Loading
Loading…
Loading…
Tender Value
₹3.4 Cr
EMD Value
₹5.1 L
Closing Date
22 Jul 2026, 9:30 pm
Public Works Department
Construction of 25 new classrooms in government higher primary and High schools in Devarahubballi, Kalakeri, Halligeri, Devagiriand Kyarakoppa villages of Dharwad Taluk. Kumbarkoppa, Kashenatti, Kambarganavi and Dupenatti villages of Alnavar Taluk and Construction of 3 new classrooms in the Preuniversity college in Dastikoppa village of Kalaghatagi Taluk ( Total 28 classrooms).
PWD/2025-26/BD/WORK_INDENT34272/CALL-2
PWD/2025-26/BD/WORK_INDENT34272/CALL-2
Open
Buildings
PWD Division Office Dharwada
9 documents required · 9 mandatory
List of existing commitments and ongoing works
List of works for which tenders already submitted
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
List of Financial Resources with Certificates
Work Done Certificates obtained from the Competent Authorities
The Tenderer should be a PWD Registered Class II & Above contractor
To qualify for award of this contract each Tenderer in its name should have in the last five years i.e. 2021-22, 2022-23 , 2023-24, 2024-25 & 2025-26 Satisfactorily completed at least 50 Percent of the contract value as prime contractor at least one similar work such as Construction of Building works of value not less than Rs.169.02 Lakhs.
3.3) (a) As per this note, each tenderer should demonstrate availability of few key (a) Availability by owning/ Lease/ Hire basis the following key and critical equipment for this work: For Lease/ Hire basis- relevant documents, commitment agreements etc., shall be scanned and uploaded (Minimum 50% of the required Key machinery should be owned by the Tendered. Remaining 50% of the required machinery may be owned / procured on Lease basis / Hire basis. 1) Self loading Weigh Batch Concrete Mixer - (1 Number - Owned), 2).Transit Mixer - (1 Number- Owned), 3). Tipper - 4Nos (2 Number - Owned & 2 Number- Owned/Hired/Lease), 4). Shuttering Materials (Including scaffolding) - (450 sqm - Owned & 450 sqm - Owned/Hired/Lease), 5). Excavator viz JCB / Hitachi - (2 Number - Owned/Hired/Lease), 6). Pin/Plate vibrators - (04 Number - Owned/Hired/Lease), 7). Water Tanker - (2 Number - Owned/Hired/Lease).
Liquid assets and or availability of credit facilities of not less than Rs.112.68 Lakhs Credit lines or letter of credit or certificates from the banks for meeting the fund requirement etc. LOC or Letter of Credit should be in prescribed format as per KW-4 Bid Document. if not attached then the tender will not be accepted
To qualify for the award of this contract each Tenderer in its name should have in the last five years i.e. 2021-22, 2022-23 , 2023-24, 2024-25 & 2025-26 executed in any one year the following minimum quantities of work 1). Earth work excavation/ Embankment - 2305.05 Cum, 2)Concrete (Including PCC & RCC) - 913.25 Cum, 3) Steel - 61.58 Tonne , 4) Plastering - 4309.62 Sqm, 5) Tiles- 1346.38 Sqm, 6)BBM/SSM/CC Solid Block/Similar Masonry Walls - 771.96 Cum.
Contact details of contractor Should mention valid Email ID, communication Address, Phone Number
BID Capacity AxNx1.5-B
Annual Turnover Certificate along with profit and Loss account statements ITR Returns UDIN is preffered in Turnover Certificate. From 2021-22 to 2025-26
Total value of civil engineering construction works executed and payments received in the last five years 2021-22, 2022-23, 2023-24, 2024-25 & 2025-26 a Achieved in at least Two Financial years a minimum financial turnover in all classes of civil engineering construction works only of Rs. 676.06 Lakhs. with UDIN number
Total value of civil engineering works executed and payments received in the last five years (year-wise)
₹5,000
₹5.1 L
3 Jul 2026
3 Jul 2026
23 Jul 2026
21 Jul 2026
21 Jul 2026
FOR TENDERS upto RS.420.00 LAKHS 64.82
Tender amount 33802345.34 338.03 For Milestone 1: 10140.70 Rs. per day
EMD 1.5% 507035.18 507100 For Milestone 2: 10140.70 Rs. per day
Completion period 9.00 100000 For Milestone 3: 13520.94 Rs. per day
Annual turnover 676.06 407100
Similar nature work 169.02 0.00
LOC Liquidity assets 112.68
Estimated quantities 80%quantities
Total Quantity 80% Quantity
Order Item Details Floor/Lift No. Base Rate Final Rate (Excluding GST) Quantity Net Amount (Excluding GST) Actions 80% 15%
1 Category : Vol - 1 -Chapter -I- Earth Work --- 95 95 17.68 1679.6 14.144 0.00
Item Code : 1.12 0 0.00
Item Description : Mechanical Means - Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. In all kinds of soils upto 300 mm depth 0 0.00 E/W 2305.05
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
2 Category : Vol - 1 -Chapter -I- Earth Work --- 102 102 48.14 4910.28 38.512 0.01
Item Code : 1.14.1 0 0.00
Item Description : Mechanical Means - Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In all kinds of soils Depth upto 3 m 0 0.00 PCC/RCC/PQC 913.25 456.624
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00 STEEL 61.58
3 Category : Vol - 2 -Chapter -4- Anti-Termite Treatment 0 118 118 58.93 6953.74 47.144 0.02
Item Code : 4.1 0 0.00
Item Description : Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. 0 0.00 BBM 771.96
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00 PLASTERING 4309.62
4 Category : Vol - 1 -Chapter -I- Earth Work --- 2682 2682 2.79 7482.78 2.232 0.02
Item Code : 1.23 0 0.00
Item Description : Mechanical Means - Providing and Filling in foundation with granite / trap broken metal 100mm. and down size & with approved sand including hand packing, ramming, watering, including cost of all materials and labour with all lead and lift complete as per specifications. 0 0.00 FLOORING 1346.38
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
5 Category : Vol - 1 -Chapter -II- Concrete Works 0 5918 5918 10.83 64091.94 8.664 0.19
Item Code : 2.1.3 0 0.00 Half BBM 23.95
Item Description : Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. - Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
6 Category : Vol - 1 -Chapter -II- Concrete Works 0 6227 6725.16 9.35 62880.25 7.48 0.19
Item Code : 2.2.3 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
7 Category : Vol - 1 -Chapter -II- Concrete Works 0 6227 10585.9 0.67 7092.55 0.536 0.02
Item Code : 2.4.3 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
8 Category : Vol - 1 -Chapter -I- Earth Work --- 266 266 22.1 5878.6 17.68 0.02
Item Code : 1.9 0 0.00
Item Description : Manual Means - Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
9 Category : Vol - 1 -Chapter -I- Earth Work --- 474 474 57.53 27269.22 46.024 0.08
Item Code : 1.8 0 0.00
Item Description : Manual Means - Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
10 Category : Vol - 1 -Chapter -II- Concrete Works 0 6327 6327 3.51 22207.77 2.808 0.07
Item Code : 2.4.1 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
11 Category : Vol - 2 -Chapter -5- Stone Masonry Works 0 6364 6364 20.09 127852.76 16.072 0.38
Item Code : 5.4 0 0.00
Item Description : Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
12 Category : Vol - 1 -Chapter -II- Concrete Works 0 6734 11447.8 3.36 38464.61 2.688 0.11
Item Code : 2.5.2 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
13 Category : Vol - 1 -Chapter -II- Concrete Works 0 6734 10101 3.98 40201.98 3.184 0.12
Item Code : 2.5.2 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
14 Category : Vol - 1 -Chapter -II- Concrete Works 0 6734 10774.4 5.42 58397.25 4.336 0.17
Item Code : 2.5.2 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
15 Category : Vol - 1 -Chapter -II- Concrete Works 0 6734 9764.3 0.2 1952.86 0.16 0.01
Item Code : 2.5.2 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
16 Category : Vol - 1 -Chapter -II- Concrete Works 0 6734 10101 7.37 74444.37 5.896 0.22
Item Code : 2.5.2 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
17 Category : Vol - 1 -Chapter -II- Concrete Works 0 80195 80195 2.57 206101.15 2.056 0.61
Item Code : 2.11.a 0 0.00
Item Description : Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Buildings 0 0.00
Unit : t 0 0.00
Rate Analaysis Performed ?: No 0 0.00
18 Category : Vol - 2 -Chapter -6- Masonry Works 0 7948 7948 21.81 173345.88 17.448 0.51
Item Code : 6.8 0 0.00
Item Description : Providing Brick work with common burnt clay Non Modular bricks of clasS designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
19 Category : Vol - 2 -Chapter -6- Masonry Works 0 1029 1029 15.24 15681.96 1.6764 1.34112 0.05
Item Code : 6.15 0 0.00
Item Description : Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
20 Category : Vol - 2 -Chapter -8- Finishing 0 293 293 87.6 25666.8 70.08 0.08
Item Code : 8.2.1 0 0.00
Item Description : Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
21 Category : Vol - 2 -Chapter -8- Finishing 0 369 369 143.73 53036.37 114.984 0.16
Item Code : 8.8 0 0.00
Item Description : Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
22 Category : Vol - 2 -Chapter -9- Flooring 0 1541 1541 53.34 82196.94 42.672 0.24
Item Code : 9.34 0 0.00
Item Description : Flooring with 25mm thick polished tandur blue stone slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab, , including cost of materials, labour, curing, polishing complete as per specifications. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
23 Category : Vol - 2 -Chapter -9- Flooring 0 1265 1265 13.5 17077.5 10.8 0.05
Item Code : 9.6.1 0 0.00
Item Description : Providing and laying Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) Light shade pigment using white cement 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
24 Category : Vol - 2 -Chapter -11- Steel and Aluminium Work 0 183 183 253.26 46346.58 202.608 0.14
Item Code : 11.34B 0 0.00
Item Description : Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. 0 0.00
Unit : kg 0 0.00
Rate Analaysis Performed ?: No 0 0.00
25 Category : Vol - 2 -Chapter -11- Steel and Aluminium Work 0 531 531 14.4 7646.4 11.52 0.02
Item Description : Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer- in-charge: Profile E Fixing with adjustable lugs with split end tail to each jamb including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. 0 0.00
Unit : m 0 0.00
Rate Analaysis Performed ?: No 0 0.00
26 Category : Vol - 2 -Chapter -11- Steel and Aluminium Work 0 5221 5221 5.76 30072.96 4.608 0.09
Item Code : 11.4 0 0.00
Item Description : Providing and fixing 1 mm thick M.S. sheet sliding-shutters, with frame and diagonal braces of 40x40x6 mm angle iron, 3 mm M.S. gusset plates at the junctions and corners, 25 mm dia pulley, 40x40x6 mm angle and T- iron guide at the top and bottom respectively, including applying a priming coat of approved steel primer including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
27 Category : Vol - 2 -Chapter -11- Steel and Aluminium Work 0 148 148 69.12 10229.76 55.296 0.03
Item Code : 11.11.1 0 0.00
Item Description : Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. 0 0.00
Unit : kg 0 0.00
Rate Analaysis Performed ?: No 0 0.00
28 Category : Vol - 2 -Chapter -8- Finishing 0 100 100 165.04 16504 132.032 0.05
Item Code : 8.51 0 0.00
Item Description : Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
29 Category : Vol - 2 -Chapter -8- Finishing 0 137 137 165.04 22610.48 132.032 0.07
Item Code : 8.25 0 0.00
Item Description : Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and in- cluding water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
30 Category : Vol - 2 -Chapter -8- Finishing 0 53 53 143.73 7617.69 114.984 0.02
Item Code : 8.27 0 0.00
Item Description : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
31 Category : Vol - 2 -Chapter -8- Finishing 0 89 89 143.73 12791.97 114.984 0.04
Item Code : 8.28 0 0.00
Item Description : Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
32 Category : Vol - 2 -Chapter -8- Finishing 0 50 50 26.46 1323 21.168 0.00
Item Code : 8.34.3 0 0.00
Item Description : Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
33 Category : Vol - 2 -Chapter -8- Finishing 0 115 115 26.46 3042.9 21.168 0.01
Item Code : 8.40 0 0.00
Item Description : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
34 Category : Vol - 2 -Chapter -8- Finishing 0 4 4 2000 8000 1600 0.02
Item Code : 8.49 0 0.00
Item Description : Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : per letter per cm height 0 0.00
Rate Analaysis Performed ?: No 0 0.00
35 Category : Vol - 2 -Chapter -8- Finishing 0 94 94 5.76 541.44 4.608 0.00
Item Code : 8.43 0 0.00
Item Description : Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade :Two coats on new work including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
36 Category : Vol - 2 -Chapter -13- Water Supply & Plumbing Work 0 291 291 11 3201 8.8 0.01
Item Code : 13.48 0 0.00
Item Description : Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 100 mm diameter 0 0.00
Unit : m 0 0.00
Rate Analaysis Performed ?: No 0 0.00
S.No Item Details Rate INR (Excluding GST) Quantity Is BuyBack Minimum BuyBack Value 0.00
1 Item Code : Vol 6, Item no-1.2.1 66 20 No --- 1320 16 0.00
Item Name : Concealed Conduit System :Supplying heavy gauge PVC conduit pipe mm dia mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary19/20mm dia 2mm thick 0 0.00
Unit : Mtr 0 0.00
2 Item Code : Vol 6, Item no-1.2.2 78 10 No --- 780 8 0.00
Item Name : Concealed Conduit System :Supplying heavy gauge PVC conduit pipe . mm dia.mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary25mm dia 2mm thick 0 0.00
Unit : Mtr 0 0.00
3 Item Code : Vol 6, Item no-1.3.1 68 10 No --- 680 8 0.00
Item Name : Supplying heavy gauge PVC Conduit Pipe.mmthick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary.19/20mm dia 2mm thick 0 0.00
Unit : Mtr 0 0.00
4 Item Code : Vol 6, Item no-1.3.2 79 5 No --- 395 4 0.00
Item Name : Supplying heavy gauge PVC Conduit Pipe.mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary.25mm dia 2mm thick 0 0.00
Unit : Mtr 0 0.00
5 Item Code : Vol 6, Item no-2.2.1 269 2 No --- 538 1.6 0.00
Item Name : Point wiring using Copper wire with out switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2 X1.5Sq.mm (Phase&Neutral) &1x1.0 Sqmm(earth Wire)Cable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Short point upto3mtr from tapping point to out let via Switch 0 0.00
Unit : Point 0 0.00
6 Item Code : Vol 6, Item no-2.2.2 379 3 No --- 1137 2.4 0.00
Item Name : Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch 0 0.00
Unit : Point 0 0.00
7 Item Code : Vol 6, Item no-2.2.3 555 4 No --- 2220 3.2 0.01
Item Name : Long point above 6Mtr upto 10Mtr from tapping point to out let via switch box 0 0.00
Unit : Point 0 0.00
8 Item Code : Vol 6, Item no-2.3.2 26 40 No --- 1040 32 0.00
Item Name : Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade,1.5 SQMM multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & confirming to GTP. 0 0.00
Unit : Mtr 0 0.00
9 Item Code : Vol 6, Item no-2.3.3 42 40 No --- 1680 32 0.00
Item Name : Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade,2.5 SQMM multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & confirming to GTP. 0 0.00
Unit : Mtr 0 0.00
10 Item Code : Vol 6, Item no-2.3.4 63 30 No --- 1890 24 0.01
Item Name : Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade,4 SQMM multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & confirming to GTP. 0 0.00
Unit : Mtr 0 0.00
11 Item Code : Vol 6, Item no-3.4.6 319 2 No --- 638 1.6 0.00
Item Name : Supplying and flush mounting powder coated / galvanized metal box size10-12way suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 0 0.00
Unit : Each 0 0.00
12 Item Code : Vol 6, Item no-3.5.6 344 2 No --- 688 1.6 0.00
Item Name : Supplying and fixing superior quality 10-12Mudular modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metalbox. 0 0.00
Unit : Each 0 0.00
13 Item Code : Vol 6, Item no-3.6.1 102 8 No --- 816 6.4 0.00
Item Name : Supplying and fixing of 6Amps 0ne way modular switch on existing modular switch plate as per IS 3854 and IS 1293. 0 0.00
Unit : Each 0 0.00
14 Item Code : Vol 6, Item no-3.6.3 171 3 No --- 513 2.4 0.00
Item Name : Supplying and fixing of 6Amps 3way modular Socketc on existing modular switch plate as per IS 3854 and IS 1293. 0 0.00
Unit : Each 0 0.00
15 Item Code : Vol 6, Item no-3.6.4 357 2 No --- 714 1.6 0.00
Item Name : Supplying and fixing of modular stepped electronic fan regulator on existing modular switch plate as per and IS 1293. 0 0.00
Unit : Each 0 0.00
16 Item Code : Vol 6, Item no-5.18.4 739 1 No --- 739 0.8 0.00
Item Name : Supplying and fixingof 6to32 Amps Double pole miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 0 0.00
Unit : Each 0 0.00
17 Item Code : Vol 6, Item no-12.56 3510 1 No --- 3510 0.8 0.01
Item Name : Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should be filled with equal proportion of salt and charcoal 150 mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per lSI specification 7.3.3. of IS 732 using 12 mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia 0 0.00
Unit : Each 0 0.00
18 Item Code : Vol 6, Item no-6.3.1 2984 2 No --- 5968 1.6 0.02
Item Name : Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system. 48" Sweep (1200mm) Regular model 0 0.00
Unit : Each 0 0.00
19 Item Code : Vol 6, Item no-11.3.2 690 6 No --- 4140 4.8 0.01
Item Name : LED Indoor Supplying of 1x4' feet - LED PVC Square Batten 20/22W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI more than 80. Power Input: 220-240V @ 50Hz & Power factor more than 0.9 along with CE approved drivers. 2 years Warranty against any manufacturing defect working under standard electrical condition 0 0.00
Unit : Each 0 0.00
1 Category : Vol - 1 -Chapter -I- Earth Work --- 95 95 51.85 4925.75 41.48 0.01
Item Code : 1.12 0 0.00
Item Description : Mechanical Means - Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. In all kinds of soils upto 300 mm depth 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
2 Category : Vol - 1 -Chapter -I- Earth Work --- 102 102 140.67 14348.34 112.536 0.04
Item Code : 1.14.1 0 0.00
Item Description : Mechanical Means - Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In all kinds of soils Depth upto 3 m 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
3 Category : Vol - 2 -Chapter -4- Anti-Termite Treatment 0 118 118 172.83 20393.94 138.264 0.06
Item Code : 4.1 0 0.00
Item Description : Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
4 Category : Vol - 1 -Chapter -I- Earth Work --- 2682 2682 7.66 20544.12 6.128 0.06
Item Code : 1.23 0 0.00
Item Description : Mechanical Means - Providing and Filling in foundation with granite / trap broken metal 100mm. and down size & with approved sand including hand packing, ramming, watering, including cost of all materials and labour with all lead and lift complete as per specifications. 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
5 Category : Vol - 1 -Chapter -II- Concrete Works 0 5918 5918 31.09 183990.62 24.872 0.54
Item Code : 2.1.3 0 0.00
Item Description : Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. - Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
6 Category : Vol - 1 -Chapter -II- Concrete Works 0 6227 6725.16 25.8 173509.13 20.64 0.51
Item Code : 2.2.3 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
7 Category : Vol - 1 -Chapter -II- Concrete Works 0 6227 10585.9 2.1 22230.39 1.68 0.07
Item Code : 2.4.3 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
8 Category : Vol - 1 -Chapter -I- Earth Work --- 266 266 74.14 19721.24 59.312 0.06
Item Code : 1.9 0 0.00
Item Description : Manual Means - Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
9 Category : Vol - 1 -Chapter -I- Earth Work --- 474 474 142.36 67478.64 113.888 0.20
Item Code : 1.8 0 0.00
Item Description : Manual Means - Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
10 Category : Vol - 1 -Chapter -II- Concrete Works 0 6327 6327 7.22 45680.94 5.776 0.14
Item Code : 2.4.1 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
11 Category : Vol - 2 -Chapter -5- Stone Masonry Works 0 6364 6364 51.73 329209.72 41.384 0.97
Item Code : 5.4 0 0.00
Item Description : Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
12 Category : Vol - 1 -Chapter -II- Concrete Works 0 6734 11447.8 7.82 89521.8 6.256 0.26
Item Code : 2.5.2 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
13 Category : Vol - 1 -Chapter -II- Concrete Works 0 6734 10101 10.38 104848.38 8.304 0.31
Item Code : 2.5.2 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
14 Category : Vol - 1 -Chapter -II- Concrete Works 0 6734 10774.4 13.97 150518.37 11.176 0.45
Item Code : 2.5.2 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
15 Category : Vol - 1 -Chapter -II- Concrete Works 0 6734 9764.3 0.61 5956.22 0.488 0.02
Item Code : 2.5.2 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
16 Category : Vol - 1 -Chapter -II- Concrete Works 0 6734 10101 21.6 218181.6 17.28 0.65
Item Code : 2.5.2 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
17 Category : Vol - 1 -Chapter -II- Concrete Works 0 80195 80195 6.42 514851.9 5.136 1.52
Item Code : 2.11.a 0 0.00
Item Description : Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Buildings 0 0.00
Unit : t 0 0.00
Rate Analaysis Performed ?: No 0 0.00
18 Category : Vol - 2 -Chapter -6- Masonry Works 0 7948 7948 53.53 425456.44 42.824 1.26
Item Code : 6.8 0 0.00
Item Description : Providing Brick work with common burnt clay Non Modular bricks of clasS designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
19 Category : Vol - 2 -Chapter -6- Masonry Works 0 1029 1029 34.2 35191.8 3.762 3.0096 0.10
Item Code : 6.15 0 0.00
Item Description : Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
20 Category : Vol - 2 -Chapter -8- Finishing 0 293 293 251.28 73625.04 201.024 0.22
Item Code : 8.2.1 0 0.00
Item Description : Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
21 Category : Vol - 2 -Chapter -8- Finishing 0 369 369 289.68 106891.92 231.744 0.32
Item Code : 8.8 0 0.00
Item Description : Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
22 Category : Vol - 2 -Chapter -9- Flooring 0 1541 1541 160.02 246590.82 128.016 0.73
Item Code : 9.34 0 0.00
Item Description : Flooring with 25mm thick polished tandur blue stone slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab, , including cost of materials, labour, curing, polishing complete as per specifications. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
23 Category : Vol - 2 -Chapter -9- Flooring 0 1265 1265 14.25 18026.25 11.4 0.05
Item Code : 9.6.1 0 0.00
Item Description : Providing and laying Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) Light shade pigment using white cement 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
24 Category : Vol - 2 -Chapter -11- Steel and Aluminium Work 0 183 183 495.18 90617.94 396.144 0.27
Item Code : 11.34B 0 0.00
Item Description : Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. 0 0.00
Unit : kg 0 0.00
Rate Analaysis Performed ?: No 0 0.00
25 Category : Vol - 2 -Chapter -11- Steel and Aluminium Work 0 531 531 43.2 22939.2 34.56 0.07
Item Description : Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer- in-charge: Profile E Fixing with adjustable lugs with split end tail to each jamb including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. 0 0.00
Unit : m 0 0.00
Rate Analaysis Performed ?: No 0 0.00
26 Category : Vol - 2 -Chapter -11- Steel and Aluminium Work 0 5221 5221 17.28 90218.88 13.824 0.27
Item Code : 11.4 0 0.00
Item Description : Providing and fixing 1 mm thick M.S. sheet sliding-shutters, with frame and diagonal braces of 40x40x6 mm angle iron, 3 mm M.S. gusset plates at the junctions and corners, 25 mm dia pulley, 40x40x6 mm angle and T- iron guide at the top and bottom respectively, including applying a priming coat of approved steel primer including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
27 Category : Vol - 2 -Chapter -11- Steel and Aluminium Work 0 148 148 259.2 38361.6 207.36 0.11
Item Code : 11.11.1 0 0.00
Item Description : Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. 0 0.00
Unit : kg 0 0.00
Rate Analaysis Performed ?: No 0 0.00
28 Category : Vol - 2 -Chapter -8- Finishing 0 100 100 483.6 48360 386.88 0.14
Item Code : 8.51 0 0.00
Item Description : Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
29 Category : Vol - 2 -Chapter -8- Finishing 0 137 137 483.6 66253.2 386.88 0.20
Item Code : 8.25 0 0.00
Item Description : Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and in- cluding water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
30 Category : Vol - 2 -Chapter -8- Finishing 0 53 53 289.68 15353.04 231.744 0.05
Item Code : 8.27 0 0.00
Item Description : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
31 Category : Vol - 2 -Chapter -8- Finishing 0 89 89 289.68 25781.52 231.744 0.08
Item Code : 8.28 0 0.00
Item Description : Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
32 Category : Vol - 2 -Chapter -8- Finishing 0 50 50 66.78 3339 53.424 0.01
Item Code : 8.34.3 0 0.00
Item Description : Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
33 Category : Vol - 2 -Chapter -8- Finishing 0 115 115 66.78 7679.7 53.424 0.02
Item Code : 8.40 0 0.00
Item Description : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
34 Category : Vol - 2 -Chapter -8- Finishing 0 4 4 2000 8000 1600 0.02
Item Code : 8.49 0 0.00
Item Description : Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : per letter per cm height 0 0.00
Rate Analaysis Performed ?: No 0 0.00
35 Category : Vol - 2 -Chapter -8- Finishing 0 94 94 17.28 1624.32 13.824 0.00
Item Code : 8.43 0 0.00
Item Description : Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade :Two coats on new work including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
36 Category : Vol - 2 -Chapter -13- Water Supply & Plumbing Work 0 291 291 33 9603 26.4 0.03
Item Code : 13.48 0 0.00
Item Description : Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 100 mm diameter 0 0.00
Unit : m 0 0.00
Rate Analaysis Performed ?: No 0 0.00
1 Item Code : Vol 6, Item no-1.2.1 66 60 No --- 3960 48 0.01
Item Name : Concealed Conduit System :Supplying heavy gauge PVC conduit pipe mm dia mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary19/20mm dia 2mm thick 0 0.00
Unit : Mtr 0 0.00
2 Item Code : Vol 6, Item no-1.2.2 78 30 No --- 2340 24 0.01
Item Name : Concealed Conduit System :Supplying heavy gauge PVC conduit pipe . mm dia.mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary25mm dia 2mm thick 0 0.00
Unit : Mtr 0 0.00
3 Item Code : Vol 6, Item no-1.3.1 68 30 No --- 2040 24 0.01
Item Name : Supplying heavy gauge PVC Conduit Pipe.mmthick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary.19/20mm dia 2mm thick 0 0.00
Unit : Mtr 0 0.00
4 Item Code : Vol 6, Item no-1.3.2 79 15 No --- 1185 12 0.00
Item Name : Supplying heavy gauge PVC Conduit Pipe.mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary.25mm dia 2mm thick 0 0.00
Unit : Mtr 0 0.00
5 Item Code : Vol 6, Item no-2.2.1 269 6 No --- 1614 4.8 0.00
Item Name : Point wiring using Copper wire with out switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2 X1.5Sq.mm (Phase&Neutral) &1x1.0 Sqmm(earth Wire)Cable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Short point upto3mtr from tapping point to out let via Switch 0 0.00
Unit : Point 0 0.00
6 Item Code : Vol 6, Item no-2.2.2 379 9 No --- 3411 7.2 0.01
Item Name : Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch 0 0.00
Unit : Point 0 0.00
7 Item Code : Vol 6, Item no-2.2.3 555 12 No --- 6660 9.6 0.02
Item Name : Long point above 6Mtr upto 10Mtr from tapping point to out let via switch box 0 0.00
Unit : Point 0 0.00
8 Item Code : Vol 6, Item no-2.3.2 26 120 No --- 3120 96 0.01
Item Name : Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade,1.5 SQMM multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & confirming to GTP. 0 0.00
Unit : Mtr 0 0.00
9 Item Code : Vol 6, Item no-2.3.3 42 120 No --- 5040 96 0.01
Item Name : Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade,2.5 SQMM multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & confirming to GTP. 0 0.00
Unit : Mtr 0 0.00
10 Item Code : Vol 6, Item no-2.3.4 63 90 No --- 5670 72 0.02
Item Name : Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade,4 SQMM multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & confirming to GTP. 0 0.00
Unit : Mtr 0 0.00
11 Item Code : Vol 6, Item no-3.4.6 319 6 No --- 1914 4.8 0.01
Item Name : Supplying and flush mounting powder coated / galvanized metal box size10-12way suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 0 0.00
Unit : Each 0 0.00
12 Item Code : Vol 6, Item no-3.5.6 344 6 No --- 2064 4.8 0.01
Item Name : Supplying and fixing superior quality 10-12Mudular modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metalbox. 0 0.00
Unit : Each 0 0.00
Item Name : Supplying and fixing of 6Amps 0ne way modular switch on existing modular switch plate as per IS 3854 and IS 1293. 0 0.00
Unit : Each 0 0.00
14 Item Code : Vol 6, Item no-3.6.3 171 9 No --- 1539 7.2 0.00
Item Name : Supplying and fixing of 6Amps 3way modular Socketc on existing modular switch plate as per IS 3854 and IS 1293. 0 0.00
Unit : Each 0 0.00
15 Item Code : Vol 6, Item no-3.6.4 357 6 No --- 2142 4.8 0.01
Item Name : Supplying and fixing of modular stepped electronic fan regulator on existing modular switch plate as per and IS 1293. 0 0.00
Unit : Each 0 0.00
16 Item Code : Vol 6, Item no-5.18.4 739 3 No --- 2217 2.4 0.01
Item Name : Supplying and fixingof 6to32 Amps Double pole miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 0 0.00
Unit : Each 0 0.00
Item Name : Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should be filled with equal proportion of salt and charcoal 150 mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per lSI specification 7.3.3. of IS 732 using 12 mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia 0 0.00
Unit : Each 0 0.00
Item Name : Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system. 48" Sweep (1200mm) Regular model 0 0.00
Unit : Each 0 0.00
Item Name : LED Indoor Supplying of 1x4' feet - LED PVC Square Batten 20/22W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI more than 80. Power Input: 220-240V @ 50Hz & Power factor more than 0.9 along with CE approved drivers. 2 years Warranty against any manufacturing defect working under standard electrical condition 0 0.00
Unit : Each 0 0.00
1 Category : Vol - 1 -Chapter -I- Earth Work --- 95 95 43.53 4135.35 34.824 0.01
Item Code : 1.12 0 0.00
Item Description : Mechanical Means - Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. In all kinds of soils upto 300 mm depth 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
2 Category : Vol - 1 -Chapter -I- Earth Work --- 102 102 94.52 9641.04 75.616 0.03
Item Code : 1.14.1 0 0.00
Item Description : Mechanical Means - Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In all kinds of soils Depth upto 3 m 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
3 Category : Vol - 2 -Chapter -4- Anti-Termite Treatment 0 118 118 145.09 17120.62 116.072 0.05
Item Code : 4.1 0 0.00
Item Description : Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
4 Category : Vol - 1 -Chapter -I- Earth Work --- 2682 2682 4.44 11908.08 3.552 0.04
Item Code : 1.23 0 0.00
Item Description : Mechanical Means - Providing and Filling in foundation with granite / trap broken metal 100mm. and down size & with approved sand including hand packing, ramming, watering, including cost of all materials and labour with all lead and lift complete as per specifications. 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
5 Category : Vol - 1 -Chapter -II- Concrete Works 0 5918 5918 21.6 127828.8 17.28 0.38
Item Code : 2.1.3 0 0.00
Item Description : Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. - Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
6 Category : Vol - 1 -Chapter -II- Concrete Works 0 6227 6725.16 19.42 130602.61 15.536 0.39
Item Code : 2.2.3 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
7 Category : Vol - 1 -Chapter -II- Concrete Works 0 6227 10585.9 1.12 11856.21 0.896 0.04
Item Code : 2.4.3 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
8 Category : Vol - 1 -Chapter -I- Earth Work --- 266 266 51.8 13778.8 41.44 0.04
Item Code : 1.9 0 0.00
Item Description : Manual Means - Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
9 Category : Vol - 1 -Chapter -I- Earth Work --- 474 474 119.52 56652.48 95.616 0.17
Item Code : 1.8 0 0.00
Item Description : Manual Means - Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
10 Category : Vol - 1 -Chapter -II- Concrete Works 0 6327 6327 3.51 22207.77 2.808 0.07
Item Code : 2.4.1 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
11 Category : Vol - 2 -Chapter -5- Stone Masonry Works 0 6364 6364 35.28 224521.92 28.224 0.66
Item Code : 5.4 0 0.00
Item Description : Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
12 Category : Vol - 1 -Chapter -II- Concrete Works 0 6734 11447.8 5.56 63649.77 4.448 0.19
Item Code : 2.5.2 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
13 Category : Vol - 1 -Chapter -II- Concrete Works 0 6734 10101 8 80808 6.4 0.24
Item Code : 2.5.2 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
14 Category : Vol - 1 -Chapter -II- Concrete Works 0 6734 10774.4 11.4 122828.16 9.12 0.36
Item Code : 2.5.2 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
15 Category : Vol - 1 -Chapter -II- Concrete Works 0 6734 9764.3 0.41 4003.36 0.328 0.01
Item Code : 2.5.2 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
16 Category : Vol - 1 -Chapter -II- Concrete Works 0 6734 10101 18.14 183232.14 14.512 0.54
Item Code : 2.5.2 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
17 Category : Vol - 1 -Chapter -II- Concrete Works 0 80195 80195 6.33 507634.35 5.064 1.50
Item Code : 2.11.a 0 0.00
Item Description : Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Buildings 0 0.00
Unit : t 0 0.00
Rate Analaysis Performed ?: No 0 0.00
18 Category : Vol - 2 -Chapter -6- Masonry Works 0 7948 7948 40.3 320304.4 32.24 0.95
Item Code : 6.8 0 0.00
Item Description : Providing Brick work with common burnt clay Non Modular bricks of clasS designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
19 Category : Vol - 2 -Chapter -6- Masonry Works 0 1029 1029 27.6 28400.4 3.036 2.4288 0.08
Item Code : 6.15 0 0.00
Item Description : Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
20 Category : Vol - 2 -Chapter -8- Finishing 0 293 293 205.44 60193.92 164.352 0.18
Item Code : 8.2.1 0 0.00
Item Description : Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
21 Category : Vol - 2 -Chapter -8- Finishing 0 369 369 262.63 96910.47 210.104 0.29
Item Code : 8.8 0 0.00
Item Description : Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
22 Category : Vol - 2 -Chapter -9- Flooring 0 1541 1541 134.76 207665.16 107.808 0.61
Item Code : 9.34 0 0.00
Item Description : Flooring with 25mm thick polished tandur blue stone slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab, , including cost of materials, labour, curing, polishing complete as per specifications. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
23 Category : Vol - 2 -Chapter -11- Steel and Aluminium Work 0 183 183 487.62 89234.46 390.096 0.26
Item Code : 11.34B 0 0.00
Item Description : Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. 0 0.00
Unit : kg 0 0.00
Rate Analaysis Performed ?: No 0 0.00
24 Category : Vol - 2 -Chapter -11- Steel and Aluminium Work 0 531 531 28.8 15292.8 23.04 0.05
Item Description : Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer- in-charge: Profile E Fixing with adjustable lugs with split end tail to each jamb including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. 0 0.00
Unit : m 0 0.00
Rate Analaysis Performed ?: No 0 0.00
25 Category : Vol - 2 -Chapter -11- Steel and Aluminium Work 0 5221 5221 11.52 60145.92 9.216 0.18
Item Code : 11.4 0 0.00
Item Description : Providing and fixing 1 mm thick M.S. sheet sliding-shutters, with frame and diagonal braces of 40x40x6 mm angle iron, 3 mm M.S. gusset plates at the junctions and corners, 25 mm dia pulley, 40x40x6 mm angle and T- iron guide at the top and bottom respectively, including applying a priming coat of approved steel primer including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
26 Category : Vol - 2 -Chapter -11- Steel and Aluminium Work 0 148 148 207.36 30689.28 165.888 0.09
Item Code : 11.11.1 0 0.00
Item Description : Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. 0 0.00
Unit : kg 0 0.00
Rate Analaysis Performed ?: No 0 0.00
27 Category : Vol - 2 -Chapter -8- Finishing 0 100 100 332.4 33240 265.92 0.10
Item Code : 8.51 0 0.00
Item Description : Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
28 Category : Vol - 2 -Chapter -8- Finishing 0 137 137 332.4 45538.8 265.92 0.13
Item Code : 8.25 0 0.00
Item Description : Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and in- cluding water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
29 Category : Vol - 2 -Chapter -8- Finishing 0 53 53 262.63 13919.39 210.104 0.04
Item Code : 8.27 0 0.00
Item Description : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
30 Category : Vol - 2 -Chapter -8- Finishing 0 89 89 262.63 23374.07 210.104 0.07
Item Code : 8.28 0 0.00
Item Description : Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
31 Category : Vol - 2 -Chapter -8- Finishing 0 50 50 54.9 2745 43.92 0.01
Item Code : 8.34.3 0 0.00
Item Description : Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
32 Category : Vol - 2 -Chapter -8- Finishing 0 115 115 54.9 6313.5 43.92 0.02
Item Code : 8.40 0 0.00
Item Description : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
33 Category : Vol - 2 -Chapter -8- Finishing 0 4 4 2000 8000 1600 0.02
Item Code : 8.49 0 0.00
Item Description : Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : per letter per cm height 0 0.00
Rate Analaysis Performed ?: No 0 0.00
34 Category : Vol - 2 -Chapter -8- Finishing 0 94 94 11.52 1082.88 9.216 0.00
Item Code : 8.43 0 0.00
Item Description : Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade :Two coats on new work including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
35 Category : Vol - 2 -Chapter -13- Water Supply & Plumbing Work 0 291 291 22 6402 17.6 0.02
Item Code : 13.48 0 0.00
Item Description : Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 100 mm diameter 0 0.00
Unit : m 0 0.00
Rate Analaysis Performed ?: No 0 0.00
1 Item Code : Vol 6, Item no-1.2.1 66 40 No --- 2640 32 0.01
Item Name : Concealed Conduit System :Supplying heavy gauge PVC conduit pipe mm dia mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary19/20mm dia 2mm thick 0 0.00
Unit : Mtr 0 0.00
2 Item Code : Vol 6, Item no-1.2.2 78 20 No --- 1560 16 0.00
Item Name : Concealed Conduit System :Supplying heavy gauge PVC conduit pipe . mm dia.mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary25mm dia 2mm thick 0 0.00
Unit : Mtr 0 0.00
3 Item Code : Vol 6, Item no-1.3.1 68 20 No --- 1360 16 0.00
Item Name : Supplying heavy gauge PVC Conduit Pipe.mmthick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary.19/20mm dia 2mm thick 0 0.00
Unit : Mtr 0 0.00
4 Item Code : Vol 6, Item no-1.3.2 79 10 No --- 790 8 0.00
Item Name : Supplying heavy gauge PVC Conduit Pipe.mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary.25mm dia 2mm thick 0 0.00
Unit : Mtr 0 0.00
5 Item Code : Vol 6, Item no-2.2.1 269 4 No --- 1076 3.2 0.00
Item Name : Point wiring using Copper wire with out switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2 X1.5Sq.mm (Phase&Neutral) &1x1.0 Sqmm(earth Wire)Cable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Short point upto3mtr from tapping point to out let via Switch 0 0.00
Unit : Point 0 0.00
6 Item Code : Vol 6, Item no-2.2.2 379 6 No --- 2274 4.8 0.01
Item Name : Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch 0 0.00
Unit : Point 0 0.00
7 Item Code : Vol 6, Item no-2.2.3 555 8 No --- 4440 6.4 0.01
Item Name : Long point above 6Mtr upto 10Mtr from tapping point to out let via switch box 0 0.00
Unit : Point 0 0.00
8 Item Code : Vol 6, Item no-2.3.2 26 80 No --- 2080 64 0.01
Item Name : Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade,1.5 SQMM multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & confirming to GTP. 0 0.00
Unit : Mtr 0 0.00
9 Item Code : Vol 6, Item no-2.3.3 42 80 No --- 3360 64 0.01
Item Name : Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade,2.5 SQMM multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & confirming to GTP. 0 0.00
Unit : Mtr 0 0.00
10 Item Code : Vol 6, Item no-2.3.4 63 60 No --- 3780 48 0.01
Item Name : Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade,4 SQMM multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & confirming to GTP. 0 0.00
Unit : Mtr 0 0.00
11 Item Code : Vol 6, Item no-3.4.6 319 4 No --- 1276 3.2 0.00
Item Name : Supplying and flush mounting powder coated / galvanized metal box size10-12way suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 0 0.00
Unit : Each 0 0.00
12 Item Code : Vol 6, Item no-3.5.6 344 4 No --- 1376 3.2 0.00
Item Name : Supplying and fixing superior quality 10-12Mudular modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metalbox. 0 0.00
Unit : Each 0 0.00
Item Name : Supplying and fixing of 6Amps 0ne way modular switch on existing modular switch plate as per IS 3854 and IS 1293. 0 0.00
Unit : Each 0 0.00
14 Item Code : Vol 6, Item no-3.6.3 171 6 No --- 1026 4.8 0.00
Item Name : Supplying and fixing of 6Amps 3way modular Socketc on existing modular switch plate as per IS 3854 and IS 1293. 0 0.00
Unit : Each 0 0.00
15 Item Code : Vol 6, Item no-3.6.4 357 4 No --- 1428 3.2 0.00
Item Name : Supplying and fixing of modular stepped electronic fan regulator on existing modular switch plate as per and IS 1293. 0 0.00
Unit : Each 0 0.00
16 Item Code : Vol 6, Item no-5.18.4 739 2 No --- 1478 1.6 0.00
Item Name : Supplying and fixingof 6to32 Amps Double pole miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 0 0.00
