Special repair to building No. P-132(NCOs MD Accn) at AEC TRG College and Centre, Pachmarhi

Amount

Demolition of cement concrete of any description (unreinforced) in ground floors and paving not exceeding 15 cms thickness (below or above ground level) including removal of debris to out side MD land complete all as specified & directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete including removal of debris to out side MD land complete all as specified & directed.

M&L for 18-20mm thick granite of approved quality as in platform i.e. in horizontal & vertical position, machine cut (table rubbed and polished) laid over and including 15mm thick rendering in CM 1:4 and jointed with grey cement slurry and pointed with white cement (1:2) using marble dust with admixture of pigment to match the shade of granite stone including cutting and polishing complete all as specified and directed.

M&L for 25 mm thick, PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in sub base of floors and the like etc considering the floor slope complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in lintels upto 1.50M clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railing upto 60cm in height, copings, kneelers, apex stones, bed plates etc and the like including weathering slightly rounded/ chamfered angles with & including necessary use and waste of form work for fair faces of concrete, complete all as specified and directed.

M&L for RCC (1:1.5:3) (Nominal mix) type A-1 (using 20mm graded crushed stone aggregate) for chajjas and similar articles and mass concrete complete all as specified and as directed. Note:- Reinforcement shall be measured & paid separately under respective item of BOQ.

M&L for RCC(nominal mix) 1:1.5:3 type A-1 using 20mm graded crushed stone aggregate as in lintels upto 1.50M clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railing upto 60cm in height, copings, kneelers, apex stones, bed plates etc and the like including weathering slightly rounded/ chamfered angles with & including necessary use and waste of form work for fair faces of concrete, complete all as specified and directed. Note:- Reinforcement shall be measured & paid for separately under respective item of BOQ.

M&L for precast RCC (1:1.5:3) type A1, (using 20mm graded crushed stone aggregates) as in cover slab (for manholes) and set in CM (1:6) including necessary fair finish formwork complete all as specified and directed. Note:- Reinforcement shall be measured & paid for separately under respective item of BOQ.

M&L for RCC (1:1.5:3) (Nominal mix) type A-1 (using 20mm graded crushed stone aggregate) for foundations, facia, louvres, parapets and railing and mass concrete complete all as specified and as directed. Note:- Reinforcement shall be measured & paid for separately under respective item of BOQ.

Dismantling of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and pre-cast concrete articles complete all as specified and directed.

M&L for brick work with sub class 'B' fly ash bricks, straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified & directed.

Supply only Integral water proofing compound (liquid) of make as approved by GE complete all as specified & directed.

Demolition and breaking up drain pipes (PVC/ SGSW/ AC/ RCC pipe) of 150 mm bore of pipe, set in cement mortar complete all as specified and as directed.

M&L for salt glazed stone ware (SGSW) pipe conforming to IS, laid in trenches and jointed in CM (1:1) for 150 mm bore of pipe complete all as specified and directed.

M&L concrete bed to pipes in PCC (1:4:8) type D2 (using 40mm graded crushed stone aggregate) including packing under and haunching against the sides of pipes after they are laid on slope and tested for 150 mm bore sewer pipe line complete all as specified and directed.

M&L for cutting into existing manholes 150 mm nominal dia. for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and directed.

M&L for formwork to sides of concrete foundations, facia, louvres, parapets and railing, and similar work; vertical or to batter for rough finished flat surfaces of concrete complete all as specified & directed.

M&L for formwork to sides of chajjas and similar articles for fair finished square, rectangular or polygonal surfaces of concrete complete all as specified & directed.

M&L for formwork for rough finish to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed.

M&L for formwork for rough finish to edge of concrete flats exc 10 cm but n.exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or slopping and similar work, complete all as specified and directed.

Taking down Chowkhats or frame with shutter (without taking off shutter from the frame) area n.exc 1.50 sqm each and removal complete all as specified & directed.

Taking down Chowkhats or frame with shutter without taking off shutter from the frame) area exc 1.50 sqm but n.exc 4 sqm each and removal complete all as specified & directed.

Taking down shutters of any description, of Area exc 1.0 sqm but not exc 2.0 sqm each size complete all as specified and directed:-

S&F flush shutters, ISI mark, solid core construction with block board core and ply wood face panels, commercial type on both sides for 30 mm thickness complete all as specified and directed.

Supply & fix factory made solid PVC door frame of size 50mmx47mm made out of 5mm single side prelam PVC sheet reinforced with MS square tube and edges painted to match with printed sheet complete all as specified & directed. Make:- Sintex or Rajshree or equivalent make as approved by GE.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, fixed in frame complete all as specified & directed. Make:- Sintex or Rajshree or equivalent make as approved by GE.

Supply & fix 125mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

Supply & fix 100mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

Supply and fix aluminium handles 150mm size, cast type, anodised complete all as specified & directed.

Supply and fix 200mm long aluminium anodised barrel tower bolts of extruded section complete all as specified & directed.

Supply and fix aluminium handles 125mm size, cast type, anodised complete all as specified & directed.

Supply and fix 125mm long aluminium anodised barrel tower bolts of extruded section complete all as specified & directed.

Supply & fix 300mm long aluminium alloy, anodised sliding door bolts with hasp & staple (bolt type) & fixing clips of sheet, cast or extruded section and fixing bolts & sliding bolts of extruded section or cast aluminium alloy complete all as specified & directed.

Supplying & fixing 19/20mm mild steel, chromium plated curtain rod fancy type with brackets of brass fancy type fixed on walls with brass screws complete all as specified & directed. Note:- Cost of any number of brackets shall be deemed to be included in the quoted unit rate and nothing extra shall be paid on this account.

M&L for factory made second class (Indian Sal, Bijasal, Hollock or Benteak) hardwood glazed and skeleton shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) and fitted to chowkats complete all as specified & directed. Note :- glazing shall be measured and paid for separately.

M&L for mild steel TMT bars 10mm dia and over as in reinforcement for concrete, cut to length, bent to shape required, including cranking, bending, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for mild steel TMT bars 8mm dia as in reinforcement for concrete, cut to length, bent to shape required, including cranking, bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Supply and fix factory made pre-coated steel windows/ ventilators flash butt welded with side hung shutters including box type hinges with pre-coated handles, pre-coated tower bolts, pre-coated steel peg stay 250mm long with suitable lugs and with glazing bars dovetailed or welded with and including provision of guard bars complete all as specified and as directed.complete all as specified & directed. Notes: (i) For construction details, TD drawing No. CEJZ/TD/980 Sheet 1/2 & 2/2 shall be followed. (ii) Wiremesh/ glass panes shall be measured and paid separately in "supply only" under respective items of BOQ.

Supply and fix factory made pre-coated steel windows/ ventilators flash butt welded with side hung shutters including box type hinges with pre-coated handles, pre-coated tower bolts, pre-coated steel peg stay 250mm long with suitable lugs and without glazing bars complete all as specified and as directed.complete all as specified & directed. Notes: (i) For construction details, TD drawing No. CEJZ/TD/980 Sheet 1/2 & 2/2 shall be followed. (ii) Wiremesh/ glass panes shall be measured and paid separately in "supply only" under respective items of BOQ.

Supply and fix factory made steel ventilators with top hung shutter including hinges, steel peg stay complete all as specified & directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples or any other means as per site requirement complete all as specified & directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Supply and fix rolled mild steel sections conforming to Fe- 410-W (Gde E-250) quality-A as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails & guides for sliding doors, fixed with angle cleats or other connecting plates etc complete all as specified & directed.

M&L for mild steel conforming to Fe.290.Gde-E-165 in framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; ladders; railings and similar work complete all as specified & directed.

S&F pressed steel frames of 125mm x60mm size made out of 1.25mm thick mild steel sheets for door with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of red oxide primer including cutting holes and making good in PCC 1:2:4 type B-1 using 20 mm graded stone aggregate complete all as specified and as directed. Note : 10mm deformed bar shall be provided in bottom portion in each frame. The rate for the same is included in rate quoted against this item.

Taking down/ removing existing roof treatment over roof slab, roughening surfaces of old concrete floor/ roof/ terrace by picking and wire brushing the surface to remove the loose concrete, dust etc sweeping clean and washing down with water to remove dust, etc including removal of debrise to out side MD land complete all as specified & directed.

M&L for 10mm thick rendering over roof surfaces in CM 1:4 with using liquid integral water proofing compound @ 2% by wt of cement or as per manufacturer's instructions, finished even and smooth without using extra cement complete all as specified & directed. Note: WPC shall be measured and paid separately as "Supply Only" under respective item of BOQ.

M&L for applying evenly tack coat of hot blown bitumen 85/25 grade conforming to IS-702 @ 1.20 kg/sqm after cleaning the surfaces over & including a coat of bitumen primer @ 0.30 litre/ sqm consisting of 3/4 part bitumen of grade 85/25 and 1/4 part of kerosene oil on the top of prepared roof surfaces complete all as specified & directed.

M&L for unrolled over the bitumen coated surface, 3mm thick spun bonded non-woven polyester reinforced APP modified water proofing membrane weighing not less than 3.0 Kg/Sqm with minimum over lap of 100mm and over lap shall be sealed by flame as per manufacturer's instructions complete all as specified & directed. Note:- Suitable embedment of APP modified water proofing membrane shall be ensured into walls/parapet walls, special care shall be taken in laying APP modified water proofing membrane in situations such as drain/ expansion joints etc.

M&L for 250cm X 250cm X 20 to 22mm thick or 300cm x 300cm x 20 to 22 mm thick Precast machine pressed of grey cement concrete tiles , factory made as per IS-1237-1980 (ISI marked) laid over 15mm thick screed bedding in CM (1:4) mixed with water proofing compound @ 3% by weight of cement and tiles joints shall be filled with polymer based cement proof joint filler manufactured by approved company complete all as specified and directed. Note :- WPC will be measured & paid for separately.

Taking down CI pipe including fittings of any description complete all as specified and directed

S&F cast iron soil, waste and vent pipes in any length with or without ears, with cement joints and fixed to wall for 100 mm bore of sand cast pipes complete all as specified and directed.

S&F cast iron soil, waste and vent pipes in any length with or without ears, with cement joints and fixed to wall for 75 mm bore of sand cast pipes complete all as specified and directed.

S&F CI bends ( any radius ), diminishing pieces or tapers (larger bore measured) of 100 mm size complete all as specified and directed.

S&F CI bends ( any radius ), diminishing pieces or tapers (larger bore measured) of 75 mm size complete all as specified and directed.

S&F CI branch pieces, single (equal or unequal), ordinary or inverted(spigot/socketed type) or with parallel branches with oval access doors for 75 mm bore of pipe complete all as specified and directed.

Dismantting of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering and ridge complete all as specified and as directed.

Supply and fix pre-painted galvalume aluminium zinc coating GI based 0.60mm thick corrugated steel sheet of any colour having minomum tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws/ L or J type or cranked hook/ bolts as complete all as specified & directed. Make: Tata Bule Scope Steel Ltd or M/S Cril Colour Roof India Ltd. or Everest Industries Ltd or equivalent brand of other Make as approved by GE from list of make attached with tender documents.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) including removal of debrise to out side MD land complete all as specified & directed.

M&L for non-skid coloured ceramic tiles 7-8mm thick (square/ rectangular) area of each tile exc 0.11Sqm but not exc 0.18Sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM (1:6) complete all as specified & directed.

M&L for non-skid joint free coloured ceramic tiles 7-8mm thick (square/ rectangular) area of each tile exc 0.11Sqm but not exc 0.18Sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM (1:6) complete all as specified & directed.

M&L for non-skid joint free coloured ceramic tiles 7-8mm thick (square/ rectangular) area of each tile exc 0.11Sqm but not exc 0.18Sqm as in skirting/ dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM (1:4) complete all as specified & directed.

M&L for glazed ceramic coloured tiles 350x250x7mm or 450x350x7mm thick as approved by GE on vertical surfaces such as skirting/ dado, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM (1:4) complete all as specified & directed.

M&L for machine cut kota stone slab as in flooring, 18-20mm thick over & including 20mm thick cement screed bed in CM (1:4) laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified & directed.

M&L for machine cut kota stone slab as in skirting/ vertical surface, 15-18mm thick over & including 10mm thick rendering in CM (1:3) laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified & directed.

M&L for 75mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in plinth protection finished even and smooth without using extra cement forming joints to full depth at every 3M intervals and at every change of direction and filing with bitumen sand mixture 1:3 by weight complete all as specified and directed.

Taking down cement plaster etc on brick walls/ concrete (ceiling) surfaces of any descriptions including racking out joints, hacking for keys, scrubbing down with water and disposal of unserviceable materials to out side of MD land complete all as specified & directed.

M&L for 12mm thick rendering in CM 1:6 on other than fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified & directed.

M&L for 12mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified & directed.

M&L for preparing old decorated plastered or unplastered surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spot and applying two coats of colour wash complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of wall and apply two coats of oil emulsion distemper over a coat of chalk whitening primer complete all as specified and directed.

M&L for 5mm thick rendering on fair faces surface in cement plaster (1:3) as in ceiling and fininshed surface even and fair complete all as specified and directed.

M&L for preparing new plastered or unplastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

M&L for preparing old plastered or unplastered surfaces of walls and applying two coats of white wash complete all as specified and directed.

M&L for preparing new plastered or unplastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for preparing old plastered or unplastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed.

M&L for prepration of old decorated plastered or unplastered surfaces of walls of any description by complete removal of existing treatment and preparation of surfaces for further treatment and applying two coats of distemper, oil emulsion white or tinted complete all as specified and directed.

M&L for prepration of new plastered surfaces of walls and applying two coats of cement base paint over & including a coat of cement primer complete all as specified & directed.

M&L complete removal of existing treatment of wall and applying two coats of cement base paint over & including a coat of cement primer complete all as specified & directed.

Supply only 3.0mm thick sheet glass, ordinary quality alongwith oil putty for glazing in squares n exc. 0.5 sqm in each pane complete all as specified and as directed. Note:- To be fixed in steel windows/ ventilators since fixing element of this item has already been considered alongwith steel windows/ ventilators as taken here-in-before.

S&F brass CP shower rose with swinal joints 125 mm dia including fixing to GI pipe or union complete all as specified and directed.

S&F in repair of stainless steel peg set of 3 Nos fixed to wooden plank complete all as specified and directed.

S&F shelf of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 300 gms) complete all as specified and directed. Make:- PRAYAG SYMET/ COMMANDER or equivalent brand of other Make as approved by GE from list of makes attached with tender documents.

Supply & fix in repairs, soap dish disc wall mounted (oval) type, silver brass finish including all necessary screws of same finish of pattern & make as approved by GE complete all as specified and directed.

M&L for preparation of new surfaces of wood or wood based materials of any description over 10 cm width or girth and applying two coat synthetic enamel paint of colour as approved by GE over and including a coat of pink primer complete all as specified & directed.

M&L for preparation of old painted surfaces of wood or wood based materials of any description over 10cm width or girth and applying two coat of synthetic enamel paint complete all as specified & directed.

M&L for preparation of new surfaces of iron/ steel of any description over 10 cm width or girth and applying two coat of synthetic enamel paint of colour as approved by GE over and including a coat of red-oxide primer complete all as specified & directed.

M&L for preparation of old painted surfaces of steel of any description over 10cm width or girth and applying two coat of synthetic enamel paint complete all as specified & directed.

Taking up or down steel tubing and connections, including cleaning for refixing or removing to store of size 15mm bore of pipe complete all as specified and as directed.

Taking up or down steel tubing and connections, including cleaning for refixing or removing to store of size 20mm bore of pipe complete all as specified and as directed.

Supply & fix 15mm bore medium grade galvanised steel tubes with all fittings and fixed complete to walls and ceilings or laid in floor complete all as specified & directed.

Supply & fix 20mm bore medium grade galvanised steel tubes with all fittings and fixed complete to walls and ceilings or laid in floor complete all as specified & directed.

Refixing old steel water tubing 15mm dia with and including new GI fittings and connected to new or old positions of walls, ceilings, floors etc complete all as specified and directed. Note: Old GI pipe obtained from taking up or down here-in-before shall be re-used after necessary cleaning.

Refixing old steel water tubing 20mm dia with and including new GI fittings and connected to new or old positions of walls, ceilings, floors etc complete all as specified and directed. Note: Old GI pipe obtained from taking up or down here-in-before shall be re-used after necessary cleaning.

Dismantling of water tank of any description of capacity exc. 500 litres but not exc. 1000 litres, removing to store or from the site complete all as specified and as directed.

Supply and fix 750 ltrs capacity rotational moulded polyethylene water storage tank double layered (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified & directed. Make:- Sintex or Tuff or JS Poly Plast or Dhara as approved by GE.

Supply & fix, 20mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod and high dencity plastic ball, screwed for iron pipe or brass ferrule complete all as specified & directed. (Note-Min weight should not be less than 210 gms) Make:- PRAYAG SYMET or COMMANDER or equivalent brand of other Make as approved by GE from list of makes attached with tender documents.

Supply and fix 15mm dia stop valves/ angle cock, cast copper alloy, screwed down high pressure with crutch or butter fly handle, fancy type, chromium plated, with long shank and cup (concealed type) screwed both ends for iron pipe or for unions complete all as specified & directed. Make:- Marc or Zoloto or Plumber or Gem or Seiko or Prayag polymer Pvt Ltd or equivalent brand of other Make as approved by GE from list of makes attached with tender documents.

S&F 15mm dia bib cock,cast copper alloy with crutch or butterfly handle, fancy type, chromium plated, screwed down for iron pipe or brass ferrule complete all as specified & directed. Make:- Marc or Zoloto or Plumber or Gem or Seiko or Prayag polymer Pvt Ltd or equivalent brand of other Make as approved by GE from list of makes attached with tender documents.

Supply and fix pillar taps, cast copper alloy with capstan heads, fancy type, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe 15mm dia complete complete all as specified & directed. Make:- Marc or Zoloto or Plumber or Gem or Seiko or Prayag polymer Pvt Ltd or equivalent brand of other Make as approved by GE from list of makes attached with tender documents.

Supply & fix in repairs vitreous china squatting pan, Orissa pattern of size 580x440 mm white, with integral foot rest and PVC 'P' or 'S' trap including connection to trap, and to flush pipe, etc (excluding flushing pipe) and making good to floor complete all as specified & directed. Make:- CERA or PARRYWARE or HINDWARE or equivalent brand of other Make as approved by GE from list of makes attached with tender documents.

S&F in repairs 10 ltr capacity PVC valve less syphonic action type flushing cistern low level 'white' with inlet ball valve, float valve & handle Including 32mm bore PVC flush pipe & brackets and brackets fixed to wall complete all as specified & directed. Make:- CERA or PARRYWARE or HINDWARE or equivalent brand of other Make as approved by GE from list of makes attached with tender documents.

S&F chromium plated brass tubular towel rail, 20mm dia, D type, 60 cm long between flanges complete all as specified and directed.

S&F in repair plate rack with racks and guard bars made out of stainless steel minimum 1mm thick, over all size 1000mm X 900mm and assembled with using brass nuts, bolts and washers complete all as specified and as directed.

Supply & fix in repairs vitreous china white WHB (550 x 400 mm) flat back with CP waste coupling, waste pipe, brackets including cutting for and pinning in ends of brackets complete all as specified and directed. Make:- CERA or PARRYWARE or HINDWARE or equivalent brand of other Make as approved by GE from list of makes attached with tender documents.

Supply & fix in repairs kitchen sink with drainage board made of stainless steel 1.0mm thick with plug, washers with and including 32 mm dia PVC rigid waste pipes and C.P coupling including fixing cantilever brackets of suitable shape & size as required at site and connecting unions to pipe, overall size 915 mm x 460mm, bowl size 410 mm x 330 mm x 160mm and necessary cutting to slab complete all as specified & directed. Make:- Prayag Polymer Pvt Ltd or Blue Star Silver Shine or Nirali or equivalent brand of other Make as approved by GE from list of makes attached with tender documents.

S&F 100mm dia CI cowl complete all as specified and directed.

M&L for cast iron floor trap with grating including jointing to waste pipe fixed in PCC (1:2:4) type B1, of 100 mm bore of size complete all as specified & directed.

M&L in repair for cast iron Nahani trap with grating including jointing to waste pipe fixed in PCC (1:2:4) type B1, for 100 mm bore of size complete all as specified & directed.

M&L for cup board shutters of 19mm thick prelaminated particle board, interior grade, pre laminated one side with decorative choice lamination and other side balancing white lamination with 5mm thick teak wood edging on one side, bottom and top and other side 10mm teak wood edging with rebate and leaping treated with french polish complete all as specified and as directed.

Supply and fix double action spring hinges, mild steel with steel wire spring, stove enamelled, black complete all as specified and directed.

M&L precast reinforced cement concrete type B0 1:2:4 (12.5 mm graded aggregate) in door and window frames any size single or double rebated including arrangement for fixing of hinges and fixture as required complete all as specified & directed.

Taking down carefully copper/aluminium point wiring on batten/ PVC conduit (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, sockets, light fittings etc, including removal and making good disturbed surfaces of walls, ceilings etc as per existing complete all as specified & directed.

M&L for point wiring concealed type with 1.50sqmm PVC insulated, unsheathed, single core, multistranded copper conductor FRLS cable 1100 volts grade including 1.5sqmm PVC insulated unsheathed multistranded copper copper conductor FRLS cable as earth continuity conductor drawn through in and including rigid PVC conduit not less than 20mm dia with its accessories, sunken type pressed steel terminal box made of 1.2mm thick MS sheet/ anodised steel box painted with one coat of red oxide primer including 3.0mm thick ISI marked laminated/ ebonite sheet cover for fixing switches/ socket/ regulators etc including all fixing accessories and cutting chases as per standard engineering practice & making good the disturbed surfaces as per existing finish for the one light/ fan/ exhaust fan/ bell point controlled by one no one way piano type switch 5/6 Amps complete all as specified & directed.

M&L for point wiring concealed type with 1.50sqmm PVC insulated, unsheathed, single core, multistranded copper conductor FRLS cable 1100 volts grade including 1.5sqmm PVC insulated unsheathed multistranded copper conductor FRLS cable as earth continuity conductor drawn through in and including rigid PVC conduit not less than 20mm dia with its accessories, sunken type pressed steel terminal box made of 1.2mm thick MS sheet/ anodised steel box painted with one coat of red oxide primer including 3.0mm thick ISI marked laminated/ ebonite sheet cover for fixing switches/ socket/regulators etc including all fixing accessories and cutting chases as per standard engineering practice & making good the disturbed surfaces as per existing finish for the one socket out let 3/5 pin, 5/6 Amps controlled by one no one way piano type switch on the same board with other switches complete all as specified & directed.

M&L for point wiring concealed type with 1.50sqmm PVC insulated, unsheathed, single core, multistranded copper conductor FRLS cable 1100 volts grade including 1.5sqmm PVC insulated unsheathed multistranded copper conductor FRLS cable as earth continuity conductor drawn through in and including rigid PVC conduit not less than 20mm dia with its accessories, sunken type pressed steel terminal box made of 1.2mm thick MS sheet/ anodised steel box painted with one coat of red oxide primer including 3.0mm thick ISI marked laminated/ ebonite sheet cover for fixing switches/ socket/regulators etc including all fixing accessories and cutting chases as per standard engineering practice & making good the disturbed surfaces as per existing finish for the one socket out let 3/5 pin, 5/6 Amps controlled by one no one way piano type switch on independent board but not below the switch board of light points in same vertical plane complete all as specified & directed.

M&L for point wiring concealed type with 2.50sqmm PVC insulated, unsheathed, single core, multistranded copper conductor FRLS cable 1100 volts grade including 1.5sqmm PVC insulated unsheathed multistranded copper conductor FRLS cable as earth continuity conductor drawn through in and including rigid PVC conduit not less than 20mm dia with its accessories, sunken type pressed steel terminal box made of 1.2mm thick MS sheet/ anodised steel box painted with one coat of red oxide primer including 3.0mm thick ISI marked laminated/ ebonite sheet cover for fixing switches/ socket/regulators etc including all fixing accessories and cutting chases as per standard engineering practice & making good the disturbed surfaces as per existing finish for the one socket out let 3/6 pin, 15/16 Amps controlled by one no one way piano type switch on independent board complete all as specified & directed.

Supply & fix semi moduler type , switch piano, flush type single pole, one way 5/6 Amps, 240 volts, AC(ISI marked) complete all as specified & directed.

Supply & fix semi moduler type , switch piano, flush type single pole, two way 5/6 Amps, 240 volts, AC(ISI marked) complete all as specified & directed.

Description same as per Item No. 115.00 But for call bell point.

Description same as per Item No. 115.00 But for one light point controlled by two switches two way.

Supply & fix in repair semi moduler type, switch socket combination 2 in 1, 2/3 pin, 5/6 Amps, 230 volts AC shuttered flush type multipurpose controlled by one switch complete all as specified & directed.

Supply & fix in repair semi moduler type, switch socket combination 2 in 1, 3 pins 5/6 Amps and 3 pins 15/16 Amps flush universal type controlled by one switch complete all as specified & directed.

Supply & fix ceiling rose, surface bakelite, 65x50mm surface type, two to three terminals, AC 240 volts complete all as specified & directed.

Supply & fix semi moduler type, rotory stepped type electronic fan regulator mini flush type 100W, 240 Volts-50Hz complete all as specified & directed.

Supply and fix electrical bell model city ding dong (Ding dong type) AC, 240 Volts complete all as specified & directed. Make:- Anchor or Cona or Plaza as approved by GE.

Supply and fix angle type lamp holder insulated with polycarbonate body including 9 W led bulb complete all as specified and directed. Makes: (i) Anchor/ Plaza for lamp holder as approved by GE. (ii) Wipro/Havells/Bajaj/Crompton

M&L for provision of sub main wiring with two runs of single core FRLS PVC insulated, unsheathed, mutistranded copper conductor cable of size 6.0 sqmm drawn in and including rigid PVC conduit medium grade ISI marked not less than 20mm dia with its accessories, concealed type, including one run of single core FRLS PVC insulated, unsheathed, multistranded copper conductor cable of size 6.0sqmm as earth continuity and cutting chases as per standard engineering practice & making good the disturbed surfaces as per existing finish complete all as specified & directed. Notes:- (i) Finished sub main wiring with two runs of 6.0 sqmm cable & one run of 6.0 sqmm cable alongwith PVC conduit and its accessories shall be measured and paid one unit length. (ii) Connections of cables with MCBs or bus bars shall be done through appropriate size brass/ copper thimbles. (iii) Colour coding for wiring/ bus bar/ main connection shall be followed .

Supply and fix TPN DB, 4 way sheet metal enclosure triple pole and neutral, IP 43-IK 09 with metal door, 230 volts with copper bus bar of 200A suitable for fixing MCBs, Isolators etc including taking down old complete all as specified and directed. Make:- Legrand Cat No. 6077 15 or equivalent model of make L&T/ Havells/ ABB/Schnider or as approved by GE.

Supply and fix SPN DB, 8 way double door sheet metal enclosure single pole and neutral, IP 43-IK 09 with metal door, 230 volts with copper bus bar of 200A suitable for fixing MCBs, Isolators etc including taking down old complete all as specified and directed. Make:- Legrand Cat No. 6077 11 or equivalent model of make L&T/ Havells/ ABB/Schnider or as approved by GE.

Supply & fix MCB TPN, 63 Amps, 'C' series, 415 volts, 50Hz, 10kA complete all as specified & directed. Make:- Legrand Cat No. 4086 83 or equivalent model of make L&T/ Havells/ ABB as approved by GE.

Supply & fix MCB SPN, 32 Amps, 'C' series, 240 volts, 50Hz, 10kA complete all as specified & directed. Make:- Legrand Cat No. 4086 17 or equivalent model of make L&T/ Havells/ ABB as approved by GE.

Supply & fix MCB SP, 6 to 32 Amps, 'C' series, 240 volts, 50Hz, 10kA complete all as specified & directed. Make:- ABB/ Legrand/ Siemens/ L&T/ Havells as approved by GE.

Supply and fix indoor commercial basis all purpose, surface and wall mounted LED batten with polycabonate housing & integrated clectronic driver with and including 20 Watt LED tube and connecting up with & including twin twisted copper flexible wire from ceiling rose to fittings complete all as specified & directed. Make:- Havells Cat Part No. LUMILINEBS20WLED830SPCWH or equivalent model of make- Philips or Crompton or WIPRO or Bajaj as approved by GE.

Supply and fix mini mirror LED light indoor domestic mirror light luminaire 1x5/7/9 watt including connections with twin core wire of suitable size complete all as specified and as directed. Make:- Crompton Cat part No. LCL-07-CDL or equivalent model of make- Havells or WIPRO or Bajaj as approved by GE.

Supply and fix decorative wall mounting light fixture city-1 made up of poly carbonate with 9 watt LED bulb (B-22 base) complete all as specified and directed. Make:- Havells Cat part No. LHDL02160099 or crompton or wipro or Bajaj.

Supply and fix blanking plate complete all as specified and directed.

Supply and fix in repairs, 25 watt new generation energy saving and environmental friendly long life LED security light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP opening seperate driver compartment with IP65 protection and impact resistance of IK07 on bldg wall with and including pipe bracket made out of G.I tubing 32/40 mm dia bore medium grade ISI marked 1.20m long bent to shape & providing clamps 2 Nos made out of 50 x 6mm Flat iron/ MS clamps & 12mm dia bolts, nuts & washers etcand two coat painting of approved colour on brackets completely with and including synthetic enamel paint and connecting up with & including twin twisted copper flexible wire from ceiling rose to fittings complete all as specified & directed. Make:- Havells Cat part No. ENDURAPEARLSL25WLED757SASYTOPCMP or equivalent model of make- Philips or Crompton or WIPRO or Bajaj as approved by GE.

M&L for earthing complete with galvansided steel earth plate electrode 600x600x6.0mm thick directly burried in the ground (earth pit not less than 2.25M deep below ground level) with top edge of earth plate not less than 1.50M deep below normal ground level, connected to galvanised iron wire 4mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel, 15mm bore GI pipe medium grade including necessary fittings for protection of earthing wire, watering pipe 20mm bore GI medium grade, concrete chamber in PCC (1:4:8) type D-2 using 40 mm grade aggregate, coping shall be in PCC (1:3:6) type C-1 using 20 mm grade aggregate and internal surfaces of concrete chamber shall be given 12mm thick plaster in CM (1:4), funnel with wire gauge of 22 gauge (0.63 mm) 8 mesh per linear including 50mm thick cover of RCC (1:2:4) type B-1 using 20mm grade stone aggregate reinforced with 8mm MS deformed bar @ 75 mm C/C both ways, char coal dust and common salt all as shown in electrical plate No. 3 of SSR Part-I (2009) including all necessary excavation & earth work and removal of surplus soil to a distance n. exc 50M and providing connection points with MS/ GI bolts & washers as required and connection from earth test point to earth electrode with same GI earth wire alongwith protection pipe and testing on completion complete all as specified and directed. Note:- GI wire and protection pipe from earth electrode to test point max upto 7.50M shall be deemed to be included in the unit rates as quoted by the contractor.

Schedule of credit amount of Rs. 41,849.00 to be deducted during AOC

DEEPAK JAISWAL

M/S RAKESH TRADERS

SUBIR KUMAR ROY