Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹58.5 L
EMD Value
₹1.2 L
Closing Date
15 Jan 2026, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
WORKSOL
19 conditions · 8 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less, where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure- VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet. per Annexure-N & Annexure-I of tender booklet
The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender as per Annexure- G of tender booklet.
b) (1) In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of dvertised value of each component of tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii) One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. (b)(2)In such cases, what constitutes a component in a composite work shall be clearly pre-defined with estimated tender cost of it, as part of the tender documents without any ambiguity. (b) (3) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 of the Standard General Conditions of Contractor through subcontractor fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing. However, if required in tender documents by way of Special Conditions, a formal agreement duly notarised, legally enforceable in the court of law, shall be executed by the main contractor with the subcontractor for the component(s) of work proposed to be executed by the subcontractor(s), and shall be submitted along with the offer for considering subletting of that scope of work towards fulfilment of technical eligibility. Such subcontractor must fulfill technical eligibility criteria as follows: The subcontractor shall have successfully completed at least one work similar to work proposed for subcontract, costing not less than 35% value of work to be subletted, in last 5 years, ending last day of month previous to the one in which tender is invited through a works contract. Note: for subletting of work costing up to Rs 50 lakh, no previous work experience of subcontractor shall be asked for by the Railway.
In case after award of contract or during execution of work it becomes necessary for contractor to change subcontractor, the same shall be done with subcontractor(s) fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract, with prior approval of Chief Engineer in writing.
Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates.
In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Definition of Similar Work: - Any work involving Provision of Train Display Board /Coach Guidance Display Board/ Electronic charting system/ LED clocks/LED display/Flip-Flap board for train information/token display board/fare display board/announcement system/Integrated Passenger Information system.
28 conditions · 24 needing a document upload
Please submit your bank details i.e. Name of the Bank along with Bank Branch Code, Account Number, IFSC Code, and PAN Number.as per annexure -J of tender booklet.
Please furnish list of plant and Machinery available on hand own and proposed to be inducted own and hired to be given separately for the subject work. as per annexure -E of tender booklet.
Please furnish list of Works on hand indicating Description of Work, Contract Value, Approximate value of balance work yet to be done and Date of award.
Please furnish list of Works completed in last seven financial years giving Description of Work, Organization for whom executed, approximate value of contract at time of award, Date of award and Date of Completion. Date of actual Start, Actual Completion and Final value of Contract shall also be given. Annexure -G.
Please furnish list of personal, organization available on hand and proposed to be engaged for the subject work.
Documents to be Submitted Along with Tender: (i)The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society / Registered Trust / HUF etc. The tenderer(s) shall enclose the attested copies of the constitution of their concern, and copy of PAN Card along with their tender. Tender Documents in such cases are to be signed by such persons as may be legally competent to sign them on behalf of the firm, company, association, trust or society, as the case may be. (ii)Following documents shall be submitted by the tenderer:
(a)Sole Proprietorship Firm: All documents in terms of Para 10 of the Tender Form (Second Sheet) above (As per GCC-2022). (Annexure-O-1 of tender booklet.)
(b)HUF: i) A copy of notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. (ii) All other documents in terms of Para 10 of the Tender Form (Second Sheet) above.as per GCC-2022.
(c)Partnership Firm: All documents as mentioned in para18 of the Tender Form (Second Sheet) as per GCC-2022.As per GCC- 2022. (Annexure-O-2 of tender booklet.)
d) Joint Venture (JV): All documents as mentioned in para 17 of the Tender Form (Second Sheet).as per GCC-2022.
(e)Company registered under Companies Act2013: (i) The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company (ii) A copy of Certificate of Incorporation (iii) A copy of Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company. (iv) All other documents in terms Para 10 of the Tender Form (Second Sheet) above.(Eligibility Criteria) above as per GCC-2022. (Annexure-O-10 of tender booklet.)
(f)(i) A copy of LLP Agreement (ii) A copy of Certificate of Incorporation (iii) A copy of Power of Attorney/Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP. (iv) An undertaking by all partners of the LLP that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP or JV in which they were / are partners/members. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the Standard General Conditions of Contract. (v) All other documents in terms of Para 10 of the Tender Form (Second Sheet)..(Eligibility Criteria) above as per GCC2022. (Annexure : O-11 & O-12 of tender booklet.)
(g)Registered Society & Registered Trust: (i) A copy of Certificate of Registration (ii) A copy of Memorandum of Association of Society/Trust Deed (iii) A copy of Power of Attorney in favour of the individual to sign the tender documents and create liability against the Society/Trust. (iv) A copy of Rules & Regulations of the Society (v) All other documents in terms of Para 10 of the Tender Form (Second Sheet) above.
The tenderer whether sole proprietor/ a company or a partnership firm/registered society / registered trust / HUF / LLP etc if they want to act through agent or individual partner(s), should submit along with the tender, a copy of power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, specifically authorizing him/them to sign the tender, submit the tender and further to deal with the Tender/ Contract up to the stage of signing the agreement except in case where such specific person is authorized for above purposes through a provision made in the partnership deed / Memorandum of Understanding / Article of Association /Board resolution, failing which tender shall be summarily rejected.
Any DIPP certificate submitted along with the tender document for, exemption of EMD should be valid on the date of opening of the tender, else the tender offer will be summarily rejected.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The tenderers may also upload the following documents along with his/their tender: The tenderer may upload statement, which shall contain organizational set up and working systems to be adopted by the successful tenderer s during the operation of the contract. It shall contain the details of man power and machineries in the prescribed format and details of methodology for planning, execution, monitoring and completion of the project. The methodology so adopted shall suit to the nature of work and shall also comply fully with best practice and current regulations. A comprehensive detailing for each activity like setting-up organization, safety plan, execution plan, quality assurance plan, sequence of work to achieve the mile stones, ensure targeted progress and quality and in turn deployment of resources, risk analysis and its mitigation strategy shall be given communication arrangement within his organization and with the railways for decisions, progress or any other matter connected with this project to ensure full information about the project including progress of work at different time scale shall also be furnished.
List of works completed in the last seven financial years giving description of work, organization for whom executed, approximate value of contract at the time of award, date of award and date of scheduled completion of work. Date of actual start, actual completion and final value of contract should also be given.
Supportive documents/certificates from the organizations with whom they worked/are working as list of works completed and list of works on hand should be enclosed.
List of works on hand indicating description of work, contract value, and approximate value of balance work yet to be done and date of award.annexure -H
Uploading of declaration regarding Employment/Partnership etc. of Retired Railway Employees as per GCC-2022 as per annexure -Q of tender booklet.
Uploading of Tender Forms shall embody the contents of the contract documents either directly or by reference and shall be as per specimen form, Annexure-I. e-Tender Forms shall be issued free of cost to all tenderers.
A copy of certificate stating that they are not liable to be disqualified and all their statements/documents submitted along with bid are true and factual. Standard format of the certificate to be submitted by the bidder is enclosed as Annexure-V. In addition to Annexure-V, in case of other than Company/Proprietary firm. Annexure-V(A) shall also be submitted by the each member of a partnership firm/Joint Venture (JV)/ Hindu Undivided Family (HUF)/ Limited Liability Partnership (LLP) etc. as the case may be.Non submission of a copy of certificate by the bidder shall result in summarily rejection of his/their bid. It shall be mandatorily incumbent upon the tenderer to identify, state and submit the supporting documents duly self attested/digitally signed by which they/he are/is qualifying the Qualifying Criteria mentioned in the Tender Document. (As per Railway bord letter no.2022/CE-l/CT/GCC- 2022/Policy dt. 13.12.2022)
Declaration form regarding site etc. as per annexure -C of tender booklet.
Declaration regarding constitution of firm as per Annexure-D of tender booklet.
Engineers/Personnel as per annexure -F of tender booklet.
Performa of Completion Certificate as per annexure -L of tender booklet.
Provision /development of circulating area of Second entry at Dabra station.
JHS-N-W-74-25~NCR
JHS-N-W-74-25
Open
Works - General
12 Months
Jhansi, Uttar Pradesh
₹0
₹1.2 L
15 Jan 2026
22 Dec 2025
1 Jan 2026
180 items across 2 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 44,89,028.89 | ||
| — | 3.00 | — | — | ||
| Supply of At-A-Glance Display Board Single Face (Mono Colour)as per RDSO spec no:- RDSO/SPN/TC/108/2019, ver-1.0 or latest. (Inspection Agency:-consignee). | — | — | — | 4,21,633.2 | |
| — | 1.00 | — | — | ||
| Supply of LED based Single faced Mono color(MLDB) Five line Train arrival /departure display board as per RDSO Specification No. RDSO/SPN/TC/108/2019, ver-1.0 or latest Suitable clamping arrangement and all consumable materials including steel frame to be supplied by the contractor. (Inspection Agency:- RDSO). | — | — | — | 5,52,846.32 | |
| — | 500.00 | — | — | ||
| Supply of power cable 3 core, 2.5 sq mm, multi strand (36/0.3 mm dia) cable as per IS 694:2010 reaffirmed 2015 or latest suitable for Railway electrification area, shall be of reputed make like Havells, Delton, LAPP, Finolex, or similar. (Inspection Agency:- Consignee). | — | — | — | 33,155 | |
| — | 4.00 | — | — | ||
| Supply of 20 watts Column speaker with 10 watt tapping, matching transformer and driver unit, Make- LBD 8373 of Philips/SCM-30T of Ahuja/Bosch/Shore or similar.(Inspection Agency:- Consignee). | — | — | — | 9,712.36 | |
| — | 4.00 | — | — | ||
| Supply of 30 watts Industrial Horn speaker with 5,10,15,20,25 watt tappings, matching transformer and driver unit, Make-LBD 8347 of Bosch/8308 of Philips/ UHC-30XT of Ahuja/Hitoen Boss or similar. (Inspection Agency:- Consignee). | — | — | — | 7,045.28 | |
| — | 1.00 | — | — | ||
| Supply and installation of Surface Mount Compact Speaker of EV Electro Voice EVID 4.2 as per technical Specification (Attached). (Inspection Agency:- Consignee). | — | — | — | 83,763.72 | |
| — | 2.00 | — | — | ||
| Supply of Portable PA System with mic and Bluetooth of make Ahuja BTA-880 50- Watts Portable PA Active Speaker/JBL or Superior. (Inspection Agency:- Consignee). | — | — | — | 40,788 | |
| — | 500.00 | — | — | ||
| Supply and wiring of 2 core screened/shielded multistrand PVC insulated wire (24/0.2 mm dia) for speaker load line.Make-Finolex/Polycab or Superior. (Inspection Agency:- Consignee). | — | — | — | 20,715 | |
| — | 2.00 | — | — | ||
| Supply, Installation and testing of Platform dual face, 4 digits, GPS synchronized digital clock as per RDSO spec. RDSO/SPN/TC / 62 / 2008 Rev. 3.0 or latest, with LED of Blue/Red/Orange/Green colour. It also includes all fitting arrangements. (Colour to be decided by Railways). (Inspection Agency:- Consignee). | — | — | — | 73,452.46 | |
| — | 4.00 | — | — | ||
| Supply Installation and testing of GPS Based Single face platform Digital clock as per RDSO Spec No. RDSO/ SPN / TC /62 /2008 Rev 3.0 or latest with LED of Blue/Red/Orange/Green colour.It also includes all fitting arrangements. (Colour to be decided by Railways).(Inspection Agency:- Consignee). | — | — | — | 1,30,404.48 | |
| — | 4.00 | — | — | ||
| Supply and fixing of GPS Clock in 2" digit size-HH:MM:SS of reputed Make-SKYLINK or Superior. (Inspection Agency:- Consignee). | — | — | — | 19,352 | |
| — | 5.00 | — | — | ||
| Supply and fixing of GPS Clock in 6" digit size-HH:MM:SS of reputed Make-SKYLINK or Superior. (Inspection Agency:- Consignee). | — | — | — | 43,542 | |
| — | 8.00 | — | — | ||
| Supply of 14 inch LCD/LED based UTS/PRS [Universal] Fare Repeater with facility of QR code display as per attached technical specification of CRIS letter. Make :- PRIMUS SOFTECH SOLUTION LLP MODEL NO :- PRI-FARE-L01 or Superior.(Inspection Agency:- Consignee). | — | — | — | 1,19,888 | |
| — | 1220.00 | — | — | ||
| Supply of CAT -6 STP cable (one box of 305 Mtr.(10/100/1000 mbps compatible). Make D-Link/Tyco/ Krone/ AMP or similar.(Inspection Agency:- Consignee). | — | — | — | 25,668.8 | |
| — | 2000.00 | — | — | ||
| Supply and fixing of PVC conduit pipe 25 mm dia along with all fixing accessories. like T, Bend pipe elbow etc. Make:- Polycab/AKG or Finolex.(Inspection Agency:- Consignee). | — | — | — | 59,680 | |
| — | 4.00 | — | — | ||
| Supply of 24 fiber optical fiber cable straight joint enclosure (SJC) complete with all accessories along with enclosures with heat shrinkable splice protection sleeve as per RDSO spec. RDSO/SPN/TC/68/2014 Revision 1.0, Amndt. 1.0 or latest. Splice losses in no case should be more than 0.1 dB. (Inspection Agency:- Consignee). | — | — | — | 22,026.84 | |
| — | 2.00 | — | — | ||
| Supply, installation and Fixing of 19 inch 9 U Racks with Front Glass Door, Socket Power DB, Fan-FanTray, Cable Manager ,Hardware Packet , Earthing etc. with required accessories for mounting the equipment. Make: D-Link/CP-Plus or superior.(Inspection Agency:- Consignee). | — | — | — | 11,902.9 | |
| — | 4.00 | — | — | ||
| Supply and installation of FMS (24 F-in & out ) rack mountable single mode with Suitable type connector(SC Type or as per site requirement) with splicing and termination of OFC cables with all accessories (Pig tail and other materials required for work to be supplied by contractor ) Make D-link ,Raycom, Tyco or similar.(Inspection Agency:- Consignee). | — | — | — | 28,944.36 | |
| — | 1.00 | — | — | ||
| Supply of permanently lubricated HDPE duct, 40 mm outer dia, as per RDSO spec. No. RDSO/SPN/TC/45/2013 Rev.2 Amndt.2 or latest, along with all accessories like end caps, collars, bends, couplers etc. (Inspection Agency:- Consignee). | — | — | — | 76,811.42 | |
| — | 3.00 | — | — | ||
| Supply of 2.048 Mbps, Managed SHDSL modems, as per RDSO spec. No. RDSO /SPN / TC / 80 /2020, Rev.2.0 or latest with suitable connector. A pair consists of V.35 andG.703 interfaces. (Inspection Agency:- Consignee). | — | — | — | 98,812.65 | |
| — | 2.00 | — | — | ||
| Supply of 2 Mbps Line termination unit/LAN extender 48V DC/230 V AC operated, as per RDSO spec. No. RDSO/SPN/TC/82/2020 Rev. 2.0 or latest, along with suitable connectors to extend line data over copper cable of 0.5mm/0.63mm/0.9mm dia. or CAT 5/6 cables. Make Cygnus, Team engineer, Cisco. (Inspection Agency:- Consignee). | — | — | — | 46,945.54 | |
| — | 2.00 | — | — | ||
| Supply and configuration of 24 Port L2 Smart Managed POE Switch 24 x Gigabit Copper PoE+ and 4 SFP port PoE. Make Dlink /Zyxel / Juniper or superior. (Inspection Agency:- Consignee). | — | — | — | 97,668.48 | |
| — | 2.00 | — | — | ||
| Supply and installation of online 1 KVA UPS with minimum 3 Nos. 7AH/12V battery or equivalent capacity or higher. Make - Uniline/ Microtek(Model No.-NM36MX1KK11-IB) /libert /luminuous or branded reputed make. (Inspection Agency:- Consignee). | — | — | — | 47,176.22 | |
| — | 2.00 | — | — | ||
| Supply of 4 Port True 4K HDMI Splitter Make :ATEN Model no.- VS184B or Superior. (Inspection Agency:- Consignee). | — | — | — | 55,618.5 | |
| — | 1.00 | — | — | ||
| Supply of Telescopic Ladder Make-Total Model no. THLAD08121 as per specification attached.(Inspection Agency:- Consignee). | — | — | — | 18,990 | |
| — | 1.00 | — | — | ||
| Supply of Foldable double side aluminum Ladder as per technical specification attached. Make: Plantex /Youngman or superior.(Inspection Agency:- Consignee). | — | — | — | 8,990 | |
| — | 2.00 | — | — | ||
| Supply of portable Metal TV Trolley Stand Adjustable Height withWheels & Shelf having 45.5 kgs Load Capacity and as per technicalspecification attached. (Inspection Agency:- Consignee). | — | — | — | 20,597.94 | |
| — | 4.00 | — | — | ||
| Supply of Heavy Duty Tripod with Professional Pan Head with Quick Release Plate Maximum Operating Height: 1984 mm, Max Load Upto: 25 kgs. Make and Model no.- Simpex DV 7500 Platinum or superior. (Inspection Agency:- Consignee). | — | — | — | 27,996 | |
| — | 2.00 | — | — | ||
| Supply of portable maintenance Service Terminal for installation, testing and maintenance of all networking parameters, as per Technical Specification attached. (Inspection Agency:- Consignee). | — | — | — | 1,41,531.44 | |
| — | 2.00 | — | — | ||
| Supply of HP LaserJet Tank 1020w Printer or superior. (Inspection Agency:- Consignee). | — | — | — | 28,998 | |
| — | 4.00 | — | — | ||
| Supply of BEACH/Garden Umbrella for emergency site with stand As per Specification attached. Make-RAINPOPSON/DECATHLON or Superior. (Inspection Agency:- Consignee). | — | — | — | 12,269.6 | |
| — | 10.00 | — | — | ||
| Supply of Lightweight Folding, Portable Indoor/ Outdoor chair for ART. Make Helios / ThinkPro / Pepperfry. (Inspection Agency:- Consignee). | — | — | — | 19,990 | |
| — | 4.00 | — | — | ||
| Supply of Rotary duct cutter suitable for cutting HDPE ducts of diameter 20mm to 42mm. The duct cutter shall have a facility of replaceable blades. The blades shall be of high carbon steel.(Inspection Agency:- Consignee). | — | — | — | 4,602 | |
| — | 2.00 | — | — | ||
| Supply and testing of tool set as per attached specification. (Inspection Agency:- Consignee). | — | — | — | 1,43,252.4 | |
| — | 10.00 | — | — | ||
| Supply of Fiber Cable Sleeve (60mm) Heat Shrinkable Protection (Sleeves 200 pcs) Make-OVG or superior. (Inspection Agency:- Consignee). | — | — | — | 2,475 | |
| — | 20.00 | — | — | ||
| Supply and installation of OFC Joint box small. Make- Optik vision gold or Superior. (Inspection Agency:- Consignee). | — | — | — | 2,434.4 | |
| — | 300.00 | — | — | ||
| Supply of Self-locking nylon cable zip tie (6 inch) each. Make-OVG or Superior. (Inspection Agency:- Consignee). | — | — | — | 570 | |
| — | 5.00 | — | — | ||
| Supply of 4 inch Nylon Cable Tie . Pack of 100*4= 400 ,(1 Number= 1 Pack) .Make- OVG or Superior. (Inspection Agency:- Consignee). | — | — | — | 802.5 | |
| — | 100.00 | — | — | ||
| Supply of line cord of Make-FEDUS or superior. (Inspection Agency:- Consignee). | — | — | — | 4,145 | |
| — | 100.00 | — | — | ||
| Supply of HMT cord of Make- Canlink / Comtrue or Superior. (Inspection Agency:- Consignee). | — | — | — | 5,948 | |
| — | 200.00 | — | — | ||
| Supply of krone Module 10 Pair Make: Krone or Similar. (Inspection Agency:- Consignee) | — | — | — | 14,494 | |
| — | 10.00 | — | — | ||
| Supply and testing of crimping tool for RJ-45 and RJ-11.Make-AMP/DLink/ Pro'sKit or Superior. (Inspection Agency:- Consignee). | — | — | — | 12,650 | |
| — | 10.00 | — | — | ||
| Supply and testing of Krone tool of Make-Pro'sKit or Superior. (Inspection Agency:- Consignee). | — | — | — | 13,012.4 | |
| — | 10.00 | — | — | ||
| Supply and testing of wrapping tool 22SWG of Make-OPT/Gold or Superior. (Inspection Agency:- Consignee). | — | — | — | 3,643.2 | |
| — | 10.00 | — | — | ||
| Supply and testing of unwrapping tool 22SWG of Make-OPT/Gold or Superior. (Inspection Agency:- Consignee). | — | — | — | 3,643.2 | |
| — | 16.00 | — | — | ||
| Supply of thermo shrink jointing kit as per RDSO Specn.No. IRS: TC 77-2012(Rev.3.0) with (Amdt.-1 to 3) or latest, suitable for 6 Quad/jelly filled cables for straight through/derivation joints. It includes supply of all the accessories, without transformer. (Inspection Agency:- RDSO). | — | — | — | 53,778.4 | |
| — | 1000.00 | — | — | ||
| Supply of 20 Pair PIJF cable 0.63MM armoured cable Make: Usha Martin or Superior. (Inspection Agency:- Consignee). | — | — | — | 1,84,480 | |
| — | 60.00 | — | — | ||
| Supply of Double Walled Corrugated pipe size of outer dia 90mm /inner dia 76mm ,having non flame propagation and anti rodent properties as per RDSO Specification RDSO/SPN/204/2011 Version 1.1 with all accessories. (Inspection Agency:- Consignee). | — | — | — | 14,250.6 | |
| — | 12.00 | — | — | ||
| Supply and installation of maintenance free earth electrode. It should comply with RDSO spec.RDSO/SPN/197/2016 Version 1.0 or latest. Installation of Maintenance free earth electrodes shall comply with the code of practice for earthing and bonding system for telecom equipment's as per RDSO,s letter No.STS/E/SPD dtd19/22.2008 or latest. (Inspection Agency:- Consignee). | — | — | — | 2,04,379.32 | |
| — | 250.00 | — | — | ||
| Supply & installation of hot dip galvanized type cable tray with cover of size 300mmxX5OmmxX2mm.Make :-Legrand (Cablefil) /COPE / Leviton / Panduit or superior. (Inspection Agency:- Consignee). | — | — | — | 4,39,725 | |
| — | 2.00 | — | — | ||
| Supply of Apparatus Case/Location Box Full as per RDSO drg. no. RDSO/S-11500 or latest, with 'E' type lock and key ward no. 42, . The key and handle should be supplied at the rate of one no. per four Apparatus cases. The 'E' type key lock is as per RDSO Spec. IRS;S-30/64 or latest, RDSO drg. no.SA 3376/M or latest and Key is as per Drg. No. 3377/M or latest. Note: This item includes the supply of 2 Nos E Type Lock fitted on both doors, along with two Keys.(Inspection Agency:- Consignee). | — | — | — | 55,024.68 | |
| — | 2500.00 | — | — | ||
| Supply of Disconnect Terminal block for four conductors with screwing cage/screwless clamp type, sliding switch disconnect, as per RDSO spec. RDSO/SPN/189/2004 Ver. 3.0 or latest, for each conductor size up to 2.5 sq. mm, equivalent of M6 terminals. Each terminal block equipped with two markers, on top and bottom, an end plate, two end clamps and adequate length of rails for fitting terminal blocks. (Inspection Agency:- RDSO). | — | — | — | 4,81,800 | |
| — | 7.00 | — | — | ||
| Supply of Apparatus Case/Location Box Half as per RDSO drg. no. RDSO/S-11507 or latest, with 'E' type lock and key ward no. 42, . The key and handle should be supplied at the rate of one no. per four Apparatus cases. The 'E' type key lock is as per RDSO drg. no.SA 3376/M or latest and Key is as per Drg. No. 3377/M or latest. Note: This item includes the supply of 2 Nos E Type Lock fitted on both doors, along with two Keys. (Inspection Agency:- Consignee). | — | — | — | 1,39,332.83 | |
| — | 8.00 | — | — | ||
| Supply of Phenolic laminated Sheet, resin bonded, grade P3 in standard size of 1220 X 1220 x 10 mm as per spec. No IS 2036 of 1995 or latest. Test report of manufacture to be supplied.(Inspection Agency:- Consignee). | — | — | — | 42,974.88 | |
| — | 200.00 | — | — | ||
| Supply of 8 SWG GI wire (4 mm dia) suitable for Track circuit rail bonding as per RDSO spec. IRS: S 13 - 62. (Inspection Agency:- Consignee). | — | — | — | 18,008 | |
| — | 1000.00 | — | — | ||
| Supply of PVC insulated jacketed wire rope for Track lead connections. The wire rope should be of galvanized steel, 6 mm dia, (6x19 stranded wire with steel core of 6 mm) sheathed with PVC. (Inspection Agency:- Consignee). | — | — | — | 43,530 | |
| — | 5.00 | — | — | ||
| Supply of Metravi 4673 mini digital clamp meter features high reliability, safety, precision and compact design. Its resolution ratio is 1mA. AC/DC Current has maximum range of 100A AC/DC; particular VFC start mode. Entering this mode can accurately measure voltage and current which has VFC frequency conversion. Voltage or current response display is T-RMS. Whole range overload protection, reliable measurement accuracy and unique design makes it an outstanding new generation electrician/electric power measurement instrument. (Inspection Agency:- Consignee). | — | — | — | 29,350.8 | |
| — | 2.00 | — | — | ||
| — | 5.00 | — | — | ||
| Supply of Megger 500V DC digital type, push button type, metal body Motwane D2K- M Make or Similar (with similar specifications). The make and model shall be supplied after. (Inspection Agency:- Consignee). | — | — | — | 68,959.85 | |
| — | — | — | 13,65,010.16 | ||
| — | 3.00 | — | — | ||
| Installation, Testing and Commissioning of At-A-Glance Display Board Single Face (Mono Colour)with required accessories as per RDSO Spec.No. RDSO/SPN/TC/108/2019 ver-1.0 or latest | — | — | — | 42,163.29 | |
| — | 1.00 | — | — | ||
| Installation and commissioning of LED based Five line Single faced monocolor (MLDB) train arrival/departure display board as per instruction of site incharge. All fitting materials are to be supplied by the contractor. | — | — | — | 27,610.15 | |
| — | 8.00 | — | — | ||
| Installation of Universal Fare Display System for UTS Ticket windows compatible with all PRS & UTS thin client/ Dumb Terminal including all necessary material. | — | — | — | 3,497.44 | |
| — | 3000.00 | — | — | ||
| Laying of S&T Cables of various cores/ pairs/ quads/PIJF cable in trenches/ GI pipes/ RCC pipes/ DWC pipes etc. as per the site requirement and as per approved cable route plan. Th is also includes laying of cables in track crossings & road crossings. (Cables will be meggered before and aft er its laying by contractor under supervision of Railway Representative and he will submit the meggering report of each testing). Length of the cable laid includes the length of the cable coiled for termination purposes. | — | — | — | 20,520 | |
| — | 4.00 | — | — | ||
| Splicing of 24 core optic fi bre cable and making the splicing joint with contractor's own machine and tools. Joint should be prepared in such a way that the top of the enclosure should be at a depth of minimum 1.2 meter and the enclosure should be covered with soft soil and bricks. Splice loss of each fibre should beless than 0.05 dB. | — | — | — | 48,047 | |
| — | 2.00 | — | — | ||
| Construction of OFC jointing pit of size 1mx1mx0.6m, using bricks, sand and cement in the ratio 1:3. The thickness of the wall shall be 120 mm. The top cover shall be of concrete of thickness 75 mm with two iron handles on top of it. The pit shall be covered with sand after putting the joint enclosure. All construction material to be supplied by contractor | — | — | — | 12,515.3 | |
| — | 1.00 | — | — | ||
| Laying of HDPE duct as per the approved cable route plan in the exavated trenches/other protected works/RCC channel etc. including all accessories like end caps, collars, bends, couplers etc. The ends of the duct to be sealed with end plugs till OFC blowing is done. Important: The laying of OFC cable independently or along with Quad cable/PIJF cable in the same trench shall be governed by the RDSO drawings no. RDSO/TCDO/COP-6(a) and RDSO/TCDO/COP- 8(a) respectively, issued vide Chapter-XIII of the Telecomm Manual | — | — | — | 8,092.25 | |
| — | 1.00 | — | — | ||
| Blowing/drawing of OFC cable in the HDPE pipe duct and protective work already provided in the trench. The cable shall be laid only after the successful completion of the DIT (Duct Integrity test). The DIT should be certified by the Railway engineer at site. All the equipments/machinery required shall be arranged by the contractor. | — | — | — | 17,093.05 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .