Improvement Estimate for providing New 11KV Thiruvithamcode Feeder with ACSR 7 4 09 and strengthening of conductor in existing 11KV Kuzhithurai Feeder ACSR 7 3 35 into ACSR 7 4 09 conductor fed from Thuckalay substation

UDAY scheme works

Loading & Unloading of 9 m PSC Pole

Transporting of 9m PSC pole upto 1 km from roadside to pole pit by handcart.

Excavation & Erection of 9 m PSC pole on rocky ground with base plate

Erection of V cross arm 3*1/2

Erection of HT L clamp

Erection of Three phase Cross arm

Erection of Single phase Cross arm

Erection of Guarding x arm

Providing Flat guarding 2 Wire(Excluding X arm fixing charges)

Erection of Tapping channel

Erection of Stay set

Fixing of Insulator

Alteration of clamps

Dismantling and Redoing of street light Fittings

Dismantling and Redoing of street light control box

Stringing of ACSR 7/4.09 Conductor

Providing slotted holes on V crossarm , L Clamp , Guarding Xarm & Tapping Channel etc etc

Tree Branch clearance

Erection of Pole Earth

Dismantling and redoing of Three phase Service wire

Dismantling and redoing of Single phase Service wire

Dismantling and redoing of Three phase Cross arm

Dismantling and redoing of Single phase Cross arm

Dismantling of HT line ACSR 7/3.35 Conductor

Transporting of materials from section office to workspot by handcart.

Concreting of pole as per Board Standards (2'*2'*5'). The material such as sand, jelly, etc., have to be supplied by the contractor including Cement(Cement concrete mix 1:4:8 using 40mm hard broken stone including cost of labour charges.for placing Transporting of sand,jelly,from box and water curing for 14 days etc,.complete.

Coping of pole (0.6m*0.6m*0.35m)Including cement and materials

Concreting including materials for Guy sets (0.3m x 0.3m x 1.5m)