SR TO RB JUDGE HOUSE UNDER MAINTENANCE BOOTH SECTOR 16, CHANDIGARH. (#504 AND OTHERS).

Total Providing and fixing 60mm thick PUF wall Panels continuous line sandwich with 0 40 mm thick TCT PPGI (120 gm, 240 mpa coated sheet of make JSW. Satmax. Lloyd, sintex, Mectec, Rinac (Conforming to IS: 12436) on both side having polyurethane foam of density 40+ 2kg/cum between sheets. The panel sheet shall have corrugated sheet at top having crest of approx 30mm and the bottom shall be plane sheet with ribs. The panel sheets have one meter width and panel length as per length of room without any joint. The panel shall be fixed in tongue and groove joint with help of flashing comprising of PPGI U channels, L- section, end cap, POP revits, screws and other accessories complete in all respect. The PUF shall be CFC free and ozone friendly made with blowing agent will be N- Pantene. The gap at joint shall be filled with silicon sealant of approved brand (Macoy, pidilite or its equivalent). These panels shall be fixed in alignment and plumb complete in all respect to the entire satisfaction to the Engineer incharge Short walls

Providing and fixing 40mm thick PUF celling Panels continuous line sandwich with 0.40 mm thick TCT PPGI (120 gm, 240 mpa coated sheet of make JSW. Satmax. Lloyd, sintex, Mectec, Rinac (Conforming to IS: 12436) on both side having polyurethane foam of density 40± 2kg/cum between sheets. The panel sheet shall have corrugated sheet at top having crest of approx 30mm and the bottom shall be plane sheet with ribs. The panel sheets have one meter width and panel length as per length of room without any joint. The panel shall be fixed in tongue and groove joint with help of flashing comprising of PPGI U channels, L- section, end cap, POP revits, screws and other accessories complete in all respect. The PUF shall be CFC free and ozone friendly made with blowing agent will be N- Pantene. The gap at joint shall be filled with silicon sealant of approved brand (Macoy, pidilite or its equivalent). These panels shall be fixed in alignment and plumb complete in all respect to the entire satisfaction to the Engineer in charge

Providing and fixing 2nd class teak wood (kiln seasoned) chowkhat 4 1/2" x 2 1/4"including cost of corner straps, iron hold fasts, hinges, screws,nails, fevicol etc. and spirit polish of chowkhats. Rate includes the cost of dismantling of all damaged chowkhats and making good the damage to walls plaster and floors as required including, disposal of rubbish to the dumping ground the rate further includes the cost of two coats Spirit polish complete in all respect and to the entire satisfaction of Engineer-in-Charge.

Providing and fixing 35mm thick phenol bounded factory manufactured solid flush door shutter ISI marked with both side 4mm teak ply in the existing chowkhat. The rate includes the cost of all necessary stainless steel fittings and french spirit polish on teak ply complete in all respect to the entire satisfaction of Engineer-in-charge.

Providing and Fixing 35mm thick 2nd class teak wood (kiln seasoned) wire gauge door shutter consisting of 100mm x 35 mm style and top rail 150 mm x 35 mm lock rail 200mm x 35 mm bottom rail wire mesh 22 x 12 mm gauge fixed with 1/2” x 3/4” teak wood (kiln seasoned) beading, incluuding Stainless Steel fittings and french spirit polish, complete fixed in position and in all respect to the entire satisfaction of Engineer-in-Charge.

Providing and fixing 35mm thick second class teak wood (kiln seasoned) wire gauge window shutters consisting of vertical and horizontal styles 75x35mm size with wire mesh 22 x 12mm gauge fixed with 1/2" x 3/4" teak wood beading. The rate further includes the cost of 3" butt hinges stainless steel tower bolts 4", 4" stainless steel handle 2nos, stay 1no, screws, nails etc. I-hook, french spirit polishing two or more coats complete in all respect to the entire satisfaction of Engineer-in-charge.

Providing and fixing 35mm thick 2nd class teak wood (kiln seasoned) glazed window shutters consisting of vertical and horizontal styles 75x35mm size with 4mm thick floated glass pane fixed with 1/2"x3/4" teak wood (kiln seasoned) beading. The rate further includes the cost of 3" butt hinges, S.S. Tower bolts 4", S.S. handles 2 nos. I-hook and two coats of Spirit Polish after preparation of surface (special quality) complete in all respect to the entire satisfaction of Engineer-in-charge.

Providing and fixing 2'-0” deep cupboard /cabinet consisting of 19mm thick commercial board and 6mm thick ply on back side, 4mm thick teak ply pasted on the exposed surface and making shelves in cabinet 0.8mm mica inside canbinet . The rate further includes the cost of lipping, piano hinges, cupboard lock, screws, nails, 2 nos. fancy s.s. handles, 2 nos. magnetic catchers, fevicol and painting two coats over one priming coat and preparation of surface on board and ply surface and spirit polishing on teak ply complete in position as per entire satisfaction of Engineer-in-charge.

Providing & fixing P.O.P. false ceiling at all heights including poroviding & fixing of framework made of special section, power pressed from M.S. sheets and galvanised with zinc coating of 120 gms/sq, (both side inclusive) as per IS 277 and consisting of angle cleat of size 25mm wide x 1.6 mm thick with flanges of 27mm and 37mm, at 1200mm clc, one flange fixed to the ceiling with dash fastener 12.5mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers or 25 x 10 x 0.50mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I chanels 45 x15 x 0.90mm running at the spacing of 1200 mm c'c, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26 mn each having lips of 10.5mm, at 450mm clc, shall be fixed in a direction perpendicular to G.I ntermediate channel with connecting cip made out of 2.64mm dia x 230mm long G.I wire at every junction, including perimeter channels 0.50mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/ partitions with the help of Rawl plugs at 450mm centre, with 25mm long dry wall screws 230mm interval, including laying of P.O.P. ceiling of average thickness 12 to 14mm reinforced with chicken mesh with ceiling sections including the cost of making opening for light fittings/concealed lighting, sound speakers, making suspended acoustical clouds, space for Curtains/ blinds, grills, diffusers, cut outs made with frame of perimeter channels etc suitably fixed by giving required offsets, excluding the cost of painting all complete as per and direction of the Engineer in charge.

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar