Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.1 LAccepted-AOC GROUND FLOOR THAKUR COMPLEX BASANTPUR | BASANTPUR | SHIMLA | HIMACHAL PRADESH | 171018 | L1 | Accepted-AOC L1 | |
| 2 | L2₹24.8 L+₹68,603 (2.85%)Rejected-AOC HOUSE NO 45 NEAR MONAL PUBLIC SCHOOL SANJAULI SHIMLA 171006 | SHIMLA | HIMACHAL PRADESH | 171006 | L2 | Rejected-AOC L2 | |
| 3 | L3₹25.0 L+₹89,935 (3.73%)Rejected-AOC VILLAGE DINAK P O KANAID TEHSIL SUNDERNAGAR | BILASPUR | HIMACHAL PRADESH | 174001 | L3 | Rejected-AOC L3 | |
| 4 | L4₹26.5 L+₹2.4 L (9.91%)Rejected-AOC | L4 | Rejected-AOC L4 | |
| 5 | L5₹26.5 L+₹2.4 L (10.1%)Rejected-AOC | L5 | Rejected-AOC L5 |
Tender Value
₹29.5 L
EMD Value
₹59,000
Closing Date
20 Sept 2022, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
XEN Electrical Division No. 1 Shimla
The Executive Engineer Electrical Division No-1 HPPWD Shimla-9
CO Govt. Degree college complex Commerce Block at Solan Distt.Solan H.P. SH Providing E.I. there in
2022_PWD_64949_1
Electrical Div.No.I PWD Shimla 3683-88 dt.05.09.
Open Tender
Electrical Works
Item Rate
365 days
SHIMLA
Please refer Tender documents.
7 documents required · 7 mandatory
₹1,500
E.E.Electrical Division No-I Shimla-9
₹59,000
18 Jun 2023
14 Sept 2022
21 Sept 2022
14 Sept 2022
20 Sept 2022
14 Sept 2022
Amount
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. asrequired. Group-C
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.
2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
2 X 4 sq. mm + 1 X 4 sq. mm earth wire
2 X 10 sq. mm + 1 X 6 sq. mm earth wire
4 X 4 sq. mm + 2 X 4 sq. mm earth wire
4 X 10 sq. mm + 2 X 6 sq. mm earth wire
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.
3x1.5 Sq. mm.
3x4.0 Sq. mm.
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
25 mm. dia
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.
Supplying and fixing metal box for 8 module along with modular base and cover plate on surface/recess including providing and fixing 3Nos of S.P. 5 pin 5/6 amps modular socket outlet and one No 5/6 amps,modular type switch, connections, painting etc. as required.(Computer Point)
Supplying and fixing of 1 module UTP cat 6E information outlets toolless system for data and voice complete with connections, testing and commissioning etc. as required.
Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.1 run of cable
Providing and installation of following type of surface mounting square/round type LED panel Light with aluminium die cast housing in white finish with anti glare polycarbonate diffuser and seprated energy efficient constant current, non-integral, electronic driver; suitable for input voltage: AC 220-240 V,50/60Hz, complete with all accessories, connections, testing etc. as required of Approved Make
Square LED Panel Light 12W Surface
Square LED Panel Light 15W Surface
Square LED Panel Light 18W Surface
Providing and installation of following type of LED batten with aluminium housing, anti glare polycarbonate diffuser and energy efficient constant current, integral electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, including mounting clamps, connections, testing etc. as required: of Approved Make
LED Batten Light 20W
Supplying and fixing of following LED bulk head fitting with all accessories including making connections, testing etc. as required. Make Wipro,C&S, Philips, Panasonic or any other approved by Engineer-in-Charge.
LED bulk head 10W
Providing, Installation, testing and commissioning of ceiling fan with regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required: of Approved Make
Ceiling Fan 1200 mm sweep
Ceiling Fan 1400 mm sweep
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
Providing and installation exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required of Approved Make
Exhaust Fan, Heavy duty, 300 mm sweep
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
Double door-12 Way
Double door-8 way
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
Single pole
Supplying and fixing Higher Rating (80 to 125A) 240/415 volts,10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.MCB DP 50/63 A 'C' curve.Make Hager,Schenider, Havells,L&T,ABB or as approved by Engineer-in-Charge.
Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 Amp
Supplying & fixing, testing, commisioning of storage type water cooler with reciprocating compressor of ISI marked, environment friendly new age refigerant of rugged stainless steel/ galvanized steel body. Total storage capacity 80 Lt. and cooling capacity 40 Lt/Hr with 2 Nos of faucets and all accessories etc. . Make Usha, Blue Star, Carrier or its equivalent make.
Supplying and erection of following depth sheet metal light sub panel cubical (pedestal)of suitable dimension thick m.s angle iron frame, covered with 1.6mm thick m.s. sheet duly welded an five side and front side hinged complete with locking arrangment with sufficient no vertical and horizontal intermediate switch gear supporting members each of M.S. of suitable length duly welded. The cubical pedestal have cable entry box at one or two side and 4 nos. legs of M.S. angle iron each etc. long i/c power coated painting and bonding to the existing earth etc. The cubical pedestal consists of following switchgear units (S/F 1 No. MCCB 125 Amp F/Pole Main control,3 No. MCCB 63 Amp F/Pole for floor feeders, copper bus bar 125 Amp, VAF Meter Digital, CTs and indicators complete in all respects)
Supplying and erection of Light sub- panel 63 Amp. cubical panel enclosure DMC/SMC Insulator supports control wiring with thimble power wiring with thimble terminal block & short links door locks & hings rubber gasket heat shrinkable sleeves colour coded engraved name plate indoor type wall mounted complete with locking arrangement to house 63 Amp. MCCB with 100 Amp Copper busbar Phase indication lamps RYB. The cubical panel shall have cable entry at two sides complete in all respects including the cost of switchgears.
Providing & Laying of one number aluminium conductor, PVC insulated and PVC sheathed armoured/ XLPE power cable, 1.1 KV grade of following sizes on wall surface as required.Make KEI, Havells,Polycab or as approved by Engineer-in-Charge.
Armoured cable 25 sq. mm (four core)
Armoured cable 70 sq. mm (3.5 core)
Supplying and fixing of LED street light 45 W versatile pressure die-cast alluminium housing with UV stablized PC IP diffuser for better light distribution alongwith electronic driver,complete with all accessories including making connections, testing etc. as required. Make:- C&S, Wipro, Philips, Panasonic, or any other approved by Engineer-in-Charge.
Supplying and erection of street light bracket made of G.I. pipe 'A' class of suitable length and dia, the pipe bended to give an angle of 100 to 110 degree fitted with bolt & nuts at the top of existing pole or wall including painting the pipe with two coats of approved paint over priming coat complete in all respects as required:- 32 mm dia. G.I. pipe, heavy class
Earthing with copper earth plate 600 mm X 600 mm X 3 mmthick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required.
Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)
Providing and fixing of lightning conductor finial, made of copper bonded rod (14.2x1000) mm with base plate including holes etc. complete as required.
SITC of 1.5 Ton Hot and cold split type AC ( 3 star rating) copper condenser including indoor/ outdoor system and making connections testing etc. complete in all respects. Make:- Voltas , Blue Star , LG, O General, Daikin, Mitsubishi, or any other approved by Engineer-in-charge.
SITC of 2 Ton Hot and cold split type AC (3 star rating) copper condenser including indoor/ outdoor system and making connections testing etc. complete in all respects. Make:- Voltas , Blue Star , LG, O General, Daikin, Mitsubishi, or any other approved by Engineer-in-charge.
SITC of voltage Stablizer for 1.5 /2 Ton capacity Air conditioner having capacity 12 Amp, working voltage range 170-280 V , time delay 3mts +/- 20sec ITDS with warranty period of 3 Years including making connections testing etc. complete in all respects. Make:- V-Guard , Voltas , LG, Mitsubishi, Microtek or any other approved by Engineer-in-charge.
Supplying and fixing of Copper refrigerant piping with sleeve 1/2x1/4 inches with control cabling beyond 0 running meter for (Hi-wall split unit) with sleeves insulation etc. complete in all respects with best satisfaction of Er-in-Charge.
Supplying and fixing of PVC drain pipe for (Hi-wall split unit) complete in all respects with best satisfaction of Er-in-Charge.
Supplying and fixing of M.S stand for out door unit of suitable size (Readymade) complete in all respects with best satisfactions of Er-in-Charge.
vijan agencies
Bhardwaj Electrical Co.
Sharma and Company
sai electricals
Kumar Enterprises
stage.html
html • 0.05 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_97703.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .