Al Partition work in room no 2105 CC I at IIIT A

Amount

Al. Partition work in room no. 2105, CC-I at IIIT-A(AS PER BILL OF QUANTITY ANNEXURE-III)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) ( DSR-2018, no. 21.1.2.3) Partition section size : 63.0 mm x 38.10 mm and Door section size : 81.25mm x 38.10mm of Make - Jindal Aluminium Ltd. / Hindolco / Triveni Industries Ltd or Equivalent

Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment). DSR-2018, No. 21.17, Make - Jindal Aluminium Ltd. / Hindolco / Triveni Industries Ltd or Equivalent

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.0 mm thickness (DSR-2018, No. - 21.3.2)

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on both sides DSR-2018 No. 21.2.2, Make- Century/ Green Ply / Signature or equivalent brand.

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : Size 200x10 mm, DSR-2018, No. 9.97.3, Make - Jindal Aluminium Ltd. / Hindolco / Triveni Industries Ltd or equivalent brand.

Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. Make Godrej. - DSR-2018, No. - 21.13

Supply & fixing of vertical Blinds(Confirming to all Specification as per bill of quantity part -B, Sl. No. 1 to 11) Tender documents Page No. 19 to 20.

Sai Enterprises