EDCH-172/2023-24

Amount

Safe Carriage of following material from Electricty store center Hts to Pit site of work through the Kacha and Pakka road including loading and unloading at the respective ends including the cost of arrangement of labour, T&P, etc. which required for proper completion of work.(Distance 00-50 Kms.)

11 Mtr long STP Poles.

8.5 Mtr PCC Pole

11 KV XLPE.

11 KV X-Arms, weasal conductor, G.I wire,Disc Insulators, Pin insulators, clamps Abc Bunch and other required line material, if any.

Safe Carriage of following from Electricty Store center Hathras to Pit Site of Work through the Kacha and Pakka road loading and unloading at the respective ends including the cost of arrangement of labour, T&P, etc. which required for proper completion of work.(Distance 00-50 Kms.)

25/63/100 KVA T/F

Errection of following Poles including Cutting & Grouting of kharanja/mettalic road/concrete portion while digging pit & complete H.T./L.T. fittings as per RESPO manual and as per direction of Engineer Incharge including the cost of labour, T&P and carrier etc. required for proper completion of work.

11 Mtr long STP Poles.

Double pole complete fitting of PCC/STP Pole

8.5 Mtr long pcc Poles.

Errection and grouting of stays as per RESPO Norms and as per direction of supervising engineer. Grouting material i.e. cement, sand, brick ballast/stone ballast etc. shall be arranged by the contractor at his own cost.

Fixing of earthing rod as per RESPO Norms and as per direction of supervising engineer.

Laying, sagging and stringing and jumpering / binding etc. of new & old ACSR Weasal conductor / GI in 11 KV / LT lines as per RESPO manual and as per direction of supervising engineer.

11 KV XLPE.

ABC Cable

ACSR Weasel conductor

Fixing of Following Accessirious

11 KV Disk Insulator

11 KV Pin Insulator

Number Plate/Danger Board

11 KV TPMO

11 KV X Arms

Guarding Angle

Distribution box

Providing & Fixing I/D & O/D Cable Jointing

LT Incoming Panel

Installation of following T/F on newly constructed double pole in proper alignment direction & making HT/LT connection.

25/63/100 KVA T/F

Guarding of 11 KV line by laying, stringing, sagging and binding of 2 Nos. parallel GI wire 6 SWG after providing, fabrication and fixing of guarding angle and fabrication and fixing of X-guards (Tillis) of GI wire at distance of 3 Mtr.

Installation of extra ''T'' on the erected poles wherever required alongwith all fitting as per direction of supervising engineer including the cost of labour, T&P etc, required for proper completion of work. The "T" pole shall be grouted with cement, sand and brick ballast/stone ballast in ratio 1:4:8 including the cost of material.

R.N. ELECTRICAL WORKS

VINAYAK ELECTRICALS