Unit : Each 0 0.00
17 Item Code : Vol 6, Item no-12.56 3510 2 No --- 7020 1.6 0.02
Item Name : Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should be filled with equal proportion of salt and charcoal 150 mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per lSI specification 7.3.3. of IS 732 using 12 mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia 0 0.00
Unit : Each 0 0.00
Item Name : Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system. 48" Sweep (1200mm) Regular model 0 0.00
Unit : Each 0 0.00
Item Name : LED Indoor Supplying of 1x4' feet - LED PVC Square Batten 20/22W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI more than 80. Power Input: 220-240V @ 50Hz & Power factor more than 0.9 along with CE approved drivers. 2 years Warranty against any manufacturing defect working under standard electrical condition 0 0.00
Unit : Each 0 0.00
1 Category : Vol - 1 -Chapter -I- Earth Work --- 95 95 51.85 4925.75 41.48 0.01
Item Code : 1.12 0 0.00
Item Description : Mechanical Means - Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. In all kinds of soils upto 300 mm depth 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
2 Category : Vol - 1 -Chapter -I- Earth Work --- 102 102 152.07 15511.14 121.656 0.05
Item Code : 1.14.1 0 0.00
Item Description : Mechanical Means - Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In all kinds of soils Depth upto 3 m 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
3 Category : Vol - 2 -Chapter -4- Anti-Termite Treatment 0 118 118 172.83 20393.94 138.264 0.06
Item Code : 4.1 0 0.00
Item Description : Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
4 Category : Vol - 1 -Chapter -I- Earth Work --- 2682 2682 6.52 17486.64 5.216 0.05
Item Code : 1.23 0 0.00
Item Description : Mechanical Means - Providing and Filling in foundation with granite / trap broken metal 100mm. and down size & with approved sand including hand packing, ramming, watering, including cost of all materials and labour with all lead and lift complete as per specifications. 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
5 Category : Vol - 1 -Chapter -II- Concrete Works 0 5918 5918 31.78 188074.04 25.424 0.56
Item Code : 2.1.3 0 0.00
Item Description : Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. - Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
6 Category : Vol - 1 -Chapter -II- Concrete Works 0 6227 6725.16 29.54 198661.23 23.632 0.59
Item Code : 2.2.3 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
7 Category : Vol - 1 -Chapter -II- Concrete Works 0 6227 10585.9 2.1 22230.39 1.68 0.07
Item Code : 2.4.3 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
8 Category : Vol - 1 -Chapter -I- Earth Work --- 266 266 90.51 24075.66 72.408 0.07
Item Code : 1.9 0 0.00
Item Description : Manual Means - Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
9 Category : Vol - 1 -Chapter -I- Earth Work --- 474 474 140.9 66786.6 112.72 0.20
Item Code : 1.8 0 0.00
Item Description : Manual Means - Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
10 Category : Vol - 1 -Chapter -II- Concrete Works 0 6327 6327 5.66 35810.82 4.528 0.11
Item Code : 2.4.1 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
11 Category : Vol - 2 -Chapter -5- Stone Masonry Works 0 6364 6364 43.45 276515.8 34.76 0.82
Item Code : 5.4 0 0.00
Item Description : Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
12 Category : Vol - 1 -Chapter -II- Concrete Works 0 6734 11447.8 7.82 89521.8 6.256 0.26
Item Code : 2.5.2 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
13 Category : Vol - 1 -Chapter -II- Concrete Works 0 6734 10101 10.38 104848.38 8.304 0.31
Item Code : 2.5.2 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
14 Category : Vol - 1 -Chapter -II- Concrete Works 0 6734 10774.4 13 140067.2 10.4 0.41
Item Code : 2.5.2 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
15 Category : Vol - 1 -Chapter -II- Concrete Works 0 6734 9764.3 0.61 5956.22 0.488 0.02
Item Code : 2.5.2 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
16 Category : Vol - 1 -Chapter -II- Concrete Works 0 6734 10101 21.6 218181.6 17.28 0.65
Item Code : 2.5.2 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
17 Category : Vol - 1 -Chapter -II- Concrete Works 0 80195 80195 6.61 530088.95 5.288 1.57
Item Code : 2.11.a 0 0.00
Item Description : Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Buildings 0 0.00
Unit : t 0 0.00
Rate Analaysis Performed ?: No 0 0.00
18 Category : Vol - 2 -Chapter -6- Masonry Works 0 7948 7948 52.38 416316.24 41.904 1.23
Item Code : 6.8 0 0.00
Item Description : Providing Brick work with common burnt clay Non Modular bricks of clasS designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
19 Category : Vol - 2 -Chapter -6- Masonry Works 0 1029 1029 5.4 5556.6 0.594 0.4752 0.02
Item Code : 6.15 0 0.00
Item Description : Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
20 Category : Vol - 2 -Chapter -8- Finishing 0 293 293 222.48 65186.64 177.984 0.19
Item Code : 8.2.1 0 0.00
Item Description : Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
21 Category : Vol - 2 -Chapter -8- Finishing 0 369 369 260.88 96264.72 208.704 0.28
Item Code : 8.8 0 0.00
Item Description : Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
22 Category : Vol - 2 -Chapter -9- Flooring 0 1541 1541 160.02 246590.82 128.016 0.73
Item Code : 9.34 0 0.00
Item Description : Flooring with 25mm thick polished tandur blue stone slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab, , including cost of materials, labour, curing, polishing complete as per specifications. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
23 Category : Vol - 2 -Chapter -9- Flooring 0 1265 1265 4.5 5692.5 3.6 0.02
Item Code : 9.6.1 0 0.00
Item Description : Providing and laying Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) Light shade pigment using white cement 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
24 Category : Vol - 2 -Chapter -11- Steel and Aluminium Work 0 183 183 495.18 90617.94 396.144 0.27
Item Code : 11.34B 0 0.00
Item Description : Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. 0 0.00
Unit : kg 0 0.00
Rate Analaysis Performed ?: No 0 0.00
25 Category : Vol - 2 -Chapter -11- Steel and Aluminium Work 0 531 531 43.2 22939.2 34.56 0.07
Item Description : Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer- in-charge: Profile E Fixing with adjustable lugs with split end tail to each jamb including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. 0 0.00
Unit : m 0 0.00
Rate Analaysis Performed ?: No 0 0.00
26 Category : Vol - 2 -Chapter -11- Steel and Aluminium Work 0 5221 5221 17.28 90218.88 13.824 0.27
Item Code : 11.4 0 0.00
Item Description : Providing and fixing 1 mm thick M.S. sheet sliding-shutters, with frame and diagonal braces of 40x40x6 mm angle iron, 3 mm M.S. gusset plates at the junctions and corners, 25 mm dia pulley, 40x40x6 mm angle and T- iron guide at the top and bottom respectively, including applying a priming coat of approved steel primer including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
27 Category : Vol - 2 -Chapter -11- Steel and Aluminium Work 0 148 148 207.36 30689.28 165.888 0.09
Item Code : 11.11.1 0 0.00
Item Description : Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. 0 0.00
Unit : kg 0 0.00
Rate Analaysis Performed ?: No 0 0.00
28 Category : Vol - 2 -Chapter -8- Finishing 0 100 100 408.72 40872 326.976 0.12
Item Code : 8.51 0 0.00
Item Description : Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
29 Category : Vol - 2 -Chapter -8- Finishing 0 137 137 408.72 55994.64 326.976 0.17
Item Code : 8.25 0 0.00
Item Description : Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and in- cluding water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
30 Category : Vol - 2 -Chapter -8- Finishing 0 53 53 260.88 13826.64 208.704 0.04
Item Code : 8.27 0 0.00
Item Description : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
31 Category : Vol - 2 -Chapter -8- Finishing 0 89 89 260.88 23218.32 208.704 0.07
Item Code : 8.28 0 0.00
Item Description : Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
32 Category : Vol - 2 -Chapter -8- Finishing 0 50 50 66.78 3339 53.424 0.01
Item Code : 8.34.3 0 0.00
Item Description : Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
33 Category : Vol - 2 -Chapter -8- Finishing 0 115 115 66.78 7679.7 53.424 0.02
Item Code : 8.40 0 0.00
Item Description : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
34 Category : Vol - 2 -Chapter -8- Finishing 0 4 4 2000 8000 1600 0.02
Item Code : 8.49 0 0.00
Item Description : Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : per letter per cm height 0 0.00
Rate Analaysis Performed ?: No 0 0.00
35 Category : Vol - 2 -Chapter -8- Finishing 0 94 94 17.28 1624.32 13.824 0.00
Item Code : 8.43 0 0.00
Item Description : Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade :Two coats on new work including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
36 Category : Vol - 2 -Chapter -13- Water Supply & Plumbing Work 0 291 291 33 9603 26.4 0.03
Item Code : 13.48 0 0.00
Item Description : Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 100 mm diameter 0 0.00
Unit : m 0 0.00
Rate Analaysis Performed ?: No 0 0.00
1 Item Code : Vol 6, Item no-1.2.1 66 60 No --- 3960 48 0.01
Item Name : Concealed Conduit System :Supplying heavy gauge PVC conduit pipe mm dia mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary19/20mm dia 2mm thick 0 0.00
Unit : Mtr 0 0.00
2 Item Code : Vol 6, Item no-1.2.2 78 30 No --- 2340 24 0.01
Item Name : Concealed Conduit System :Supplying heavy gauge PVC conduit pipe . mm dia.mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary25mm dia 2mm thick 0 0.00
Unit : Mtr 0 0.00
3 Item Code : Vol 6, Item no-1.3.1 68 30 No --- 2040 24 0.01
Item Name : Supplying heavy gauge PVC Conduit Pipe.mmthick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary.19/20mm dia 2mm thick 0 0.00
Unit : Mtr 0 0.00
4 Item Code : Vol 6, Item no-1.3.2 79 15 No --- 1185 12 0.00
Item Name : Supplying heavy gauge PVC Conduit Pipe.mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary.25mm dia 2mm thick 0 0.00
Unit : Mtr 0 0.00
5 Item Code : Vol 6, Item no-2.2.1 269 6 No --- 1614 4.8 0.00
Item Name : Point wiring using Copper wire with out switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2 X1.5Sq.mm (Phase&Neutral) &1x1.0 Sqmm(earth Wire)Cable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Short point upto3mtr from tapping point to out let via Switch 0 0.00
Unit : Point 0 0.00
6 Item Code : Vol 6, Item no-2.2.2 379 9 No --- 3411 7.2 0.01
Item Name : Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch 0 0.00
Unit : Point 0 0.00
7 Item Code : Vol 6, Item no-2.2.3 555 12 No --- 6660 9.6 0.02
Item Name : Long point above 6Mtr upto 10Mtr from tapping point to out let via switch box 0 0.00
Unit : Point 0 0.00
8 Item Code : Vol 6, Item no-2.3.2 26 120 No --- 3120 96 0.01
Item Name : Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade,1.5 SQMM multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & confirming to GTP. 0 0.00
Unit : Mtr 0 0.00
9 Item Code : Vol 6, Item no-2.3.3 42 120 No --- 5040 96 0.01
Item Name : Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade,2.5 SQMM multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & confirming to GTP. 0 0.00
Unit : Mtr 0 0.00
10 Item Code : Vol 6, Item no-2.3.4 63 90 No --- 5670 72 0.02
Item Name : Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade,4 SQMM multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & confirming to GTP. 0 0.00
Unit : Mtr 0 0.00
11 Item Code : Vol 6, Item no-3.4.6 319 6 No --- 1914 4.8 0.01
Item Name : Supplying and flush mounting powder coated / galvanized metal box size10-12way suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 0 0.00
Unit : Each 0 0.00
12 Item Code : Vol 6, Item no-3.5.6 344 6 No --- 2064 4.8 0.01
Item Name : Supplying and fixing superior quality 10-12Mudular modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metalbox. 0 0.00
Unit : Each 0 0.00
Item Name : Supplying and fixing of 6Amps 0ne way modular switch on existing modular switch plate as per IS 3854 and IS 1293. 0 0.00
Unit : Each 0 0.00
14 Item Code : Vol 6, Item no-3.6.3 171 9 No --- 1539 7.2 0.00
Item Name : Supplying and fixing of 6Amps 3way modular Socketc on existing modular switch plate as per IS 3854 and IS 1293. 0 0.00
Unit : Each 0 0.00
15 Item Code : Vol 6, Item no-3.6.4 357 6 No --- 2142 4.8 0.01
Item Name : Supplying and fixing of modular stepped electronic fan regulator on existing modular switch plate as per and IS 1293. 0 0.00
Unit : Each 0 0.00
16 Item Code : Vol 6, Item no-5.18.4 739 3 No --- 2217 2.4 0.01
Item Name : Supplying and fixingof 6to32 Amps Double pole miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 0 0.00
Unit : Each 0 0.00
Item Name : Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should be filled with equal proportion of salt and charcoal 150 mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per lSI specification 7.3.3. of IS 732 using 12 mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia 0 0.00
Unit : Each 0 0.00
Item Name : Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system. 48" Sweep (1200mm) Regular model 0 0.00
Unit : Each 0 0.00
Item Name : LED Indoor Supplying of 1x4' feet - LED PVC Square Batten 20/22W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI more than 80. Power Input: 220-240V @ 50Hz & Power factor more than 0.9 along with CE approved drivers. 2 years Warranty against any manufacturing defect working under standard electrical condition 0 0.00
Unit : Each 0 0.00
1 Category : Vol - 1 -Chapter -I- Earth Work --- 95 95 17.68 1679.6 14.144 0.00
Item Code : 1.12 0 0.00
Item Description : Mechanical Means - Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. In all kinds of soils upto 300 mm depth 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
2 Category : Vol - 1 -Chapter -I- Earth Work --- 102 102 55.1 5620.2 44.08 0.02
Item Code : 1.14.1 0 0.00
Item Description : Mechanical Means - Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In all kinds of soils Depth upto 3 m 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
3 Category : Vol - 2 -Chapter -4- Anti-Termite Treatment 0 118 118 58.93 6953.74 47.144 0.02
Item Code : 4.1 0 0.00
Item Description : Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
4 Category : Vol - 1 -Chapter -I- Earth Work --- 2682 2682 1.99 5337.18 1.592 0.02
Item Code : 1.23 0 0.00
Item Description : Mechanical Means - Providing and Filling in foundation with granite / trap broken metal 100mm. and down size & with approved sand including hand packing, ramming, watering, including cost of all materials and labour with all lead and lift complete as per specifications. 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
5 Category : Vol - 1 -Chapter -II- Concrete Works 0 5918 5918 9.94 58824.92 7.952 0.17
Item Code : 2.1.3 0 0.00
Item Description : Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. - Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
6 Category : Vol - 1 -Chapter -II- Concrete Works 0 6227 6725.16 9.01 60593.69 7.208 0.18
Item Code : 2.2.3 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
7 Category : Vol - 1 -Chapter -II- Concrete Works 0 6227 10585.9 0.87 9209.73 0.696 0.03
Item Code : 2.4.3 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
8 Category : Vol - 1 -Chapter -I- Earth Work --- 266 266 30.89 8216.74 24.712 0.02
Item Code : 1.9 0 0.00
Item Description : Manual Means - Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
9 Category : Vol - 1 -Chapter -I- Earth Work --- 474 474 57.53 27269.22 46.024 0.08
Item Code : 1.8 0 0.00
Item Description : Manual Means - Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
10 Category : Vol - 1 -Chapter -II- Concrete Works 0 6327 6327 2.73 17272.71 2.184 0.05
Item Code : 2.4.1 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
11 Category : Vol - 2 -Chapter -5- Stone Masonry Works 0 6364 6364 20.09 127852.76 16.072 0.38
Item Code : 5.4 0 0.00
Item Description : Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
12 Category : Vol - 1 -Chapter -II- Concrete Works 0 6734 11447.8 3.36 38464.61 2.688 0.11
Item Code : 2.5.2 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
13 Category : Vol - 1 -Chapter -II- Concrete Works 0 6734 10101 3.98 40201.98 3.184 0.12
Item Code : 2.5.2 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
14 Category : Vol - 1 -Chapter -II- Concrete Works 0 6734 10774.4 5.42 58397.25 4.336 0.17
Item Code : 2.5.2 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
15 Category : Vol - 1 -Chapter -II- Concrete Works 0 6734 9764.3 0.2 1952.86 0.16 0.01
Item Code : 2.5.2 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
16 Category : Vol - 1 -Chapter -II- Concrete Works 0 6734 10101 7.37 74444.37 5.896 0.22
Item Code : 2.5.2 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
17 Category : Vol - 1 -Chapter -II- Concrete Works 0 80195 80195 2.59 207705.05 2.072 0.61
Item Code : 2.11.a 0 0.00
Item Description : Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Buildings 0 0.00
Unit : t 0 0.00
Rate Analaysis Performed ?: No 0 0.00
18 Category : Vol - 2 -Chapter -6- Masonry Works 0 7948 7948 19.46 154668.08 15.568 0.46
Item Code : 6.8 0 0.00
Item Description : Providing Brick work with common burnt clay Non Modular bricks of clasS designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
19 Category : Vol - 2 -Chapter -6- Masonry Works 0 1029 1029 15.24 15681.96 1.6764 1.34112 0.05
Item Code : 6.15 0 0.00
Item Description : Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
20 Category : Vol - 2 -Chapter -8- Finishing 0 293 293 87.6 25666.8 70.08 0.08
Item Code : 8.2.1 0 0.00
Item Description : Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
21 Category : Vol - 2 -Chapter -8- Finishing 0 369 369 143.73 53036.37 114.984 0.16
Item Code : 8.8 0 0.00
Item Description : Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
22 Category : Vol - 2 -Chapter -9- Flooring 0 1541 1541 53.34 82196.94 42.672 0.24
Item Code : 9.34 0 0.00
Item Description : Flooring with 25mm thick polished tandur blue stone slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab, , including cost of materials, labour, curing, polishing complete as per specifications. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
23 Category : Vol - 2 -Chapter -9- Flooring 0 1265 1265 13.5 17077.5 10.8 0.05
Item Code : 9.6.1 0 0.00
Item Description : Providing and laying Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) Light shade pigment using white cement 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
24 Category : Vol - 2 -Chapter -11- Steel and Aluminium Work 0 183 183 253.26 46346.58 202.608 0.14
Item Code : 11.34B 0 0.00
Item Description : Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. 0 0.00
Unit : kg 0 0.00
Rate Analaysis Performed ?: No 0 0.00
25 Category : Vol - 2 -Chapter -11- Steel and Aluminium Work 0 531 531 14.4 7646.4 11.52 0.02
Item Description : Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer- in-charge: Profile E Fixing with adjustable lugs with split end tail to each jamb including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. 0 0.00
Unit : m 0 0.00
Rate Analaysis Performed ?: No 0 0.00
26 Category : Vol - 2 -Chapter -11- Steel and Aluminium Work 0 5221 5221 5.76 30072.96 4.608 0.09
Item Code : 11.4 0 0.00
Item Description : Providing and fixing 1 mm thick M.S. sheet sliding-shutters, with frame and diagonal braces of 40x40x6 mm angle iron, 3 mm M.S. gusset plates at the junctions and corners, 25 mm dia pulley, 40x40x6 mm angle and T- iron guide at the top and bottom respectively, including applying a priming coat of approved steel primer including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
27 Category : Vol - 2 -Chapter -11- Steel and Aluminium Work 0 148 148 69.12 10229.76 55.296 0.03
Item Code : 11.11.1 0 0.00
Item Description : Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. 0 0.00
Unit : kg 0 0.00
Rate Analaysis Performed ?: No 0 0.00
28 Category : Vol - 2 -Chapter -8- Finishing 0 100 100 165.04 16504 132.032 0.05
Item Code : 8.51 0 0.00
Item Description : Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
29 Category : Vol - 2 -Chapter -8- Finishing 0 137 137 165.04 22610.48 132.032 0.07
Item Code : 8.25 0 0.00
Item Description : Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and in- cluding water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
30 Category : Vol - 2 -Chapter -8- Finishing 0 53 53 143.73 7617.69 114.984 0.02
Item Code : 8.27 0 0.00
Item Description : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
31 Category : Vol - 2 -Chapter -8- Finishing 0 89 89 143.73 12791.97 114.984 0.04
Item Code : 8.28 0 0.00
Item Description : Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
