PERIODICAL SERVICES INCLUDING WELCOME MAINT TO OFFR MD ACCN AND OTM ACCN AT FORT AREA NAGPUR UNDER GE KAMPTEE

Amount

Material and labour for preparation of new plastered/complete removal of existing surfaces of walls apply distempering 2 or more coat with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed at any height incuding necessary scaffolding. Note : Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer.

Material and labour for waterproof/weather proof cement based putty @ 1 Kg(undiluted) per sq mtr. of average thickness 1 mm over the new plastered/old painted wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above to make the surface free from dust etc. by skilled labour as per following steps:- Step 1) Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. Step 2) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with a maximum pressure 3300 PSI. Step 3) Allow 6-8 hrs time to dry the putty surface.

Material and labour for one coat of acrylic water based exterior grade primer @0.9 ltr (undiluted)/10 sq mtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI Allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed at any height incuding necessary scaffolding.

Material and labour for two coat water based premium acrylic smooth exterior emulsion of approved colour with silicon additive & Color stay Technology, Excellent Dirt Pick up resistance with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti Algal properties in two coats @ 1.79 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface in both the coats of paint after complete removal of existing surface/plastered surfaces.complete all as directed. Make - Nerolac Excel Top guard (10 years product warranty)/ Asian Paints Ultima Protek (10 years product warranty)/ Berger weather coat long life 10 (10 years product warranty) at any height incuding necessary scaffolding.

Material and labour for two coats of smooth interior acrylic emulsion with rich matt finish having VOC less than 50 grams per ltr complying LEEDS criteria @1 ltrs(unndiluted) /10 sq mtrs diluted with water in 2:1 ratio applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface in both the coats of paint after complete removal of existing surface/plastered surfaces as per manufacturer instructions complete all as directed at any height incuding necessary scaffolding. Note : - Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. Proper masking to be carried out before primer and paint application).

Complete removal of existing treatment on wall/ roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean,free from dust, loose paint etc by skilled labour complete all as specified and directed at any height incuding necessary scaffolding.

M&L for Preparing of old decorative surface of wall and applying one coat of Oil Bound distemper complete all as specified and directed. Note:- Applied By Roller only.

M&L for Preparing of old decorative surface of ceiling and applying one coat of Oil Bound distemper complete all as specified and directed. Note:- Applied By Roller only.

M&L for Preparing of old decorative surface of wall and applying two coat of Oil Bound distemper complete all as specified and directed. Note:- Applied By Roller only.

M&L for complete removal of existing treatment of wall and applying two coats of oil bound distemper over coat of primer and 1mm thick wall care putty complete all as specified and directed. Note:- Applied By Roller only.

M&L for brooming down surfaces of any description and applying one coat of white wash on old decorated surfaces of walls including preparation of old surfaces & filling cracks and holes etc complete all as speciifed and directed.

M&L for brooming down surfaces of any description and applying two coat of white wash on old decorated surfaces of walls including preparation of old surfaces & filling cracks and holes etc complete all as speciifed and directed.

M&L for brooming down surfaces of any description and applying two coat of white wash on old decorated surfaces of ceiling including preparation of old surfaces & filling cracks and holes etc complete all as speciifed and directed.

M&L for complete removal of existing treatment of wall and applying two coats of Royal emulsion over coat of primer and 1mm thick wall care putty complete all as specified and directed. Note:- Applied By Roller only.

M&L for Preparing Old painted surfaces of wall and applying one coat of cement base paint complete all as specified and directed. Note:- It includes cost of vegitation, plants etc remove if any on the wall surfaces.

M&L for complete removal of existing treatment of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed.Note:-It includes cost of vegitation, plants etc remove if any on the wall surfaces.

M&L for one coat of synthetic enamel paint on old painted wooden surface including preparation of surfaces complete all as specified and directed.

M&L for complete removal of existing treatment of wooden surface and applying two coats of wooden polishing over a coat of wood filler (primer) complete all as specified and directed.

M&L for preparation old steel and iron surface not otherwise described over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old plastered or unplastered surface of any desciription exc 10 cm width or girth and applying one coat of weather shield paint (Apex) complete all as specidied and directed. Note:- It includes cost of vegitation, plants etc remove if any on the wall surfaces.

M&L for complete removal of existing treatment of wall and applying two coats of weather shield paint (Apex) over a coat of primer complete all as specified and directed. Note:-It includes cost of vegitation, plants etc remove if any on the wall surfaces.

