SPECIAL REPAIR TO TO APPROACH PATH, FENCING AND GATE UNDER AGE (I) PACHMARHI

Amount

Excavating in post holes (or similar holes) in hard/ dense soil, each n.exc 0.5 cum, getting out and removing surplus spoil to a distance n.exc 50 m and making good the disturbed surface complete all as specified and directed.

Dismantling of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar ficings, dressed stone work and pre-cast concrete articles complete all as specified and directed.

M&L for brick work with sub class 'B' fly ash bricks, straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified & directed.

M&L for PCC (1:4:8) type D-2 using 40 mm graded crushed stone aggregate as in foundation, filling, mass concrete and sub base of floors, path/ paving, surface channel and drain etc complete all as specified & directed.

M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in lintels upto 1.50M clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railing upto 60cm in height, copings, kneelers, apex stones, bed plates etc and the like including weathering slightly rounded/ chamfered angles with & including necessary use and waste of form work for fair faces of concrete, complete all as specified and directed.

M&L for PCC 1:3:6 type B-1 using 20mm graded stone aggregate as in lintels upto 1.50M clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railing upto 60cm in height, copings, kneelers, apex stones, bed plates etc and the like including weathering slightly rounded/ chamfered angles with & including necessary use and waste of form work for fair faces of concrete, complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate in roof padding, roof kerbs or mud stops, rounded or chamfered on edge including necessary form work if required complete all as specified and directed.

M&L for mild steel round bars 5mm dia, and over as in nib of fencing post, spacers and binders complete all as specified and directed.

M&L for mild steel work conforming to Fe-290 Gde -165 as in nosing to steps including embeding in concrete and screwing etc, wind ties for roof including securing bolts, posts & struts in fencing including cutting top to shape as directed, drilling holes, notching for wire, etc; flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc complete all as specified and directed.

M&L for 5 to 10mm dia mild steel screw bolts (machine made) with hexagonal or square head at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt not exceeding 5 Cm complete all as specified & directed.

S&F in repair Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed complete all as specified and directed.

M&L for mild steel work of sections conforming to Fe.290.Gde-E-165 as in doors or gates of angle or other section with gusset plates, rails, braces, etc, drilled for fixing of steel sheeting or other covering; doors etc to be prepared for hanging or sliding with and including either hooks & hinges or steel hanging door fittings inclusive of steel sheeting, running rails & guides and hanging, fastening & fixing complete all as specified & directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified & directed.

Supply only Chain link MS galvanised fencing, any size or type complete all as specified & directed.

M&L for 100 mm thick PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in sub base of floors, path/ paving etc complete all as specified & directed.

M&L for 60mm thick rubber mould reflective factory made coloured pre cast PCC interlocking paver blocks/ tiles confirming to IS 15658-2006, M-35 designation of section as approved by GE in hard standing, laid dry over & including 50mm thick sand cushion and filling the voids of paver blocks/tiles with dry sand complete all as specified & directed.

M&L for rubber mould factory made coloured cement concrete chequered tiles with grey cement and pigments 250mm x 250mm x 25mm thick, set, jointed and pointed in neat cement slurry in floors, laid over and including 15 mm thick screed bed in CM 1:6 complete all as specified & directed. .

M&L for 10 mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified & directed.

M&L for 15 mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified & directed.

M&L for preparation of new surfaces of iron/ steel of any description over 10 cm width or girth and applying two coat of synthetic enamel paint of colour as approved by AGE(I) over and including a coat of red-oxide primer complete all as specified & directed.

M&L for preparing new plastered or unplastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

Demolition of cement concrete of any description (unreinforced) in ground floors and paving not exceeding 15 cms thickness (below or above ground level) including removal of debris to out side MD land complete all as specified & directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed.

Demolition and breaking up drain pipes (SGSW, AC or RCC) of internal dia 450mm, set in cement mortar complete all as specified and directed.

M&L concrete bed to pipes in PCC (1:3:6) type C2 (using 40mm graded crushed stone aggregate) including packing under and haunching against the sides of pipes after they are laid on slope and tested for 450 mm bore sewer pipe line complete all as specified and directed.

M&L for 450 mm dia of Reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and directed.

S&F rolled mild steel section for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc., conforming to Fe-410-W(Gde-E-250) quality-A , complete all as specified and as directed. Note :- 1. The rates quoted allow for cutting to dead length where required, notching, drilling, fitting, riveting and/or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing and fitting angle cleats, fish plates, gusset plates etc., also for wedging, plumbing, truing up and fixing complete. 2. Truss design shall be got done by the contractor from Government Engineering College/NIT and cost threto is deemed to be included in the unit rate quoted by the contractor against this item

Supply and fix pre-painted galvalume aluminium zinc coating GI based 0.50 mm thick(AZ-150) corrugated steel sheet of any colour having minomum tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws/ L or J type or cranked hook/ bolts as complete all as specified & directed.

S&F of pre-painted galvalume aluminium zinc coating GI based 0.50mm thick(AZ-150) plain steel sheet of any colour having tensile strength of 550 Mpa as in ridges, hips, valley gutters, drip and straight flashings (length & girth as fixed) fixed with self tapping screws complete all as specified & directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) including removal of debrise to out side MD land complete all as specified & directed.

Dismantling of stone slab and tile of any description or thickness of floor , aprons etc laid, bedded and pointed in any mortar including removal of debrise to out side MD land complete all as specified & directed.

Dismantling timber scantling 40 Sqcm and over in section in any position as in framed work complete all as specified and directed.

Dismantling asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings complete all as specified and as directed.

Removing building materials etc. (other than spoil ) to a distance of 1 KM or under, beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) embedded in Concrete any section, including taking out embedded portion and making good disturbed ground complete all as specified & directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and directed.

Dismantling fencing wire mesh, any type complete all as specified and directed.

Schedule of credit amount of Rs. 92,220.00 to be deducted during AOC

M/s arjeet singh ahluwalia (BID ID -3170121)

Dev Enterprises (BID ID -3174529)

PADAMSHRI CONSTRUCTION CO (BID ID -3169438)

DEEPAK JAISWAL (BID ID -3172019)

MODI CORPORATION (BID ID -3165464)

GHASI RAM SAHU (BID ID -3169375)

SHRI KRISHNA CONSTRUCTIONS (BID ID -3165355)