32 Category : Vol - 2 -Chapter -8- Finishing 0 50 50 26.46 1323 21.168 0.00
Item Code : 8.34.3 0 0.00
Item Description : Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
33 Category : Vol - 2 -Chapter -8- Finishing 0 115 115 26.46 3042.9 21.168 0.01
Item Code : 8.40 0 0.00
Item Description : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
34 Category : Vol - 2 -Chapter -8- Finishing 0 4 4 2000 8000 1600 0.02
Item Code : 8.49 0 0.00
Item Description : Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : per letter per cm height 0 0.00
Rate Analaysis Performed ?: No 0 0.00
35 Category : Vol - 2 -Chapter -8- Finishing 0 94 94 5.76 541.44 4.608 0.00
Item Code : 8.43 0 0.00
Item Description : Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade :Two coats on new work including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
36 Category : Vol - 2 -Chapter -13- Water Supply & Plumbing Work 0 291 291 11 3201 8.8 0.01
Item Code : 13.48 0 0.00
Item Description : Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 100 mm diameter 0 0.00
Unit : m 0 0.00
Rate Analaysis Performed ?: No 0 0.00
1 Item Code : Vol 6, Item no-1.2.1 66 20 No --- 1320 16 0.00
Item Name : Concealed Conduit System :Supplying heavy gauge PVC conduit pipe mm dia mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary19/20mm dia 2mm thick 0 0.00
Unit : Mtr 0 0.00
2 Item Code : Vol 6, Item no-1.2.2 78 10 No --- 780 8 0.00
Item Name : Concealed Conduit System :Supplying heavy gauge PVC conduit pipe . mm dia.mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary25mm dia 2mm thick 0 0.00
Unit : Mtr 0 0.00
3 Item Code : Vol 6, Item no-1.3.1 68 10 No --- 680 8 0.00
Item Name : Supplying heavy gauge PVC Conduit Pipe.mmthick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary.19/20mm dia 2mm thick 0 0.00
Unit : Mtr 0 0.00
4 Item Code : Vol 6, Item no-1.3.2 79 5 No --- 395 4 0.00
Item Name : Supplying heavy gauge PVC Conduit Pipe.mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary.25mm dia 2mm thick 0 0.00
Unit : Mtr 0 0.00
5 Item Code : Vol 6, Item no-2.2.1 269 2 No --- 538 1.6 0.00
Item Name : Point wiring using Copper wire with out switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2 X1.5Sq.mm (Phase&Neutral) &1x1.0 Sqmm(earth Wire)Cable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Short point upto3mtr from tapping point to out let via Switch 0 0.00
Unit : Point 0 0.00
6 Item Code : Vol 6, Item no-2.2.2 379 3 No --- 1137 2.4 0.00
Item Name : Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch 0 0.00
Unit : Point 0 0.00
7 Item Code : Vol 6, Item no-2.2.3 555 4 No --- 2220 3.2 0.01
Item Name : Long point above 6Mtr upto 10Mtr from tapping point to out let via switch box 0 0.00
Unit : Point 0 0.00
8 Item Code : Vol 6, Item no-2.3.2 26 40 No --- 1040 32 0.00
Item Name : Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade,1.5 SQMM multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & confirming to GTP. 0 0.00
Unit : Mtr 0 0.00
9 Item Code : Vol 6, Item no-2.3.3 42 40 No --- 1680 32 0.00
Item Name : Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade,2.5 SQMM multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & confirming to GTP. 0 0.00
Unit : Mtr 0 0.00
10 Item Code : Vol 6, Item no-2.3.4 63 30 No --- 1890 24 0.01
Item Name : Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade,4 SQMM multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & confirming to GTP. 0 0.00
Unit : Mtr 0 0.00
11 Item Code : Vol 6, Item no-3.4.6 319 2 No --- 638 1.6 0.00
Item Name : Supplying and flush mounting powder coated / galvanized metal box size10-12way suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 0 0.00
Unit : Each 0 0.00
12 Item Code : Vol 6, Item no-3.5.6 344 2 No --- 688 1.6 0.00
Item Name : Supplying and fixing superior quality 10-12Mudular modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metalbox. 0 0.00
Unit : Each 0 0.00
13 Item Code : Vol 6, Item no-3.6.1 102 8 No --- 816 6.4 0.00
Item Name : Supplying and fixing of 6Amps 0ne way modular switch on existing modular switch plate as per IS 3854 and IS 1293. 0 0.00
Unit : Each 0 0.00
14 Item Code : Vol 6, Item no-3.6.3 171 3 No --- 513 2.4 0.00
Item Name : Supplying and fixing of 6Amps 3way modular Socketc on existing modular switch plate as per IS 3854 and IS 1293. 0 0.00
Unit : Each 0 0.00
15 Item Code : Vol 6, Item no-3.6.4 357 2 No --- 714 1.6 0.00
Item Name : Supplying and fixing of modular stepped electronic fan regulator on existing modular switch plate as per and IS 1293. 0 0.00
Unit : Each 0 0.00
16 Item Code : Vol 6, Item no-5.18.4 739 1 No --- 739 0.8 0.00
Item Name : Supplying and fixingof 6to32 Amps Double pole miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 0 0.00
Unit : Each 0 0.00
17 Item Code : Vol 6, Item no-12.56 3510 1 No --- 3510 0.8 0.01
Item Name : Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should be filled with equal proportion of salt and charcoal 150 mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per lSI specification 7.3.3. of IS 732 using 12 mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia 0 0.00
Unit : Each 0 0.00
18 Item Code : Vol 6, Item no-6.3.1 2984 2 No --- 5968 1.6 0.02
Item Name : Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system. 48" Sweep (1200mm) Regular model 0 0.00
Unit : Each 0 0.00
19 Item Code : Vol 6, Item no-11.3.2 690 6 No --- 4140 4.8 0.01
Item Name : LED Indoor Supplying of 1x4' feet - LED PVC Square Batten 20/22W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI more than 80. Power Input: 220-240V @ 50Hz & Power factor more than 0.9 along with CE approved drivers. 2 years Warranty against any manufacturing defect working under standard electrical condition 0 0.00
Unit : Each 0 0.00
1 Category : Vol - 1 -Chapter -I- Earth Work --- 95 95 51.85 4925.75 41.48 0.01
Item Code : 1.12 0 0.00
Item Description : Mechanical Means - Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. In all kinds of soils upto 300 mm depth 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
2 Category : Vol - 1 -Chapter -I- Earth Work --- 102 102 140.67 14348.34 112.536 0.04
Item Code : 1.14.1 0 0.00
Item Description : Mechanical Means - Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In all kinds of soils Depth upto 3 m 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
3 Category : Vol - 2 -Chapter -4- Anti-Termite Treatment 0 118 118 172.83 20393.94 138.264 0.06
Item Code : 4.1 0 0.00
Item Description : Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
4 Category : Vol - 1 -Chapter -I- Earth Work --- 2682 2682 5.76 15448.32 4.608 0.05
Item Code : 1.23 0 0.00
Item Description : Mechanical Means - Providing and Filling in foundation with granite / trap broken metal 100mm. and down size & with approved sand including hand packing, ramming, watering, including cost of all materials and labour with all lead and lift complete as per specifications. 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
5 Category : Vol - 1 -Chapter -II- Concrete Works 0 5918 5918 29.01 171681.18 23.208 0.51
Item Code : 2.1.3 0 0.00
Item Description : Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. - Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
6 Category : Vol - 1 -Chapter -II- Concrete Works 0 6227 6725.16 25.8 173509.13 20.64 0.51
Item Code : 2.2.3 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
7 Category : Vol - 1 -Chapter -II- Concrete Works 0 6227 10585.9 2.1 22230.39 1.68 0.07
Item Code : 2.4.3 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
8 Category : Vol - 1 -Chapter -I- Earth Work --- 266 266 82.42 21923.72 65.936 0.06
Item Code : 1.9 0 0.00
Item Description : Manual Means - Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
9 Category : Vol - 1 -Chapter -I- Earth Work --- 474 474 142.36 67478.64 113.888 0.20
Item Code : 1.8 0 0.00
Item Description : Manual Means - Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
10 Category : Vol - 1 -Chapter -II- Concrete Works 0 6327 6327 5.66 35810.82 4.528 0.11
Item Code : 2.4.1 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
11 Category : Vol - 2 -Chapter -5- Stone Masonry Works 0 6364 6364 43.45 276515.8 34.76 0.82
Item Code : 5.4 0 0.00
Item Description : Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
12 Category : Vol - 1 -Chapter -II- Concrete Works 0 6734 11447.8 7.82 89521.8 6.256 0.26
Item Code : 2.5.2 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
13 Category : Vol - 1 -Chapter -II- Concrete Works 0 6734 10101 10.38 104848.38 8.304 0.31
Item Code : 2.5.2 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
14 Category : Vol - 1 -Chapter -II- Concrete Works 0 6734 10774.4 13 140067.2 10.4 0.41
Item Code : 2.5.2 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
15 Category : Vol - 1 -Chapter -II- Concrete Works 0 6734 9764.3 0.61 5956.22 0.488 0.02
Item Code : 2.5.2 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
16 Category : Vol - 1 -Chapter -II- Concrete Works 0 6734 10101 21.6 218181.6 17.28 0.65
Item Code : 2.5.2 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
17 Category : Vol - 1 -Chapter -II- Concrete Works 0 80195 80195 6.42 514851.9 5.136 1.52
Item Code : 2.11.a 0 0.00
Item Description : Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Buildings 0 0.00
Unit : t 0 0.00
Rate Analaysis Performed ?: No 0 0.00
18 Category : Vol - 2 -Chapter -6- Masonry Works 0 7948 7948 48.48 385319.04 38.784 1.14
Item Code : 6.8 0 0.00
Item Description : Providing Brick work with common burnt clay Non Modular bricks of clasS designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
19 Category : Vol - 2 -Chapter -6- Masonry Works 0 1029 1029 5.4 5556.6 0.594 0.4752 0.02
Item Code : 6.15 0 0.00
Item Description : Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
20 Category : Vol - 2 -Chapter -8- Finishing 0 293 293 222.48 65186.64 177.984 0.19
Item Code : 8.2.1 0 0.00
Item Description : Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
21 Category : Vol - 2 -Chapter -8- Finishing 0 369 369 260.88 96264.72 208.704 0.28
Item Code : 8.8 0 0.00
Item Description : Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
22 Category : Vol - 2 -Chapter -9- Flooring 0 1541 1541 160.02 246590.82 128.016 0.73
Item Code : 9.34 0 0.00
Item Description : Flooring with 25mm thick polished tandur blue stone slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab, , including cost of materials, labour, curing, polishing complete as per specifications. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
23 Category : Vol - 2 -Chapter -9- Flooring 0 1265 1265 4.5 5692.5 3.6 0.02
Item Code : 9.6.1 0 0.00
Item Description : Providing and laying Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) Light shade pigment using white cement 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
24 Category : Vol - 2 -Chapter -11- Steel and Aluminium Work 0 183 183 495.18 90617.94 396.144 0.27
Item Code : 11.34B 0 0.00
Item Description : Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. 0 0.00
Unit : kg 0 0.00
Rate Analaysis Performed ?: No 0 0.00
25 Category : Vol - 2 -Chapter -11- Steel and Aluminium Work 0 531 531 43.2 22939.2 34.56 0.07
Item Description : Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer- in-charge: Profile E Fixing with adjustable lugs with split end tail to each jamb including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. 0 0.00
Unit : m 0 0.00
Rate Analaysis Performed ?: No 0 0.00
26 Category : Vol - 2 -Chapter -11- Steel and Aluminium Work 0 5221 5221 17.28 90218.88 13.824 0.27
Item Code : 11.4 0 0.00
Item Description : Providing and fixing 1 mm thick M.S. sheet sliding-shutters, with frame and diagonal braces of 40x40x6 mm angle iron, 3 mm M.S. gusset plates at the junctions and corners, 25 mm dia pulley, 40x40x6 mm angle and T- iron guide at the top and bottom respectively, including applying a priming coat of approved steel primer including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
27 Category : Vol - 2 -Chapter -11- Steel and Aluminium Work 0 148 148 207.36 30689.28 165.888 0.09
Item Code : 11.11.1 0 0.00
Item Description : Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. 0 0.00
Unit : kg 0 0.00
Rate Analaysis Performed ?: No 0 0.00
28 Category : Vol - 2 -Chapter -8- Finishing 0 100 100 483.6 48360 386.88 0.14
Item Code : 8.51 0 0.00
Item Description : Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
29 Category : Vol - 2 -Chapter -8- Finishing 0 137 137 483.6 66253.2 386.88 0.20
Item Code : 8.25 0 0.00
Item Description : Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and in- cluding water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
30 Category : Vol - 2 -Chapter -8- Finishing 0 53 53 260.88 13826.64 208.704 0.04
Item Code : 8.27 0 0.00
Item Description : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
31 Category : Vol - 2 -Chapter -8- Finishing 0 89 89 260.88 23218.32 208.704 0.07
Item Code : 8.28 0 0.00
Item Description : Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
32 Category : Vol - 2 -Chapter -8- Finishing 0 50 50 66.78 3339 53.424 0.01
Item Code : 8.34.3 0 0.00
Item Description : Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
33 Category : Vol - 2 -Chapter -8- Finishing 0 115 115 66.78 7679.7 53.424 0.02
Item Code : 8.40 0 0.00
Item Description : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
34 Category : Vol - 2 -Chapter -8- Finishing 0 4 4 2000 8000 1600 0.02
Item Code : 8.49 0 0.00
Item Description : Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : per letter per cm height 0 0.00
Rate Analaysis Performed ?: No 0 0.00
35 Category : Vol - 2 -Chapter -8- Finishing 0 94 94 17.28 1624.32 13.824 0.00
Item Code : 8.43 0 0.00
Item Description : Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade :Two coats on new work including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
36 Category : Vol - 2 -Chapter -13- Water Supply & Plumbing Work 0 291 291 33 9603 26.4 0.03
Item Code : 13.48 0 0.00
Item Description : Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 100 mm diameter 0 0.00
Unit : m 0 0.00
Rate Analaysis Performed ?: No 0 0.00
1 Item Code : Vol 6, Item no-1.2.1 66 60 No --- 3960 48 0.01
Item Name : Concealed Conduit System :Supplying heavy gauge PVC conduit pipe mm dia mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary19/20mm dia 2mm thick 0 0.00
Unit : Mtr 0 0.00
2 Item Code : Vol 6, Item no-1.2.2 78 30 No --- 2340 24 0.01
Item Name : Concealed Conduit System :Supplying heavy gauge PVC conduit pipe . mm dia.mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary25mm dia 2mm thick 0 0.00
Unit : Mtr 0 0.00
3 Item Code : Vol 6, Item no-1.3.1 68 30 No --- 2040 24 0.01
Item Name : Supplying heavy gauge PVC Conduit Pipe.mmthick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary.19/20mm dia 2mm thick 0 0.00
Unit : Mtr 0 0.00
4 Item Code : Vol 6, Item no-1.3.2 79 15 No --- 1185 12 0.00
Item Name : Supplying heavy gauge PVC Conduit Pipe.mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary.25mm dia 2mm thick 0 0.00
Unit : Mtr 0 0.00
5 Item Code : Vol 6, Item no-2.2.1 269 6 No --- 1614 4.8 0.00
Item Name : Point wiring using Copper wire with out switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2 X1.5Sq.mm (Phase&Neutral) &1x1.0 Sqmm(earth Wire)Cable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Short point upto3mtr from tapping point to out let via Switch 0 0.00
Unit : Point 0 0.00
6 Item Code : Vol 6, Item no-2.2.2 379 9 No --- 3411 7.2 0.01
Item Name : Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch 0 0.00
Unit : Point 0 0.00
7 Item Code : Vol 6, Item no-2.2.3 555 12 No --- 6660 9.6 0.02
Item Name : Long point above 6Mtr upto 10Mtr from tapping point to out let via switch box 0 0.00
Unit : Point 0 0.00
8 Item Code : Vol 6, Item no-2.3.2 26 120 No --- 3120 96 0.01
Item Name : Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade,1.5 SQMM multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & confirming to GTP. 0 0.00
Unit : Mtr 0 0.00
9 Item Code : Vol 6, Item no-2.3.3 42 120 No --- 5040 96 0.01
Item Name : Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade,2.5 SQMM multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & confirming to GTP. 0 0.00
Unit : Mtr 0 0.00
10 Item Code : Vol 6, Item no-2.3.4 63 90 No --- 5670 72 0.02
Item Name : Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade,4 SQMM multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & confirming to GTP. 0 0.00
Unit : Mtr 0 0.00
11 Item Code : Vol 6, Item no-3.4.6 319 6 No --- 1914 4.8 0.01
Item Name : Supplying and flush mounting powder coated / galvanized metal box size10-12way suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 0 0.00
Unit : Each 0 0.00
12 Item Code : Vol 6, Item no-3.5.6 344 6 No --- 2064 4.8 0.01
Item Name : Supplying and fixing superior quality 10-12Mudular modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metalbox. 0 0.00
Unit : Each 0 0.00
Item Name : Supplying and fixing of 6Amps 0ne way modular switch on existing modular switch plate as per IS 3854 and IS 1293. 0 0.00
Unit : Each 0 0.00
14 Item Code : Vol 6, Item no-3.6.3 171 9 No --- 1539 7.2 0.00
Item Name : Supplying and fixing of 6Amps 3way modular Socketc on existing modular switch plate as per IS 3854 and IS 1293. 0 0.00
Unit : Each 0 0.00
15 Item Code : Vol 6, Item no-3.6.4 357 6 No --- 2142 4.8 0.01
Item Name : Supplying and fixing of modular stepped electronic fan regulator on existing modular switch plate as per and IS 1293. 0 0.00
Unit : Each 0 0.00
16 Item Code : Vol 6, Item no-5.18.4 739 3 No --- 2217 2.4 0.01
Item Name : Supplying and fixingof 6to32 Amps Double pole miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 0 0.00
Unit : Each 0 0.00
Item Name : Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should be filled with equal proportion of salt and charcoal 150 mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per lSI specification 7.3.3. of IS 732 using 12 mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia 0 0.00
Unit : Each 0 0.00
Item Name : Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system. 48" Sweep (1200mm) Regular model 0 0.00
Unit : Each 0 0.00
Item Name : LED Indoor Supplying of 1x4' feet - LED PVC Square Batten 20/22W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI more than 80. Power Input: 220-240V @ 50Hz & Power factor more than 0.9 along with CE approved drivers. 2 years Warranty against any manufacturing defect working under standard electrical condition 0 0.00
Unit : Each 0 0.00
1 Category : Vol - 1 -Chapter -I- Earth Work --- 95 95 34.76 3302.2 27.808 0.01
Item Code : 1.12 0 0.00
Item Description : Mechanical Means - Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. In all kinds of soils upto 300 mm depth 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
2 Category : Vol - 1 -Chapter -I- Earth Work --- 102 102 82.75 8440.5 66.2 0.02
Item Code : 1.14.1 0 0.00
Item Description : Mechanical Means - Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In all kinds of soils Depth upto 3 m 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
3 Category : Vol - 2 -Chapter -4- Anti-Termite Treatment 0 118 118 115.88 13673.84 92.704 0.04
Item Code : 4.1 0 0.00
Item Description : Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
4 Category : Vol - 1 -Chapter -I- Earth Work --- 2682 2682 5.12 13731.84 4.096 0.04
Item Code : 1.23 0 0.00
Item Description : Mechanical Means - Providing and Filling in foundation with granite / trap broken metal 100mm. and down size & with approved sand including hand packing, ramming, watering, including cost of all materials and labour with all lead and lift complete as per specifications. 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
5 Category : Vol - 1 -Chapter -II- Concrete Works 0 5918 5918 21.4 126645.2 17.12 0.37
Item Code : 2.1.3 0 0.00
Item Description : Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. - Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
6 Category : Vol - 1 -Chapter -II- Concrete Works 0 6227 6725.16 17.95 120716.62 14.36 0.36
Item Code : 2.2.3 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
7 Category : Vol - 1 -Chapter -II- Concrete Works 0 6227 10585.9 1.12 11856.21 0.896 0.04
Item Code : 2.4.3 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
8 Category : Vol - 1 -Chapter -I- Earth Work --- 266 266 35.84 9533.44 28.672 0.03
Item Code : 1.9 0 0.00
Item Description : Manual Means - Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
9 Category : Vol - 1 -Chapter -I- Earth Work --- 474 474 96.86 45911.64 77.488 0.14
Item Code : 1.8 0 0.00
Item Description : Manual Means - Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
10 Category : Vol - 1 -Chapter -II- Concrete Works 0 6327 6327 4.42 27965.34 3.536 0.08
Item Code : 2.4.1 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
11 Category : Vol - 2 -Chapter -5- Stone Masonry Works 0 6364 6364 36.09 229676.76 28.872 0.68
Item Code : 5.4 0 0.00
Item Description : Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
12 Category : Vol - 1 -Chapter -II- Concrete Works 0 6734 11447.8 5.6 64107.68 4.48 0.19
Item Code : 2.5.2 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
13 Category : Vol - 1 -Chapter -II- Concrete Works 0 6734 10101 7.18 72525.18 5.744 0.21
Item Code : 2.5.2 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
14 Category : Vol - 1 -Chapter -II- Concrete Works 0 6734 10774.4 9.69 104403.94 7.752 0.31
Item Code : 2.5.2 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
15 Category : Vol - 1 -Chapter -II- Concrete Works 0 6734 9764.3 0.41 4003.36 0.328 0.01
Item Code : 2.5.2 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
16 Category : Vol - 1 -Chapter -II- Concrete Works 0 6734 10101 14.48 146262.48 11.584 0.43
Item Code : 2.5.2 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
17 Category : Vol - 1 -Chapter -II- Concrete Works 0 80195 80195 4.7 376916.5 3.76 1.12
Item Code : 2.11.a 0 0.00
Item Description : Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Buildings 0 0.00
Unit : t 0 0.00
Rate Analaysis Performed ?: No 0 0.00
18 Category : Vol - 2 -Chapter -6- Masonry Works 0 7948 7948 36.52 290260.96 29.216 0.86
Item Code : 6.8 0 0.00
Item Description : Providing Brick work with common burnt clay Non Modular bricks of clasS designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
19 Category : Vol - 2 -Chapter -6- Masonry Works 0 1029 1029 24.72 25436.88 2.7192 2.17536 0.08
Item Code : 6.15 0 0.00
Item Description : Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
20 Category : Vol - 2 -Chapter -8- Finishing 0 293 293 149.64 43844.52 119.712 0.13
Item Code : 8.2.1 0 0.00
Item Description : Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
21 Category : Vol - 2 -Chapter -8- Finishing 0 369 369 219.12 80855.28 175.296 0.24
Item Code : 8.8 0 0.00
Item Description : Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
22 Category : Vol - 2 -Chapter -9- Flooring 0 1541 1541 106.68 164393.88 85.344 0.49
Item Code : 9.34 0 0.00
Item Description : Flooring with 25mm thick polished tandur blue stone slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab, , including cost of materials, labour, curing, polishing complete as per specifications. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
23 Category : Vol - 2 -Chapter -9- Flooring 0 1265 1265 14.25 18026.25 11.4 0.05
Item Code : 9.6.1 0 0.00
Item Description : Providing and laying Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) Light shade pigment using white cement 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
24 Category : Vol - 2 -Chapter -11- Steel and Aluminium Work 0 183 183 487.62 89234.46 390.096 0.26
Item Code : 11.34B 0 0.00
Item Description : Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. 0 0.00
Unit : kg 0 0.00
Rate Analaysis Performed ?: No 0 0.00
25 Category : Vol - 2 -Chapter -11- Steel and Aluminium Work 0 531 531 28.8 15292.8 23.04 0.05
Item Description : Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer- in-charge: Profile E Fixing with adjustable lugs with split end tail to each jamb including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. 0 0.00
Unit : m 0 0.00
Rate Analaysis Performed ?: No 0 0.00
26 Category : Vol - 2 -Chapter -11- Steel and Aluminium Work 0 5221 5221 11.52 60145.92 9.216 0.18
Item Code : 11.4 0 0.00
Item Description : Providing and fixing 1 mm thick M.S. sheet sliding-shutters, with frame and diagonal braces of 40x40x6 mm angle iron, 3 mm M.S. gusset plates at the junctions and corners, 25 mm dia pulley, 40x40x6 mm angle and T- iron guide at the top and bottom respectively, including applying a priming coat of approved steel primer including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
27 Category : Vol - 2 -Chapter -11- Steel and Aluminium Work 0 148 148 172.8 25574.4 138.24 0.08
Item Code : 11.11.1 0 0.00
Item Description : Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. 0 0.00
Unit : kg 0 0.00
Rate Analaysis Performed ?: No 0 0.00
28 Category : Vol - 2 -Chapter -8- Finishing 0 100 100 293.6 29360 234.88 0.09
Item Code : 8.51 0 0.00
Item Description : Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
29 Category : Vol - 2 -Chapter -8- Finishing 0 137 137 293.6 40223.2 234.88 0.12
Item Code : 8.25 0 0.00
Item Description : Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and in- cluding water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
30 Category : Vol - 2 -Chapter -8- Finishing 0 53 53 219.12 11613.36 175.296 0.03
Item Code : 8.27 0 0.00
Item Description : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
31 Category : Vol - 2 -Chapter -8- Finishing 0 89 89 219.12 19501.68 175.296 0.06
Item Code : 8.28 0 0.00
Item Description : Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
32 Category : Vol - 2 -Chapter -8- Finishing 0 50 50 52.02 2601 41.616 0.01
Item Code : 8.34.3 0 0.00
Item Description : Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
33 Category : Vol - 2 -Chapter -8- Finishing 0 115 115 52.02 5982.3 41.616 0.02
Item Code : 8.40 0 0.00
Item Description : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
34 Category : Vol - 2 -Chapter -8- Finishing 0 4 4 2000 8000 1600 0.02
Item Code : 8.49 0 0.00
Item Description : Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : per letter per cm height 0 0.00
Rate Analaysis Performed ?: No 0 0.00
35 Category : Vol - 2 -Chapter -8- Finishing 0 94 94 11.52 1082.88 9.216 0.00
Item Code : 8.43 0 0.00
Item Description : Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade :Two coats on new work including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
36 Category : Vol - 2 -Chapter -13- Water Supply & Plumbing Work 0 291 291 11 3201 8.8 0.01
Item Code : 13.48 0 0.00
Item Description : Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 100 mm diameter 0 0.00
Unit : m 0 0.00
Rate Analaysis Performed ?: No 0 0.00
1 Item Code : Vol 6, Item no-1.2.1 66 40 No --- 2640 32 0.01
Item Name : Concealed Conduit System :Supplying heavy gauge PVC conduit pipe mm dia mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary19/20mm dia 2mm thick 0 0.00
Unit : Mtr 0 0.00
2 Item Code : Vol 6, Item no-1.2.2 78 20 No --- 1560 16 0.00
Item Name : Concealed Conduit System :Supplying heavy gauge PVC conduit pipe . mm dia.mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary25mm dia 2mm thick 0 0.00
Unit : Mtr 0 0.00
3 Item Code : Vol 6, Item no-1.3.1 68 20 No --- 1360 16 0.00
Item Name : Supplying heavy gauge PVC Conduit Pipe.mmthick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary.19/20mm dia 2mm thick 0 0.00
Unit : Mtr 0 0.00
4 Item Code : Vol 6, Item no-1.3.2 79 10 No --- 790 8 0.00
Item Name : Supplying heavy gauge PVC Conduit Pipe.mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary.25mm dia 2mm thick 0 0.00
Unit : Mtr 0 0.00
5 Item Code : Vol 6, Item no-2.2.1 269 4 No --- 1076 3.2 0.00
Item Name : Point wiring using Copper wire with out switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2 X1.5Sq.mm (Phase&Neutral) &1x1.0 Sqmm(earth Wire)Cable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Short point upto3mtr from tapping point to out let via Switch 0 0.00
Unit : Point 0 0.00
6 Item Code : Vol 6, Item no-2.2.2 379 6 No --- 2274 4.8 0.01
Item Name : Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch 0 0.00
Unit : Point 0 0.00
7 Item Code : Vol 6, Item no-2.2.3 555 8 No --- 4440 6.4 0.01
Item Name : Long point above 6Mtr upto 10Mtr from tapping point to out let via switch box 0 0.00
Unit : Point 0 0.00
8 Item Code : Vol 6, Item no-2.3.2 26 80 No --- 2080 64 0.01
Item Name : Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade,1.5 SQMM multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & confirming to GTP. 0 0.00
Unit : Mtr 0 0.00
9 Item Code : Vol 6, Item no-2.3.3 42 80 No --- 3360 64 0.01
Item Name : Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade,2.5 SQMM multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & confirming to GTP. 0 0.00
Unit : Mtr 0 0.00
10 Item Code : Vol 6, Item no-2.3.4 63 60 No --- 3780 48 0.01
Item Name : Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade,4 SQMM multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & confirming to GTP. 0 0.00
Unit : Mtr 0 0.00
11 Item Code : Vol 6, Item no-3.4.6 319 4 No --- 1276 3.2 0.00
Item Name : Supplying and flush mounting powder coated / galvanized metal box size10-12way suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 0 0.00
Unit : Each 0 0.00
12 Item Code : Vol 6, Item no-3.5.6 344 4 No --- 1376 3.2 0.00
Item Name : Supplying and fixing superior quality 10-12Mudular modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metalbox. 0 0.00
Unit : Each 0 0.00
Item Name : Supplying and fixing of 6Amps 0ne way modular switch on existing modular switch plate as per IS 3854 and IS 1293. 0 0.00
Unit : Each 0 0.00
14 Item Code : Vol 6, Item no-3.6.3 171 6 No --- 1026 4.8 0.00
Item Name : Supplying and fixing of 6Amps 3way modular Socketc on existing modular switch plate as per IS 3854 and IS 1293. 0 0.00
Unit : Each 0 0.00
15 Item Code : Vol 6, Item no-3.6.4 357 4 No --- 1428 3.2 0.00
Item Name : Supplying and fixing of modular stepped electronic fan regulator on existing modular switch plate as per and IS 1293. 0 0.00
Unit : Each 0 0.00
16 Item Code : Vol 6, Item no-5.18.4 739 2 No --- 1478 1.6 0.00
Item Name : Supplying and fixingof 6to32 Amps Double pole miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 0 0.00
Unit : Each 0 0.00
17 Item Code : Vol 6, Item no-12.56 3510 2 No --- 7020 1.6 0.02
Item Name : Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should be filled with equal proportion of salt and charcoal 150 mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per lSI specification 7.3.3. of IS 732 using 12 mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia 0 0.00
Unit : Each 0 0.00
Item Name : Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system. 48" Sweep (1200mm) Regular model 0 0.00
Unit : Each 0 0.00
Item Name : LED Indoor Supplying of 1x4' feet - LED PVC Square Batten 20/22W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI more than 80. Power Input: 220-240V @ 50Hz & Power factor more than 0.9 along with CE approved drivers. 2 years Warranty against any manufacturing defect working under standard electrical condition 0 0.00
Unit : Each 0 0.00
1 Category : Vol - 1 -Chapter -I- Earth Work --- 95 95 17.68 1679.6 14.144 0.00
Item Code : 1.12 0 0.00
Item Description : Mechanical Means - Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. In all kinds of soils upto 300 mm depth 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
2 Category : Vol - 1 -Chapter -I- Earth Work --- 102 102 45.36 4626.72 36.288 0.01
Item Code : 1.14.1 0 0.00
Item Description : Mechanical Means - Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In all kinds of soils Depth upto 3 m 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
3 Category : Vol - 2 -Chapter -4- Anti-Termite Treatment 0 118 118 58.93 6953.74 47.144 0.02
Item Code : 4.1 0 0.00
Item Description : Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
4 Category : Vol - 1 -Chapter -I- Earth Work --- 2682 2682 2.21 5927.22 1.768 0.02
Item Code : 1.23 0 0.00
Item Description : Mechanical Means - Providing and Filling in foundation with granite / trap broken metal 100mm. and down size & with approved sand including hand packing, ramming, watering, including cost of all materials and labour with all lead and lift complete as per specifications. 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
5 Category : Vol - 1 -Chapter -II- Concrete Works 0 5918 5918 8.45 50007.1 6.76 0.15
Item Code : 2.1.3 0 0.00
Item Description : Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. - Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
6 Category : Vol - 1 -Chapter -II- Concrete Works 0 6227 6725.16 10.18 68462.13 8.144 0.20
Item Code : 2.2.3 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
7 Category : Vol - 1 -Chapter -II- Concrete Works 0 6227 10585.9 0.67 7092.55 0.536 0.02
Item Code : 2.4.3 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
8 Category : Vol - 1 -Chapter -I- Earth Work --- 266 266 28.39 7551.74 22.712 0.02
Item Code : 1.9 0 0.00
Item Description : Manual Means - Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
9 Category : Vol - 1 -Chapter -I- Earth Work --- 474 474 57.53 27269.22 46.024 0.08
Item Code : 1.8 0 0.00
Item Description : Manual Means - Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
10 Category : Vol - 1 -Chapter -II- Concrete Works 0 6327 6327 2.73 17272.71 2.184 0.05
Item Code : 2.4.1 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
11 Category : Vol - 2 -Chapter -5- Stone Masonry Works 0 6364 6364 13.13 83559.32 10.504 0.25
Item Code : 5.4 0 0.00
Item Description : Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
12 Category : Vol - 1 -Chapter -II- Concrete Works 0 6734 11447.8 3.36 38464.61 2.688 0.11
Item Code : 2.5.2 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
13 Category : Vol - 1 -Chapter -II- Concrete Works 0 6734 10101 3.98 40201.98 3.184 0.12
Item Code : 2.5.2 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
14 Category : Vol - 1 -Chapter -II- Concrete Works 0 6734 10774.4 4.98 53656.51 3.984 0.16
Item Code : 2.5.2 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
15 Category : Vol - 1 -Chapter -II- Concrete Works 0 6734 9764.3 0.2 1952.86 0.16 0.01
Item Code : 2.5.2 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
16 Category : Vol - 1 -Chapter -II- Concrete Works 0 6734 10101 7.37 74444.37 5.896 0.22
Item Code : 2.5.2 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
17 Category : Vol - 1 -Chapter -II- Concrete Works 0 80195 80195 2.58 206903.1 2.064 0.61
Item Code : 2.11.a 0 0.00
Item Description : Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Buildings 0 0.00
Unit : t 0 0.00
Rate Analaysis Performed ?: No 0 0.00
18 Category : Vol - 2 -Chapter -6- Masonry Works 0 7948 7948 19.46 154668.08 15.568 0.46
Item Code : 6.8 0 0.00
Item Description : Providing Brick work with common burnt clay Non Modular bricks of clasS designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
19 Category : Vol - 2 -Chapter -6- Masonry Works 0 1029 1029 1.8 1852.2 0.198 0.1584 0.01
Item Code : 6.15 0 0.00
Item Description : Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
20 Category : Vol - 2 -Chapter -8- Finishing 0 293 293 74.16 21728.88 59.328 0.06
Item Code : 8.2.1 0 0.00
Item Description : Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
21 Category : Vol - 2 -Chapter -8- Finishing 0 369 369 122.59 45235.71 98.072 0.13
Item Code : 8.8 0 0.00
Item Description : Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
22 Category : Vol - 2 -Chapter -9- Flooring 0 1541 1541 53.34 82196.94 42.672 0.24
Item Code : 9.34 0 0.00
Item Description : Flooring with 25mm thick polished tandur blue stone slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab, , including cost of materials, labour, curing, polishing complete as per specifications. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
23 Category : Vol - 2 -Chapter -11- Steel and Aluminium Work 0 183 183 215.46 39429.18 172.368 0.12
Item Code : 11.34B 0 0.00
Item Description : Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. 0 0.00
Unit : kg 0 0.00
Rate Analaysis Performed ?: No 0 0.00
24 Category : Vol - 2 -Chapter -11- Steel and Aluminium Work 0 531 531 14.4 7646.4 11.52 0.02
Item Description : Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer- in-charge: Profile E Fixing with adjustable lugs with split end tail to each jamb including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. 0 0.00
Unit : m 0 0.00
Rate Analaysis Performed ?: No 0 0.00
25 Category : Vol - 2 -Chapter -11- Steel and Aluminium Work 0 5221 5221 5.76 30072.96 4.608 0.09
Item Code : 11.4 0 0.00
Item Description : Providing and fixing 1 mm thick M.S. sheet sliding-shutters, with frame and diagonal braces of 40x40x6 mm angle iron, 3 mm M.S. gusset plates at the junctions and corners, 25 mm dia pulley, 40x40x6 mm angle and T- iron guide at the top and bottom respectively, including applying a priming coat of approved steel primer including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
26 Category : Vol - 2 -Chapter -11- Steel and Aluminium Work 0 148 148 69.12 10229.76 55.296 0.03
Item Code : 11.11.1 0 0.00
Item Description : Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. 0 0.00
Unit : kg 0 0.00
Rate Analaysis Performed ?: No 0 0.00
27 Category : Vol - 2 -Chapter -8- Finishing 0 100 100 136.24 13624 108.992 0.04
Item Code : 8.51 0 0.00
Item Description : Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
28 Category : Vol - 2 -Chapter -8- Finishing 0 137 137 136.24 18664.88 108.992 0.06
Item Code : 8.25 0 0.00
Item Description : Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and in- cluding water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
29 Category : Vol - 2 -Chapter -8- Finishing 0 53 53 122.6 6497.8 98.08 0.02
Item Code : 8.27 0 0.00
Item Description : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
30 Category : Vol - 2 -Chapter -8- Finishing 0 89 89 122.6 10911.4 98.08 0.03
Item Code : 8.28 0 0.00
Item Description : Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
31 Category : Vol - 2 -Chapter -8- Finishing 0 50 50 26.46 1323 21.168 0.00
Item Code : 8.34.3 0 0.00
Item Description : Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
32 Category : Vol - 2 -Chapter -8- Finishing 0 115 115 26.46 3042.9 21.168 0.01
Item Code : 8.40 0 0.00
Item Description : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
33 Category : Vol - 2 -Chapter -8- Finishing 0 4 4 2000 8000 1600 0.02
Item Code : 8.49 0 0.00
Item Description : Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : per letter per cm height 0 0.00
Rate Analaysis Performed ?: No 0 0.00
34 Category : Vol - 2 -Chapter -8- Finishing 0 94 94 5.76 541.44 4.608 0.00
Item Code : 8.43 0 0.00
Item Description : Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade :Two coats on new work including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
35 Category : Vol - 2 -Chapter -13- Water Supply & Plumbing Work 0 291 291 11 3201 8.8 0.01
Item Code : 13.48 0 0.00
Item Description : Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 100 mm diameter 0 0.00
Unit : m 0 0.00
Rate Analaysis Performed ?: No 0 0.00
1 Item Code : Vol 6, Item no-1.2.1 66 20 No --- 1320 16 0.00
Item Name : Concealed Conduit System :Supplying heavy gauge PVC conduit pipe mm dia mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary19/20mm dia 2mm thick 0 0.00
Unit : Mtr 0 0.00
2 Item Code : Vol 6, Item no-1.2.2 78 10 No --- 780 8 0.00
Item Name : Concealed Conduit System :Supplying heavy gauge PVC conduit pipe . mm dia.mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary25mm dia 2mm thick 0 0.00
Unit : Mtr 0 0.00
3 Item Code : Vol 6, Item no-1.3.1 68 10 No --- 680 8 0.00
Item Name : Supplying heavy gauge PVC Conduit Pipe.mmthick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary.19/20mm dia 2mm thick 0 0.00
Unit : Mtr 0 0.00
4 Item Code : Vol 6, Item no-1.3.2 79 5 No --- 395 4 0.00
Item Name : Supplying heavy gauge PVC Conduit Pipe.mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary.25mm dia 2mm thick 0 0.00
Unit : Mtr 0 0.00
5 Item Code : Vol 6, Item no-2.2.1 269 2 No --- 538 1.6 0.00
Item Name : Point wiring using Copper wire with out switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2 X1.5Sq.mm (Phase&Neutral) &1x1.0 Sqmm(earth Wire)Cable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Short point upto3mtr from tapping point to out let via Switch 0 0.00
Unit : Point 0 0.00
6 Item Code : Vol 6, Item no-2.2.2 379 3 No --- 1137 2.4 0.00
Item Name : Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch 0 0.00
Unit : Point 0 0.00
7 Item Code : Vol 6, Item no-2.2.3 555 4 No --- 2220 3.2 0.01
Item Name : Long point above 6Mtr upto 10Mtr from tapping point to out let via switch box 0 0.00
Unit : Point 0 0.00
8 Item Code : Vol 6, Item no-2.3.2 26 40 No --- 1040 32 0.00
Item Name : Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade,1.5 SQMM multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & confirming to GTP. 0 0.00
Unit : Mtr 0 0.00
9 Item Code : Vol 6, Item no-2.3.3 42 40 No --- 1680 32 0.00
Item Name : Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade,2.5 SQMM multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & confirming to GTP. 0 0.00
Unit : Mtr 0 0.00
10 Item Code : Vol 6, Item no-2.3.4 63 30 No --- 1890 24 0.01
Item Name : Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade,4 SQMM multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & confirming to GTP. 0 0.00
Unit : Mtr 0 0.00
11 Item Code : Vol 6, Item no-3.4.6 319 2 No --- 638 1.6 0.00
Item Name : Supplying and flush mounting powder coated / galvanized metal box size10-12way suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 0 0.00
Unit : Each 0 0.00
12 Item Code : Vol 6, Item no-3.5.6 344 2 No --- 688 1.6 0.00
Item Name : Supplying and fixing superior quality 10-12Mudular modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metalbox. 0 0.00
Unit : Each 0 0.00
13 Item Code : Vol 6, Item no-3.6.1 102 8 No --- 816 6.4 0.00
Item Name : Supplying and fixing of 6Amps 0ne way modular switch on existing modular switch plate as per IS 3854 and IS 1293. 0 0.00
Unit : Each 0 0.00
14 Item Code : Vol 6, Item no-3.6.3 171 3 No --- 513 2.4 0.00
Item Name : Supplying and fixing of 6Amps 3way modular Socketc on existing modular switch plate as per IS 3854 and IS 1293. 0 0.00
Unit : Each 0 0.00
15 Item Code : Vol 6, Item no-3.6.4 357 2 No --- 714 1.6 0.00
Item Name : Supplying and fixing of modular stepped electronic fan regulator on existing modular switch plate as per and IS 1293. 0 0.00
Unit : Each 0 0.00
16 Item Code : Vol 6, Item no-5.18.4 739 1 No --- 739 0.8 0.00
Item Name : Supplying and fixingof 6to32 Amps Double pole miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 0 0.00
Unit : Each 0 0.00
17 Item Code : Vol 6, Item no-12.56 3510 1 No --- 3510 0.8 0.01
Item Name : Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should be filled with equal proportion of salt and charcoal 150 mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per lSI specification 7.3.3. of IS 732 using 12 mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia 0 0.00
Unit : Each 0 0.00
18 Item Code : Vol 6, Item no-6.3.1 2984 2 No --- 5968 1.6 0.02
Item Name : Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system. 48" Sweep (1200mm) Regular model 0 0.00
Unit : Each 0 0.00
19 Item Code : Vol 6, Item no-11.3.2 690 6 No --- 4140 4.8 0.01
Item Name : LED Indoor Supplying of 1x4' feet - LED PVC Square Batten 20/22W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI more than 80. Power Input: 220-240V @ 50Hz & Power factor more than 0.9 along with CE approved drivers. 2 years Warranty against any manufacturing defect working under standard electrical condition 0 0.00
Unit : Each 0 0.00
1 Category : Vol - 1 -Chapter -I- Earth Work --- 95 95 34.76 3302.2 27.808 0.01
Item Code : 1.12 0 0.00
Item Description : Mechanical Means - Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. In all kinds of soils upto 300 mm depth 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
2 Category : Vol - 1 -Chapter -I- Earth Work --- 102 102 99.64 10163.28 79.712 0.03
Item Code : 1.14.1 0 0.00
Item Description : Mechanical Means - Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In all kinds of soils Depth upto 3 m 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
3 Category : Vol - 2 -Chapter -4- Anti-Termite Treatment 0 118 118 115.88 13673.84 92.704 0.04
Item Code : 4.1 0 0.00
Item Description : Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
4 Category : Vol - 1 -Chapter -I- Earth Work --- 2682 2682 5.2 13946.4 4.16 0.04
Item Code : 1.23 0 0.00
Item Description : Mechanical Means - Providing and Filling in foundation with granite / trap broken metal 100mm. and down size & with approved sand including hand packing, ramming, watering, including cost of all materials and labour with all lead and lift complete as per specifications. 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
5 Category : Vol - 1 -Chapter -II- Concrete Works 0 5918 5918 21.48 127118.64 17.184 0.38
Item Code : 2.1.3 0 0.00
Item Description : Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. - Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
6 Category : Vol - 1 -Chapter -II- Concrete Works 0 6227 6725.16 18.29 123003.18 14.632 0.36
Item Code : 2.2.3 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
7 Category : Vol - 1 -Chapter -II- Concrete Works 0 6227 10585.9 1.51 15984.71 1.208 0.05
Item Code : 2.4.3 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
8 Category : Vol - 1 -Chapter -I- Earth Work --- 266 266 57.01 15164.66 45.608 0.04
Item Code : 1.9 0 0.00
Item Description : Manual Means - Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
9 Category : Vol - 1 -Chapter -I- Earth Work --- 474 474 96.86 45911.64 77.488 0.14
Item Code : 1.8 0 0.00
Item Description : Manual Means - Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
10 Category : Vol - 1 -Chapter -II- Concrete Works 0 6327 6327 4.42 27965.34 3.536 0.08
Item Code : 2.4.1 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
11 Category : Vol - 2 -Chapter -5- Stone Masonry Works 0 6364 6364 30.32 192956.48 24.256 0.57
Item Code : 5.4 0 0.00
Item Description : Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
12 Category : Vol - 1 -Chapter -II- Concrete Works 0 6734 11447.8 5.6 64107.68 4.48 0.19
Item Code : 2.5.2 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
13 Category : Vol - 1 -Chapter -II- Concrete Works 0 6734 10101 7.18 72525.18 5.744 0.21
Item Code : 2.5.2 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
14 Category : Vol - 1 -Chapter -II- Concrete Works 0 6734 10774.4 9.69 104403.94 7.752 0.31
Item Code : 2.5.2 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
15 Category : Vol - 1 -Chapter -II- Concrete Works 0 6734 9764.3 0.41 4003.36 0.328 0.01
Item Code : 2.5.2 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
16 Category : Vol - 1 -Chapter -II- Concrete Works 0 6734 10101 14.48 146262.48 11.584 0.43
Item Code : 2.5.2 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
17 Category : Vol - 1 -Chapter -II- Concrete Works 0 80195 80195 4.68 375312.6 3.744 1.11
Item Code : 2.11.a 0 0.00
Item Description : Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Buildings 0 0.00
Unit : t 0 0.00
Rate Analaysis Performed ?: No 0 0.00
18 Category : Vol - 2 -Chapter -6- Masonry Works 0 7948 7948 36.52 290260.96 29.216 0.86
Item Code : 6.8 0 0.00
Item Description : Providing Brick work with common burnt clay Non Modular bricks of clasS designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
19 Category : Vol - 2 -Chapter -6- Masonry Works 0 1029 1029 24.72 25436.88 2.7192 2.17536 0.08
Item Code : 6.15 0 0.00
Item Description : Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
20 Category : Vol - 2 -Chapter -8- Finishing 0 293 293 149.64 43844.52 119.712 0.13
Item Code : 8.2.1 0 0.00
Item Description : Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
21 Category : Vol - 2 -Chapter -8- Finishing 0 369 369 219.12 80855.28 175.296 0.24
Item Code : 8.8 0 0.00
Item Description : Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
22 Category : Vol - 2 -Chapter -9- Flooring 0 1541 1541 106.68 164393.88 85.344 0.49
Item Code : 9.34 0 0.00
Item Description : Flooring with 25mm thick polished tandur blue stone slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab, , including cost of materials, labour, curing, polishing complete as per specifications. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
23 Category : Vol - 2 -Chapter -9- Flooring 0 1265 1265 4.5 5692.5 3.6 0.02
Item Code : 9.6.1 0 0.00
Item Description : Providing and laying Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) Light shade pigment using white cement 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
24 Category : Vol - 2 -Chapter -11- Steel and Aluminium Work 0 183 183 487.62 89234.46 390.096 0.26
Item Code : 11.34B 0 0.00
Item Description : Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. 0 0.00
Unit : kg 0 0.00
Rate Analaysis Performed ?: No 0 0.00
25 Category : Vol - 2 -Chapter -11- Steel and Aluminium Work 0 531 531 28.8 15292.8 23.04 0.05
Item Description : Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer- in-charge: Profile E Fixing with adjustable lugs with split end tail to each jamb including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. 0 0.00
Unit : m 0 0.00
Rate Analaysis Performed ?: No 0 0.00
26 Category : Vol - 2 -Chapter -11- Steel and Aluminium Work 0 5221 5221 11.52 60145.92 9.216 0.18
Item Code : 11.4 0 0.00
Item Description : Providing and fixing 1 mm thick M.S. sheet sliding-shutters, with frame and diagonal braces of 40x40x6 mm angle iron, 3 mm M.S. gusset plates at the junctions and corners, 25 mm dia pulley, 40x40x6 mm angle and T- iron guide at the top and bottom respectively, including applying a priming coat of approved steel primer including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
27 Category : Vol - 2 -Chapter -11- Steel and Aluminium Work 0 148 148 138.24 20459.52 110.592 0.06
Item Code : 11.11.1 0 0.00
Item Description : Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. 0 0.00
Unit : kg 0 0.00
Rate Analaysis Performed ?: No 0 0.00
28 Category : Vol - 2 -Chapter -8- Finishing 0 100 100 293.6 29360 234.88 0.09
Item Code : 8.51 0 0.00
Item Description : Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
29 Category : Vol - 2 -Chapter -8- Finishing 0 137 137 293.6 40223.2 234.88 0.12
Item Code : 8.25 0 0.00
Item Description : Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and in- cluding water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
30 Category : Vol - 2 -Chapter -8- Finishing 0 53 53 219.12 11613.36 175.296 0.03
Item Code : 8.27 0 0.00
Item Description : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
31 Category : Vol - 2 -Chapter -8- Finishing 0 89 89 219.12 19501.68 175.296 0.06
Item Code : 8.28 0 0.00
Item Description : Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
32 Category : Vol - 2 -Chapter -8- Finishing 0 50 50 52.02 2601 41.616 0.01
Item Code : 8.34.3 0 0.00
Item Description : Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
33 Category : Vol - 2 -Chapter -8- Finishing 0 115 115 52.02 5982.3 41.616 0.02
Item Code : 8.40 0 0.00
Item Description : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
34 Category : Vol - 2 -Chapter -8- Finishing 0 4 4 2000 8000 1600 0.02
Item Code : 8.49 0 0.00
Item Description : Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : per letter per cm height 0 0.00
Rate Analaysis Performed ?: No 0 0.00
35 Category : Vol - 2 -Chapter -8- Finishing 0 94 94 11.52 1082.88 9.216 0.00
Item Code : 8.43 0 0.00
Item Description : Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade :Two coats on new work including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
36 Category : Vol - 2 -Chapter -13- Water Supply & Plumbing Work 0 291 291 11 3201 8.8 0.01
Item Code : 13.48 0 0.00
Item Description : Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 100 mm diameter 0 0.00
Unit : m 0 0.00
Rate Analaysis Performed ?: No 0 0.00
1 Item Code : Vol 6, Item no-1.2.1 66 40 No --- 2640 32 0.01
Item Name : Concealed Conduit System :Supplying heavy gauge PVC conduit pipe mm dia mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary19/20mm dia 2mm thick 0 0.00
Unit : Mtr 0 0.00
2 Item Code : Vol 6, Item no-1.2.2 78 20 No --- 1560 16 0.00
Item Name : Concealed Conduit System :Supplying heavy gauge PVC conduit pipe . mm dia.mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary25mm dia 2mm thick 0 0.00
Unit : Mtr 0 0.00
3 Item Code : Vol 6, Item no-1.3.1 68 20 No --- 1360 16 0.00
Item Name : Supplying heavy gauge PVC Conduit Pipe.mmthick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary.19/20mm dia 2mm thick 0 0.00
Unit : Mtr 0 0.00
4 Item Code : Vol 6, Item no-1.3.2 79 10 No --- 790 8 0.00
Item Name : Supplying heavy gauge PVC Conduit Pipe.mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary.25mm dia 2mm thick 0 0.00
Unit : Mtr 0 0.00
5 Item Code : Vol 6, Item no-2.2.1 269 4 No --- 1076 3.2 0.00
Item Name : Point wiring using Copper wire with out switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2 X1.5Sq.mm (Phase&Neutral) &1x1.0 Sqmm(earth Wire)Cable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Short point upto3mtr from tapping point to out let via Switch 0 0.00
Unit : Point 0 0.00
6 Item Code : Vol 6, Item no-2.2.2 379 6 No --- 2274 4.8 0.01
Item Name : Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch 0 0.00
Unit : Point 0 0.00
7 Item Code : Vol 6, Item no-2.2.3 555 8 No --- 4440 6.4 0.01
Item Name : Long point above 6Mtr upto 10Mtr from tapping point to out let via switch box 0 0.00
Unit : Point 0 0.00
8 Item Code : Vol 6, Item no-2.3.2 26 80 No --- 2080 64 0.01
Item Name : Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade,1.5 SQMM multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & confirming to GTP. 0 0.00
Unit : Mtr 0 0.00
9 Item Code : Vol 6, Item no-2.3.3 42 80 No --- 3360 64 0.01
Item Name : Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade,2.5 SQMM multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & confirming to GTP. 0 0.00
Unit : Mtr 0 0.00
10 Item Code : Vol 6, Item no-2.3.4 63 60 No --- 3780 48 0.01
Item Name : Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade,4 SQMM multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & confirming to GTP. 0 0.00
Unit : Mtr 0 0.00
11 Item Code : Vol 6, Item no-3.4.6 319 4 No --- 1276 3.2 0.00
Item Name : Supplying and flush mounting powder coated / galvanized metal box size10-12way suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 0 0.00
Unit : Each 0 0.00
12 Item Code : Vol 6, Item no-3.5.6 344 4 No --- 1376 3.2 0.00
Item Name : Supplying and fixing superior quality 10-12Mudular modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metalbox. 0 0.00
Unit : Each 0 0.00
Item Name : Supplying and fixing of 6Amps 0ne way modular switch on existing modular switch plate as per IS 3854 and IS 1293. 0 0.00
Unit : Each 0 0.00
14 Item Code : Vol 6, Item no-3.6.3 171 6 No --- 1026 4.8 0.00
Item Name : Supplying and fixing of 6Amps 3way modular Socketc on existing modular switch plate as per IS 3854 and IS 1293. 0 0.00
Unit : Each 0 0.00
15 Item Code : Vol 6, Item no-3.6.4 357 4 No --- 1428 3.2 0.00
Item Name : Supplying and fixing of modular stepped electronic fan regulator on existing modular switch plate as per and IS 1293. 0 0.00
Unit : Each 0 0.00
16 Item Code : Vol 6, Item no-5.18.4 739 2 No --- 1478 1.6 0.00
Item Name : Supplying and fixingof 6to32 Amps Double pole miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 0 0.00
Unit : Each 0 0.00
17 Item Code : Vol 6, Item no-12.56 3510 2 No --- 7020 1.6 0.02
Item Name : Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should be filled with equal proportion of salt and charcoal 150 mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per lSI specification 7.3.3. of IS 732 using 12 mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia 0 0.00
Unit : Each 0 0.00
Item Name : Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system. 48" Sweep (1200mm) Regular model 0 0.00
Unit : Each 0 0.00
Item Name : LED Indoor Supplying of 1x4' feet - LED PVC Square Batten 20/22W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI more than 80. Power Input: 220-240V @ 50Hz & Power factor more than 0.9 along with CE approved drivers. 2 years Warranty against any manufacturing defect working under standard electrical condition 0 0.00
Unit : Each 0 0.00
1 Category : Vol - 1 -Chapter -I- Earth Work --- 95 95 30.18 2867.1 24.144 0.01
Item Code : 1.12 0 0.00
Item Description : Mechanical Means - Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. In all kinds of soils upto 300 mm depth 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
2 Category : Vol - 1 -Chapter -I- Earth Work --- 102 102 132.7 13535.4 106.16 0.04
Item Code : 1.14.1 0 0.00
Item Description : Mechanical Means - Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In all kinds of soils Depth upto 3 m 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
3 Category : Vol - 1 -Chapter -I- Earth Work --- 2682 2682 4.22 11318.04 3.376 0.03
Item Code : 1.23 0 0.00
Item Description : Mechanical Means - Providing and Filling in foundation with granite / trap broken metal 100mm. and down size & with approved sand including hand packing, ramming, watering, including cost of all materials and labour with all lead and lift complete as per specifications. 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
4 Category : Vol - 1 -Chapter -II- Concrete Works 0 5918 5918 11.19 66222.42 8.952 0.20
Item Code : 2.1.3 0 0.00
Item Description : Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. - Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
5 Category : Vol - 1 -Chapter -II- Concrete Works 0 6227 6725.16 31.33 210699.26 25.064 0.62
Item Code : 2.2.3 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
6 Category : Vol - 1 -Chapter -II- Concrete Works 0 6227 10585.9 3.84 40649.86 3.072 0.12
Item Code : 2.4.3 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
7 Category : Vol - 1 -Chapter -I- Earth Work --- 266 266 99.33 26421.78 79.464 0.08
Item Code : 1.9 0 0.00
Item Description : Manual Means - Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
8 Category : Vol - 1 -Chapter -I- Earth Work --- 474 474 27.24 12911.76 21.792 0.04
Item Code : 1.8 0 0.00
Item Description : Manual Means - Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
9 Category : Vol - 1 -Chapter -II- Concrete Works 0 6327 6327 2.47 15627.69 1.976 0.05
Item Code : 2.4.1 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
10 Category : Vol - 2 -Chapter -5- Stone Masonry Works 0 6364 6364 12.96 82477.44 10.368 0.24
Item Code : 5.4 0 0.00
Item Description : Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
11 Category : Vol - 1 -Chapter -II- Concrete Works 0 6734 11447.8 14.14 161871.89 11.312 0.48
Item Code : 2.5.2 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
12 Category : Vol - 1 -Chapter -II- Concrete Works 0 6734 10101 3.98 40201.98 3.184 0.12
Item Code : 2.5.2 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
13 Category : Vol - 1 -Chapter -II- Concrete Works 0 6734 10774.4 1.3 14006.72 1.04 0.04
Item Code : 2.5.2 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
14 Category : Vol - 1 -Chapter -II- Concrete Works 0 6734 10101 5.52 55757.52 4.416 0.16
Item Code : 2.5.2 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
15 Category : Vol - 1 -Chapter -II- Concrete Works 0 80195 80195 6.17 494803.15 4.936 1.46
Item Code : 2.11.a 0 0.00
Item Description : Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Buildings 0 0.00
Unit : t 0 0.00
Rate Analaysis Performed ?: No 0 0.00
16 Category : Vol - 2 -Chapter -6- Masonry Works 0 7948 7948 6.29 49992.92 5.032 0.15
Item Code : 6.8 0 0.00
Item Description : Providing Brick work with common burnt clay Non Modular bricks of clasS designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
17 Category : Vol - 2 -Chapter -8- Finishing 0 293 293 29.74 8713.82 23.792 0.03
Item Code : 8.2.1 0 0.00
Item Description : Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
18 Category : Vol - 2 -Chapter -8- Finishing 0 369 369 42.39 15641.91 33.912 0.05
Item Code : 8.8 0 0.00
Item Description : Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
19 Category : Vol - 2 -Chapter -9- Flooring 0 1541 1541 8.4 12944.4 6.72 0.04
Item Code : 9.34 0 0.00
Item Description : Flooring with 25mm thick polished tandur blue stone slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab, , including cost of materials, labour, curing, polishing complete as per specifications. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
20 Category : Vol - 2 -Chapter -9- Flooring 0 1265 1265 21.6 27324 17.28 0.08
Item Code : 9.6.1 0 0.00
Item Description : Providing and laying Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) Light shade pigment using white cement 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
21 Category : Vol - 2 -Chapter -11- Steel and Aluminium Work 0 183 183 289.17 52918.11 231.336 0.16
Item Code : 11.34B 0 0.00
Item Description : Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. 0 0.00
Unit : kg 0 0.00
Rate Analaysis Performed ?: No 0 0.00
22 Category : Vol - 2 -Chapter -11- Steel and Aluminium Work 0 148 148 30.24 4475.52 24.192 0.01
Item Code : 11.11.1 0 0.00
Item Description : Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. 0 0.00
Unit : kg 0 0.00
Rate Analaysis Performed ?: No 0 0.00
23 Category : Vol - 2 -Chapter -8- Finishing 0 100 100 60.91 6091 48.728 0.02
Item Code : 8.51 0 0.00
Item Description : Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
24 Category : Vol - 2 -Chapter -8- Finishing 0 137 137 60.91 8344.67 48.728 0.02
Item Code : 8.25 0 0.00
Item Description : Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and in- cluding water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
25 Category : Vol - 2 -Chapter -8- Finishing 0 53 53 42.39 2246.67 33.912 0.01
Item Code : 8.27 0 0.00
Item Description : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
26 Category : Vol - 2 -Chapter -8- Finishing 0 89 89 42.39 3772.71 33.912 0.01
Item Code : 8.28 0 0.00
Item Description : Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
27 Category : Vol - 2 -Chapter -8- Finishing 0 50 50 13.77 688.5 11.016 0.00
Item Code : 8.34.3 0 0.00
Item Description : Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
28 Category : Vol - 2 -Chapter -8- Finishing 0 115 115 13.77 1583.55 11.016 0.00
Item Code : 8.40 0 0.00
Item Description : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
29 Category : Vol - 2 -Chapter -13- Water Supply & Plumbing Work 0 291 291 11 3201 8.8 0.01
Item Code : 13.48 0 0.00
Item Description : Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 100 mm diameter 0 0.00
Unit : m 0 0.00
Rate Analaysis Performed ?: No 0 0.00
30 Category : Vol - 1 -Chapter -II- Concrete Works 1 6327 6390.27 1.1 7029.3 0.88 0.02
Item Code : 2.4.1 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
31 Category : Vol - 1 -Chapter -II- Concrete Works 1 6734 11562.28 18.22 210664.74 14.576 0.62
Item Code : 2.5.2 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
32 Category : Vol - 1 -Chapter -II- Concrete Works 1 6734 10882.14 19.7 214378.16 15.76 0.63
Item Code : 2.5.2 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
33 Category : Vol - 1 -Chapter -II- Concrete Works 1 6734 10202.01 25.32 258314.89 20.256 0.76
Item Code : 2.5.2 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
34 Category : Vol - 1 -Chapter -II- Concrete Works 1 6734 9861.94 0.61 6015.78 0.488 0.02
Item Code : 2.5.2 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
35 Category : Vol - 1 -Chapter -II- Concrete Works 1 80195 80996.95 9.94 805109.68 7.952 2.38
Item Code : 2.11.a 0 0.00
Item Description : Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Buildings 0 0.00
Unit : t 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
36 Category : Vol - 2 -Chapter -6- Masonry Works 1 1029 1039.29 34.2 35543.72 3.762 3.0096 0.11
Item Code : 6.15 0 0.00
Item Description : Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
37 Category : Vol - 2 -Chapter -8- Finishing 1 293 295.93 288.58 85399.48 230.864 0.25
Item Code : 8.2.1 0 0.00
Item Description : Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
38 Category : Vol - 2 -Chapter -8- Finishing 1 369 372.69 264.39 98535.51 211.512 0.29
Item Code : 8.8 0 0.00
Item Description : Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
Item Code : 9.34 0 0.00
Item Description : Flooring with 25mm thick polished tandur blue stone slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab, , including cost of materials, labour, curing, polishing complete as per specifications. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
40 Category : Vol - 2 -Chapter -11- Steel and Aluminium Work 1 183 184.83 907.2 167677.78 725.76 0.50
Item Code : 11.34B 0 0.00
Item Description : Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. 0 0.00
Unit : kg 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
41 Category : Vol - 2 -Chapter -11- Steel and Aluminium Work 1 531 536.31 43.2 23168.59 34.56 0.07
Item Description : Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer- in-charge: Profile E Fixing with adjustable lugs with split end tail to each jamb including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. 0 0.00
Unit : m 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
42 Category : Vol - 2 -Chapter -11- Steel and Aluminium Work 1 5221 5273.21 17.28 91121.07 13.824 0.27
Item Code : 11.4 0 0.00
Item Description : Providing and fixing 1 mm thick M.S. sheet sliding-shutters, with frame and diagonal braces of 40x40x6 mm angle iron, 3 mm M.S. gusset plates at the junctions and corners, 25 mm dia pulley, 40x40x6 mm angle and T- iron guide at the top and bottom respectively, including applying a priming coat of approved steel primer including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
43 Category : Vol - 2 -Chapter -11- Steel and Aluminium Work 1 148 149.48 207.36 30996.17 165.888 0.09
Item Code : 11.11.1 0 0.00
Item Description : Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. 0 0.00
Unit : kg 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
44 Category : Vol - 2 -Chapter -8- Finishing 1 100 101 470.56 47526.56 376.448 0.14
Item Code : 8.51 0 0.00
Item Description : Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
45 Category : Vol - 2 -Chapter -8- Finishing 1 137 138.37 470.56 65111.39 376.448 0.19
Item Code : 8.25 0 0.00
Item Description : Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and in- cluding water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
46 Category : Vol - 2 -Chapter -8- Finishing 1 53 53.53 264.39 14152.8 211.512 0.04
Item Code : 8.27 0 0.00
Item Description : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
47 Category : Vol - 2 -Chapter -8- Finishing 1 89 89.89 264.39 23766.02 211.512 0.07
Item Code : 8.28 0 0.00
Item Description : Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
48 Category : Vol - 2 -Chapter -8- Finishing 1 50 50.5 69.12 3490.56 55.296 0.01
Item Code : 8.34.3 0 0.00
Item Description : Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
49 Category : Vol - 2 -Chapter -8- Finishing 1 115 116.15 69.12 8028.29 55.296 0.02
Item Code : 8.40 0 0.00
Item Description : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
50 Category : Vol - 2 -Chapter -8- Finishing 1 94 94.94 17.28 1640.56 13.824 0.00
Item Code : 8.43 0 0.00
Item Description : Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade :Two coats on new work including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
51 Category : Vol - 2 -Chapter -13- Water Supply & Plumbing Work 1 291 293.91 21 6172.11 16.8 0.02
Item Code : 13.48 0 0.00
Item Description : Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 100 mm diameter 0 0.00
Unit : m 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
52 Category : Vol - 2 -Chapter -8- Finishing 1 4 4.04 2000 8080 1600 0.02
Item Code : 8.49 0 0.00
Item Description : Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : per letter per cm height 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
53 Category : Vol - 2 -Chapter -6- Masonry Works 1 7948 8027.48 52.32 419997.75 41.856 1.24
Item Code : 6.8 0 0.00
Item Description : Providing Brick work with common burnt clay Non Modular bricks of clasS designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
1 Item Code : Vol 6, Item no-1.2.1 66 60 No --- 3960 48 0.01
Item Name : Concealed Conduit System :Supplying heavy gauge PVC conduit pipe mm dia mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary19/20mm dia 2mm thick 0 0.00
Unit : Mtr 0 0.00
2 Item Code : Vol 6, Item no-1.2.2 78 30 No --- 2340 24 0.01
Item Name : Concealed Conduit System :Supplying heavy gauge PVC conduit pipe . mm dia.mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary25mm dia 2mm thick 0 0.00
Unit : Mtr 0 0.00
3 Item Code : Vol 6, Item no-1.3.1 68 30 No --- 2040 24 0.01
Item Name : Supplying heavy gauge PVC Conduit Pipe.mmthick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary.19/20mm dia 2mm thick 0 0.00
Unit : Mtr 0 0.00
4 Item Code : Vol 6, Item no-1.3.2 79 15 No --- 1185 12 0.00
Item Name : Supplying heavy gauge PVC Conduit Pipe.mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary.25mm dia 2mm thick 0 0.00
Unit : Mtr 0 0.00
5 Item Code : Vol 6, Item no-2.2.1 269 6 No --- 1614 4.8 0.00
Item Name : Point wiring using Copper wire with out switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2 X1.5Sq.mm (Phase&Neutral) &1x1.0 Sqmm(earth Wire)Cable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Short point upto3mtr from tapping point to out let via Switch 0 0.00
Unit : Point 0 0.00
6 Item Code : Vol 6, Item no-2.2.2 379 9 No --- 3411 7.2 0.01
Item Name : Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch 0 0.00
Unit : Point 0 0.00
7 Item Code : Vol 6, Item no-2.2.3 555 12 No --- 6660 9.6 0.02
Item Name : Long point above 6Mtr upto 10Mtr from tapping point to out let via switch box 0 0.00
Unit : Point 0 0.00
8 Item Code : Vol 6, Item no-2.3.2 26 120 No --- 3120 96 0.01
Item Name : Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade,1.5 SQMM multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & confirming to GTP. 0 0.00
Unit : Mtr 0 0.00
9 Item Code : Vol 6, Item no-2.3.3 42 120 No --- 5040 96 0.01
Item Name : Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade,2.5 SQMM multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & confirming to GTP. 0 0.00
Unit : Mtr 0 0.00
10 Item Code : Vol 6, Item no-2.3.4 63 90 No --- 5670 72 0.02
Item Name : Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade,4 SQMM multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & confirming to GTP. 0 0.00
Unit : Mtr 0 0.00
11 Item Code : Vol 6, Item no-3.4.6 319 6 No --- 1914 4.8 0.01
Item Name : Supplying and flush mounting powder coated / galvanized metal box size10-12way suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 0 0.00
Unit : Each 0 0.00
12 Item Code : Vol 6, Item no-3.5.6 344 6 No --- 2064 4.8 0.01
Item Name : Supplying and fixing superior quality 10-12Mudular modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metalbox. 0 0.00
Unit : Each 0 0.00
Item Name : Supplying and fixing of 6Amps 0ne way modular switch on existing modular switch plate as per IS 3854 and IS 1293. 0 0.00
Unit : Each 0 0.00
14 Item Code : Vol 6, Item no-3.6.3 171 9 No --- 1539 7.2 0.00
Item Name : Supplying and fixing of 6Amps 3way modular Socketc on existing modular switch plate as per IS 3854 and IS 1293. 0 0.00
Unit : Each 0 0.00
15 Item Code : Vol 6, Item no-3.6.4 357 6 No --- 2142 4.8 0.01
Item Name : Supplying and fixing of modular stepped electronic fan regulator on existing modular switch plate as per and IS 1293. 0 0.00
Unit : Each 0 0.00
16 Item Code : Vol 6, Item no-5.18.4 739 3 No --- 2217 2.4 0.01
Item Name : Supplying and fixingof 6to32 Amps Double pole miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 0 0.00
Unit : Each 0 0.00
Item Name : Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should be filled with equal proportion of salt and charcoal 150 mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per lSI specification 7.3.3. of IS 732 using 12 mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia 0 0.00
Unit : Each 0 0.00
Item Name : Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system. 48" Sweep (1200mm) Regular model 0 0.00
Unit : Each 0 0.00
Item Name : LED Indoor Supplying of 1x4' feet - LED PVC Square Batten 20/22W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI more than 80. Power Input: 220-240V @ 50Hz & Power factor more than 0.9 along with CE approved drivers. 2 years Warranty against any manufacturing defect working under standard electrical condition 0 0.00
Unit : Each 0 0.00
1 Category : Vol - 1 -Chapter -I- Earth Work --- 95 95 60.17 5716.15 48.136 0.02
Item Code : 1.12 0 0.00
Item Description : Mechanical Means - Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. In all kinds of soils upto 300 mm depth 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
2 Category : Vol - 1 -Chapter -I- Earth Work --- 102 102 139.42 14220.84 111.536 0.04
Item Code : 1.14.1 0 0.00
Item Description : Mechanical Means - Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In all kinds of soils Depth upto 3 m 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
3 Category : Vol - 2 -Chapter -4- Anti-Termite Treatment 0 118 118 200.58 23668.44 160.464 0.07
Item Code : 4.1 0 0.00
Item Description : Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
4 Category : Vol - 1 -Chapter -I- Earth Work --- 2682 2682 8.87 23789.34 7.096 0.07
Item Code : 1.23 0 0.00
Item Description : Mechanical Means - Providing and Filling in foundation with granite / trap broken metal 100mm. and down size & with approved sand including hand packing, ramming, watering, including cost of all materials and labour with all lead and lift complete as per specifications. 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
5 Category : Vol - 1 -Chapter -II- Concrete Works 0 5918 5918 36.63 216776.34 29.304 0.64
Item Code : 2.1.3 0 0.00
Item Description : Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. - Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
6 Category : Vol - 1 -Chapter -II- Concrete Works 0 6227 6725.16 28.88 194222.62 23.104 0.57
Item Code : 2.2.3 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
7 Category : Vol - 1 -Chapter -II- Concrete Works 0 6227 10585.9 1.99 21065.94 1.592 0.06
Item Code : 2.4.3 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
8 Category : Vol - 1 -Chapter -I- Earth Work --- 266 266 59.38 15795.08 47.504 0.05
Item Code : 1.9 0 0.00
Item Description : Manual Means - Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
9 Category : Vol - 1 -Chapter -I- Earth Work --- 474 474 185.22 87794.28 148.176 0.26
Item Code : 1.8 0 0.00
Item Description : Manual Means - Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
10 Category : Vol - 1 -Chapter -II- Concrete Works 0 6327 6327 6.79 42960.33 5.432 0.13
Item Code : 2.4.1 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
11 Category : Vol - 2 -Chapter -5- Stone Masonry Works 0 6364 6364 63.87 406468.68 51.096 1.20
Item Code : 5.4 0 0.00
Item Description : Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
12 Category : Vol - 1 -Chapter -II- Concrete Works 0 6734 11447.8 8.96 102572.29 7.168 0.30
Item Code : 2.5.2 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
13 Category : Vol - 1 -Chapter -II- Concrete Works 0 6734 10101 12.03 121515.03 9.624 0.36
Item Code : 2.5.2 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
14 Category : Vol - 1 -Chapter -II- Concrete Works 0 6734 10774.4 15.89 171205.22 12.712 0.51
Item Code : 2.5.2 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
15 Category : Vol - 1 -Chapter -II- Concrete Works 0 6734 9764.3 0.61 5956.22 0.488 0.02
Item Code : 2.5.2 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
16 Category : Vol - 1 -Chapter -II- Concrete Works 0 6734 10101 29.72 300201.72 23.776 0.89
Item Code : 2.5.2 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
17 Category : Vol - 1 -Chapter -II- Concrete Works 0 80195 80195 9.36 750625.2 7.488 2.22
Item Code : 2.11.a 0 0.00
Item Description : Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Buildings 0 0.00
Unit : t 0 0.00
Rate Analaysis Performed ?: No 0 0.00
18 Category : Vol - 2 -Chapter -6- Masonry Works 0 7948 7948 57.4 456215.2 45.92 1.35
Item Code : 6.8 0 0.00
Item Description : Providing Brick work with common burnt clay Non Modular bricks of clasS designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
19 Category : Vol - 2 -Chapter -6- Masonry Works 0 1029 1029 34.2 35191.8 3.762 3.0096 0.10
Item Code : 6.15 0 0.00
Item Description : Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
20 Category : Vol - 2 -Chapter -8- Finishing 0 293 293 300.82 88140.26 240.656 0.26
Item Code : 8.2.1 0 0.00
Item Description : Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
21 Category : Vol - 2 -Chapter -8- Finishing 0 369 369 293.94 108463.86 235.152 0.32
Item Code : 8.8 0 0.00
Item Description : Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
22 Category : Vol - 2 -Chapter -9- Flooring 0 1541 1541 185.79 286302.39 148.632 0.85
Item Code : 9.34 0 0.00
Item Description : Flooring with 25mm thick polished tandur blue stone slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab, , including cost of materials, labour, curing, polishing complete as per specifications. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
23 Category : Vol - 2 -Chapter -9- Flooring 0 1265 1265 32.1 40606.5 25.68 0.12
Item Code : 9.6.1 0 0.00
Item Description : Providing and laying Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) Light shade pigment using white cement 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
24 Category : Vol - 2 -Chapter -11- Steel and Aluminium Work 0 183 183 737.1 134889.3 589.68 0.40
Item Code : 11.34B 0 0.00
Item Description : Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. 0 0.00
Unit : kg 0 0.00
Rate Analaysis Performed ?: No 0 0.00
25 Category : Vol - 2 -Chapter -11- Steel and Aluminium Work 0 531 531 43.2 22939.2 34.56 0.07
Item Description : Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer- in-charge: Profile E Fixing with adjustable lugs with split end tail to each jamb including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. 0 0.00
Unit : m 0 0.00
Rate Analaysis Performed ?: No 0 0.00
26 Category : Vol - 2 -Chapter -11- Steel and Aluminium Work 0 5221 5221 17.28 90218.88 13.824 0.27
Item Code : 11.4 0 0.00
Item Description : Providing and fixing 1 mm thick M.S. sheet sliding-shutters, with frame and diagonal braces of 40x40x6 mm angle iron, 3 mm M.S. gusset plates at the junctions and corners, 25 mm dia pulley, 40x40x6 mm angle and T- iron guide at the top and bottom respectively, including applying a priming coat of approved steel primer including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
27 Category : Vol - 2 -Chapter -11- Steel and Aluminium Work 0 148 148 297 43956 237.6 0.13
Item Code : 11.11.1 0 0.00
Item Description : Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. 0 0.00
Unit : kg 0 0.00
Rate Analaysis Performed ?: No 0 0.00
28 Category : Vol - 2 -Chapter -8- Finishing 0 100 100 560.35 56035 448.28 0.17
Item Code : 8.51 0 0.00
Item Description : Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
29 Category : Vol - 2 -Chapter -8- Finishing 0 137 137 560.35 76767.95 448.28 0.23
Item Code : 8.25 0 0.00
Item Description : Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and in- cluding water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
30 Category : Vol - 2 -Chapter -8- Finishing 0 53 53 293.95 15579.35 235.16 0.05
Item Code : 8.27 0 0.00
Item Description : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
31 Category : Vol - 2 -Chapter -8- Finishing 0 89 89 293.95 26161.55 235.16 0.08
Item Code : 8.28 0 0.00
Item Description : Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
32 Category : Vol - 2 -Chapter -8- Finishing 0 50 50 78.3 3915 62.64 0.01
Item Code : 8.34.3 0 0.00
Item Description : Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
33 Category : Vol - 2 -Chapter -8- Finishing 0 115 115 78.3 9004.5 62.64 0.03
Item Code : 8.40 0 0.00
Item Description : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
34 Category : Vol - 2 -Chapter -8- Finishing 0 4 4 2000 8000 1600 0.02
Item Code : 8.49 0 0.00
Item Description : Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : per letter per cm height 0 0.00
Rate Analaysis Performed ?: No 0 0.00
35 Category : Vol - 2 -Chapter -8- Finishing 0 94 94 17.28 1624.32 13.824 0.00
Item Code : 8.43 0 0.00
Item Description : Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade :Two coats on new work including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
36 Category : Vol - 2 -Chapter -13- Water Supply & Plumbing Work 0 291 291 11 3201 8.8 0.01
Item Code : 13.48 0 0.00
Item Description : Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 100 mm diameter 0 0.00
Unit : m 0 0.00
Rate Analaysis Performed ?: No 0 0.00
37 Category : Vol - 1 -Chapter -II- Concrete Works 1 6327 6390.27 0.78 4984.41 0.624 0.01
Item Code : 2.4.1 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
38 Category : Vol - 1 -Chapter -II- Concrete Works 1 6734 11562.28 4.48 51799.01 3.584 0.15
Item Code : 2.5.2 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
39 Category : Vol - 1 -Chapter -II- Concrete Works 1 6734 10882.14 12.32 134067.96 9.856 0.40
Item Code : 2.5.2 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
40 Category : Vol - 1 -Chapter -II- Concrete Works 1 6734 9861.94 0.41 4043.4 0.328 0.01
Item Code : 2.5.2 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
41 Category : Vol - 1 -Chapter -II- Concrete Works 1 6734 10202.01 18.2 185676.58 14.56 0.55
Item Code : 2.5.2 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
42 Category : Vol - 1 -Chapter -II- Concrete Works 1 80195 80996.95 3.93 318318.01 3.144 0.94
Item Code : 2.11.a 0 0.00
Item Description : Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Buildings 0 0.00
Unit : t 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
43 Category : Vol - 2 -Chapter -6- Masonry Works 1 7948 8027.48 47.47 381064.48 37.976 1.13
Item Code : 6.8 0 0.00
Item Description : Providing Brick work with common burnt clay Non Modular bricks of clasS designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
44 Category : Vol - 2 -Chapter -8- Finishing 1 293 295.93 206.74 61180.57 165.392 0.18
Item Code : 8.2.1 0 0.00
Item Description : Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
45 Category : Vol - 2 -Chapter -8- Finishing 1 369 372.69 218.99 81615.38 175.192 0.24
Item Code : 8.8 0 0.00
Item Description : Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
Item Code : 9.34 0 0.00
Item Description : Flooring with 25mm thick polished tandur blue stone slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab, , including cost of materials, labour, curing, polishing complete as per specifications. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
47 Category : Vol - 2 -Chapter -11- Steel and Aluminium Work 1 183 184.83 624.96 115511.36 499.968 0.34
Item Code : 11.34B 0 0.00
Item Description : Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. 0 0.00
Unit : kg 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