Material and labour for dampness rectification on affected wall area with following specification/ procedure complete all as specified and directed :- (a) Surface preapation : Removing existing putty/ plaster/ POP from the affected wall surface with wire brush/ grinder/ hammer etc up to brick level. (b) Surface coating: Applying two coats of anti-fungal, acrylic waterproofing coating of Dr Fixit Pidifin 2k , Asiain , Berger or equivqalent in CICO/ STP over cleaned surface and allowing it to dry for 24 hours . (c) Finishing the surface: Applying plaster and putty over the treated surface mixed with waterproofing compound to provide proper finish after that painting can be done after proper curing.

Material and labour for dampness rectification on affected wall area with following specification/ procedure complete all as specified and directed :- (a) Surface preapation : Preparation of old treated surfaces of affected wallwith wire brush/grinder/hammer etc (b) Surface coating: Applying two coats of anti-fungal, acrylic waterproofing coating of Dr Fixit Pidifin 2k, Asian, Berger or equivqalent in CICO/ STP over cleaned surface and allowing it to dry for 24 hours . (c) Finishing the surface: Applying putty over the treated surface with waterproofing compound mixed with putty to provide proper finish after that painting can be done.

M & L for roof coating with three coat of Berger or Asian Paints or equivalent smartcare Dampproof Ultra (1st coat with 30 % Dilutaion , 2nd & 3rd coat undiluted with 4-5 Hrs gap in each coat) over a coat of Asian Paints Smart care repair polymer( High performance SBR based Binder) mixed with cement ratio of 1:4:7 (Repairs Polymer: Water : Cement) applied paints authorised applicator complete all as specified and directed. The application is to be applied by a Berger , Asian or equivalent authorised aplicator complete all as specified and directed.

Material and labour for application of one coat of exterior emulsion paint any colour as approved by GE over old decorated wall surfaces (projections of column/ wall/ edges of chajja roofs and other narrow location in buildings for ground plus two and three floors) after necessary preparation complete as specified and as directed. Note: Provision of all safety measures like instruments, insurance of workers etc are contractor's responsibility.

All as per item No 25 here-in- before but for buildings upto height of 7.5 metre including staging .

All as per item No 25 here-in- before but location of RCC overhead tank surfaces including staging from 7.50 M upto 15m height.

All as per item No 25 here-in- before but location of RCC overhead tank surfaces staging above 15m height.

Taking down cement plaster of any description including racking out joints hacking for key, scrubbing down with water etc.

M&L Rendering 10 mm thick internal using cement plaster in CM 1:6 on fair faces of brick/concrete work surfaces to be finished even and smooth (without using extra lime or cement complete all as specified and directed..

M & L Rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM (1:4) finished fair and even all as specified and directed.

M & L for 5mm thick rendering on fair faces of brick work or concrete surfaces in CM ( 1:3 ) finished even and smooth (without using extra lime or cement) on Ceiling complete all as specified and as directed.

M&L for preparing newly plastered surfaces and applying two coats of oil bound distemper over a coat of chalk whiting, white primer complete on walls

M&L for two coats of cement base paint over a coat of white wash on new plastered surfaces including preparation of surfaces.

Material and labour for applying two coats of oil bound distemper on ceiling over a coat priming paint including preparation of new surfaces complete all as specified.

M&L for Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed.

S&F wire netting of galvanised steel wire 0.71mm dia and size of mesh is 12mm fixed with tinned tacks of wire staples for repair of cracks at various location in wall, beam, chajjas, facia , slab , lintel etc including taking down plaster of craked portion and making good the area by rendering 15mm thick in CM 1:4 complete all as specified and directed.

M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in cills, Chajja, steps, seismic and other similar bands, plinth courses, lacing courses parapets and railing upto 60cm height, copings, kneelers, bed plates, hold fasts block, filling on pressed steel door/ frame etc complete all as specified and as directed.

Disconnecting existing tanks of capacity exc 250 & not exc 500 ltrs, setting aside (or lowering if required) for repairs, cleaning, etc and hoisting if required reconnecting and re- fixing in poistion including cleaning and removing all the scale and dirt, etc from tank from months of circulating pipes etc and writing the date as " Tank Cleaned on 15 APR 2023" white or black thick syntetic enamel paint complete all as specified and as directed.

All as per Item above but capacity of exc 500 & not exc 1000 ltrs complete all as specified and as directed.

Demolition of cement concrete in ground floor & pavings n.exc 15cm thk (below or above ground level) complete all as specified and directed.

Dismantling floor hearth or wall tilling including cement mortat bedding (but not backaing coat) removing serviceable tiles to store & rubbish off the premises.

M&L PCC (1:4:8) type D2 using 40mm graded aggregate in foundation.

M & L for 25mm thick Cement concrete type B-0, 1:2:4 (12.5mm graded aggregate)complete all as specified and directed.

M&L vitrified ceramic tiles 10 mm thick (square or rectangular) polished, dark shed area of each tile not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in site or colored cement to match over 15mm cement screed bed in cement mortar 1:6 as specified and directed.

M&L vitrified ceramic tiles 10 mm thick (square or rectangular) polished, dark shed area of each tile not exceeding 0.36 sqm in Skirting etc set and including rendering 10mm thick in cement mortar 1:3 complete all as specified and as direted.

M&L vitrified ceramic tiles 10 mm thick (square or rectangular) polished, dark shed area of each tile exc 0.42 but not exceeding 1.0 sqm in floors etc set and jointed in neat cement slurry and pointed in site or colored cement to match over 15mm cement screed bed in cement mortar 1:6 as specified and directed.

M&L vitrified ceramic tiles 10 mm thick (square or rectangular) polished, dark shed area of each tile not exceeding 1.0 sqm in Skirting etc set and including rendering 10mm thick in cement mortar 1:3 complete all as specified and as direted.

M&L joint free colored non skid ceramic tiles 6 to 7 mm thick (square or rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in site or colored cement to match over 15mm cement screed bed in cement mortar 1:4 as specified and directed.

M&L colored glazed ceramic tiles in vertical surface 300x 450x 6-7mm thick set and jointed in neat cement slurry and pointed in site or color cement to match including rendering 10mm thick in cement mortar 1:3 complete all as specified and as direted.

M/L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite with 20mm thick screed bed in CM 1 :6

M&L for chamfering half rounding of edges of cudappa/ granite slab as in platform vertical support and edge poloshing complete all as directed

S&F in repairs bib cock with wall fange all as specified and directed Make : Essco by Jaquar (Cat No:APR-101037) or equivalent complete all a specified and directed.

S&F in Repairs Angular Stop Cock with wall Flange Make : Essco by Jaquar (APR-101053) or equivalent complete all a specified and directed.

S&F in repairs 2 way bib cock with wall fange all as specified and directed Make : Essco by Jaquar (Cat No:APR-101041) or equivalent complete all a specified and directed.

S&F in repair Overhead shower 125 mm dia round shape Single flow (ABS body chrome Plated with Gray Face Plate) with Rubit cleaning System incl shower Arm 240mm long complete all as specified and directed Make : Essco by Jaquar (Cat No- EOS-542 A& ALE-536A) or equivalent

S&F in repairs Wash Hand basin of size 530x445x195mm white including fixing accessories complete all as specified and directed Make : Essco by Jaquar (Cat No- ECS-WHT-601) or equivalent

S&F in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with pIngs including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size410mmx330mmx160mm all a s specified and directed.

S&F in repairs Bowl with cistern for couple WC with PP normal close slim seat cover, Hinges, Fixing accessories and accessories Set, size 395X680X770mm, P/S Trap-180mm/ 220mm (Essco by Jaquar Cat No AIS-WHT-101751S220NPPSM/ AIS-WHT-101751P180NPPSM) or equivalent complete all a specified and directed.

S&F in repairs stainless steel kitchen plate rack of size 36x24x10 Inch complete with fixing arrangement complete all as specified and directed. Make- Prayag / Hindustan / Nirali / Bluestar/Shakti.

S&F Hand shower (health Faucet) with 1 Meter Long Easy Flex Tube in Chrome Finish & wall Hook with NRV (back flow Preventer) all as specified and directed Make : Jaquar (Cat No ALE-ESS-593) or equivalent.

S&F in repairs single lever Basin Mixer without popup waste with 450mm Long braided hoses all as specified and directed. Make : Essco by Jaquar (Cat No:APR-101011B) or equivalent complete all a specified and directed.

S&F in repairs single lever Sink Cock with Swinging spout(wall mounted Model)with wall flange all as specified and directed. Make : Essco by Jaquar (Cat No:APR-101347N) or equivalent complete all a specified and directed.

S&F in repairs Toilet Paper holder fixed to walls with chromium plated (CP) brass screws Make Jaquar (AEC-1151) or equivalent.

S & F PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed.

S&F Soap dish (polycarbide) fixed to walls with chromium plated (CP) brass screws Make Essco by Jaquar (AEC-1133) or equivalent.

S&F in repairs towel rack complete all as specidied and directed. Make- Essco by Jaquar (Cat No:AEC-1181A) or equivalent

S&F in repairs towel Rail complete all as specidied and directed. Make- Essco by Jaquar (Cat No:AEC-1111B) or equivalent

S&F in repairs towel ring complete all as specidied and directed. Make- Essco by Jaquar (Cat No:AEC-1121) or equivalent

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs. 9675.00]

dhanshree enterprises (BID ID -3305638)

M/s Prakash Agencies (BID ID -3300758)