Hattikhana Ambajogai Dist Beed part 2 Compound Wall

Specialised Stone cleaning to remove oil or emulsion paint,stains or dark patches,layers of impervious coatings,cementious layers,rust stains from surface of stone with chemicals ,thinners,solvents or soft teepol type soap solution or by pressure jet machine (As specified by consulting architect),A gentle use of air abrasive tools may be permitted as long as no damage to the original surface is ensured.it may include usage of mechanical tapping ,chemical surfactant or solvant,patent cleaning product or use of pressurised micro abrasive as necessary.test patches would need to be undertaken to asses efficeincy of technique prior to work.Removal to be followed by water washing.The surface shall finally be cleaned by hand rubbing and rinsing with clean water to obtain nearly original surface,colour and texture

Applying breathable, non-reactive, antifungal, and water repellant Silane/ Siloxane chemical as approved by Archaeological Survey of India/ Engineer-in- charge, of approved brand and manufacture, diluted with solvent mineral Turpentine oil in the ratio of 1:12 (One part of approved chemical :12 Part of Turpentine oil), on the existing sand stone masonry surface with two or more coats to give uniform application of chemical on the surface, all complete as per direction of Engineer-In-charge (The rate is inclusive of all materials & labours involved except scaffolding).

Providing injection grouting with a slurry of lime and fine screened sand in proporation of (1 : 1) with a proper jet pump pressure including cleaning and washing and packing the existing crack / holes in the brick or stone masnory properly upward with slurry,scaffolding,curing etc. complete and machineries, scaffolding, curing etc. complete.

Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth /murum, ramming, watering including shoring and strutting etc. complete (lift upto 1.5m) By Mechanical Means.

Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete.

Providing and laying cast in situ 1:2:4 Lime Concrete of Trap stone metal for foundation and bedding as per detailed specifications and drawings or as directed including centring, formwork, laying/pumping, compacting, preparing the lime mortar in lime miller and then mixing with coursed aggregate in drum mixer, bailing out water, watering etc. complete.

Providing and fixing Stone Paving, Second Sort in lime mortar 1:1½, with size of stone 0.60 cm. x 0.45 cm. x 0.15 cm., as per detailed specifications and drawings or as directed including all stone slabs to of approved quality, hard, even, sound, durable and uniform thickness, the stones to be not finely chisel-dressed on the surface and the course to be of prescribed width, true for top 25 mm. (1″), the joints running true, the stones to be laid with joints not exceeding 8 mm. (5/16″) thick and to be evenly and firmly bedded flush in mortar on the concrete and no hollow left, side to be dressed true and as per shape at least half the depth from the face, preparing the lime mortar in lime miller, watering and all paving work when handed over to be perfectly clean and free from all mortar stains etc. complete

Providing Ashlar Fine Stone Steps of trap / granite stones in lime mortar 1:1with size of stone 0.6m. x 0.400 m. x 0.220 m. as per detailed specifications and drawings or as directed including the stones be of approved quality, colour, hard and free from defect of any kind, the stones shall be of exact size and shape, the shall be fine dressed on exposed surface, holes for balusters should be cut in the steps before they are laid, each stone shall rest at least 3.8 cm. (1½″) on that below it, the beds or joints being in no case more than 3 mm. (⅛″), preparing the lime mortar in lime miller, watering and all steps work when handed over to be perfectly clean and free from all mortar stains etc. complete.

Providing Semi-circular Coping Cut-stone Second Sort, 22.5 cm. (9″) height and 52.5 cm. (1ꞌ9″) wide of trap / granite stones in lime mortar 1:1½ with size of stone 0.900 m. x 0.60 m. x 0.2125 m. as per detailed specifications and drawings or as directed including the stones be of approved quality, colour, hard and free from defect of any kind, the stone shall be dressed full or to template, exposed face of the stones shall be fine rough tooled, semi-circular and all joints shall be in line and close and not more than 3 mm. (⅛″) thick, preparing the lime mortar in lime miller, scaffolding, watering and all coping work when handed over to be perfectly clean and free from all mortar stains etc. complete. NON SSR 59

Providing and fixing mild steel grill work for windows, ventilators etc. 20 Kilogram/ One Square Metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete.

Providing and fixing mild steel grill railing 20 Kilogram/sq.m with teakwood hand rail of size 75mmx 60mm.and sill of 75mm.x 25mm.and newel posts for staircases, including fabricating, fix-tures, erecting, painting the grill work with one coat of antIcorrosive paint and two coats of oil painting with approved colour and polishing the sill,hand rail and the newel post with french polish.

Providing and fixing mild steel grill gate with angle iron frame 65mm x 65mm x 10mm with iron bars at 150mm C/C and diagonal flats as per the detailed drawing including hinges,pivot block locking arrangement , welding riveting and oilpainting of three coats of approved shade Weight of gate 35 Kilogram/Smt.

Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. completeIt is Mandatory to use First Quality T.W.From F.D.C.M.L

Providing and fixing partition of welded mesh of 3 mm dia. wires 50 mm x 25 mm size mesh including integrated non teak seasoned wood frame 80 x 50 mm of vertical and horizontal scantling and finishing with oil painting 3 coats etc. complete. It is Mandatory to use First Quality T.W.From F.D.C.M.L

Providing and fixing Country cut teak wood double or single leaf panelled shutters, 35 mm thick style top and freze rail 95 x 35 thick with lock and bottam rail 195 x 25 mm thick and panels without ventilator as per detailed drawing excluding the door frame, stainless steel fixtures and fastening and finishing the wood work with oil painting 3 coats complete It is Mandatory to use First Quality T.W.From F.D.C.M.L

Providing and fixing Country cut teak wood Vertical member of frame of size 0.15 x 0.15 x 0.90 for Wooden Railing including scaffolding if necessary

Providing and fixing Country cut teak wood Horizontal member of frame of size 0.10 x 0.15 x 2.1 for Wooden Railing including scaffolding if necessary .It is Mandatory to use First Quality T.W.From F.D.C.M.L

Providing and applying melamine polish of required finish to the wood work byspray machine including knotting and preparing the even surface by scraping,applying French polish , scaffolding if required etc. complete.Note:The work to be executed on prior approval of Superintending Engineer will be necessary.SSR 2022 - 23 Page No.222 Item No.34.09

GARDEN SOIL: -Supplying on site garden soil well sieved 80 % to pass through I.S. sieve of 10 mm size free from stones rubbish like dried grass roots and other such materials. The soil should be fresh from quarry. The color of the soil generally is red. The soil will be measured by measuring box. (Farma) Item includes Transporting, loading -unloading etc. (Lead charges per 15 km. considered. Excluding Royalty)

FARM YARD MANURE: -Supplying on site well decayed, well dried, well powdered, without clods and free from stones, dried grass and other rubbish material. The color of the manure generally is black. The manure will be measured by measuring box. (Farma) Item includes Transporting, loading -unloading etc ( Lead charges per 10 km. considered.

Excavation for planting lawn/ shrub/ flower bed/ hedges/ edges/ canna bed in earth, soil of all types, soft murum, including removing the excavated material up to a distance of 50 mtrs. for a depth of 30 cms.

Excavation pit size 1.00 x1.00 x 1.00m for planting large flowering/ shady trees (plant height 2 to 4 mtr.)/ palm varieties of height (plant height 2 to 4 mtr.) in earth, soil of all types, soft murum, including removing the excavated & unwanted material up to a required distance of 50 mtrs.

Refilling fresh garden soil / silt & manure in excavated area of depth 30cms. (1/10 of unskilled labour)

Filling fresh garden soil / silt & manure in excavated pit size area of 1.00 x 1.00 x 1.00m (1/10 of unskilled labour)

Mixing garden soil/silt & manure thoroughly well, watering previous night. Planting reqired plant species, lawn grass as directed etc. complete for required depth 5 to 30 cms. for planting lawn/ shrub/ flower bed/ hedges/ edges/ canna bed/ ground cover. (1/10 of semiskilled labour)

Mixing garden soil/silt & manure thoroughly well, watering previous night. Planting reqired plant species as directed etc. complete for required pit size 1.00 x 1.00 x 1.00m. (1/10 of semiskilled labour)

Foliage Shrubs (Nerium) Specification:- Well Developed ,Fresh, Healthy bright Colour Leaves ,free from pest and diseases

Foliage Shrubs (Duranta Golden) Specification:- Well Developed ,Fresh, Healthy bright Colour Leaves ,free from pest and diseases

Flowering Shrubs (Mogara/Jasminum) Specification:- Well Developed ,Fresh, ealthy half in bloom, free from pest and diseases.

Flowering Shrubs (Ratrani/Night queen) Specification:- Well Developed ,Fresh, Healthy half in bloom, free from pest and diseases.

Flowering Trees (Bakul) Specification:- Minimum Girth 10m to 15 c.m. Clear trunk , with Maximum number of Leaves , well Developed CanopyFree from pest and diseases,well seteled in appropriate size of Plybag,uniform in size and root system are undamaged. (Height above 3 m)

Flowering Trees (Kadamb) Specification:- Minimum Girth 10m to 15 c.m. Clear trunk , with Maximum number of Leaves , well Developed CanopyFree from pest and diseases,well seteled in appropriate size of Plybag,uniform in size and root system are undamaged. (Height above 3 m)

Flowering Trees (Kaduneem) Specification:- Minimum Girth 10m to 15 c.m. Clear trunk , with Maximum number of Leaves , well Developed CanopyFree from pest and diseases,well seteled in appropriate size of Plybag,uniform in size and root system are undamaged. (Height above 3 m)

Providing and fixing of retro-reflectorised informatory sign board rectangular / Square in shape having area less than 0.9 square meter made out of 2 mm luminum sheet bonded with white retroreflective sheeting of Class (Type IV High intensity micro-prismatic grade sheeting-HIP) having pressure sensitive /heat activated adhesive retoreflective specified background, border and back side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3, supported with back support frame 25 mm x 25 mm x 3 mm duly painted on back side with two coats of grey stove enamel paint and supported on one Number mild steel angle iron post 75 mm x 75 mm x 6 mm, 3.5 mt long firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing The angle iron post shall be duly painted with one coat of epoxy primer and two coats of epoxy finish paint having alternate black and white bands of 25 cm width including GI fixures and transportation etc. complete. The nutbolts of board with angle iron post / supporting structure after fixing at site has to be electrically welded. Class B (Type IV High intensity micro-prismatic grade heeting-HIP) sheeting shall have 7 years written warranty from the manufacturer and authorised distributor / convert or issued for field erformance including the screen printed areas and cutout sheeting and cut-out durable transparent overlay film

Public Seating Chair. - 3 Seater Providing and Fixing 3seater Public seating chair made of complete metal with Legs in Crome finish and seates in silver powder coating finish.SSR 2022-23 Page No.359 Item No.51.44

Supplying and erecting Solar Street Light with PV Panel,Battery,Cable,Pole Non SSR

SITC of LED Post top Lantern/ Handi type 50 w BMC-R3-ME-4-29-a

Carrying of detailed topographic survey by using total station along the existing or new road including taking L-section and cross section at every 30 meter ROW ,taking at least 10 spot levels per cross section, picking up all existing details inside the Row like electric telephone line , encroachments, structures etc. connecting all the primary total station control points by G.I.S.Bench marks level or whichever available with department using auto level and preparing Auto CAD plan by using above data taking out 1 set of black and white printout on 50 micron polyster film sheet A2 size and 2 sets of coloured printout on A2 size submitting soft copy all data on CD. Plain Terrain New Alignment SSR 2022-23 Page No.17 Item No. 1.41

Supplying prefabricated portable cabin including 2no.of cabin fan,6 no. of Led Light, 1 no. of Outer MCB,,1 no. of Bulk Head,6 no. of Switch and socket board,1 no. of main board,1 no. of AC Point and stand, and 2 no. Of Window with safety grill Non SSR

Please Enable Macros to View BoQ information