Tender ID

Karnataka

Retender

Works

Other Works

Drilling of new borewell, providing of fixing of pump and motor to provide water supply connection to Snathakothara Balakara Vidyarthi Nilaya, Jnanabharathi, Avarana-1, HIC-1580, Bangalore South Taluk. Under Link Document BCM Buildings Maintenance 2225-00-103-0-40

Rural Development and Panchayat Raj Department

RDPR Division Office Bengaluru Urban | Karnataka

Amount: ₹9.3 LCloses: 1 Oct 2024Closed

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.

Timeline

Published24 Sept 2024
Closed1 Oct 2024
Retendered24 Sept 2024

Cancellation Details

Retendered

RetenderedRetenderedReason: Retendered

Published 24 Sept 2024

Tender Value

₹9.3 L

EMD Value

₹23,250

Closing Date

1 Oct 2024, 9:30 pmClosed

Tender Inviting Authority

Office Inviting Bids

Rural Development and Panchayat Raj Department

Contact Person

H HARISH KUMAR

Office Number

Work Description

Drilling of new borewell, providing of fixing of pump and motor to provide water supply connection to Snathakothara Balakara Vidyarthi Nilaya, Jnanabharathi, Avarana-1, HIC-1580, Bangalore South Taluk. Under Link Document BCM Buildings Maintenance 2225-00-103-0-40

Tender Information

Tender ID

RDPR/2024-25/OW/WORK_INDENT9097

Reference Number

RDPR/2024-25/OW/WORK_INDENT9097

Tender Type

Open

Product Category

Other Works

Form of Contract

Electronic Documents, First(One Cover)

Location

RDPR Division Office Bengaluru Urban

Source Website

Subscribe to view

Documents Required

5 documents required · 5 mandatory

Technical Bid

RequiredAnnual Turnover Certificate - CA with UDIN No. last five years period. 2019-20 to 2023-24

RequiredPWD Registration Certificate- Class III and above

RequiredBalance sheets , profit & loss statement certified by an Registered chartered accountant Unless tender is rejected

RequiredBid capacity

RequiredBidder Should upload tie-up agreement - availablity by owning borewell Drilling rig with 7 A Registration certificate or contractor should tie-up with Borewell rig owner who has 7 A Registration Certificate for drilling borewell.

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Submission of insufficient documents required for Qualification of tender document as per K.W.1 of SBD will be technically dis-qualified

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

PWD Department Registration Details

If the tenderers who have been failed to complete the work within the stipulated period in this Division pertaining to already entrusted works such tenderers will not entertained

List of existing commitments and ongoing work

List of works for which tenders already submitted

the tender bidders should furnish EMD as stipulated in tender Notification as furnished in Standard tender Bid Document K.W.1

the available tender capacity will be calculated as stipulated in Sec-3 of KW-1 and Corrigendums.

Even though the tenderers meet the above criteria they are subject to be disqualified if they have made any misleading or false representations in the forms statements and attachments submitted in proof of the qualification requirements and or records of poor performance such as abandoning the works not properly completing the contract, inordinate delays in completion, litigation history or financial failures etc and or participated in the previous tender for the same work and had quoted unreasonably high tender prices and could not furnish rational justification

Labour cess will be deducted at 1% from Each Bill of the executed items from the Successful tenderers.

the tenderer shall furnish all requisite details as per Standard Bid tender Document . they must carefully read all the tender conditions as stipulated in I.F.t and K.W.1 and relevant document shall be furnished. Otherwise tenders will be rejected.

Corrigendum pertaining to tender are applicable as per Government Circulars.

Successful tenderer has to make their own arrangement for procurement of all materials and machineries required for the work.

the tenderer should complete the work within the stipulated period, otherwise Security Deposit amount will be forfeited .Action will be taken for black listing of such contractors.

the Photos and Video graphs should be taken before commencement, during execution and after completion of the work in presence of nodal officers

the tenderers who meets all tender conditions stipulated inK.W.1 . are only eligible

the undersigned reserves the Right to accept / reject any/ all tenders without assigning any reason.

the defect liability period on contractor is one year from the date of completion of the work.

Conditional tenders will be rejected.

the work shall be implemented within the grants allotted by the Government.

Contractor has to make their own arrangements for procurement of all materials and machineries required for the work. there is no departmental supply of materials. Contractor should procure materials and as defined in specifications prescribed in ISI and submit necessary quality control certificates from the authorized agencies before execution.

Within 10 days of receipt of the letter of acceptance, the Successful tenderer shall deliver to the employer a security deposit in any of the forms given below for an amount equivalent to 5% of contract price plus additional security for un balanced tenders. Bankers cheque /DD/pay order in favour of EE Panchayath Raj Engineering Division, Bangalore Urban District, Bangalore/Specified small savings instrument pledged to EE Panchayath Raj Engineering Division, Bangalore Urban District, Bangalore otherwise the E.M.D. will be forfeited and necessary action will be initiated against the tenderer as per tender Clause

the Furnished E.M.D. will be released only after successfully execution of the tender Agreement by the successful tenderer or 30 days from the date of submission of tender whichever is earlier.

Each item rates are exclusive of GST 18%. bidder should quote the rates exclusive of GST for each item.

Balance sheets , profit & loss statement certified by an Registered chartered accountant if not uploaded tender is rejected

Bidder Should upload tie-up agreement - availablity by owning borewell Drilling rig with 7 A Registration certificate or contractor should tie-up with Borewell rig owner who has 7 A Registration Certificate for drilling borewell.

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹23,250

Important Dates

Last Activity

24 Sept 2024

Published

24 Sept 2024

Download Ends

30 Sept 2024

BOQ Preview

•

Geophysical investigation at site for sinking borewells for Providing drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner o...

•

sinking of Borewell of 165mm dia clear usingnsuper fast hydaulic rig of capacity 250 PSIG & Above 900CMF & above in all strata includiing over burden upto 20M. Fixing of casing pipes, collars and cap ...

•

Supply of ISI mark 175mm nominal bore, plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, ...

•

Providing and laying at site of work MS casing caps as per IS 1239 (part II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum)...

•

Supply and laying insulated cable on messenger wire using 2 single core wire for a single phase and stringing PVC insulated and PVC sheathed 650 /1100 V class aluminium conductor of sizes upported by ...

•

Providing and fixing MS casing collars as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensi...

•

Providing, supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as 7 per specifications, as pe...

•

Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core 8 (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments x3x6 m...

•

Supply and delivery of brand New gate Valve of 50mm dia size confirming to IS 9:778:1984 with latest amendment with ISI mark. with all lead, lift, loading, unloading, labour, fuel, hire charges of ma...

•

Supply and delivery of new brand best make non return valve of 50mm dia size confirming to IS 10805:1986 with latest amendments with ISI mark. with all lead, lift, loading, unloading, labour, fuel, hi...

•

Supply and delivery of galvanized mild steel tubes of 6mtr standard length heavy duty (C Class) as per IS 1239 (Part-1) 1990 with latest amendments with ISI Mark (one end fitted with Heavy Duty collar...

•

Work of supply and fixing of 40 amps star delta panel Boards upto 15Hp backwash pump motor as specified below: a. Supply and fixing of new upto 15 Hp star delta starter panel board for back wash motor...

•

Earthing: Supplying and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of sa...

•

Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well cap...

•

Labour charges for erection of indoor type panel board and meter board units with all necessary materials and labour tools and equipments including cement concrete for 15 foundation/bed etc,complete a...

•

Supply and delivery at site wrought middle steel (galvanized) GI bend

•

confirming to IS 1239-II, 1991 with latest amendments if any. 50mm Gl bend. with all lead, lift, loading, unloading, labour, fuel...

•

Supplying heavy gauge PVC conduit pipe 32 mm dia2.5mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The c...

•

Supplying of 32 Amps TPST with rewirable porcelain channels in SM enclosure. Made out 18 of 145WG powder coated paint of approved colour. with all lead, lift, loading, unloading, labour, fuel, hire ch...

•

Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit/casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated...

•

Supplying 6A flush type socket and 6 A flush type SP switch either surface/flush 20 mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring us...

•

Wiring for lighting/power circull using one of FRLS PVC insulated 1100V grade, 21 multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified...

•

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C. Group B. with all lead, lift, loading, unloading, labour, fuel, hire charges...

•

Supplying and fixing MCB on existing MCB distribution boards using necessary fung 24 materials and type curve indicator ON/OFF energy cross-3 with short circuit breaking capacity of 10K and complete w...

•

Supplying and Fixing 50mm class A GI pipe up to 4.5 ms. long with a reducing collar of 50x40mm to which, an extension of 250 mm pipe is fixed for 125 or 250/400 W MV/Sodium vapour street light fitting...

•

Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, includ ing setting out, shoring, strutting, barricading, caution light...

•

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

•

Providing and Fixing chlorinated Polyvinyl chloride (CPVC) pipes having thermal stability for hot &cold water supply including all CPVC plain &brass threaded fittings This includes jointing of pipes 2...

•

Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end)40 mm nominal bore. with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, ...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

KPPP-kw-1-9097.docx

Tender Document • 1.85 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Tender ID

Karnataka

Retender

Works

Other Works

Drilling of new borewell, providing of fixing of pump and motor to provide water supply connection to Snathakothara Balakara Vidyarthi Nilaya, Jnanabharathi, Avarana-1, HIC-1580, Bangalore South Taluk. Under Link Document BCM Buildings Maintenance 2225-00-103-0-40

Rural Development and Panchayat Raj Department

RDPR Division Office Bengaluru Urban | Karnataka

Amount: ₹9.3 LCloses: 1 Oct 2024Closed

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.

Timeline

Published24 Sept 2024
Closed1 Oct 2024
Retendered24 Sept 2024