Providing Ten Nos G26 to G 35 of Shops Arrangement at inner side of Anna Bus Stand Thoothukudi

Amount

Supplying of Materials structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification

Fabricating supplying and fixing of pre painted galvanium colour sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers.

Providing and fixing of Aluminium Composite Panel (ACP) 4 sided vertical and horizontals out of specially designed extruded sections withstand wind pressure of 180 Kg/sq.m and fabricated fixed at all level elevation and heights. The extruded section cutting and fixing required space extruded section shall be of 6063 and alloy of BSH 9 confirming T is – 63400.The 4mm thick ACP sheet (0.25 + 3.5 + 0.25) alstrong or equivalent fixing with spacer tape and the ACP sheet bounded with special type structural sealant of dow corning 789 or equivalent in dust free conditions the gaps between ACP sheet to be filed with whether sealant and backer rod or 12mm foam sheet to ensure water and air tightness in all complete complying with standard specification as directed bythe departmental officer

Supplying, fabricating, erecting and fixing Hilux (or) Equivalent Board False Ceiling upto a ceiling height of 4.5m from floor level Using Hilux Board Plain Sheets (10mm thick) the cost includes which is suspended by using 0.3mm thick skelet trelis T15 metal grid system.The skelet trelis T15 metal grid system of 600 x 600mm moduleincludes skelet WA15 W30 wall angle with unequal flanges of 15 / 19mm, length 3000mm, fixed along the perimeter of walls with thehelp of nylon sleeves and suitable fasteners at 300mm centers.Then suspend the skelet MT15 W36 MainT with flange width 15mm, height 32mm and length 3600mm, from the soffit slab with help ofsoffit cleat and wire rod with leveling spring clip at 1200mm centres.Skelet CT15 W12 CrossT with flange width 15mm, height 26mm and length 1200mm is interlocked into the pre-cut slots in the Main T15at 600mm centers in the perpendicular direction to the Main T15.Finally skelet CT15 W06 CrossT with flange width 15mm, height26mm and length 600mm are interlocked into the precut slots in theCT15 W12 CrossT in direction parallel to the Main T15 to result in600 x 600mm module. Sisoli Serene / Slate Spirts / Slate Polka ofsize 595 x 595 x 15mm shall be placed into the grid size of 600 x600mm. The systems to achieve noise reduction coefficient not lessthan 0.5 NRC, so as to have an neat appearance as directed by thedepartment offices.

Providing Painting two coats with ready mixed synthetic enamel paint to new iron work using best and approved colour including all the cost and conveyance of materials to site and all labour cahrges etc. complete as per standard specification.

Supplying and Erecting Pull and Push Type Rolling Shutter with ISI make of approved size and section using 18 GI sheet. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc (Manual Operator)

Painting two coats with approved interior and exterior emulsion paint over cement plastered wall surfaces, ceiling and other new surfaces including Cleaning preparing the surface and curing etc., complete as per standard specification

Wiring with 2x1.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires in flush with wall with with metal box and 6A 1way modular Switch in flush with wall with suitable modular front plate cover for making good of the concealed portion for PVC concealed light point /fan point for Electronic Regulator) (5 Points Per Coil) (Data-26)

Supply and fixing of 5Amps (3 pin an 2 pin ) combined flush type waqll socket with control switches concealed in suitable TW Box covered with 3mm thick hylem sheet

Supply and fixing of 5A / 15 A 3 Pin combined flush type wall socket with 15A flush type switch concealed in suitable MS Box in flush with wall and covered with 3 mm thick hylem sheet

Supply and fixing of 20 W Surface Single 4' LED fitting complete on wall with PVC unsheathed Copper leads from the terminals to the fittings including all charges etc, complete as per standard specification.

Supply and fixing of 4way single pole and neutral MCB sheet steel enclosure with IP 42 protection with 1No 32 Amps DP MCB as incoming and 6 Nos 6 Amps to 32 Amps SPMCB as outgoing inflush with wall and making good of the concealed portion with earth connection only. (The MCB DB and MCB's should be of Legrand/Hager make)

Supply and fixing of Miniature Circuit breakers 240 V / 415V 50HZ - AC supply suitable for both lighting and motor circuits Single Pole 6A to 32A, 10KA including all charges etc, complete as per standard specification.

Supply and fixing of 40 A FP MCB Isolators including all charges etc, complete as per standard specification

Supply and fixing of 25 Amps 30 MA DP RCCB / ELCB including all charges etc, complete as per standard specification.

Supply and clamping of 2 x 10 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps. (SD-217)

Supplying and run off 8 SWG copper wire on walls or below ground level with necessary 'U' nails, earth work excavation and refilling & including the cost of all materials etc., complete in all respects as directed by the departmental officers.(SD 75)

Earthing as per the ISI specification with an earth electrode of 2.1mt class 'B' GI pipe of dia not less than 40mm, with copper earth plate of size 125mm x 50mm x 6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry.

Supply and fixing of 600mmx50mm 16SWG GI Hot dip galvanized powder coated preforated cable tray on ceiling or wall with necessary fastereners, bolt nuts and clamps. (Data-29)

Supply and fixing of 20 Amps MCB

SHASHA ENGINEERING AND CONSTRUCTIONS