48 Category : Vol - 2 -Chapter -11- Steel and Aluminium Work 1 531 536.31 28.8 15445.73 23.04 0.05
Item Description : Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer- in-charge: Profile E Fixing with adjustable lugs with split end tail to each jamb including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. 0 0.00
Unit : m 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
49 Category : Vol - 2 -Chapter -11- Steel and Aluminium Work 1 5221 5273.21 11.52 60747.38 9.216 0.18
Item Code : 11.4 0 0.00
Item Description : Providing and fixing 1 mm thick M.S. sheet sliding-shutters, with frame and diagonal braces of 40x40x6 mm angle iron, 3 mm M.S. gusset plates at the junctions and corners, 25 mm dia pulley, 40x40x6 mm angle and T- iron guide at the top and bottom respectively, including applying a priming coat of approved steel primer including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
50 Category : Vol - 2 -Chapter -11- Steel and Aluminium Work 1 148 149.48 138.24 20664.12 110.592 0.06
Item Code : 11.11.1 0 0.00
Item Description : Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. 0 0.00
Unit : kg 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
51 Category : Vol - 2 -Chapter -8- Finishing 1 100 101 377.56 38133.56 302.048 0.11
Item Code : 8.51 0 0.00
Item Description : Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
52 Category : Vol - 2 -Chapter -8- Finishing 1 137 138.37 377.56 52242.98 302.048 0.15
Item Code : 8.25 0 0.00
Item Description : Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and in- cluding water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
53 Category : Vol - 2 -Chapter -8- Finishing 1 53 53.53 219 11723.07 175.2 0.03
Item Code : 8.27 0 0.00
Item Description : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
54 Category : Vol - 2 -Chapter -8- Finishing 1 89 89.89 219 19685.91 175.2 0.06
Item Code : 8.28 0 0.00
Item Description : Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
55 Category : Vol - 2 -Chapter -8- Finishing 1 50 50.5 47.04 2375.52 37.632 0.01
Item Code : 8.34.3 0 0.00
Item Description : Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
56 Category : Vol - 2 -Chapter -8- Finishing 1 115 116.15 47.04 5463.7 37.632 0.02
Item Code : 8.40 0 0.00
Item Description : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
57 Category : Vol - 2 -Chapter -8- Finishing 1 94 94.94 11.52 1093.71 9.216 0.00
Item Code : 8.43 0 0.00
Item Description : Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade :Two coats on new work including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
58 Category : Vol - 2 -Chapter -13- Water Supply & Plumbing Work 1 291 293.91 21 6172.11 16.8 0.02
Item Code : 13.48 0 0.00
Item Description : Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 100 mm diameter 0 0.00
Unit : m 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
59 Category : Vol - 2 -Chapter -6- Masonry Works 1 1029 1039.29 24.72 25691.25 2.7192 2.17536 0.08
Item Code : 6.15 0 0.00
Item Description : Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
1 Item Code : Vol 6, Item no-1.2.1 66 100 No --- 6600 80 0.02
Item Name : Concealed Conduit System :Supplying heavy gauge PVC conduit pipe mm dia mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary19/20mm dia 2mm thick 0 0.00
Unit : Mtr 0 0.00
2 Item Code : Vol 6, Item no-1.2.2 78 50 No --- 3900 40 0.01
Item Name : Concealed Conduit System :Supplying heavy gauge PVC conduit pipe . mm dia.mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary25mm dia 2mm thick 0 0.00
Unit : Mtr 0 0.00
3 Item Code : Vol 6, Item no-1.3.1 68 50 No --- 3400 40 0.01
Item Name : Supplying heavy gauge PVC Conduit Pipe.mmthick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary.19/20mm dia 2mm thick 0 0.00
Unit : Mtr 0 0.00
4 Item Code : Vol 6, Item no-1.3.2 79 25 No --- 1975 20 0.01
Item Name : Supplying heavy gauge PVC Conduit Pipe.mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary.25mm dia 2mm thick 0 0.00
Unit : Mtr 0 0.00
5 Item Code : Vol 6, Item no-2.2.1 269 10 No --- 2690 8 0.01
Item Name : Point wiring using Copper wire with out switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2 X1.5Sq.mm (Phase&Neutral) &1x1.0 Sqmm(earth Wire)Cable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Short point upto3mtr from tapping point to out let via Switch 0 0.00
Unit : Point 0 0.00
6 Item Code : Vol 6, Item no-2.2.2 379 15 No --- 5685 12 0.02
Item Name : Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch 0 0.00
Unit : Point 0 0.00
7 Item Code : Vol 6, Item no-2.2.3 555 20 No --- 11100 16 0.03
Item Name : Long point above 6Mtr upto 10Mtr from tapping point to out let via switch box 0 0.00
Unit : Point 0 0.00
8 Item Code : Vol 6, Item no-2.3.2 26 200 No --- 5200 160 0.02
Item Name : Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade,1.5 SQMM multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & confirming to GTP. 0 0.00
Unit : Mtr 0 0.00
9 Item Code : Vol 6, Item no-2.3.3 42 200 No --- 8400 160 0.02
Item Name : Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade,2.5 SQMM multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & confirming to GTP. 0 0.00
Unit : Mtr 0 0.00
10 Item Code : Vol 6, Item no-2.3.4 63 150 No --- 9450 120 0.03
Item Name : Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade,4 SQMM multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & confirming to GTP. 0 0.00
Unit : Mtr 0 0.00
11 Item Code : Vol 6, Item no-3.4.6 319 10 No --- 3190 8 0.01
Item Name : Supplying and flush mounting powder coated / galvanized metal box size10-12way suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 0 0.00
Unit : Each 0 0.00
12 Item Code : Vol 6, Item no-3.5.6 344 10 No --- 3440 8 0.01
Item Name : Supplying and fixing superior quality 10-12Mudular modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metalbox. 0 0.00
Unit : Each 0 0.00
13 Item Code : Vol 6, Item no-3.6.1 102 40 No --- 4080 32 0.01
Item Name : Supplying and fixing of 6Amps 0ne way modular switch on existing modular switch plate as per IS 3854 and IS 1293. 0 0.00
Unit : Each 0 0.00
14 Item Code : Vol 6, Item no-3.6.3 171 15 No --- 2565 12 0.01
Item Name : Supplying and fixing of 6Amps 3way modular Socketc on existing modular switch plate as per IS 3854 and IS 1293. 0 0.00
Unit : Each 0 0.00
15 Item Code : Vol 6, Item no-3.6.4 357 10 No --- 3570 8 0.01
Item Name : Supplying and fixing of modular stepped electronic fan regulator on existing modular switch plate as per and IS 1293. 0 0.00
Unit : Each 0 0.00
16 Item Code : Vol 6, Item no-5.18.4 739 5 No --- 3695 4 0.01
Item Name : Supplying and fixingof 6to32 Amps Double pole miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 0 0.00
Unit : Each 0 0.00
17 Item Code : Vol 6, Item no-12.56 3510 5 No --- 17550 4 0.05
Item Name : Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should be filled with equal proportion of salt and charcoal 150 mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per lSI specification 7.3.3. of IS 732 using 12 mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia 0 0.00
Unit : Each 0 0.00
18 Item Code : Vol 6, Item no-6.3.1 2984 10 No --- 29840 8 0.09
Item Name : Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system. 48" Sweep (1200mm) Regular model 0 0.00
Unit : Each 0 0.00
Item Name : LED Indoor Supplying of 1x4' feet - LED PVC Square Batten 20/22W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI more than 80. Power Input: 220-240V @ 50Hz & Power factor more than 0.9 along with CE approved drivers. 2 years Warranty against any manufacturing defect working under standard electrical condition 0 0.00
Unit : Each 0 0.00
1 Category : Vol - 1 -Chapter -I- Earth Work --- 95 95 34.76 3302.2 27.808 0.01
Item Code : 1.12 0 0.00
Item Description : Mechanical Means - Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. In all kinds of soils upto 300 mm depth 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
2 Category : Vol - 1 -Chapter -I- Earth Work --- 102 102 82.75 8440.5 66.2 0.02
Item Code : 1.14.1 0 0.00
Item Description : Mechanical Means - Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In all kinds of soils Depth upto 3 m 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
3 Category : Vol - 2 -Chapter -4- Anti-Termite Treatment 0 118 118 115.88 13673.84 92.704 0.04
Item Code : 4.1 0 0.00
Item Description : Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
4 Category : Vol - 1 -Chapter -I- Earth Work --- 2682 2682 5.2 13946.4 4.16 0.04
Item Code : 1.23 0 0.00
Item Description : Mechanical Means - Providing and Filling in foundation with granite / trap broken metal 100mm. and down size & with approved sand including hand packing, ramming, watering, including cost of all materials and labour with all lead and lift complete as per specifications. 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
5 Category : Vol - 1 -Chapter -II- Concrete Works 0 5918 5918 21.48 127118.64 17.184 0.38
Item Code : 2.1.3 0 0.00
Item Description : Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. - Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
6 Category : Vol - 1 -Chapter -II- Concrete Works 0 6227 6725.16 18.29 123003.18 14.632 0.36
Item Code : 2.2.3 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
7 Category : Vol - 1 -Chapter -II- Concrete Works 0 6227 10585.9 1.51 15984.71 1.208 0.05
Item Code : 2.4.3 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
8 Category : Vol - 1 -Chapter -I- Earth Work --- 266 266 34.93 9291.38 27.944 0.03
Item Code : 1.9 0 0.00
Item Description : Manual Means - Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
9 Category : Vol - 1 -Chapter -I- Earth Work --- 474 474 96.86 45911.64 77.488 0.14
Item Code : 1.8 0 0.00
Item Description : Manual Means - Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
10 Category : Vol - 1 -Chapter -II- Concrete Works 0 6327 6327 3.49 22081.23 2.792 0.07
Item Code : 2.4.1 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
11 Category : Vol - 2 -Chapter -5- Stone Masonry Works 0 6364 6364 36.09 229676.76 28.872 0.68
Item Code : 5.4 0 0.00
Item Description : Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
12 Category : Vol - 1 -Chapter -II- Concrete Works 0 6734 11447.8 5.6 64107.68 4.48 0.19
Item Code : 2.5.2 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
13 Category : Vol - 1 -Chapter -II- Concrete Works 0 6734 10101 7.18 72525.18 5.744 0.21
Item Code : 2.5.2 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
14 Category : Vol - 1 -Chapter -II- Concrete Works 0 6734 10774.4 9.69 104403.94 7.752 0.31
Item Code : 2.5.2 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
15 Category : Vol - 1 -Chapter -II- Concrete Works 0 6734 9764.3 0.41 4003.36 0.328 0.01
Item Code : 2.5.2 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
16 Category : Vol - 1 -Chapter -II- Concrete Works 0 6734 10101 14.48 146262.48 11.584 0.43
Item Code : 2.5.2 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
17 Category : Vol - 1 -Chapter -II- Concrete Works 0 80195 80195 4.68 375312.6 3.744 1.11
Item Code : 2.11.a 0 0.00
Item Description : Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Buildings 0 0.00
Unit : t 0 0.00
Rate Analaysis Performed ?: No 0 0.00
18 Category : Vol - 2 -Chapter -6- Masonry Works 0 7948 7948 36.52 290260.96 29.216 0.86
Item Code : 6.8 0 0.00
Item Description : Providing Brick work with common burnt clay Non Modular bricks of clasS designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
19 Category : Vol - 2 -Chapter -6- Masonry Works 0 1029 1029 24.72 25436.88 2.7192 2.17536 0.08
Item Code : 6.15 0 0.00
Item Description : Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
20 Category : Vol - 2 -Chapter -8- Finishing 0 293 293 149.64 43844.52 119.712 0.13
Item Code : 8.2.1 0 0.00
Item Description : Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
21 Category : Vol - 2 -Chapter -8- Finishing 0 369 369 219.12 80855.28 175.296 0.24
Item Code : 8.8 0 0.00
Item Description : Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
22 Category : Vol - 2 -Chapter -9- Flooring 0 1541 1541 106.68 164393.88 85.344 0.49
Item Code : 9.34 0 0.00
Item Description : Flooring with 25mm thick polished tandur blue stone slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab, , including cost of materials, labour, curing, polishing complete as per specifications. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
23 Category : Vol - 2 -Chapter -9- Flooring 0 1265 1265 4.5 5692.5 3.6 0.02
Item Code : 9.6.1 0 0.00
Item Description : Providing and laying Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) Light shade pigment using white cement 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
24 Category : Vol - 2 -Chapter -11- Steel and Aluminium Work 0 183 183 487.62 89234.46 390.096 0.26
Item Code : 11.34B 0 0.00
Item Description : Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. 0 0.00
Unit : kg 0 0.00
Rate Analaysis Performed ?: No 0 0.00
25 Category : Vol - 2 -Chapter -11- Steel and Aluminium Work 0 531 531 28.8 15292.8 23.04 0.05
Item Description : Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer- in-charge: Profile E Fixing with adjustable lugs with split end tail to each jamb including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. 0 0.00
Unit : m 0 0.00
Rate Analaysis Performed ?: No 0 0.00
26 Category : Vol - 2 -Chapter -11- Steel and Aluminium Work 0 5221 5221 11.52 60145.92 9.216 0.18
Item Code : 11.4 0 0.00
Item Description : Providing and fixing 1 mm thick M.S. sheet sliding-shutters, with frame and diagonal braces of 40x40x6 mm angle iron, 3 mm M.S. gusset plates at the junctions and corners, 25 mm dia pulley, 40x40x6 mm angle and T- iron guide at the top and bottom respectively, including applying a priming coat of approved steel primer including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
27 Category : Vol - 2 -Chapter -11- Steel and Aluminium Work 0 148 148 138.24 20459.52 110.592 0.06
Item Code : 11.11.1 0 0.00
Item Description : Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. 0 0.00
Unit : kg 0 0.00
Rate Analaysis Performed ?: No 0 0.00
28 Category : Vol - 2 -Chapter -8- Finishing 0 100 100 293.6 29360 234.88 0.09
Item Code : 8.51 0 0.00
Item Description : Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
29 Category : Vol - 2 -Chapter -8- Finishing 0 137 137 293.6 40223.2 234.88 0.12
Item Code : 8.25 0 0.00
Item Description : Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and in- cluding water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
30 Category : Vol - 2 -Chapter -8- Finishing 0 53 53 219.12 11613.36 175.296 0.03
Item Code : 8.27 0 0.00
Item Description : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
31 Category : Vol - 2 -Chapter -8- Finishing 0 89 89 219.12 19501.68 175.296 0.06
Item Code : 8.28 0 0.00
Item Description : Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
32 Category : Vol - 2 -Chapter -8- Finishing 0 50 50 52.02 2601 41.616 0.01
Item Code : 8.34.3 0 0.00
Item Description : Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
33 Category : Vol - 2 -Chapter -8- Finishing 0 115 115 52.02 5982.3 41.616 0.02
Item Code : 8.40 0 0.00
Item Description : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
34 Category : Vol - 2 -Chapter -8- Finishing 0 4 4 2000 8000 1600 0.02
Item Code : 8.49 0 0.00
Item Description : Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : per letter per cm height 0 0.00
Rate Analaysis Performed ?: No 0 0.00
35 Category : Vol - 2 -Chapter -8- Finishing 0 94 94 11.52 1082.88 9.216 0.00
Item Code : 8.43 0 0.00
Item Description : Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade :Two coats on new work including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
36 Category : Vol - 2 -Chapter -13- Water Supply & Plumbing Work 0 291 291 11 3201 8.8 0.01
Item Code : 13.48 0 0.00
Item Description : Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 100 mm diameter 0 0.00
Unit : m 0 0.00
Rate Analaysis Performed ?: No 0 0.00
1 Item Code : Vol 6, Item no-1.2.1 66 40 No --- 2640 32 0.01
Item Name : Concealed Conduit System :Supplying heavy gauge PVC conduit pipe mm dia mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary19/20mm dia 2mm thick 0 0.00
Unit : Mtr 0 0.00
2 Item Code : Vol 6, Item no-1.2.2 78 20 No --- 1560 16 0.00
Item Name : Concealed Conduit System :Supplying heavy gauge PVC conduit pipe . mm dia.mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary25mm dia 2mm thick 0 0.00
Unit : Mtr 0 0.00
3 Item Code : Vol 6, Item no-1.3.1 68 20 No --- 1360 16 0.00
Item Name : Supplying heavy gauge PVC Conduit Pipe.mmthick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary.19/20mm dia 2mm thick 0 0.00
Unit : Mtr 0 0.00
4 Item Code : Vol 6, Item no-1.3.2 79 10 No --- 790 8 0.00
Item Name : Supplying heavy gauge PVC Conduit Pipe.mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary.25mm dia 2mm thick 0 0.00
Unit : Mtr 0 0.00
5 Item Code : Vol 6, Item no-2.2.1 269 4 No --- 1076 3.2 0.00
Item Name : Point wiring using Copper wire with out switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2 X1.5Sq.mm (Phase&Neutral) &1x1.0 Sqmm(earth Wire)Cable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Short point upto3mtr from tapping point to out let via Switch 0 0.00
Unit : Point 0 0.00
6 Item Code : Vol 6, Item no-2.2.2 379 6 No --- 2274 4.8 0.01
Item Name : Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch 0 0.00
Unit : Point 0 0.00
7 Item Code : Vol 6, Item no-2.2.3 555 8 No --- 4440 6.4 0.01
Item Name : Long point above 6Mtr upto 10Mtr from tapping point to out let via switch box 0 0.00
Unit : Point 0 0.00
8 Item Code : Vol 6, Item no-2.3.2 26 80 No --- 2080 64 0.01
Item Name : Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade,1.5 SQMM multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & confirming to GTP. 0 0.00
Unit : Mtr 0 0.00
9 Item Code : Vol 6, Item no-2.3.3 42 80 No --- 3360 64 0.01
Item Name : Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade,2.5 SQMM multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & confirming to GTP. 0 0.00
Unit : Mtr 0 0.00
10 Item Code : Vol 6, Item no-2.3.4 63 60 No --- 3780 48 0.01
Item Name : Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade,4 SQMM multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & confirming to GTP. 0 0.00
Unit : Mtr 0 0.00
11 Item Code : Vol 6, Item no-3.4.6 319 4 No --- 1276 3.2 0.00
Item Name : Supplying and flush mounting powder coated / galvanized metal box size10-12way suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 0 0.00
Unit : Each 0 0.00
12 Item Code : Vol 6, Item no-3.5.6 344 4 No --- 1376 3.2 0.00
Item Name : Supplying and fixing superior quality 10-12Mudular modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metalbox. 0 0.00
Unit : Each 0 0.00
Item Name : Supplying and fixing of 6Amps 0ne way modular switch on existing modular switch plate as per IS 3854 and IS 1293. 0 0.00
Unit : Each 0 0.00
14 Item Code : Vol 6, Item no-3.6.3 171 6 No --- 1026 4.8 0.00
Item Name : Supplying and fixing of 6Amps 3way modular Socketc on existing modular switch plate as per IS 3854 and IS 1293. 0 0.00
Unit : Each 0 0.00
15 Item Code : Vol 6, Item no-3.6.4 357 4 No --- 1428 3.2 0.00
Item Name : Supplying and fixing of modular stepped electronic fan regulator on existing modular switch plate as per and IS 1293. 0 0.00
Unit : Each 0 0.00
16 Item Code : Vol 6, Item no-5.18.4 739 2 No --- 1478 1.6 0.00
Item Name : Supplying and fixingof 6to32 Amps Double pole miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 0 0.00
Unit : Each 0 0.00
17 Item Code : Vol 6, Item no-12.56 3510 2 No --- 7020 1.6 0.02
Item Name : Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should be filled with equal proportion of salt and charcoal 150 mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per lSI specification 7.3.3. of IS 732 using 12 mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia 0 0.00
Unit : Each 0 0.00
Item Name : Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system. 48" Sweep (1200mm) Regular model 0 0.00
Unit : Each 0 0.00
Item Name : LED Indoor Supplying of 1x4' feet - LED PVC Square Batten 20/22W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI more than 80. Power Input: 220-240V @ 50Hz & Power factor more than 0.9 along with CE approved drivers. 2 years Warranty against any manufacturing defect working under standard electrical condition 0 0.00
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
government notification BC LOC letter to be issued by the Bank.pdf
Others - LOC Format • 1.73 MB
buildingspecification.pdf
Others - Building Specification • 0.87 MB
bid document kw-4 wi 34272 CALL 2.docx
Tender Document • 1.16 MB
Electrical works specification.doc
Others - Electrical works specification • 0.18 MB
34272.xlsx
Others - Qty Format • 0.30 MB
Star Rate Circular.pdf
Others - Star Rate Circular • 0.78 MB
Download all tender documents and submit your bid