Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹46.0 LAccepted-AOC | L1 | Accepted-AOC L1 bidder lowest | |
| 2 | L2₹46.8 L+₹78,714.50 (1.71%)Rejected-Finance 1257 SCHEME NO 5 NEAR HB COLLEGE VIJAY NAGAR JABALPUR MP PIN 482002 | JABALPUR | MADHYA PRADESH | 482002 | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹58.3 L+₹12.3 L (26.8%)Rejected-Finance 1476 SARASWATI COLONY CHERITAL JABALPUR | JABALPUR | MADHYA PRADESH | 482001 | L3 | Rejected-Finance Other than L1 | |
| 4 | L4₹79.6 L+₹33.7 L (73.2%)Rejected-Finance 2284 30 BAJRANG NAGAR VFJ ESTATE JABALPUR 482009 | JABALPUR | MADHYA PRADESH | 482009 | L4 | Rejected-Finance Other than L1 |
Tender Value
₹47.7 L
EMD Value
₹95,320
Closing Date
1 Oct 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (West) Jabalpur
Garrison Engineer (West) Jabalpur Supply Marg Post Box No. 54 Jabalpur Cantt-482001 (MP)
PROVN OF 150 X DESERT COOLER WITH STAND AND WATER CONNECTION FOR OFFICE, DINING, HALL AND OR LIVING ACCN OF 1 MTR, 1STC AND CERTAIN REVENUE AND MINOR WORKS IN THE AREA OF AGE E/M (W) W/S AND AGE E/M (W) E/S UNDER GE (WEST) JABALPUR
2024_MES_671987_1
8781/E8
Open Tender
Civil Works
Item Rate
180 days
GE (West) Jabalpur
As per tender documents
6 documents required · 6 mandatory
₹500
GE (West) Jabalpur
₹95,320
20 Nov 2024
5 Sept 2024
3 Oct 2024
5 Sept 2024
1 Oct 2024
17 Sept 2024
5 Sept 2024 - 7 Sept 2024
Amount
M&L of Sub main wiring with two single core PVC Insulated cable two run of size 4 Sqmm multi-strand copper conductor FRLSH cable 1100 volts grade drawing in and including PVC conduit, medium grade not less than 20 mm dia with all conduit accessories and one run of 4.0 Sqmm multi-strand copper conductor FRLSH cable as continuous earth wire including making good disturbed surface to match existing complete all as specified & directed. Note : - Two run of 4 Sqmm, one run of 4.0 Sqmm cable and one run of conduit shall be measured as one unit run.
S&F for modular switch 6-10 Amps one module 230 volts AC complete all as specified and as directed
S&F for frame plate for modular switch 3 module including screws and washers etc complete all as specified and as directed.
S&F MS Housing box 3 module suitable for modular switch in the switch box complete all as specified and as directed.
Supply & Fixing sheet metal enclosure for MCB DB, double door [Acrylic], single pole and neutral, 240 volts, 4 way with 200 Amp, 10 KA breaking capacity rated bus bar with blanking plate wherever required and IP-43 degree protection complete all as specified as directed.
Supply and fix MCB single pole 240V, 10 KA 'C' curve of capacity 5 to 32 AMP complete all as specified as directed.
Supply and fix MCB SPN 32 Amps rating 240V, 10KA 'C' curve and complete all as specified as directed.
Supply and installation, commissioning and testing of heavy duty desert cooler electric driven (single phase), having nominal air flow capacity of 5000 CuM per hour (or nearest size)(Steel body) complete all as specified and as directed.
Supply and fix Framed brackets of angles or tees with web and flanges cut to shape, drilled and counter sunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 complete all as specified and directed.
Supply & fix Cast iron sluice valve, ISI Marked 100 mm bore flanged of class 1.0 PN having spindle made out of gun metal, operating wheel nuts, bolts, packing complete all as specified and directed.
Supply & fix Cast iron sluice valve, ISI Marked 80 mm bore flanged of class 1.0 PN having spindle made out of gun metal, operating wheel nuts, bolts, packing complete all as specified and directed.
Supply and laying of GI steel tubing 80 mm bore medium grade laid in trenches/floors/fixed on walls and including necessary fittings such as bends, elbow, tees, sockets etc including necessary saddles and clamps complete all as specified and directed.
Supply and laying of GI steel tubing 50 mm bore medium grade laid in trenches/floors/fixed on walls and including necessary fittings such as bends, elbow, tees, sockets etc including necessary saddles and clamps complete all as specified and directed.
Supply and laying of GI steel tubing 40 mm bore medium grade laid in trenches/floors/fixed on walls and including necessary fittings such as bends, elbow, tees, sockets etc including necessary saddles and clamps complete all as specified and directed.
Supply and laying of GI steel tubing 25 mm bore medium grade laid in trenches/floors/fixed on walls and including necessary fittings such as bends, elbow, tees, sockets etc including necessary saddles and clamps complete all as specified and directed.
Supply and laying of GI steel tubing 20 mm bore medium grade laid in trenches/floors/fixed on walls and including necessary fittings such as bends, elbow, tees, sockets etc including necessary saddles and clamps complete all as specified and directed.
Supply and laying of GI steel tubing 15 mm bore medium grade laid in trenches/floors/fixed on walls and including necessary fittings such as bends, elbow, tees, sockets etc including necessary saddles and clamps complete all as specified and directed.
M & L Gun metal globe / gate valve (ISI Marked) with iron wheel head, screwed both ends for pipes or for unions for 50 mm bore dia steel tubing complete all as specefied and directed.
M & L Gun metal globe / gate valve (ISI Marked) with iron wheel head, screwed both ends for pipes or for unions for 40 mm bore dia steel tubing complete all as specefied and directed.
M & L Gun metal globe / gate valve (ISI Marked) with iron wheel head, screwed both ends for pipes or for unions for 25 mm bore dia steel tubing complete all as specefied and directed.
M & L Gun metal globe / gate valve (ISI Marked) with iron wheel head, screwed both ends for pipes or for unions for 20 mm bore dia steel tubing complete all as specefied and directed.
Material & labour brick masonry valve pit of size 90 cm x 90 cm x 90 cm (internal size) with mild steel cover 6mm thick and angle iron frame of size 50 x50 cm x 6mm duly painted with two coats of synthetic enameled paint over a red oxide primer including locking arrtangement, brick work and all inner suraces of pit and exposed portion of out side shal be plastered in cement motor (1:4) complete all as specified and directed.
Material & labour brick masonry valve pit of size 60 cm x 60 cm x 60 cm (internal size) with mild steel cover 6mm thick and angle iron frame of size 50 x50 cm x 6mm duly painted with two coats of synthetic enameled paint over a red oxide primer including locking arrtangement, brick work and all inner suraces of pit and exposed portion of out side shal be plastered in cement motor (1:4) complete all as specified and directed.
Material and labour for cutting, drilling and taping cast iron/ Ductile iron water mains (in position) for branch connection of the internal dia 150 to 200 mm including necessary fittings such as ferrules, nipple short pipe etc complete all as specified and directed.
S & F DI fitting for spigot socketed ductile iron pipes 80 to 300 mm bore such as bends (any tyupe, radius and angle), tapers any type straight, bend, increasing, decreasing or double socket etc), tee pieces, single branch, 'Y' junction, double branch, cross (all sockets or socket and spigot), collars, caps and plugs complete all as specified and directed.
S & F socket, elbow, reducer, nipple, Tee etc of any size or type suitable for GI pipe of bore as per requirement at site including cutting and threading of GI tubing complete all as specified and as directed.
M&L for 25mm thick PCC 1:2:4 type B1 using 20 mm graded stone aggregate laid over roof as in platforms for water tanks, finished even and smooth without using extra cement complete all as specified and as directed.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for laying cables and getting out in any type of soil for laying cable/erecting poles complete all as specified and as directed.
Returning and filling in soil including spreading leveling watering and well ramming in layers not exceeding 25 cm thick complete all as specified and as directed.
Removing surplus excavated material to a distance not exceeding 50 Mtr and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as specified and as directed..
Supply & fix Ductile iron pipe class K-9 ISI marked with internal cement mortar lining and external zinc and bitumen coated pipes 150 mm bore with all required DI fittings complete with push on rubber gasket joint complete all as specified and directed.
Supply & fix Ductile iron pipe class K-9 ISI marked with internal cement mortar lining and external zinc and bitumen coated pipes 100 mm bore with all required DI fittings complete with push on rubber gasket joint complete all as specified and directed.
Supply & fix Cast iron sluice valve, ISI Marked 150 mm bore flanged of class 1.0 PN having spindle made out of gun metal, operating wheel nuts, bolts, packing complete all as specified and directed.
Material and Labour for road cutting, including excavation, returning filling in, spreading, leveling, well ramming in layers, soiling with broken boudders/stones, thick coarse aggregate received from dismentling the existing road, premix, carpeting 25 mm thick using ready mix patch mate material, rolled and compacted for road patch, PCC repair work complete all as specified and directed.
M&L for construction of masonry valve pit with the following specification:- Brick work in CM (1:4) with sub class 'B' bricks, 15mm thick plastering in CM (1:4), PCC (1:4:8) type D-2 in foundation, chamber of internal size 900x900x1200 mm,150mm thick copping on top in PCC (1:3:6), type C-1, 3mm thick MS sheet for cover, angle iron 40mmx40mmx5mm for frame all around with suitable handle with locking arrangement including two coats of synthetic enamel paint over a coat of red oxide primed on MS work and three coats of white wash and preparation of surfaces complete all as specified and shown on drawing.
Material and labour for drilling and taping cast iron / Ductile iron water mains (in position) for branch connection of the internal dia 50 to 20mm including necessary fittings such as ferrules, nipple short pipe etc complete all as specified and directed.
Material and labour for boring hole under the road/pavment/hard standing with the help of trenchless technology using ultra sound technique and necessary machine including HDPE pipe of 150 mm dia suitable for 0.4 mpa working pressure not less than one metre below ground level complete all as specified and as directed.
Supplying, fixing & Hoisting in position and connecting, 2000 litres capacity rotational moulded polyethylene water storage tank (cylindrical, vertical with closed top thred type) 3 layer, including fixing arrangement for inlet/outlet/over flow and vent pipe of standard size all as specified in SSR Part-I complete all as specified and as directed.
M&L of Sub main wiring with two single core PVC Insulated cable two run of size 6.0 Sqmm multi-strand copper conductor FRLSH cable 1100 volts grade drawing in and including PVC conduit, medium grade not less than 25 mm dia with all conduit accessories and one run of 6.0 Sqmm multi-strand copper conductor FRLSH cable as continuous earth wire complete all as specified and directed. Note : - Two run of 6 Sqmm & one run of 6 Sqmm cable shall be measured as one unit run.
M&L of Sub main wiring with two single core PVC Insulated cable two run of size 10.0 Sqmm multi-strand copper conductor FRLSH cable 1100 volts grade drawing in and including PVC conduit, medium grade not less than 25 mm dia with all conduit accessories and one run of 10.0 Sqmm multi-strand copper conductor FRLSH cable as continuous earth wire complete all as specified and directed. Note : - Two run of 10 Sqmm & one run of 10 Sqmm cable shall be measured as one unit run.
Material & Labour for point wiring with three layer PVC Insulated 1.5 Sqmm multi-strand copper conductor FRLSH cable 1100 Volts grade drawn into and concealed PVC conduits medium grade not less than 20mm( ISI marked) including all fitting and fixing accessories including 1.25 mm thick sunken pressed steel terminal boxes/Modular metal flush box duly painted with two coats of anti-corrosive paint outside and two coats of aluminium paint inside with and including 3mm thick hylam brand laminated white bakelite sheet cover for mounting switches, sockets, fan regulators fixed with CP screws with cup wahsers and PVC insulated 1.5 Sqmm multi-strand copper conductor cable as earth wire and making good the disturbed surfaces with cement sand mortar 1:3 to match with the existing surfaces complete all as specified & directed by Engineer-in-charge for One light/fan/bell Point controlled by one switch.
Description all as per above Srl item No 41 but for one socket point 5 Amp controlled by one switch on same board complete all as specified and as directed.
Description all as per above Srl item No 41 but for one socket point 5 Amp controlled by one switch on Independent board complete all as specified and as directed. .
Description same all as per item No. 41 here in above but with 1100 Volts grade copper stranded conductor FRLSH cable of size 2.5 Sqmm main & with 2.5 Sqmm earth multi-strand copper conductor cable as earth wire for 3 pin switch socket outlet 15 Amp on Independent board complete all as specified and as directed.
S&F of frame plate for modular switch 1 module including screws and washers etc model/make as per existing in site complete all as specified and as directed.
S&F of frame plate for modular switch 2 module including screws and washers etc model/make as per existing in site complete all as specified and as directed.
S&F of frame plate for modular switch 4 module including screws and washers etc model/make as per existing in site complete all as specified and as directed.
S&F of frame plate for modular switch 6 module including screws and washers etc model/make as per existing in site complete all as specified and as directed.
S&F of frame plate for modular switch 8 module including screws and washers etc model/make as per existing in site complete all as specified and as directed.
S&F MS Housing box 1/2 module suitable for modular switch as per existing switch box and making good to the disturb surface complete all as specified and as directed.
S&F MS Housing box 4/5 module suitable for modular switch as per existing switch box and making good to the disturb surface complete all as specified and as directed.
S&F MS Housing box 6/8 module suitable for modular switch as per existing switch box and making good to the disturb surface complete all as specified and as directed.
S&F of modular switch 16 Amps one module 230 volts AC as per existing model/make complete all as specified and as directed
S&F of modular socket, 6A -2/3 pin combined 2 module, 230 volts AC as per existing model/make complete all as specified and as directed.
S&F of modular socket, 6/16A -2/3 pin combined 2 module, 230 volts AC as per existing model/make complete all as specified and as directed .
Supply & Fixing sheet metal enclosure MCB DB double door [Acrylic], single pole and neutral, 240 volts, 8 way with 200 Amp, 10 KA breaking capacity rated bus bar with blanking plate wherever required and IP-43 degree protection complete all as specified and as directed.
S&F sheet metal enclosure MCB DB double door [Acrylic], Triple pole and neutral, 440 volts, 4 way with 200 Amp, 10 KA breaking capacity rated copper bus bar with blanking plate wherever required and IP-43 degree protection complete all as specified and as directed.
S&F MCB Triple Pole and Neutral 63 Amps,415 V ,10KA breaking capacity complete all as specified and as directed.
S&F in replacement MCB Single Pole and Neutral 240Volt, 63 Amps,10KA breaking capacity complete all as specified and as directed.
Supply & Fixing single pole and netural sheet metal enclosure with a two pin and earth plug and socket complete with 01 number single pole MCB 20 Amps complete all as specified and as directed.
M& L Complete removal of existing treatment Washing, rubbing down and stopping of distempered and painted surfaces incl Priming plastered and other surfaces with alkaliresistant priming paint of wall and then applying two coats of oil bound distemper over and including 2mm thick wall care putty on wall including primer over wall care putty complete all as specified and as directed
Material & Labour for earthing complete with galvanised steel earth plate electrode of size 600mm x 600mm x 6mm thick burried directly in ground (Earth pit not less than 2.25 m deep below the normal ground level with top edge of earth plate not less than 1.5 m below normal ground level) connected to galvanised earth wire 4 mm dia as earth wire or earthing lead by means of bolts, nuts, check nuts and washers of GI or steel complete as shown in Electrical Plate No. 3 of SSR-2009 (Part-I) including charcoal dust, common salt, 20mm bore GI medium grade watering pipe, MS Sheet funnel with wire mesh, including 15mm dia GI pipe light grade for protection of GI earth wire including PCC pit 1:2:4 type B-1 using 20mm graded crushed stone aggregate with angle iron 40X40X5mm frame 60mm thick RCC cover with 8mm # TMT bars @ 100 mm centre to centre both ways i.e. horizontal and vertical complete all as specified and as directed and testing for required value complete. Note:- If earth resistance of earthing is not found satisfactory it will be redone by the contractor without any extra cost to Govt.
Supply, laying or fixing or passing through pipe commissioning and testing of XLPE insulated, armoured heavy duty, electric cable of size 35 Sqmm 3.5 core with aluminium conductor, 1100 volts grade including suitable size lugs complete all as specified and as directed.
Supply, laying or fixing or passing through pipe commissioning and testing of PVC / XLPE insulated, armoured heavy duty, electric cable of size 120 Sqmm 3.5 core with aluminium conductor, 1100 volts grade including suitable size lugs complete all as specified and as directed.
M & L for cutting of roads /trenchless technology method for cable laying complete all as specified and as directed.
Supply and laying Sand cushioning to under ground cable in trenches/existing cable trenches/ducts in layers of 8 cm deep before laying the cable and 15 cm deep after laying and stretching the cable complete all as specified and as directed. Note: For measurement purpose only punned sand shall be considered.
Disconnecting, dismantling of existing old unserviceable LT Panel/Feeder pillar box and Design, supply, erection, commissioning and testing of outdoor type LT Panel, platform mounted, suitable for 3 phase 4 wire, 415 volts AC supply and having 4 Nos stepped type main copper bus bars of 400 Amps, looping & branch connection system shall be made with suitable rating copper bus bar having sleeves of colour coded .The chamber shall be painted with powder coated paint (Shade : RAL-7032) after 9 tank pre-treatment of surfaces. The LT Panel shall be provided with suitable Neoprene rubber gasket to make it completely dust and vermin proof and degree of protection not less than IP-66 and general construction conforming to IS : 13947. The LT Panel shall be made out of 3.15mm thick CRCA mild steel sheet and 3.00mm thick gland plate , front door (02 layers) and rear Door (01 layer) opening facility and 4 side slanting canopy type roof on top and mild steel channel (75 MC) base frame at bottom. All incoming MCCBs shall be marked with location and rating of MCCBs. The Feeder Pillar shall be provided with ventilation facility in the form of louvers for better heat dissipation in and including dismantling of old unserviceable LT Panel complere and including the followings :
CONTROL WIRING : All control wirings shall have to be carried out with 1100 volts rated FR grade PVC insulated multi-flexible type copper wire of cross sectional area 1.50Sqmm and shall be properly bunched, tied and dressed, ferrule marked for proper identification and crimped with suitable size and type of tinned copper lugs and shall be wrapped with PVC spring type tube near the door hinges. CABLE ALLEY- Cable alley shall be provided in both side of the panel of suitable space for all incoming and outgoing cables. Cable terminals shall be provided for conecting of all incoming and outgoing cables, INCOMING :- MCCB 250 Amps, 4 pole, 415 volts, 50 kA, 50 Hz, microprocessor based, electronic release -01 Nos OUTGOING : (a) MCCB 160 Amps, 4 pole, 415 volts, 36 KA, 50 Hz, adjustable thermal & Adjustable magnetic, Ics = 100%Icu, - 01 Nos (b) MCCB 100 Amps, 4 pole, 415 volts, 25 KA, 50 Hz,adjustable thermal & Adjustable magnetic, Ics = 100%Icu, - 02 Nos
(c) MCCB 63 Amps, 4 pole, 415 volts, 16 KA, 50 Hz, fixed thermal & fixed magnetic, Ics = 100%Icu, - 02 Nos (d) Digital volt meter 96mm x 96mm suitable to read 0 to 500 volts, accuracy class 1% - 01 Nos. (e) Digital Ammeter 96mm x 96mm suitable to read 0 to 630 Amps, accuracy class 1% - 01 Nos. (f) Current transformer (CT) of rating 630/5, tape wound, rated burden 5 VA - 03 Nos (g) LED indicator lamps complete with integral circuit and cluster LED, suitable to operate in 230-240 Volts AC supply - 1 set of 03 Nos (Red - 01, Yellow- 01, Blue - 01) (h) Control fuse holder, made of bakellite, 16 Amps rating, stud type, pannel door mounting complete with 01 No 02 Amps HRC fuse of suitable type- 03 Nos. (j) Copper bus bar of suitable size duly mounted on FRP bus bar insulators and marked with standard colour coded sleeves / tapes for all outgoing MCCBs
(k) LED Pilot Lamp of following colours : (i) RED - 01 No, YELLOW - 01 No, BLUE - 01 No. (l) 02 Nos.Danger Notice Plate duly written in Signal Red colour on aluminium plate in English and Hindi language and of size not less than 150mmx100mm shall be fixed on both front & rear door of the bus bar chamber. (m) Power contactor four pole with coil voltage 230 volt of capacity 25 Amps 50 cycles.- 01 Nos (n) Time switch microrex analog time switch -01 Nos (o) Pannel box made up of CRCA mild steel 3.15mm thick, duly powder coated with busbar and internal wiring all as per CPRI approved. Note : Panel will be manufactured by CPRI approved firm as indicated above. The contractor shall submit drawing of the panels to Engr-in-charge before procurementof LT panel for approval alongwith CPRI approval. Foundation will prepared as per instruction and rate of fondation deemed to be included in the quoted rates.
Supply and laying Brick covering with width equal to length of brick as mechanical protection to cable with well burnt sub class ‘B’ bricks laid dry flat complete all as specified and as directed.
Sachdeva Enterprises (BID ID -3102757)
RAINA SALES AND SERVICES (BID ID -3109486)
SHRI KRISHNA CONSTRUCTIONS (BID ID -3100660)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .