SPECIAL REPAIR TO TECHNICAL STORES BUILDING NO T 20, T-21, T-22 AND T-38 (TOILET, BATHROOM FOR OR LIVING ACCN) IN THE AOR OF AGE B/R-1 UNDER GE KHUMBATHANG

Amount

Demolition of brick work or stone/ boulder/PCC block masonry, built in cement mortar including all quoins, pillars etc.complete all as specified and directed by Eng-in-Charge.

Taking down cement plaster on brick or stone etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Eng-in-Charge.

Demolition of cement concrete in ground floors and paving n exc 15 cm thickness (below or above ground level) complete all as specified and directed by Eng-in-Charge.

M & L 40 mm thick cement concrete type B-0, 1:2:4 (12.5mm graded crushed stone aggregate) as in sub base to floor complete all as specified and directed by Eng-in-Charge.

Rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 is to be finished even and smooth (with out using extra cement) complete all as specified and directed by Eng-in-Charge.

M&L for Pre-cast cement concrete block masonry type C-1 1:3:6 (using 16mm graded crushed stone aggregate) with solid blocks exc. 10 cm in width and setting in cement mortar 1:6 , complete all as specified and directed by Eng-in-Charge.

Material and labour non skid colour ceramic tiles of 7 to 8 mm thick (square/rectangular) area pf each the exceeding 0.11 sqm but not exceeding 0.18 sqm of approved 1st quality in floors including 15mm thick screed bed in cement mortar 1:6 set and jointed in neat cement slurry and pointed with white / coloured cement to match coloured tiles complete all as specified and directed by Eng-in-Charge.

M&L for machine cut kota stone slab flooring 20-25 mm thick over&including 15mm thick screed bed in cement mortar 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and mirror polishing complete all as specified and directed by Eng-in-Charge.

Taking down shutters exc 1.0 Sqm and not exc 2 sqm each complete all as specified and as directed by the Engineer-in-Charge

Supply and fixing of 40mm thick flush shutters,solid core construction and both faces covered with decorative veneer wirh lipping/frame to match complete all as specified and directed by Eng-in-Charge.

Supply and fixing of Mild steel barrel tower bolts,stove enamelled black with bright bolt and fixed (150mm length of bolt) complete all as specified and directed by Eng-in-Charge.

Supply and fixing of Mild steel sliding door bolts,plate type,stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts four on bolt plate and two on staple plate and fixed.(250mm length of bolt) complete all as specified and directed by Eng-in-Charge.

Supply and fixing of butt hinges heavy weight cold rolled mild steel and fixed (100mm) complete all as specified and directed by Eng-in-Charge.

Supply and fixing for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws/reviting/welding as required complete all as specified and directed by Eng-in-Charge.

Preparation new or previously untreated wood surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Eng-in-Charge.

Preparation old painted steel and iron surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed by Eng-in-Charge.

Taking up or down steel tubing and connections 15mm bore of pipe, including cleaning for refixing or removal to store complete all as specified and as directed by the Engineer-in-Charge.

Taking up or down steel tubing and connections 20mm bore of pipe, including cleaning for refixing or removal to store complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing of steel water tubing 15 mm bore medium grade galvanized with all fittings such as bends, tees, nipples, elbows, reducers, etc, fixed complete to walls and ceilings or laid in floors complete all as specified and directed by Eng-in-Charge.

All as per item No 19.00 above but 20mm dia complete all as specified and directed by Eng-in-Charge.

Supply and fixing of 1000 Ltr capacity Rotational moulded polye?thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including dismantling existing water tanks and removing to store complete all as specified and directed by Eng-in-Charge.

Supply and fixing of 500 Ltr capacity Rotational moulded polye?thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including dismantling existing water tanks and removing to store complete all as specified and directed by Eng-in-Charge.

Supply and fixing of 20mm Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle,screwed both ends for iron pipe or for complete all as specified and directed by Eng-in-Charge.

Supply and fixing of Ball valves 15mm dia high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms) and fixed in repairs complete all as specified and directed by Eng-in-Charge.

Supply and fixing in repair vitreous china ware wash hand basin padastal pattern 550mm x 400 mm size flat back or angle including new bracket and making good all connections in repairs complete all as directed by the Engr-in-Charge.

Supply and fixing of 32mm Dia PVC waste pipe for sinks or wash basines etc,. in repairs complete all as directed by the Engr-in-Charge.

Supply and fixing of 32 mm dia bore waste fittings brass chromium plated fixed to wash hand basin/urinals with long screwed shanks and fly nuts flange and bedded in run lead cement and other end fixed in repairs complete all as directed by the Engr-in-Charge.

Supply and fixing in repair 15 mm bore piller cocks fancy type,cast copper alloy,with capstan heads,chromium plated,screwed down, fancy type high pressure, with or without lettred 'HOT or COLD' with long screwed sunk and fly nuts. complete all as specified and directed by Eng-in-Charge.

Supply and fixing in repair Bib taps, cast copper alloy, chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule 15mm dia and fixed complete all as specified and directed by Eng-in-Charge.

Supply and fixing of 15mm bore angle valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repair complete all as specified and directed by Eng-in-Charge.

Supply and fixing of PVC connection15 mm bore LDPE pipe 45cm long with brass nuts and washers on both ends all as in repairs complete all as specified and directed by Eng-in-Charge.

Supply and fixing in repair Vitreous China squatting pan of pattern “Orissa pattern”, size 580x440 mm white with ‘P’ or ‘S” trap, front or back inlet and foot rests, any pattern n including connection to trap,and to flushing pipe, anti-syphonage pipe,etc. complete including making good to floor (excluding flushing cistern and flush pipe) complete all as specified and directed by Eng-in-Charge.

Supply and fixing in repair 10 Litre capacity PVC low level flushing cistern with ball valve and handle/push button 32mm dia PVC flush pipe including taking down unserviceable cistern complete all as specified and directed by Eng-in-Charge.

Supply and fixing of vitreous china wash down water closet pan (Pedestal type), white including removing the existing one complete and making good all connections as in repairs all as specified and directed. complete all as specified and directed by Eng-in-Charge.

Supply and fixing in repairs white /black plastic seat cover anglo indian type/ IWC type solid confirming to ISI any type complete all as specified and directed by Eng-in-Charge.

Supply and fixing of towel Rail 600mm long 20mm dia,D type cromium plated, fixed with and including Chromium plated brass screws and wooden/plastic cleats and fixed in repairs complete all as specified and directed by Eng-in-Charge.

Supply and fixing of sheet glass shelf assembly consisting of 5.5 mm thick sheet galss shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed by Eng-in-Charge.

Supply and fixing of 75 mm dia PVC (SWR) floor trap plain with grating doom with or without hole as directed including jointing to waste pipe fixed in solvent cement or cement concrete 1:2:4 type B-1 complete all as specified and directed by Eng-in-Charge.

Demolition/Dismantling of drain pipes any type at any position complete all as specified and directed by Eng-in-Charge.

Supply and fixing of 75mm bore PVC(SWR) Pipes single socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified and directed by Eng-in-Charge.

Supply and fixing of 110mm bore PVC(SWR) Pipes sinle socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified and directed by Eng-in-Charge.

Supply and fixing of 75mm bore PVC(SWR) bend complete all as specified and directed by Eng-in-Charge.

Supply and fixing of 110mm bore PVC(SWR) bend complete all as specified and directed by Eng-in-Charge.

Dismantling of Plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed by Eng-in-Charge.

Dismantling wrought iron or mild steel work of any description complete all as specified and directed by Eng-in-Charge.

M&L for Joist, channel, angle, or tee sections,Fe-410-W(Gde?E-250)quality fixed independently, with or without connecting plates,in roof,wall etc complete all as specified and directed by Eng-in-Charge.

Taking down chowkats or frame with shutters with any specification ( without taking off shutter from frame ) n exc 1.50Sqm each complete all as specified and directed by Eng-in-Charge.

Taking down chowkats or frame with shutters any specification ( without taking off shutter from frame ) 1.50Sqm and n exc 4.0 Sqm eachcomplete all as specified and directed by Eng-in-Charge.

Supply and fixing of Pressed steel windows (hollow section) with side hung shutters including projecting type hinges with steel handle,and steel peg stay and 02 Nos tower bolt in each leaf complete with glazing bars dovetailed,welded or fix with nut and bolts complete all as specified and directed by Eng-in-Charge.

Supply and fixing of Steel door including projecting type hinges, steel handle, complete,with glazing bars,locking arrangements, dovetailed or welded complete all as specified and directed by Eng-in-Charge.

Supply and fixing of 4 mm thick, sheet glass ordinary quality and glazing with oil putty in square n exc 0.50 Sqm in each pane complete all as specified and directed by Eng-in-Charge.

Supply and fixing for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Eng-in-Charge.

Rendering 15 mm thick on fair faces(both face) of brick work or concrete surfaces in cement mortar 1:4 is to be finished even and smooth (with out using extra cement) complete all as specified and directed by Eng-in-Charge.

Preparation of new surfaces of walls including cornices and applying two coats of oil bound distemper over a coat of primer, white or tinted complete all as specified and directed by Eng-in-Charge.

Preparation new or previously untreated iron surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Eng-in-Charge.

M&L PCC 1:3:6, type C-1 (40 mm graded crushed stone aggregate ) for plinth protection 75 mm thick, finished without using extra cement complete all as specified and directed by Eng-in-Charge.

Taking down carefully copper/ aluminium point wiring (light, fan, buzzer, socket or power) complete including fixture and fittings such as switches, ceilling roses, pendants , regulators, sockets light fitting etc for taking credit removing from site and making good disturbed surface etc. complete all as specified and directed by Eng-in-Charge.

Material and labour for point wiring with 1.5 sqmm cable FRLS PVC insulated, unsheathed copper multistranded conductor, 1100 V grade of size 1.5 sqmm including necessary termination board 1.5 Sqmm PVC insulated unsheathed FRLS copper conductor as earthing and connected to common earthing with PVC heavy duty casing caping/PVC conduit ISI marked as rquired at site along with all accessories and making good the disturbed surfaces of wall/ ceiling etc for the following item no 59.01 & 59.02 complete all as specified and directed by Eng-in-Charge. : -

One light point/ one fan point/ Bell Point controlled by one switch complete all as specified and directed by Eng-in-Charge.

One 3 pin socket outlet, 5 Amp independent complete all as specified and directed by Eng-in-Charge.

Supply and fixing in repair switch piano flush type single pole one way 6 Amps complete all as specified and directed by Eng-in-Charge.

Supply and fixing in repair socket 6 amp complete all as specified and directed by Eng-in-Charge.

Supply and fixing in repair Ceiling rose 3 plates flush type 6 Amps,250 volts AC ISI marked complete all as specified and directed by Eng-in-Charge.

All as per item No 59.00 above but for point wiring for power point with 2.5 Sqmm FRLS PVC insulated unsheathed copper cable 1100 Volt grade drawn through and including PVC casing caping heavy duty ISI marked /heavy duty conduit ISI marked as required at site alongwith accessories with 2.5 Sq mm FRLS PVC insulated unsheathed copper conductor cable as earthing and connected to common earth complete all as specified and directed by Eng-in-Charge.

Supply and fixing in repair switch socket combination switch socket outlet 3 pin, 16 amp flush type complete all as specified and directed by Eng-in-Charge.

Supply and fixing in repair wall mounted LED light fitting 1x20 watts AC decorative box type with driver holder including LED tube light , energy efficient type 4 feet long including neccessary conection prewired and making connection with 3 core copper flexible cable of appropriate size from ceilling rose complete all as specified and directed by Eng-in-Charge.

Supply and fixing in repair sheet metal enclosure SPN DB 02 way,single phase 240 volts double door with 200 amp rated bus bar complete all as specified and directed by Eng-in-Charge.

Supply and fixing in repair sheet metal enclosure SPN DB 08 way,single phase 240 volts double door with 200 amp rated bus bar complete all as specified and directed by Eng-in-Charge.

Supply and fixing in repair for Circuit breaker single pole, 6 to 32 Amp 240 volt C curve 10 KA, IP 20 including taking down old one complete all as specified and directed by Eng-in-Charge.

Supply and fixing in repair for Circuit breaker single pole & neutral 240 volt C curve 10 KA 32/40 Amps capacity IP 20 including taking down old one complete all as specified and directed by Eng-in-Charge.

Supply and fixing of LED security light fitting 33/45 watts 230 volts AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver,lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed by Eng-in-Charge.

Supply and fixing in repair two single core 6 sq mm for sub Main wiring with copper conductor multistranded PVC insulated and unsheathed 1100 Volts grade in and including PVC casing capping with fixing accessories including one run of 6 Sq mm copper conductor complete all as specified and directed by Eng-in-Charge. (Note - Two runs of 06 Sq mm cable, one run of 6 Sq mm earth cable and one run of PVC casing Capping shall be measured as one running meter.)

Supply and fixing in repair of exhaust fan,steel body AC single phase 230 Volts of size 250/300 mm sweep mettlic body with blades and frame and louvers complete all as specified and directed by Eng-in-Charge.

Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 sqmm 2 core complete all as specified and directed by Eng-in-Charge.

Material and labour earthing complete with galvanized steel earth plate 60 cm x 60cm x 6.0mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of the earth plate at a depth not less less than 1.5 mtr filled around with 15 cm thick alternate layers of charcoal dust and salt and connected to earth lead wire 4mm dia (8 SWG) by means of bolt, nut and check nuts and washers of galvanized iron or steel and thimble and other ends of the earth wire connected to main switch board and protected by galvanized iron pipe light grade 15mm bore and watering pipe 20mm dia light grade with funnel and wire mesh, pcc 1:3:6 type C-1 in chambers RCC 1:2:4 type B-1 in pit cover reinforced with 8 mm dia deformed bars 15cm center to center both ways complete all as shown in electric plate No 3 of MES SSR Part I complete all as specified and directed by Eng-in-Charge.

Deduct Credit for Demolished/Dismantled material Rs (-) 49,279.00 (Minus) as listed in Schedule 'A' Part-II (Credit Schedule) Note : Tenderers will not quote against this item being a tentative amount, to be considered to arrive at the 'Contract Sum'.

M/S TRADE LINK

M/S MOHD HUSSAIN

KASHMIR FAIR DEAL SERVICES