
23 Dec 2022
3 Nov 2022
7 Dec 2022
3 Nov 2022
5 Dec 2022
17 Nov 2022
Amount
Excavation in post holes (or similar holes) in soft/loose soil each not exceeding 0.5 cum getting out, returning, filling in ramming earth or broken rubble in layers not exceeding 25 cm, watering and removing of surplus soil to a distance not exc 50m and making good surfaces, complete all as specified and as directed.
Transporting and fixing only of wooden post and placing in position and fixing of wooden post including treatment of wooden post below gound level with hot mixture of tar and creosote in proportion of 20kg of coal tar to 20kg of cresote and paintng one coat of synthetic enamel paint on posts on portion above ground level. (size of post is 10cmx10cmx1.65mtrs) complete all as specified and as directed. Note :- Excavation and earth work shall be measured measured separately in item No 1 above (Posts shall be issued to free for fixing) and shall be return to MES store after completion of work.
Transporting and fixing only GI Tubing 40 mm dia, placing and fixing in position with mild steel clamps & bolts to wooden posts, complete all as specified and as directed. (NOTE : GI Pipes, clamps and bolts shall be issued as free for fixing only and shall be return to MES store after completion of work.
Transporting and taking out/down after use, GI tubing 40 mm dia including mild steel clamps, bolts nuts etc., and removing from site and depositing to respective MES store yard and stacking properly, complete all as specified and as directed.
Transporting and taking out after use, wooden post of any description embeded in ground and making good embeded portion of disturbed ground and removing the wooden post to respective MES store yard and stacking properly, complete all as specified and as directed. Note : (Wooden posts shall be obtained from item No 2 here in before.)
Transportation and fixing only welded mesh to MS angel iron frame size 300cmx165cm height, placing and fixing in position including one coat of aluminium paint, complete all as specified and as directed. (NOTE : 1. Welded mesh with angle iron frame shall be issued as free for fixing only and shall be return to MES store after completion of work.)
Transporting and taking out after use, welded mesh frame including embeded portion and making good disturbed ground and removing the same to MES store Yard and stacking properly, complete all as specified and as directed.
Transporting and fixing only of GI pipe frame of 40mm dia and placing in position and fixing complete including one coat of aluminium paint size of frame 2.95 to 3.05m long and 1.5m high, complete all as specified and as directed. (NOTE : GI frame shall be issued as free for fixing only and shall be return to MES store after completion of work.
All as per description of Srl item No. 8 here-in-before but size of frame 2.85 m long and 1.5m high, complete all as specified and as directed. (NOTE : GI frame shall be issued as free for fixing only and shall be return to MES store after completion of work.
All as per description of Srl item No. 08 here-in-before but size of frame 1.5 m long and 1.5m high, complete all as specified and as directed. (NOTE : GI frame shall be issued as free for fixing only and shall be return to MES store after completion of work.
Taking out after use, embeded posts of GI tubing including making goood disturbed ground and removing the welded frame to MES store yard with transportation and stacking properly, complete all as specified and as directed.
Transportation and fixing only steel wire fabric frame of size (1.5m x0.9m), placing and fixing in position of steel wire fabric and frame with nuts and bolts to the MS pipe posts and paintig one coat of aluminium paint, complete all as specified and as directed. (NOTE : Steel wire fabric frame shall be issued as free for fixing only and shall be return to MES store after completion of work.
Dismantling after use and Transporting of steel wire fabric from MS pipe stand and removing to MES store Yard and stacking properly, complete all as specified and as directed.
Supply and fixing in replacement 50mm dia 6.10mtr long, 3-4mm thick galvanised iron tubing medium grade with fitting used for flag pole including preparation and application of two coats of aluminum painting over one coat of red oxide primer complete all as specified and as directed. (Note: Purchase voucher of GI Pipe shall be submitted by the contractor duly defaced by Engr-in-Charge while submitting claim for advance and final bill.
M&L Welding existing old GI/MS pipes /angle iron frame (length of weld joint exc 5mm but not exc 15 mm joint for barricadding including preparation and finishing the same by painting two coats of synthetic enamel paint complete all as specified and as directed.
Transportation and fixing Welded mesh of mild steel in angle iron frame of size 3000mm length x 1650mm height including placing and fixing in position after applying two coats of aluminium paint over a coat of red oxide, complete all as specified and as directed. (NOTE : Welded mesh of mild steel shall be issued as free for fixing only and shall be return to MES store after completion of work.
Dismantling after use and Transporting of welded mesh of mild steel in angle iron frame and removing to MES store Yard and stacking properly, complete all as specified and as directed.
M & L for preparation of Old external wall and ceiling surface by complete removal of existing treatment of walls for by mechanised sander of Asian paints or its equivalent as per List of makes viz Xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible applying 2-3mm thick wall care putty (JK/Birla) in two or more coats and applying two coats of exterior acrylic emulsion paint of any tint over a coat of primer as per manufactures instr at any height complete all as directed. (Make of exterior emulsion paint BERGER (WEATHER COAT ALL GUARD), ASIAN (APEX ULTIMA), NEROLAC (EXCEL TOTAL)).
M & L for Preparation of Old external wall and ceiling surface by complete removal of existing treatment of walls for by mechanised sander of Asian paints or its equivalent as per List of makes viz Xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible and applying two coats of weather proofing exterior acrylic emulsion paint premium quality over 1-2mm thick wall care putty (JK or Birla) on wall surfaces complete all as specified and as directed. (Make of exterior emulsion paint BERGER (WEATHER COAT ALL GUARD), ASIAN (APEX ULTIMA), NEROLAC (EXCEL TOTAL)).
M & L for preparation of plastered or unplastered old decorated surfaces of walls including brooming down or scraping down with steel wire brushes of smoke spots , moulds ,moss efflocerent salts and treading oil and greasy spots, filling the cracks, holes with POP/Putty and applying One coat of Oil bound distemper including 1-2mm thick wall care putty JK or Birla complete all as specified and directed.
M&L Preparation of old painted wooden or wood based surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed.
M&L Preparation of old painted steel or iron surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed.
M & L for preparation of black top surfaces of road by cleaning with air blower and applying 2.00mm thick road marking strips, dahses, arrows letters etc upto 10cm wide or more (retro-reflective) of white or golden yellow shade/colour using hot thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and driven by experienced operator on road surface including cleaning all loose dirt, seals, oil greases and foreign materials etc complete all as directed by Engr-in-Charge and as per applicators specifications-Asian Paints or equivalent.
M & L for one coat of synthetic enamel paint, any tint on old painted plastered surfaces or brick, stone, concrete, asbestos cement or plastered surface exceeding 10cm width or girth including preparation of old painted surfaces and filling of holes with putty and 1-2mm thick wall care putty, complete all as specified and as directed.
Taking down cement or cement lime plaster of any description on brick or stone walls and concrete surface etc including raking out joints hacking for key scrubbing down with water etc complete all as specified.
M & L for rendering 15mm thick on fair faces of brick work or concrete surfaces (Cement plaster 1:4) finished even and smooth without using extra cement complete all as specified and as directed.
M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM1:6 finished even and smooth without using extra cement complete all as specified and as directed.
M & L for 15mm thick polymer modified readymix cement based plaster Make : Ultratech (Brand name Readiplast) complying to IS-1661-1972, IS-2250-1965, IS-2402-1963) or equivalent as approved by GE, applied in ratio 1:4 as per manufacturer's instructions, on fair faces of brick masonry or concrete surfaces finished even and smooth, including taking down of existing cement or cmenet lime plaster of any thickness and any description on brick or stone walls including raking out joints, hacking for key and scrubbing down woith water, complete all as specified and as directed.
M & L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern (groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove) complete including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified.
M & L for Preparation of newly plastered surfaces of walls and applying two coats of exterior emulsion weather proof paint premium quality, over a coat of wall primer and 1-2mm thick wall care putty (JK of Birla) complete all as specified and as directed. (Make of exterior emulsion paint BERGER (WEATHER COAT ALL GUARD), ASIAN (APEX ULTIMA), NEROLAC (EXCEL TOTAL)).
M & L for Preparation of newly plastered surfaces of walls and applying two coats of Oil Bound Distemper, over a coat of wall primer and 2mm thick wall care putty (JK of Birla) complete all as specified and as directed.
M & L for preparation of old plastered or unplastered old decorated surfaces of walls including brooming down or scraping down with steel wire brushes of smoke spots , moulds ,moss efflocerent salts and treading oil and greasy spots, filling the cracks, holes with POP/Putty and applying One coat of Cement Based Paint complete all as specified and directed.
M & L for preparation of plastered or unplastered old decorated surfaces of walls including brooming down or scraping down with steel wire brushes of smoke spots , moulds ,moss efflocerent salts and treading oil and greasy spots, filling the cracks, holes with POP/Putty and applying One coat of exterior acrylic emulsion paint premium quality complete all as directed (Make of exterior emulsion paint BERGER (WEATHER COAT ALL GUARD), ASIAN (APEX ULTIMA), NEROLAC (EXCEL TOTAL)).
S & F for prepainted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of plain or corrugated AC sheeting any gauge thickness as in roof covering or view cutter on wall or in any position, complete all as specified and as directed.
S & F painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of existing AC sheet corrugated or semi corrugated as in roof coverings complete all as specified and as directed.
S & F 2mm thick fibre glass reinforced translucent Plain/corrugated sheeting with additional reinforcement of chicken mess with two corrugation side lap fixed with 'L' or 'J' type or crancked hook bolts including dismantling of of existing sheeting of any type complete all as specified and directed.
M & L 20mm thick granite of any type work table rubbed and polished as in steps, jambs, pillars, window cills, cooking platforms and like in over 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab , notching and moulding including demolition of existing granite complete all as specified and as directed .
M & L for Non-Skid coloured ceramic tiles 7-8mm thick (Square/ rectangular) area of each tiles exceeding 0.11 sqm but n.exc 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15mm thick screed bed in CM 1:6, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), complete all as specified and as directed.
M & L for glazed coloured ceramic tiles in vertical surface 300x600x7 mm thick (with pattern and border work as required at site) set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 10mm thick rendering in CM 1:4 including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), complete all as specified and as directed.
M & L for coloured vetrified tiles of size 600 x 600 x 10mm thick as in floor over and incl 15mm thick screed bed 1:6 in cement mortar, set and jointed in white cement with pigment to match including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), complete all as specified and as directed.
M & L for Vitrified coloured ceramic tiles light shade 10mm thick, square/rectangular(with pattern and boarder work as required at site), area of tiles exceeding 0.42Sqm and not exceeding 1.50Sqm each tiles as in flooring over and incl 15mm thick screed bed in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match over or filling spacers as per requirement at site including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), complete all as specified and as directed.
S & F designer board false ceiling of size 600x600x4mm thick white prelaminated sett embosed reinforced tiles of approved texture at all height laid on Hot dipped Galvanised iron imposed grid with 24mm wide T-section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33mm thick GS sheet and of size 24x32x3000mm and spaced at 1200mm centers securely fixed to the structural soffits by approved hangers at 1200mm maximum centers. Hangers of GI wire 4mm dia to be fixed by approved rawl plug, level and justers and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall. Flush fitting of 1200mm long cross tee (with double stitching) to be interlocked between main runners at 600mm center to form 1200x600mm modules cross tee longer than 600mm to be supported independently. 600x600mm modules to be formed by fitting 600mm long cross Tee centrally between the 1200mm cross tee. Tee, Perimeter wall angle shall be of 0.45mm thick GS sheet of size 19x19mm and 300mm long of white colour all as per manufacture instruction including taking down the existing false ceiling of any type with frame work complete all as specified and directed.
Providing and applying the plaster with single complaint ready to use repair mortar (SMART CARE REPAIR MORTAR) capable of applying 15mm average thickness in single layer and finishing with trowel with a bond coat : SBR polymer (@ 10% of cement weight) modified cementious bond coat @ 2.2 Kg Cement/Sqm of surface area mixed with specified portion of AP SMARTCARE repair polymer incl taking down existing roof treatment of any type and also taking down cement plaster on concrete surfaces, incl raking out joints, hacking for key, scrubbing down with water etc. to receive further treatment complete all as specified and as directed. Make :- Asian Paints or equivalent in Sikka, Forsroc and Berger. Note: The application shall be executed on any type of surface and on Horizontal/Vertical areas.
Providing and applying Smartcare Dampproof, a fibre reinforced elastomeric liquid water proofing membrane formulated with reinforcing acrylic fibers having Sun Reflectivity Index (SRI) of 105 on horizontal/vertical surfaces of roof/wall/chajjas in multiple coats @2.0 litre/sqm. Primary coat is self-priming coat of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1, damp proof : water) and other coats to be applied undiluted. The coating needs to be reinforced with 40 GSM geotextile, to sandwiched between 2nd & 3rd coat of coating. The application shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes complete in all respect as per the direction of Engineer-in-Charge. Make: SmartCare Damp Proof of Asian Paints or equivalent in Berger and Nerolac. Notes: (1) The work shall be executed through authorised applicator of manufacturer only. (2) Authrised Applicator shall be approved by GE before starting of work. (3) The purchase voucher shall be produced to the Engineer-in-Charge for his verification of material. Engineer-in-Charge shall deface the original purchase vouchers.(4) Guarantee: The contractor shall furnish a written guarantee for the effectiveness of the water proofing treatment for a period of Eight years in favour of the GE. A sum equivalent to 2.5% (Two point Five Percent) of the cost of water proofing treatment shall be retained by the Govt from the contractor’s dues as security deposit. The contractor may, however, furnish a fixed deposit receipt in lieu from a Schedule bank pledged in favour of Garrison Engineer.
M & L for preparation of old painted corrugated or plain steel or iron surfaces (Roof top upto a height of 15 mtrs) of any description over 10cm width or girth and applying two coats of synthetic enamel paint (Green/Blue/Red or white colour as per requirement at site and as directed by Engr-in-Charge) complete all as specified and as directed. Note : Cost of all requisite scaffolding, ladders and safety gear required for execution of work shall be deemed to be included in the quoted rates of above item)
Preparation existing black top surfaces by using mechanical air blower of adequate capacity as directed to remove all loose dirt etc complete all as specified and as directed. Note : Cost of all requisite scaffolding, ladders and safety gear required for execution of work shall be deemed to be included in the quoted rates of above item)
M&L for applying evenly one coat of water based bituminous road marking thinable paint of black colour on prepared black top surfaces. Rate of application shall not beless than 1 Ltr/ 20Sqm complete all as specified and as directed by Engr-in-Charge and GE. Note : Cost of all requisite scaffolding, ladders and safety gear required for execution of work shall be deemed to be included in the quoted rates of above item)
SHIVA ENTERPRISES
M/s Shubh Enterprises
aggarwal engineers contractors
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .