WELCOME MAINT TO MD/SINGLE OFFICERS ACCN AND PERIODICAL SERVICES TO CERTAIN BLDGS, EXTERNAL AND INTERNAL PLASTER, JOINERY WORKS, PLUMBING WORKS, SANITARY PIPES AND OTHER VARIOUS B/R WORKS IN MD/OTM ACCN AND FINISHES TO BLDG UNDER AGE B/R-I AT GE HADD

Amount

Taking down chowkhats or frames with shutters (without taking off shutters from the frames), area not exceeding 1.5 Sqm each complete all as specified and as directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames), area exceeding 1.5 Sqm but not exceeding 4.0 Sqm each complete all as specified and as directed.

Taking down shutters of any description, area exceeding 1.0 Sqm but not exceeding 2.0 Sqm each complete all as specified and as directed.

S&F Second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube as per specification & drawing, fixed in opening in repairs complete all as specified and as directed.

M&L for mild steel hold fasts, bands, straps, supports or stays for rainwater, brackets/clamps for eaves and valley gutter and similar articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing fixed to door frame complete all as specified and as directed.

S&F factory made solid 20 mm thick PVC moulded panels for sides/back face of cup boards with particle board core, fixed in repairs complete all as specified and as directed.

S&F 35mm thick second class hard wood plain framed, panelled shutter (two panel) with lock rail and panels of timber flat on both sides (feather edged) or 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces, the size of rail and stile as per IS:1003 (Part I), kiln seasoned and chemically pressure treated, fixed to door frame complete all as specified and as directed.

S&F 35mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a), fixed to chowkats complete all as specified and as directed.

S&F flush shutters 40mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides including 6mm thick wooden lipping around the edges of shutter complete all as specified and as directed.

LABOUR ONLY for easing, tightening of wooden shutters of door/window, hinges or handles/knobs/ hasp & staple etc., complete all as specified and as directed.

LABOUR ONLY for easing, tightening of aluminium shutters of door/window, hinges or handles/knobs/ hasp & staple etc., complete all as specified and as directed.

Demolition of PCC block masonry, built in cement mortar including all quoins, arches, pillars etc., but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

M&L for pre-cast cement concrete block masonry with solid blocks made up of (1:3:6) type C1 (using 20mm graded stone aggregate), masonry exceeding 10cm in width and setting in cement mortar (1:6) complete all as specified and directed.

M&L for pre-cast cement concrete block masonry with solid blocks made up of (1:3:6) type C1 (using 20mm graded stone aggregate), masonry not exceeding 10cm in width and setting in cement mortar (1:4) complete all as specified and directed.

M&L for mild steel roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc., conforming to Fe-410-W (Gde E-250) Quality 'B', fixed in repairs complete all as specified and as directed.

Dismantling ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets and grid complete all as specified and as directed.

M&L for anodised aluminium snap grid frame work for false ceiling with size of grid 605mm x 605mm all as specified in SSR Part-I 2009, hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat iron 40x3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long including cutting, drilling, jointing etc., 4mm thick E-boards (Classic) 605mm x 605mm size fixed or laid/ inserted to aluminium frame work with screws and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and as directed.

M&L for 4mm thick AC plain building board, fixed to existing frame work and finally applying two coats of oil bound distemper over a coat of primer including removal of old damaged boarding complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for non-skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular), area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, as in floors etc, laid over and including 15mm thick screed bed in CM (1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L for non-skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular), area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floors etc, laid over and including 15mm thick screed bed in CM (1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L for vitrified coloured tiles 10 mm thick (square/ rectangular), area of each tile exceeding 0.36 sqm but not exceeding 0.42 sqm, as in floors etc, laid over and including 15mm thick screed bed in CM (1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L for glazed ceramic designed coloured tiles in vertical surfaces using size of tiles 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with colour of tile with and including 10mm thick backing coat in CM (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L for glazed ceramic designed coloured tiles in vertical surfaces using size of tiles 300x200x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with colour of tile with and including 10mm thick backing coat in CM (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar

M&L for glossy finished chequered cement concrete tiles 30cm x 30cm x 25mm thick, made of grey cement and pigments, machine pressed as in flooring, set, jointed and pointed in neat cement slurry laid over and including 20mm thick screed bed in CM (1:6) complete all as specified and as directed.

M&L for 18 to 20mm thick granite work (of any type and shade as approved) table rubbed and polished as in steps, jambs, pillars, window cills, cooking platforms, wash basin counters and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over and including 15mm thick cement mortar (1:4) bedding and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing, rounding (chamfering) the edges complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls etc., including raking out joints, hacking for key, scrubbing down with water etc., and removal of debris to outside MD land complete all as specified and as directed.

M&L for rendering 10mm thick in CM (1:6) on fair faces of brick work or concrete, surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 15mm thick in two coats 5mm thick in CM (1:4) mixed with integral water proofing compound @ 3% by weight of cement over 10mm thick in CM (1:6) on fair faces of brick work or concrete, surfaces finished fair and even complete all as specified and as directed. NOTE: Water proofing compound will be measured and paid separately under relevant item of this schedule.

M&L for rendering 5mm thick in CM (1:3) on fair faces of concrete as in ceilings/soffits of shelves etc., surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Supply only integral water proofing compound.

M&L for preparation of old wooden surfaces of any description, not otherwise described, over 10cm in width or girth and applying one coat of synthetic enamel paint of first quality complete all as specified and as directed.

M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10cm in width or girth and applying two coats of synthetic enamel paint of first quality over a coat of pink primer complete all as specified and as directed.

M&L for preparation of old steel and iron surfaces of any description, not otherwise described, over 10cm in width or girth and applying one coat of synthetic enamel paint of first quality complete all as specified and as directed.

M&L for preparation of new steel and iron surfaces of any description, not otherwise described, over 10cm in width or girth and applying two coats of synthetic enamel paint of first quality over a coat of red oxide zinc chrome primer complete all as specified and as directed.

M&L for preparation of old plastered surfaces of walls and applying one coat of distemper oil emulsion complete all as specified and as directed.

M&L for preparation of old plastered surfaces of ceilings and applying one coat of distemper oil emulsion complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of walls of any description and applying two coats of distemper oil emulsion over a coat of alkali resistant primer complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of ceilings of any description and applying two coats of distemper oil emulsion over a coat of alkali resistant primer complete all as specified and as directed.

M&L for preparation of old plastered surfaces of walls by complete removal of existing treatment by scraping, washing, cleaning etc., and applying two coats of distemper oil emulsion over a coat of alkali resistant primer complete all as specified and as directed.

M&L for preparation of old plastered surfaces of walls by complete removal of existing treatment by scraping, washing, cleaning etc., and applying two coats of weather proof antifungal (exterior grade) acrylic emulsion over a coat of primer from the same manufacturer after filling the cracks with filler complete all as specified and as directed.

M&L for preparation of old plastered surfaces of walls by complete removal of existing treatment by scraping, washing, cleaning etc., and applying 2mm thick wall care putty after filling the cracks with filler complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of external walls of any description and applying two coats of weather proof antifungal (exterior grade) acrylic emulsion over a coat of primer from the same manufacturer complete all as specified and as directed.

M&L for preparation of old plastered surfaces of walls by complete removal of existing treatment by scraping, washing, cleaning etc., and applying texture any pattern as approved over a base coat from the same manufacturer after filling the cracks with filler complete all as specified and as directed.

S&F aluminium grill of approved pattern, anodised powder coated, cut to required size and shape, fixed in postion with aluminium beading & frame made of aluminium F-section fixed to aluminium windows/ ventilators, fixed in repairs complete all as specified and as directed.

S&F 19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side with balancing white lamination, fixed with screws to timber frame work in repairs complete all as specified and as directed.

S&F 150mm long aluminium anodised, barrel tower bolts of extruded section, fixed in repairs complete all as specified and as directed.

S&F 100mm size Hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws in repairs complete all as specified and as directed.

S&F 150mm size extruded aluminium alloy handles, fabricated type, anodised, fixed in repairs complete all as specified and as directed.

S&F sliding door bolt, 300mm long, aluminium alloy, anodised, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy, fixed in repairs complete all as specified and as directed.

S&F 100mm size butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised, type B-21, fixed in repairs complete all as specified and as directed.

SUPPLY ONLY 4.0 mm thick sheet glass, ordinary quality and glazing with aluminium glazing clips in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

SUPPLY ONLY aluminium expanded metal fly proof mesh, cut to required size and shape, with 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed.

S&F aluminium expanded metal fly proof mesh, cut to required size and shape, with 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples, fixed in repairs complete all as specified and as directed.

M&L for PVC connections 15mm size with PTMT nuts of length 450mm, fixed in repairs complete all as specified and as directed.

S&F corner glass shelf with brackets, fixed in repairs complete all as specified and as directed. MAKE: JAQUAR Cat part No. AQN-1173 or equivalent in PRAYAG/PARRYWARE

S&F tubular towel rail, brass, chromium plated, 20mm dia, D type, 60cm long between flanges, fixed in repairs complete all as specified and as directed. MAKE: JAQUAR Cat part No. AQN-7711 or equivalent in PRAYAG/PARRYWARE

S&F towel ring (round), brass, chromium plated with round flange, fixed in repairs complete all as specified and as directed. MAKE: JAQUAR Cat part No. AQN-7721 or equivalent in PRAYAG/PARRYWARE

S&F stop valves 15mm dia or bore, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed.

S&F angular stop cock, 15mm dia, cast copper alloy, chromium plated, fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for unions, fixed in repairs complete all as specified and as directed. MAKE: JAQUAR Cat part No. CON-053KN or equivalent in PRAYAG/PARRYWARE

S&F pillar tap, brass, 15mm dia, chromium plated, fancy type with capstan heads, screwed down, high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe, fixed in repairs complete all as specified and as directed. MAKE: JAQUAR Cat part No. CON-021KN or equivalent in PRAYAG/PARRYWARE

S&F bib tap, brass, 15mm dia, chromium plated, fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule, fixed in repairs complete all as specified and as directed. MAKE: JAQUAR Cat part No. CON-107KN or equivalent in PRAYAG/PARRYWARE

S&F two way bib cock, 15mm dia, cast copper alloy, chromium plated, fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for unions, fixed in repairs complete all as specified and as directed. MAKE: JAQUAR Cat part No. CON-041KN or equivalent in PRAYAG/PARRYWARE

S&F soap dish holder, brass, chromium plated, fixed in repairs complete all as specified and as directed. MAKE: JAQUAR Cat part No. AQN-7731or equivalent in PRAYAG/PARRYWARE

S&F health faucet, brass, chromium plated with 8mm dia, 1.0 m long flexible tube with wall hook, screwed for iron pipe or for brass ferrule 15mm dia or bore, fixed in repairs complete all as specified and as directed. MAKE: ZIM Cat part No. 1624A or equivalent in PRAYAG/PARRYWARE

S&F WHB mixer, 15mm dia, cast copper alloy, chromium plated, fancy type, with crutch or butterfly handle, with long shank with central hole screwed down, screwed both ends for iron pipe or for unions, fixed in repairs complete all as specified and as directed. MAKE: JAQUAR Cat part No. CON-167KNB or equivalent in PRAYAG/PARRYWARE

S&F wall mixer, 15mm dia, cast copper alloy, chromiun plated, three way HOT & COLD, heavy duty, fancy type, screwed down for iron pipe or for unions, fixed in repairs complete all as specified and as directed. MAKE: JAQUAR Cat part No. CON-217KN or equivalent in PRAYAG/PARRYWARE

S&F over head shower, 15mm dia, cast copper alloy, chromiun plated, 105mm dia of shower with revolving joints (with body rotation) & 115mm long arm shower with rabit cleaning system including all fittings, screwed down for iron pipe or for unions, fixed in repairs complete all as specified and as directed. MAKE: JAQUAR Cat part No. OHS-1709 or equivalent in PRAYAG/PARRYWARE

Taking up or down 15mm dia steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.

Taking up or down 20mm dia steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.

S&F 15mm bore unplasticised PVC pipes of pressure rating 10 Kgf/cm² including fittings, fixed complete to walls, ceilings or in floors etc., and to any type of pipe complete all as specified and as directed.

S&F 20mm bore unplasticised PVC pipes of pressure rating 10 Kgf/cm² including fittings, fixed complete to walls, ceilings or in floors etc., and to any type of pipe complete all as specified and as directed.

M&L for vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests, P or S trap including provision of lime concrete bedding and connecting to existing flushing cistern and making good disturbed surfaces to match with suroundings, fixed in repairs complete all as specified and as directed.

M&L for vitreous China, wash down water closet pan (pedestal pattern), white including fixing bolts and connecting to existing flushing cistern and making good disturbed surfaces to match with suroundings, fixed in repairs complete all as specified and as directed.

S&F plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, fixed in repairs complete all as specified and as directed.

M&L for vitreous China wash hand basin, white, flat back, size 550mm x 400mm including cutting for and pinning in ends of brackets or erecting stand, 32mm dia waste coupling brass chromium plated, PVC waste pipe of suitable length, chain and plug, fixed in repairs complete all as specified and as directed.

M&L for PVC valveless, syphonic action type, flushing cistern, 10 litre capacity, low level, white, with inlet, ball valve, float and handle including brackets and connecting to WC, fixed in repairs complete all as specified and as directed.

S&F 32mm dia waste coupling, brass, chromium plated, with long screwed shanks and fly nuts, flanged end embedded in white cement to wash hand basin and other fixed to waste pipe, fixed in repairs complete all as specified and as directed.

S&F 125mm dia CP grating doom with or without waste hole fixed over floor/Nahani trap in white cement in repairs complete all as specified and as directed.

S&F kitchen sink with drainage board made of stainless steel 1mm thick with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, fixed in repairs complete all as specified and as directed.

S&F plate rack of stainless steel of size 39"x36"x8" with steel shelves, partitions & hanging arrangements for utensils, weight not less than 6.80 Kg, fixed in repairs complete all as specified and as directed.

Dismantling water tanks of capacity exceeding 250 litres and not exceeding 500 litres and removing to store complete all as specified and as directed.

Dismantling water tanks of capacity exceeding 500 litres and not exceeding 1000 litres and removing to store complete all as specified and as directed.

S&F rotational moulded polyethylene water storage tanks, triple layered, ISI marked (cylindrical vertical with closed top), 500 litres capacity, hoisted and fixed in position all as specified in SSR Part I, 2009 including 25mm dia or bore PTMT ball valve high pressure with epoxy coated aluminium rod & high density plastic ball (minimum weight 455gms) screwed for iron pipe, provision of 40mm/25mm spouts for connecting inlet, outlet, over flow and washout pipes including taking down old unserviceable tank with fixtures complete all as specified and as directed.

S&F rotational moulded polyethylene water storage tanks, triple layered, ISI marked (cylindrical vertical with closed top), 1000 litres capacity, hoisted and fixed in position all as specified in SSR Part I, 2009 including 25mm dia or bore PTMT ball valve high pressure with epoxy coated aluminium rod & high density plastic ball (minimum weight 455gms) screwed for iron pipe, provision of 40mm/25mm spouts for connecting inlet, outlet, over flow and washout pipes including taking down old unserviceable tank with fixtures complete all as specified and as directed.

S&F PVC water tank cover to existing PVC water tank and secure with hinges, fixed at any location including taking down old unserviceable cover complete all as specified and as directed. MAKE: SINTEX/POLYCON/INFRA/ROTEX

S&F 20mm dia gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron or CPVC pipe, fixed in repairs complete all as specified and as directed.

S&F 20mm dia or bore ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule with necessary GI fittings such as elbows, nipples etc., including taking down old unserviceable one complete all as specified and as directed.

S&F PVC cabinet of size 550mm x 520mm x 100 mm having 2 Nos sliding mirror of 4mm thick and size 240mm x 290mm with built-in rack of size 230mm x 150mm x 90mm and CP towel rail of 270mm long with PVC plugs etc., fixed in repairs complete all as specified and as directed. MAKE: SUPREME/PRAYAG

S&F 20mm dia mild steel PVC coated curtain rod with fancy type end brackets of any colour, fixed in repairs complete all as specified and as directed.

S&F 20mm dia mild steel decorative type coloured globes/ brackets for curtain rod, fixed in repairs complete all as specified and as directed.

S&F pelmet boxes made of 12mm thick plywood, BWR grade with decorative teak wood veneer 6mm thick on front and side exposed faces, 10mm thick teak wood beading to edges of plywood glued and nailed, second class hard wood brackets for holding curtain rod, exposed area polished with melamine wood finish, applying wood primer for inside surfaces and plugs 30x30x40mm embedded in wall with CM(1:4) including taking out old unserviceable pelmet boxes complete all as specified and as directed.

M&L for door seal 90 cm long, aluminium body, fixed to bottom of door along the width, serving all purpose viz., to avoid entry of light, noise, dust, rodents, insects, rain water and for air conditioning insulation including taking out old unserviceable door seal complete all as specified and as directed.

Cutting grooves 5mm width in walls over the cracks and filling the cracks with CM (1:3) complete all as specified and as directed.

Raking out old joints of tiles including cleaning of tiles with acid for floors/walls and pointed in white cement complete all as specified and as directed.

Removing vegetation/ small plants including uprooting completely lying on walls/roofs/chajjas/near service water tanks/along the soil pipes fixed on walls of buildings and making good to match with existing surface with PCC (1:2:4) type B1 (or) in CM (1:3), area of each patch not exceeding 0.10 Sqm including necessary ladders/ scaffolding etc., complete all as specified and as directed.

M&L for plain cement concrete (1:2:4) type B0 (using 12.5mm graded stone aggregate) as in bed blocks for hold fasts, including weathering, slightly rounded or chamfered angles and throating including necessary form work, exposed surfaces of concrete finished even and smooth without using extra cement complete all as specified and as directed.

SUBASH FURNITURE SHOP

NAWAZ CONSTRUCTIONS