Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.1 LAccepted-AOC FLAT NO A 402 SHANKAR HEIGHTS NEAR CHETANA SCHOOL HAJI MALANG ROAD KALYAN EAST THANE MUMBAI 421 306 | THANE | MAHARASHTRA | 421306 | L1 | Accepted-AOC L1 | |
| 2 | L2₹37.1 L+₹3.0 L (8.75%)Rejected-Finance VILL RATTANPUR PO TEH JOURIAN DISTT JAMMU J K 181202 | JAMMU | JAMMU AND KASHMIR | 181202 | L2 | Rejected-Finance Not Reasonable | |
| 3 | L3₹37.5 L+₹3.4 L (9.95%)Rejected-Finance | L3 | Rejected-Finance Not Reasonable | |
| 4 | L4₹40.7 L+₹6.6 L (19.4%)Rejected-Finance | L4 | Rejected-Finance Not Reasonable | |
| 5 | L5₹54.8 L+₹20.7 L (60.6%)Rejected-Finance | L5 | Rejected-Finance Not Reasonable |
Tender Value
₹50 L
EMD Value
₹1 L
Closing Date
6 Jul 2023, 6:00 pmClosed
Sh Saurabh Gupta, EE
GE(W) Colaba, Mumbai
REPAIRS/REPLACEMENT TO OLD UNSERVICEABLE INTERNAL WIRING AND ACCESSORIES, REWINDING, PAINTING TO CEILING FAN, EXHAUST FAN, PEDESTAL FAN, GEYSERS IN OFFICERS MD ACCN UNDER GE WEST COLABA, MUMBAI
2023_MES_595565_2
8750/E8
Open Tender
Civil Works
Item Rate
270 days
GE(W) Colaba
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE(W) Colaba, Mumbai
₹1 L
Yes
11 Aug 2023
16 Jun 2023
8 Jul 2023
16 Jun 2023
6 Jul 2023
22 Jun 2023
Amount
Taking down carefully copper/aluminum submain wiring complete including all fixtures such as switches, bulk head fittings, building security light fittings, plug socket boxes etc and removing unserviceable materials from site of work and making good disturbed surfaces of walls, floors with cement mortar and white/colour wash to match with existing surfaces all as specified and directed
S&F Sub main wiring in repair, with two run of 10 sq mm stranded copper conductor PVC unseathed FRLSH wire along with 10 sq mm green colour wire as earth contuinity conductor connected to common earth dolly including PVC FR heavy duty conduit of adequate size (not less than 32 mm dia) for housing the wires for from Pannel / Main DB to house SPN DB all as specified & as directed . Note: Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB. Note: Mode of measurement two runs of 10 sqmm cable and one run of 10 sqmm earthing cable with PVC conduit shall be measured as one length.
S&F Sub main wiring in repair, with two run of 6 sq mm stranded copper conductor PVC unseathed FRLSH wire along with 6 sq mm green colour wire as earth contuinity conductor connected to common earth dolly including PVC FR heavy duty conduit of adequate size (not less than 25 mm dia) for housing the wires from panel / Main DB to house SPN DB all as specified & as directed. Note: Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB. Note: Mode of measurement two runs of 6 sqmm cable and one run of 6 sqmm cable with PVC conduite shall be measured as one length.
M&L for Sub main wiring in repair, with two run of 4 sq mm stranded copper conductor PVC unseathed FRLSH wire along with 4 sq mm green colour wire as earth contuinity conductor connected to common earth dolly including PVC FR heavy duty conduit of adequate size (not less than 25 mm dia) for housing the wires from Internal DB to DB including taking down old Unserviceable submain with all associated fixtures all as specified & as directed. Make : Finecab / Havells / Finolex as approved by GE Note: Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB. Note: Mode of measurement two runs of 4 sqmm cable and one run of 4 sqmm cable with PVC conduit shall be measured as one length.
Taking down carefully copper/aluminum point wiring (light, fan, socket or power) including all fittings and fixtures such as switches, pendant, lamp holder, regulators, switch socket outlet, bulk head fittings, tube light fittings, etc and removing unserviceable materials from site of work and making good disturbed surfaces of walls, floors with cement mortar and white/colour wash to match with existing surfaces all as specified and directed
M&L for point wiring (concealed type) with 1.5 sq mm, PVC insulated unsheathed (FRLSH), 1100 volts grade, multi-stranded copper conductor, in and including rigid non-metallic PVC heavy duty conduit (ISI mark), 19/ 20 mm dia size including cutting chases for conduits, sinking for boxes for concealed conduit wiring with all fittings and accessories including with and fix conecaled 1.2 mm thick pressed steel sunken box along with cover plate and frame, suitable for fixing moduler switch/ socket and unsheathed (FRLSH) single core multi-stranded copper conductor cable of size 1.5 sq mm green in colour as earth continuity conductor connected to common earth dolly and making good to the disturbed surfaces to match with the existing surfaces (fill up cement in gaps, finishing with putti and apply two coats of paint to match with the existing colour in disturbed surface area), as per IS specification and as specified in SSR Part-I for one light point / bell/ Exhaust fan / wall fan point controlled by one modular switch, 1 way 6/10 amps, 1 module. Make of Cable : RR Kabel / Havells / Finolex / Polycab Make of Conduit : Precision/ Prestoplast/ Polycab
All as per serial item No.6 here-in before but for one bell point controlled by one switch.
All as per serial item No.6 here-in before but for one ceiling fan point controlled by one switch & regulator
All as per serial item No.6 here-in before but for one 3 pin socket point 5 Amps on independent board
All as per serial item No.6 here-in before but for one 3 pin socket point 5 Amps on same board
All as per srl item No 6 here-in-before but for one socket point 15 Amp with 4 sq mm PVC unseathed FRLS wire along with 4 sq mm green colour wire as earth contuinity conductor connected to common earth dolly all as specified & as directed by engr-in-charge.
S&F Moduler Switch flush type single pole, one way 6/10 Amp all as specified & as directed Make - Legrand/indoasian/Havells
S&F Moduler Switch flush type single pole, one way 16 Amp all as specified & as directed Make - Legrand/indoasian/Havells
S&F Moduler socket 2/3 pin 6 Amp all as specified & as directed Make - Legrand/indoasian/Havells
S&F Moduler socket 6/16 A 2/3 pin all as specified & as directed. Make - Legrand/indoasian/Havells
S&F Moduler stepped type electronic fan regulator 450 watt flush type, two module all as specified & as directed. Make - Legrand/indoasian/Havells
S&F Moduler bell push, 2 modue, 10 Amp.all as specified & as directed Make - Legrand/indoasian/Havells
S & F calling bell ding dong type 230 volts all as specified and directed Make - Legrand/indoasian/Havells
M&L for point wiring with PVC insulated unsheathed single core multi stranded copper conductor 1.5 sqmm, 1100 volts grade cable, FRLSH, passing through PVC casing caping including modular PVC Gang box of suitable module for mounting of modular Switchs & Sockets as required at site along with one run of PVC insulated unsheathed multistranded copper conductor cable 1.5 sqmm (green colour) FRLSH as earth wire connected to earth dolly all as specified & as directed by engr-in-charge for one light point/ Exhaust fan/ Wall Fan point controlled by one switch including taking down old unserveceable point wiring. Make of Wire : RR Kabel / Havells / Finolex of ISI mark as approved by GE
All as per item No.19 above but One bell point controlled by one bell push.
All as per item No.19 above but One ceiling fan point controlled by one switch & regulator
All as per item No.19 above but for one light point controlled by two way switches (two way switch point wiring)
All as per item No.19 above but One 3 pin socket point 5 Amps on independent board
All as per item No.19 above but One 3 pin socket point 5 Amps on same board
All as per item No.19 above but for one socket point 15 Amp with 4 sq mm PVC unseathed FRLSH wire along with 4 sq mm green colour wire as earth contuinity conductor connected to common earth dolly all as specified and as directed.
S&F switch piano type in replacement of one way 5 Amps all as specified and directed Make - Legrand/indoasian/Havells
S&F switch socket type in replacement of existing switch socket- combination 6/15 Amps all as specified and directed Make - Legrand/indoasian/Havells
S&F switch socket type in replacement of existing switch socket- combination 5 Amps all as specified and directed Make - Legrand/indoasian/Havells
S&F Regulator in replacement of existing Step type regulator all as specified and directed Make - Legrand/indoasian/Havells
S&F calling bell push in replacement of existing bell switch type all as specified and directed Make - Legrand/indoasian/Havells
S&F in repair, ceiling rose surface bakelite 65 x 50 mm two to three terminals all as specified and directed.
S&F in repair Modular type AC Box, 4 Module with Socket and 20 Amp SP mini MCB in plastic box enclosure along with cover plate and top all as specified and directed. Make - Legrand/indoasian/Havells
S&F in repair Bell ding dong, in repair, AC, 230 volts, single pole complete all as specified and directed Make: Make - Legrand/indoasian/Havells
S&F in repair Modular electronic Bell ding dong 2 Module, AC, 230 volts all as specified and directed Make: Legrnd (Arteor) cat part No : 5734 42 or equivalent in Anchor / Havells
S&F Telephone socket - RJ11 with shutter - 1 module all as specified and directed Make :- Crabtree(Athena)/Anchor(Roma)/Legrand(Britzy)
S&F non-metallic PVC casing capping of size 25X12mm dia (for fixing the telephone cable and lan cable) all as specified and directed Make : Precision/ Pressfit/ Prestoplast /Asian
S&F in repairs LED building security light fitting 45 watt, luminaire fixture in IP 66 protection level output of LED lamp efficiency minimum 100 luman per watt after all losses, pressure die-cast aluminium housing LED Street light with GI clamp including connected accessories and bracket made of GI Pipe 50mm dia light grade 1.25 m long, bend to shape with two sets of MS flat iron clamps, nuts, bolts, washers all as directed by Engineer-in-Charge. Make Philips : cat pat No BRP409 LED060HENRPC S1PSU GR or equivalent in Wipro cat part No LR02-501-XXX-57-XX / Havells cat part No ENDURACITYLINERNEXGENSL45WLED757 SASYBOPC. Note : The rate quoted must be inclusive of 3 core 1.5sqmm cable for connecting the light to supply.
S&F in repairs LED Batten 20 watt 4 feet long fixed on pvc square for mounting the fittings and electrically conncected with suitable size of pvc insulated multistranded copper flexible cable from ceiling rose to light fitting (connector block of lamp fitting) all as specified and directed. Make:Havells Model No :20W Bajaj IVORA 20W CDL of Bajaj / havells / Wipro.
S&F in repairs surface mounted 9/10 watts LED tube light fitting and electrically conncected with suitable size of pvc insulated multistranded copper flexible cable from ceiling rose to light fitting all as specified and directed. Make:- Havells Model No E-lite LED Pride Plus NEO Cat pat NO : 10W Bajaj IVORA 10W CDL of Bajaj./havells/wipro
S&F in repairs 20 watt smart extruded aluminium LED batten high efficiency inbuilt sensor, 4 feet long fixed on pvc square for mounting the fittings and electrically conncected with suitable size of pvc insulated multistranded copper flexible cable from ceiling rose to light fitting (connector block of lamp fitting) all as specified and directed Make: Bajaj No- BCLAB 20W LED PS /Havells / SHAKTI/ Wipro.
Supply and fix in repairs for Exhaust fan Plstic body having 70 watt power double ball bearing high speed of sweep size 300 mm ,inbuilt bird guard and air delivery more than 450 CMM with nuts bolts ,fastners including connecting with PVC insulated and PVC sheathed copper flexible cable and necessary fixing arrangement complete all as directed. Make - Bajaj BAHAR 300MM METTALIC GRAY / Havells / CROMPTON.
Supply and fix in repairs for Exhaust fan Plstic body having 70 watt power double ball of bearing high speed of sweep size 225 mm ,inbuilt bird gaurd and air delivery more than 450 CMM with nuts bolts ,fastners including connecting with PVC insulated and PVC sheathed copper flexible cable and necessary fixing arrangement complete all as directed. Make - Bajaj BAHAR 225 MM METTALIC GRAY / Havells / CROMPTON.
S&F in repairs Philips 11.5 Watts Smart Light strip Plus with suitable size LED driver White / Warm White and fixed in ceiling / wall with 2 Nos PVC block suitable size all as specified and as directed. Make- Philips Cat part No- 915005240701 WW
S&F in repairs LED Mirror light fittngs 6w extruded polycarbonate, golden type, 2 feet integrated electronic driver and fixed to wall with 2 Nos PVC block suitable size all as specified and as directed Make- Philips Cat part No- 91921580323
S&F in repairs Ceiling fan with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00. with brushless direct current motor (BLDC making all electric connection. huck and suitable size rod for hanging ceiling fan all as specified and directed Make Bajaj/Havell's/CG.
Supply and fix Fan condenser 2.5/4 mfd all as specified and directed. Make-Tipcon/Bajaj/Usha
S&F moduler/plastic/steel type junction box with hylam sheet of size 4"x4", 4"x7" and 6"x8" all as specified and directed
S&F moduler/plastic/steel type junction box hylam sheet of size 10"x12" and 8"x10" all as specified and directed
S&F moduler/plastic/steel type junction box hylam sheet of size 12"x12"
S&F in repairs Exhaust fan Metal body having high speed 1325 rpm of sweep size 200 mm, inbuilt bird gaurd and air delivery more than 450 CMM with nuts bolts, fastners including connecting with PVC insulated and PVC sheathed copper flexible cable and necessary fixing arrangement all as specified and directed. Make - Bajaj MAXIMA DXI 200MM / Havells / CROMPTON.
S&F LED 36 Watt 3000 K, Slim raccess mounted LED panel 2x2 with premium diffuser to ensure glare free & even light distribution, with integrated electronic driver of same make connecting with PVC insulated and PVC sheathed copper flexible cable and necessary fixing arrangement all as specified and directed. Make - BAJAJ/Havells / Wipro/ Jaguar
S&F repairs LED 36 Watt 6500K, Slim raccess mounted LED panel 2x2 with premium diffuser to ensure glare free & even light distribution, with integrated electronic driver of same make connecting with PVC insulated and PVC sheathed copper flexible cable and necessary fixing arrangementall as specified and directed. Make - BAJAJ/Havells / Wipro/ Jaguar
Supply and fixing / laying cable in repair PVC insulated screened PVC bedded, unarmoured, sheathed, electric power cables 1100 volts grade with stranded copper conductor of size 2.5 Sqmm 3 core with non metalic PVC FR, heavy duty conduit of suitable size (20mm dia or more), with shaddle all specified and directed Note: Mode of measurement 2.5 Sqmm 3 core cable with PVC conduite shall be measured as one length.
Supply and fixing / laying cable in repair PVC insulated screened PVC bedded, unarmoured, sheathed, electric power cables 1100 volts grade with stranded copper conductor of size 4 Sqmm 3 core with non metalic PVC FR, heavy duty conduit of suitable size (20mm dia or more), with shaddle all specified and directed Note: Mode of measurement 4 Sqmm 3 core cable with PVC conduite shall be measured as one length.
