Rejuvenation of existing open wells RWH Thottaipalayamin East Zone with in the Coimbatore City Municipal Corporation (CCMC) Area in Ward No 06 East Zone

Clearing of bushes, grass, and undergrowth around and inside the open well area including uprooting of vegetation and disposal of the same up to a lead of 50 meters, complete as directed by the Engineer-in-Charge.

Dewatering using 3HP to 70HP diesel engine pumpset including Hire charges, cost of Diesel, Engine oil, pump operator, labour charges, conveyance of pumpset and fuel to site and back, loading, unloading and any other incidental charges etc., complete.

Removal of sludge, slush, silt, debris, plastic waste, water weeds, using appropriate special machineries like dredger along the cutter section having maximum capacity of 300cum solids per hour which can dredge to a maximum of 8.00m depth and dispose the dredged material to a maximum of 4Km on either one of the outer slope of river banks whichever is convenient as per the prevailing site conditions for easy conveyance and jungle clearance by pumping operation along with suitable pipeline and other required accessories with other mechanical devices for the entire stretch to reach the bank. the rates including cost of transportation, Mobilization and demobilization of machinery, hire charges, cost of fuel, labour charges for surveying and operation of dredger, crew and other related works etc.

ORDINARY SOIL (SS20B) Earth work excavating and depositing on bank with initial lead of 10m & initial lift of 2m in Sand, silt or other loose soil, wet sand or silt not under water, light black cotton soil, sandy loam and ordinary soil including excavated earth (SS20B)

Pointing Random Rubble masonry with Cement Mortar1:3 (One Part of Cement and Three Part of Palstering Sand (P- Sand)) to flush pointing , curing etc complete - 10 sqm S.I.327

Plain Cement Concrete 1:2:4 (M-15) (one cement, two fine aggregates and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification (Page No. 36, CCMC SOR, SR.No. 8.)

Construction of underground filter having size- 1mx1m. Inside with 230mm thick brick masonry, with inside-outside plaster, bed concrete and coping in M-15 Grade including filling filter sand (of size 1mm to 2mm) 500mm thick over garvel (of size 5 to 10mm) 500mm thick over Boulder (of size 5 to 20mm) 500mm thick with all labour material etc. complete.

Construction of underground Chamber having size- 0.60mx0.60m inside with 230mm thick brick masonry, with inside-outside plaster, bed concrete and coping in M-15 Grade including excavation and necessary labour and material etc. complete.

Providing and fixing M.S Ladder 600mm wide, with vertical angle 65x65x6, Horizontal 16mm Dia. MS Bar @ 300mm C/c with 50x50x6 MS angle support @ 3000mm C/c with necessasry painting and fixing in Concrete block etc. complete.

Painting two coats with Ready Mixed Enamel Paint over the Old/new iron works of approved quality and colour without priming coat including the costallmaterials etc.,complete, in all floors. (Sl.No.368)

Supplying PVC Pipes for rainwater harvesting [working pressure: 4kg/Sq.cm] (M0873) PWD DSR Pg. No. 146 (2024-25)

Lowering PVC/ DWSC rigid pipes and specials to trench and laying to proper grade and alignment, jointing with PVC couplers with cement paste.

Panel board (for 7.5hp Motor)

Supplying and erecting 525 V 3 phase, 50 Hz., APP type capacitor having minimum overcurrent capacity of 1.8 In, peak inrush current capacity 300 In and minimum life 150000 hours kVAr bank of all polypropylene condensers (APP) with the standard capacities of 2, 3, 5, 7, 10, 12.5 and 15 kVAr units of P.F. correction for operation on 3 phase 50 Hz. with externally discharging resistances, earthing terminals and built on angle iron or channel iron frame work and provided with terminal cover box complete erected on provided iron bracket or on floor duly tested by licensee.

( 7.5HP-5.5KVAR )

Supply of 2 core 4 sq.mm Aluminium conductor PVC insulated LTUG cable

Maintenance of 7.5 hp pump including servicing and maintenance of key items such as; Lubrication, bearing, Seals & Gasket, Impeller, Valves, Piping, Electrical components, performance monitoring, Cleaning etc.

Maintenance for 3 Years

For First year

For Second year

For Third year