Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.9 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹35.9 L+₹1.6 L (4.64%)Rejected-Finance | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹36.9 L+₹2.6 L (7.51%)Rejected-Finance | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹38.9 L+₹4.6 L (13.5%)Rejected-Finance | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹39.1 L+₹4.8 L (13.9%)Rejected-Finance | L5 | Rejected-Finance Other than lowest |
Tender Value
₹50 L
EMD Value
₹1 L
Closing Date
21 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE West Lucknow
GE West Lucknow, 11 Sardar Patel Marg, lucknow cant-226002
WELCOME MAINT TO THE MD ACCN OF OFFRS AND REPAIRS TO JOINERY AND CUPBOARDS IN ZONE D AREA OF AGE B/R II UNDER GE (WEST) LUCKNOW
2022_MES_529488_1
GE/W/LKO/ 27 OF 2022-23
Open Tender
Civil Works
Item Rate
Lucknow
As per NIT and tender documents
9 documents required · 9 mandatory
₹500
GE West Lucknow
₹1 L
Yes
3 Sept 2022
8 Jun 2022
23 Jul 2022
8 Jun 2022
21 Jul 2022
22 Jun 2022
8 Jun 2022 - 15 Jun 2022
60 days
Amount
Demolition of brick work or stone/ boulder masonary, built in cement mortar or cement lime mortar including all quions, arches, pillars, etc. but excluding ashlar facings, dressed stone work and precast concrete articles etc. complete all as specified and directed.
M&L for brick work with fly ash bricks, old size, straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar 1:6 complete all as specified and directed.
M&L for brick work with old size fly ash bricks of class designation 75, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed.
M & L 15 mm thick rendering in CM (1:6 ) on other than fair faces of brick wall or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.
M & L 15mm thick rendering in CM 1:4 on fair faces of brick wall or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.
Material and Labour for rendering 15 mm thick cement plaster in CM 1:4 with water proofing compund (@ 3% by weight of cement) on fair faces of brick work or concrete surface and finishing the surface even and smooth without using extra cement all as specified and directed. (Note:- Water proofing compound shall be measured and paid seprately.)
Supply only integral water proofing compound conforming to IS 2645 complete all as specified and directed.
Taking down cement plaster or cement lime plastering , any description from brick wall including racking out joints hacking for key scrubbing down with water etc and M & L 15 mm thick rendering in CM (1:6 ) on other than fair faces of brick wall or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.
Taking down cement plaster or cement lime plastering , any description from brick wall including racking out joints hacking for key scrubbing down with water etc and M & L 15mm thick rendering in CM 1:4 on fair faces of brick wall or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises and M&L for non skid ceramic tiles coloured, superior quality 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises and M&L for glazed ceramic tiles (coloured digital glossy of superior quality) 450 x 300 x 7mm/600x300x7mm thick on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10 mm thick rendering (as screed bed) in cement & sand mortar 1:4, complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises and M&L Vitrified Ceramic coloured tiles light shade 8 to 10 mm thick (square/ rectangular) polished, joint free , area of each tiles not exceeding 0.36 sqm sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises and M&L Vitrified Ceramic coloured tiles light shade 8 to 10 mm thick (square/ rectangular) polished, joint free , area of each tiles not exceeding 0.36 sqm sqm, on walls as in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match & including 10mm thick screed bed in cement & sand mortar 1:4, complete all as specified and as directed.
M&L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.& including screed bed or bedding layer 15mm thick in cement mortar 1:4 complete all as specified and directed.
M & L for rounding to edges of stone slab one edge, such as steps and other similar situations complete all as specified and directed.
Taking down steel tubing and connection 15mm bore incl cleaning for refixing or removing from site and Supply, fixing, laying & testing 15 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors and testing complete all as specified and directed.
Taking down steel tubing and connection 20mm bore incl cleaning for refixing or removing from site and Supply, fixing, laying & testing 20 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors and testing complete all as specified and directed.
S&F in repairs long body 15mm bore bib tap, quarter turn, cast copper alloy, chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified & directed.
