WORK NO. 03 VRINDAVAN ISTHIT ISCON MANDIR KE SAMEEP 03 NAG SEMIMAST LITE LAGANE KA KARYA

Supply and fixing of 12.5 mtr high mast shaft of approved make with rising system hot dip galvanized inside & out side dip, heaving pole sheet thickness 3 mm. Top dia minium 150 mm, Bottom dia 310 mm base plate 25 mm thick suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 luminaries & its control gear boxes 0.75 HP power tool moter, 3 point suspension system with steel wire rope 6 mm dia, double drum winch, including making suitable foundation as per manufature drawing/site requirment along with foundation bolts, nuts, washers, anchor plates etc complete in all respect. PWD SOR 2018 S.I. No. 651

Supply and laying of 16 sqmm 4 core aluminium conductor PVC insulated armoured served sheathed cable 1100 volts grade at a depth of 750 mm. below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. on surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. PWD SOR 2018 S.I. No. 501

Supply and burring of Safe Earthing Electrode T-19 (Hot Dip Galvanized), Length up to 2000mm, outer pipe 50mm, inner pipe 25, terminal Dia 12 mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonry husing (from electrode terminal to switch board, cost of 25 x 3 G.I . strip will be extra) U.P. P.W.D. & C.P.R.I. certified. PWD SOR 2018 S.I. No. 725-A

Supply and laying of 32 mm x 6 mm G.I. strip from earth electrode directly in the ground as required complete in all respect. PWD SOR 2018 S.I. No. 171

S&F of 63 Amp. 415 V metal clad T.P.N. rewireable type switch fuse unit on angle iron bracket complete in all respect. PWD SOR 2018 Si no. 316

Supply and fixing of factory wired integral LED flood light luminaries with die cast aluminium housing built with dirver set suitable for 120 watt. Confirming to IP-66 protection complete in all repect. PWD SOR 2018 S.I. No. 1453 CAT-AAA with five year on site warrenty.