GE (AF) AWA-23/2020-21

Amount

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) including screed bed layer, and rubbish off the premises, complete all as specified and directed.

Demolition of cement concrete un reinforced in ground floors and pavings not exc 15cm thickness (below or above ground level), complete all as specified and directed.

Dismantling of stone slabs or wall tiling including cement mortar bedding (but not backing) including screed bed layer, and rubbish off the premises, complete all as specified and directed.

Dismantling brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc, complete all as specified and directed.

Brick work with old size bricks having crushing strength not less than 75Kg/Sqcm, straight or curved on plan exceeding 6 metre mean radius built in cement mortar (1:6), complete all as specified and directed.

Taking down plastering in cement lime or cement mortor on brick or stone work etc including racking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed.

Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:6), surface finished even and smooth without using extra cement, complete all as specified and directed.

Plain cement concrete, (1:2:4), type B-0 using 12.5mm graded crushed stone aggregate, 25mm thick, surface finished fair and even to receive top layer of flooring, complete all as specified and directed.

Vitrified ceramic (Light shade) coloured/printed tiles Ist quality 9 to 10mm thick (square/ rectangular), area of each tile not exceeding 0.36sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, including 15mm thick screed bed or bedding layer in cement mortar (1:6), complete all as specified and directed.

Vitrified ceramic (Light shade) coloured/printed tiles Ist quality 9 to 10mm thick (square/ rectangular), area of each tile not exceeding 0.36sqm as in skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, including 10mm thick rendering (bedding layer) on brick work or concrete surface in cement mortar (1:4), complete all as specified and directed.

Non skid ceramic coloured/printed tiles (premium quility) 7 to 8mm thick, (square/ rectangular), area of each tile exceeding 0.11sqm, but not exceeding 0.18sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including 10mm thick screed bed or bedding layer in cement mortar (1:6), complete all as specified and directed.

Non skid ceramic coloured/printed tiles (premium quility) 7 to 8mm thick, (square/ rectangular), area of each tile exceeding 0.11sqm, but not exceeding 0.18sqm, on vertical surfaces as in skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, including 10mm thick rendering (bedding layer) on brick/concrete surface in cement mortar (1:4), complete all as specified and directed.

Glazed ceramic coloured/printed tiles of size 450mm x 350mm x 6 to 7mm thick, on vertical surface such as skirting/dado etc set & jointed in cement slurry and pointed with white or coloured cement to match the colour tiles including 10mm thick rendering on brick/concrete surface in cement mortor (1:3) , complete all as specified and directed.

Plain cement concrete, (1:3:6), type C-2 using 40mm graded crushed stone aggregate, 50mm thick, surface finished fair and even , complete all as specified

Plain cement concrete, (1:2:4), type B-2 using 20mm graded crushed stone aggregate, 100 mm thick, surface finished fair and even, complete all as specified

18-20mm thick granite stone (slab) of any colour and type, (table rubbed and polished) work, as in floors/ vertical surfaces, cooking platforms and like, set and jointed in neat cement slurry including pointing in white cement with admixture of pigment to match with shade of granite, complete laid over and including 15mm thick screed bed or bedding layer in cement mortor (1:4), complete all specified and directed.

Machine cut kota stone slab of size 55cmX55cmx 20 to 25 mm thick, as in flooring over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete, laid over and including 20 mm thick screed bed or bedding layer in cement mortor (1:6), complete all specified and directed.

Machine cut kota stone slab of size 55cmX55cmx 20 to 25 mm thick, on vertical surfaces, as in skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement including 15mm thick rendering on brick/concrete surface in cement mortar (1:4), complete all as specified and directed.

Plain cement concrete 1:3:6, type C- 1, using 20mm graded crushed aggregate, 50 mm thick, as in plinth protection, laid in alternate bays, finshed even and smooth without using extra cement having 6mm wide joints throughout the thickness of plinth protection in concrete bays and in between walling and plinth protection, the joint of bays of concrete shall be filled with mastic filling comprising of one part of heated bitumen 85/25 or 90/100 grade and three parts of sand (all by weight), complete all as specified and as directed.

Preparation of newly plastered or un-plastered surfaces of walls and applying three coats of white wash , complete all as specified and directed.

Excavation in trenches n.exc 1.5 metre wide and n.exc 1.5 metre deep for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, laying of cables etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in soft/loose soil, complete all as specified and directed.

Returning filling in soil including spreading leveling, watering and well ramming in layers n. exc 25cm thick, complete all as specified and adirected.

Removing of excavated material (soil) to a distance not exc 50 metres and depositing where directed at a level n.exc 1.5m high from the starting point, complete all as specified and directed.

Plain cement concrete (1:5:10), in foundation filling and mass concrete, complete all as specified and directed.

Taking up or down steel water tubing and connection of size 15mm dia including cleaning for refixing as required, complete all as specified and directed.

Taking up or down steel water tubing and connection of size 20mm dia including cleaning for refixing as required, complete all as specified and directed.

Cutting chases, pinning for concealed water tubing and making good to facing where required and pointing in cement mortar (1:3), cutting exc 10cm but not exc 20cm girth, complete all as specified and directed.

Mild steel galvanised iron medium grade water tubing 15mm bore with screwed & socket joints, with all fittings, such as sockets, bends, elbows, unions, tees, diminishing pieces etc. fixed to wall and ceiling or laid under floors/concealed in wall, complete all as specified and directed.

Mild steel galvanised iron medium grade water tubing 20mm bore with screwed and socket joints, with all fittings, such as sockets, bends, elbows, unions, tees, diminishing pieces etc. fixed to wall and ceiling or laid under floors, complete all as specified and directed.

Description all as per Serial Item No. 29 here-in-before, but except tubing (15mm bore), but including GI fittings as required, complete all as specified and as directed. Note:- Servicable GI pipe retreived from Serial Item No. 26 here-in-before shall be reused.

Description all as per Serial Item No. 30 here-in-before, but except tubing (20mm bore), but including GI fittings as required, complete all as specified and as directed. Note:- Servicable GI pipe retreived from Serial Item No. 27 here-in-before shall be reused.

PVC (SWR) sewage pipes single socketed,75mm bore, in any length with rubber ring joints including bends,elbows and other connecting fiitings as required ,fixed to wall and floor or laid in trenches, complete all as specified and directed.

PVC (SWR) sewage pipes single socketed,110mm bore, in any length with rubber ring joints including bends,elbows and other connecting fiitings as required ,fixed to wall and floor or laid in trenches, complete all as specified and directed.

Vitreous china wash down water closet pan (pedestal pattern) coloured with trap (excluding flushing cistern and flush pipe) and making connection to drain and to flushing pipe etc., including plastic water closet seat cover closed pattern with flat bottom and cover and mild steel chromium plated jet device and PVC connection of suitable length including removing old WC of any description and provision of plain cement concrete (1:2:4) nominal mix, type B-I, using 20mm graded crushed stone aggregate, fixed in repairs, complete all as specified and directed.

Vitreous Chinaware squatting pan, ‘Orrisa pattern’ size 580mm x 440mm, crystal white, with cast iron ‘P’ or ‘S’ trap, front or back inlet, integral foot rest with provision of plain cement concrete (1:2:4) nominal mix, type B-I using 20mm graded crushed stone aggregate, complete all as directed including making connections to trap and to flush pipe, etc and making good to floors to match existing, fixed in repair, all as specified and directed.

PVC seat cover with CP jet for EWC white colour complete with MS hinge chromium plated, fixed in repairs, complete all as specified and directed.

Wash hand basins, Vitreous China (oval type, coloured) size 550mmx400mm, excluding tap etc including brackets with 32 mm bore waste fittings, brass, chromium plated with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed, PVC connections 15mm size with CP brass coupling nuts of length 450mm, trap, grating and Union for discharge pipe, waste, chain and plug and porcelain stopper,chain and plug, PVC 32mm dia waste pipe and all accessories, fixed in repair complete as all specified and directed. Make: Cat Part No. 1008 of Cera or equivalent makes approved by GE as mentioned in Appx 'C'

10 litres capacity PVC valveless syphonic action type low level flushing cistern white including inlet, ball valve, float, PVC connection 450mm long including brackets and 32mm dia flush pipe, complete all as specified and directed.

PVC grating 125mm dia suitable to existing trap as per site requirements, fixed in repairs, complete all as specified and directed.

Bib taps, 15mm bore, cast copper alloy, chromium Plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed in repairs, complete all as specified and directed.

Central hole wash hand basin mixer, 15mm bore, brass chromium plated for hot and cold water, fixed in repairs, complete all as specified and directed.

Stop valve, 15mm bore ,cast copper alloy, chromium plated, fancy type, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed in repairs, complete all as specified and directed.

Description all as per serial item No. 43 here-in-before, but with long shank and cup (concealed type), complete all as specified and directed.

15mm dia, 450mm long, PVC connection with brass nut and washer, fixed in repair, complete all as specified and directed. Make: PRAYAG, PLUMBER.

15mm dia, 600mm long, PVC connection with brass nut and washer, fixed in repair, complete all as specified and directed. Make: PRAYAG, PLUMBER.

Shower rose, fancy type, 125mm size with shower arm, chromium plated, 195mm long with bend of 45° with flange suitable for 15mm bore pipe with swivel joint fixed to pipe in repairs, complete all as specified and directed.

Prepainted galvalume aluminium zinc coating GI based corrugated steel sheeting, with two corrugations side lap fixed with 'L' type or 'J' type or cranked hooked bolts with washers, in roof, 0.50mm thick, grade-O quality, with 120gms/sqm zinc coating and grade 'B' Class 8, complete all as specified and directed.

STEEL CHROMIUM PLATED 20 mm dia heavy duty curtain rod with fixing brackets, fixed in repair, complete all as specified and directed.

Towel rail of size 20mm dia and 600mm long of PTMT, fixed with and including CP brass screws and wooden/plastic cleats (min weight 190gm), complete all as specified and directed.

Prelaminated particle board 18/19mm thick, interior grade,prelaminated both sides with decorative choice lamination and other side balancing white lamination, fixed with nails as in kitchen cabinet/shelves/ cub board shutters including 6mm thick teak wood bead all around , complete all as specified and directed.

Continuous (piano) hinges, brass, width of flaps when open in 30mm, complete all as specified and directed.

50mm dia, cupboard knobs fixed with nut, screw and washer of brass polished, complete all as specified and directed.

Ball catcher with 8mm dia steel ball, and brass body and striking plate including letting in and fixed, complete all as specified and directed.

Hasp and staple, safety type, of size 75mm long, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws, complete all as specified and directed.

Reinforced cement concrete M-15 (nominal Mix) using 20mm graded crushed stone aggregate as in slabs supported on walls , beams, foundations, footings, foundation beams; bases for coloumns, Plinth beam,Columns, pillars, piers, posts and struts, etc.; and mass concrete, complete all as specified and as directed.

TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

Same as item no. 57 here-in-above but 6mm to 8mm diameter.

2nd class soft wood (Kail) clean swan, timber framed and fixed as in scantlings for frame work for ceiling, complete all as specified and directed.

Note :- An amount of Rs. 36,790.00 on account of credit schdule for Sch 'A' Part-II Shall be deducted from the total amount of BOQ to arrive at the contract sum.

M/S Khan ALSABA AUTOMOBILES

BHAT CONTRACTORS AND GENERAL ORDER SUPPLIERS