S&F in repair bib taps 15mm bore, half/quarter turn, fancy type, long body, cast copper alloy, chromium plated, screwed for iron pipe or for brass ferrule including all accessories complete all as specified and directed. Make :- Jaquar Cat part No.CON-107KN or equivalent model of make Kajaria Bathware Pvt Ltd./Cera Sanitaryware Ltd.
S&F in repair stop/angle valves 15mm bore, quarter turn, fancy type, cast copper alloy, chromium plated quarter turn with long shank and cup screwed down, screwed for iron pipe or for unions and fixed complete all as specified and directed. Make :- Jaquar Cat part No. CON-053KN or equivalent model of make Kajaria Bathware Pvt Ltd./Cera Sanitaryware Ltd.
S&F in repair two way angle valves 15mm bore, quarter turn, fancy type, cast copper alloy, matt chrome finish with wall flange, screwed for iron pipe or for unions and fixed complete all as specified and directed. Make :- JaquarCAT NO CON-041KN or equivalent model of make Kajaria Bathware Pvt Ltd./Cera Sanitaryware Ltd.
S&F in repair 15 mm bore single lever basin mixture central hole for WHB system without popup waste system with 450 mm long braided hoses complete all as specified and directed. Make :- Jaquar Cat part No. CON-167KNB or equivalent model of make Kajaria Bathware Pvt Ltd./Cera Sanitaryware Ltd.
S&F in repair wall mixer with provision for overhead shower with 115 mm long bend pipe, connectings legs and wall flanges, fancy type, brass chromium plated, with casted swinging spout including plugging and securing to walls suitable for 15mm bore pipe complete all as specified and directed.
S&F in repair single lever wall mixture 3-in-1 system with provision for overhead shower with 115 mm long bend pipe, connecting legs and wall flange(without over head sower) screwed down for 15 mm bore GI pipe complete all as specified and directed. Make :- Jaquar Cat part No. CON-273KNUPR or equivalent model of make Kajaria Bathware Pvt Ltd./Cera Sanitaryware Ltd.
S&F in repair fancy type brass chromium plated towel ring with round flange complete all as specified and directed. Make :- Jaquar Cat part No. AQN 7721 or equivalent model of make Kajaria Bathware Pvt Ltd./Cera Sanitaryware Ltd.
S&F in repair toilet paper holder, superior quality, fancy type, brass chromium plated with flap complete all as specified and directed. Make :- Jaquar Cat part No. AKP-35753P or equivalent model of make Kajaria Bathware Pvt Ltd./Cera Sanitaryware Ltd.
S&F in repair overhead shower rose with arms 450 mm long, 100MM round shape, single flow, ABS body chrome plated with grey face plate with rubit cleaning system, suitable for 15mm bore pipe and fixed complete all as specified and directed. Make :- Jaquar(Shower) Cat part No. OHS-1989, Jaquar (Shower Arm) Cat part No. SHA-455L400 or equivalent model of make Kajaria Bathware Pvt Ltd./Cera Sanitaryware Ltd.
S&F in repair hand shower (health faucet), superior quality, round shape, single flow, brass chromium plated, with 1m long flexible pipe with wall hook bracket etc. and all fittings for EWC complete all as specified and directed. Make :- Jaquar Cat part No. ALD-565 or equivalent model of make Kajaria Bathware Pvt Ltd./Cera Sanitaryware Ltd.
S&F in repair 5.5mm thick sheet glass corner shelf assembly, fancy type, sheet glass shelf of size 250x250mm, with CP bracket guard and railing, fixed to wall with PVC gully and CP brass screws complete all as specified and directed.
S&F in repair 5.5mm thick sheet glass shelf assembly, fancy type, sheet glass shelf of size 600mm long and 120mm wide with CP bracket guard and railing, fixed to wall with PVC gully and CP brass screws complete all as specified and directed.
S&F in repair vitreous china full pedestal Wash basin, white, flat back of size 620x480mmx185mm including CP waste coupling and 32mm dia waste pipe etc. complete all as specified and directed. Make :- Jaquar(Fonte) Cat part No. FNS-WHT-4081 & pedestal FNS-WHT-40801or equivalent model of make Kajaria Bathware Pvt Ltd./Cera Sanitaryware Ltd.
S&F in repair Vitreous China wash down water closet pan, pedestal pattern, white, cascade type with built in flushing cistern and plastic water closet seat cover, white, complete all as specified and directed. Make :- Jaquar(Fonte) Cat part No. FNS-WHT-40751P180UFSM & CISTERN FNS-WHT-40201or equivalent model of make Kajaria Bathware Pvt Ltd./Cera Sanitaryware Ltd.
Supply and Fixing in repair Gun-metal, globe or gate valves 20mm bore with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.
S&F in repairs PVC valveless symphonic action type low level flushing cistern (ISI marked) of 10 litre capacity including 32 mm dia PVC flush pipe connected to water closet with inlet, ball valve, float and handle complete all as specified and directed.
S&F in repair brass chromium plated overhead shower rose with arms, 100mm dia, round shape, single flow, fancy type, suitable for 15mm bore pipe and fixed complete all as specified and directed.
S&F in repair CP brass tubular towel rail 20mm dia, 'D' type, 600mm long between flanges, superior quality, fancy type, fixed to wall with PVC gully and CP brass screws complete all as specified and directed.
S & F in repair looking mirror fancy type decorative pattern 5 to 6mm thick fixed on wall with stainless steel studs complete all as specified and directed.
S&F in repair PVC connection 450 mm long suitable for 15 mm GI pipe with two PTMT nuts & rubber washers complete all as specified and directed.
S&F in repairs vitreous china wash hand basin, white, flat back of size 550mm x 400mm with & including a pair of cast iron brackets embedded in PCC 1:3:6 type C1 blocks of size 10x7.5x15cm, 32 mm dia PVC waste pipe and 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, (excluding tap, waste chain & plug), complete all as specified.
S&F in repair Vitreous China wash down water closet pan, pedestal pattern, white, with 'P' or 'S' trap, excluding flushing cistern and flush pipe, with plastic water closet seat cover, white, closed pattern with flat bottom and cover, fixed with MS chromium plated hinging device including connection to drain pipe (or outgoing pipe) and to flushing pipe etc. and making good to floor complete all as specified and directed.
Supply and Fixing kitchen sink with drainage board, made out of 1mm thick stainless steel sheet with plug, washer, stainless steel waste coupling, PVC waste pipe including bedding in cement mortar, connection to union and drain pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.
Dismantling PVC water tanks and removing for capacity exceeding 250 litres & not exceeding 500 litres etc and S&F 500 litre capacity Rotational moulded polyethylene water storage tanks triple layered (cylindrical, vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. including 15 mm ball valve high pressure of PTMT with apoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and directed.
Dismantling PVC water tanks and removing for capacity exceeding 500 litres & not exceeding 1000 litres etc and S&F 1000 litre capacity Rotational moulded polyethylene water storage tanks triple layered (cylindrical, vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. including 20 mm ball valve high pressure of PTMT with apoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area n. exc 1.50 Sqm each complete all as specified and directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area exc 1.50 Sqm but n. exc 4sqm each complete all as specified and directed.
Taking down shutters of any description exc. 1 Sqm but not exc. 2 Sqm each complete all as specified and directed.
M&L Cement Concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in roof kerbs, benching, copings, padding, kneelers, bed blocks, hold fast and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and directed.
M & L for mild steel work as in bands, straps, clamps , hold fasts, wall tiles, plain angle cleats for securing purlins to wood trusses or rafters, and similar small articles confirming to Fe-290 Gde -E-165 complete all as specified and directed.
S&F in repair Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.
M&L for 2nd class hard wood (Sal) plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and directed.
M&L 30 mm Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
Supply and fixed 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepare to receive glass, gauge etc (divided into panels with plane sash bars any numbers) edges of framing plain, chamfered or rounded, fitted without sash bars all as specified.
S&F PVC solid door frame of size 50x47mm made out of 5mm thick plain coloured sheet reinforced with MS square tube & with wood grain printed complete all as specified and directed.
S&F Factory made soild PVC profiled panel door shutter 28mm thick with integral skin as frame & 3mm thick high pressure compact laminate on both side of approved colour as infill, with 'C type Gl or 40 x 20 x19 of MS pipe as stiffner & supplying & fixing in frame at site as per specifications & drawing.complete all as specified
M & L for Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ 0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2 +0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories for area not exceeding 2.00 sqm each. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.)
S&F powder coated (minimum thickness of powder coating 50 micron) anodized aluminum window shutter three track sliding type three track section having frame size Bottom with outer 92 x 45.50 x 1.50 (section code 20617), Top & side 92 x 31.75 x 1.50 (section code 20831) and aluminum section of shutter Top & bottom size 40 x 18 x 1.55 (section code 20736), interlock size 40 x 18 x 1.45 (section code 20737) side/middle size 40 x 18 x 1.55 (section code 20738) including necessary joining cleats, glazing clips, glazing clips rubber backing, anodized aluminum snap beading screw anodized aluminum fitting complete and including glazing by using 5 mm thick plain sheet glass and stainless steel wire mesh of dia 0.36 mm and aperture 1.4 mm complete all as specified and as directed. Refer drg No LZ/C-TD/151 sheet No 1/2 and 2/2. Note:- 1. Glazed shutters glass thickness not less than 5.00 mm and SS wire mesh shutter with SS wire mesh as approved by GE shall deemed to be included in quoted rate and No extra payment will be made separately. 2. No extra payment for variation in section will be made for section profiles of higher sizes.
S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) Anodized aluminium frame for doors, windows, ventilators with one or more rebates using 1.50mm thick aluminium section including joining cleat for fixing etc. complete all as specified and directed.
S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) anodized aluminium glazed window and ventilator shutters, side hung/ top hung type without sash bars, with aluminium sections weighing not less than 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as 01 no. 150mm long peg stays, 02 nos. 100mm long hinges type B-21, 01 no. 150mm long tower bolts and 01 no. 125mm long handles complete all as specified
M & L for preparing new steel & iron surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over and including a coat of red oxide primer complete all as specified.and directed.
M&L for preparation of new wood or wood based surface of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
Preparing surfaces of wood and wood based materials, steel and iron work, new or old, of any description and girth, not otherwise described, and treated with tar or coal tar black paint complete all as specified and directed.
S & F Sheet glass 4mm thick figured glass ordinary quality and glazing with rubber bedding etc in suqares n exc 0.5 Sqm in each pane complete all as specified.and directed.
S & F Sheet glass 3mm thick ordinary quality and glazing with rubber bedding etc in suqares n exc 0.5 Sqm in each pane complete including Hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frame including punching or drilling out old glazing pins/spring clips all as specified and directed.
S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire, staples complete all as specified and directed.
S&F in repairs stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire, staples complete all as specified and directed.
S&F 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.
S&F 150mm size extruded aluminum alloy handles, fabricated type, anodised complete all as specified and directed.
S&F 200mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.
S&F 100mm size butt hinges, medium weight, cold rolled, stainless steel and fixed with screws complete all as specified and directed.
S&F 100mm size butt hinges, medium weight, cold rolled, mild steel and fixed with screws complete all as specified and directed.
S & F in repair two(double) legged floor door stopper of aluminum body & tougues anodised with hard drawer steel spring fixed in floor of over all length of cover plate 140mm complete all as specified and directed..
S&F in repairs mild steel helical door spring 300 mm ordinary rat tail rod pattern spring including roller and roller plate complete all as specified.
S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed.
S& F in repair 18/19mm thick ply wood, grade BWR, type BB quality, fixed with screws/nails to timber frame-work, edge chamfered complete all as specified and directed.
S & F 0.9 mm thick decorative laminates type 1 pf surface finish, clour and pattern as approved fixed with synthetic Glue / Adhesive to timber frame/wood work as per manufacturer's instructions, edge chamfered as directed complete all as specified and directed.
S&F continuous (Piano)) hinges mild steel bright finished or electo galvanised, with width of flap 30 mm when open,and fixed with screws complete all as specified and directed.
S&F 100 mm long aluminium anodised, haps and staple, safety type with steel hinges pin including bolts to hinge plate and fixed with srews complete all as specified and directed.
S&F ball catches with 8 mm dia steel ball and brass body and strike plate magnet ball catcher for cup board shutters complete all as specified and directed .
S & F in repairs 32 mm bore Brass chromium plated Waste coupling for wash basin with inlet and outlet screwed for pipe or connections includding necessary packing, union and cap and fixed complete all as specified and directed.
S&F in repair stainless steel 25mm dia curtain rods including brackets and fancy type end knobs, complete, all as specified and directed.
S&F in repair stainless steel grating doom 100mm dia complete all as specified and as directed.
S&F in repairs 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including PVC holding clamps, complete all as specified and directed.
S&F in repairs 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including PVC holding clamps, complete all as specified and directed.
Cleaning the leakage/seepage wall surface by brushing and watering and remove all surface inperfections providing 15mm thick rendering on wall surafce in CM 1:3 mixed with chemical " PIDIPROFF LW of Dr Pidilite or equivalent " as per manufacturer instructions including brushing neat cement slurry two coats with high performance cementitious polymer water proofing coating of Dr fixit WPC or equivalent of thickness 1mm in combination of WPC and cement (1:1.5) by vol and allow it dry completely and making the surface to match with adjoining area complete all as specifed and directed.
M&L for preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified & directed.
M & L for preparation of new plastered surface of wall and applying two coat of oil bound distemper of approved shade/tint over a coat of primer and putty with roller complete all as specified and directed.
M & L for preparation of old treated surface of wall and applying a coat of white wash complete all as specified and directed.
M&L preparation of old surfaces of ceiling and applying one coat of white wash complete all as specified and directed.
M&L for preparation of newly plastered surfaces of wall & applying two coats of cement base paint of approved shade/tint with roller over a coat of primer complete all as specified and directed.
M&L for preparation of old plastered surfaces of wall & applying two coats of cement base paint of approved shade/tint with roller complete all as specified and directed.
M & L for preparation of old treated wood or wood based surface of any description exceeding 10cm width or girth and applying a coat of synthetic enamel paint complete all as specified and directed.
M & L for preparation of old treated steel surface of any description exceeding 10cm width or girth and applying a coat of synthetic enamel paint complete all as specified and directed.
M & L for complete removal of existing treatment of old surface of wall and applying a coat of putty and primer and applying two coats of oil bound distemper of approved shade/tint with roller after preparation of surface complete all as specified and directed.
Demolition of sunken slab floor or WC and Bath including WC trap etc incl taking down loose filling of aggregate in any type and removing where direted and providing water proofing treatment of sunken slab in following manner :- (a) 15mm thick rendering on bottom and vertical sides of RCC slab in CM 1:3 mixed with WP chemical PIDIPROFF LW of Dr Pidilite as per manufacturer's instructions. (b) Cleaning the concrete surface by brushing and watering and remove all surface inperfections. (c) Fixing 40mm dia Pipe 450mm long bottom of the sunken and wraping of bath seal tape on the pipes inserted through walls to floor area and seal it (Bath seal tape product of Dr fixit and grouting around the inserted pipes by pourable Dr fixit bath seal grout as directed. (d) Make angle fillets by mixing sand cement and Dr fixit pidicrete URP on all corners. (e) Brushing neat cement slurry two coats with high performance cementitious polymer water proofing coating of Dr fixit bath seal WPC of thickness 1mm in combination of WPC and cement (1:1.5) by vol and giving upto height 15cm from bottom slab and allow it dry completely. (f) Providing PCC 1:4:8 type D-2 using 40mm graded stone aggregate mixed with WPC of Dr fixit as per manufacturer's instructions in sunken slab over brick bat . (g) Fill the sanitary gaps with Dr. Fixit sealing compounds complete.
Manoj Electricals
M/s J C Oberoi
M/S PAVA ENGINEERS
chandra kaushal supplier
RAJEEV AND ASSOCIATES
PARAMOUNT ENGINEERS
M/S KAUSHIK CONSTRUCTION
EVEREST CONSTRUCTION
m/s durgesh traders & constractions
M/S SWATI CONSTRUCTION
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .