Loading
Loading…
Loading…
Tender Value
₹1.4 L
EMD Value
₹2,892
Closing Date
4 Sept 2026, 6:55 pm7d left
Executive Engineer REW Pulwama
Executive Engineer REW Pulwama
RDDDC2627105186-CONSTT OF R WALL FENCING AROUND NOOR UL HUDA MASJID SHARIEF BANGUND BLOCK NEWA
2026_RDPR_322450_2
e- NIT No. 106/2026-27 Dated 25-08-2026
Open Tender
Civil Works
Percentage
45 days
Pulwama
Please refer Tender documents.
2 documents required · 2 mandatory
₹200
Executive Engineer REW Pulwama
₹2,892
26 Aug 2026
26 Aug 2026
5 Sept 2026
26 Aug 2026
4 Sept 2026
26 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | CEMENT CONCRETE (CAST-IN-SITU)
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:
4.4.5 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) | 1 | cum | - | - |
| 2 | Supplying and Placing of plum including all carriages/Leads and lifts | 1 | cum | - | - |
| 3 | Centering and shuttering including strutting, propping etc. and removal of form work for:
4.6.1 Foundations, footings, bases for columns | - | sqm | - | - |
| 4 | 12mm thick cement plaster in 1:6 mix | - | sqm | 1 | - |
| 5 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in
foundation and plinth including curing in :
6.1.5 Cement mortar 1:6 ( 1 cement : 6 coarse sand) | - | cum | - | - |
| 6 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
10.2.1 Riveted and bolted10.2.2 Welded | - | kg | 1 | - |
| 7 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. | 262 | kg | 138.2 | ₹36,208.4 |
| 8 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.
13.70.1 Two or more coats on new work | 15 | sqm | 131.85 | ₹1,977.75 |
| 9 | Carriage of sand Aggregates for 20 kms by MT | 6.92 | cum | 465 | ₹3,217.8 |
| 10 | Provision for Sighnboard and Photographs , dewatering , (as approved by Engineer in-charge) Unforseen items | 1 | LS | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.60 MB
BOQ_1081173.xls
BOQ • 0.34 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].