Supply and fixing / laying cable in repair PVC insulated screened PVC bedded, unarmoured, sheathed, electric power cables 1100 volts grade with stranded copper conductor of size 6 Sqmm 3 core with non metalic PVC FR, heavy duty conduit of suitable size (20mm dia or more), with shaddle all as specified and directed Note: Mode of measurement 6 Sqmm 3 core cable with PVC conduite shall be measured as one length.
Supply and fixing / laying cable in repair PVC insulated screened PVC bedded, unarmoured, sheathed, electric power cables 1100 volts grade with stranded Aluminium conductor of size 6 Sqmm 3 core with non metalic PVC FR, heavy duty conduit of suitable size (20mm dia or more), with shaddle all specified and directed Note: Mode of measurement 6 Sqmm 3 core cable with PVC conduite shall be measured as one length.
S&F in repairs decorative wall mounting fitting, working on 240 volts, 50 hz AC supply fittings comprising with stainless steel finish fixture with opal glass diffuser and with led bulb of capacity 7 WATT all as specified and directed Make:- Philips / Havells / Wipro
S&F in repairs bed side LED light fitting (floding / flexible type) of capacity 8 Watt, including LED bulb of capacity 8 Watt, electrically conncecting with suitable size of pvc insulated multistranded copper flexible cable from ceiling rose to light fitting (connector block of lamp fitting) all as specified and directed. Make: Philips or equivalent in Osram / Havells / Wipro .
S&F in repairs LED spot light fitting (moving / flexible type) of capacity 7 Watt, including LED bulb of capacity 7 Watt, electrically conncecting with suitable size of pvc insulated multistranded copper flexible cable from ceiling rose to light fitting (connector block of lamp fitting) all as specified and directed. Make: Philips / Havells / Wipro .
S&F in repairs single pole and neutral enclosure, with two pin and earth plug and socket 20 Amp with one single pole MCB all as specified and directed.
S&F in repairs sheet metal enclosure double door, for DBs when MCBs to be used 240 volts 4 way without bus bar and fixed on wall duly grouted in solid block wall or on wooden board in and including copper lugs/thimbles duly crimped for connection all as specified and directed.
S&F in repairs sheet metal enclosures, double door, for DBs when MCBs to be used 240 volts 8 way without bus bar and fixed on wall duly grouted in solid block wall or on wooden board in and including copper lugs/thimbles duly crimped for connection all as specified and directed.
S&F in repairs sheet metal enclosures, double door, for DBs when MCBs to be used 240 volts 12 way with 200 Amps rated bus bar single pole and neutral fixed on wall by cutting chasing and making good to the disturbed surfaced board in and including copper lugs/thimbles duly crimped for connection all as specified and directed.
S&F in repairs DB vertical type 4 way TPN, double door load line powder coated alongwith 200 Amp rated Bus bar fixed on wall duly grouted in solid block wall or on wooden board in and including MCCB 125 Amps copper lugs/thimbles duly crimped for connection all as specified and directed. Note: Thimble/lugs of rating of MCCB should be used with wire for fixing in the MCB
S&F in repairs MCB TPN, 32 to 60 amps, 'C' series, breaking capacity 10 KA, 'C' curve 240 volts, 50Hz including necessary incoming and outgoing electric connection with suitable size of copper lugs all as specified and directed
S&F in repairs MCCB 200 Amp, 4 pole, 415 V, Adjustable type, with breaking capacity 36 KA all as specified and directed.
S&F in repairs MCB SP, 240 volt, 6 to 32 Amps, C series all as specified and directed. Note: Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB
S&F in repairs MCB SPN, 240 volt, 40 to 63 Amps, C series all as specified and directed. Note: Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB
Supply and laying sub main wiring (Concealed type) in repair, for AC Point/ DB to DB with two run of 4 sqmm stranded copper conductor wire (FRLSH) with one run of 4 sqmm stranded copper conductor as earth continuty conductor connected to common earth dolly including adequate size and including rigid non-metallic PVC heavy duty conduit (ISI marked), 19/ 20 mm dia suitable size including cutting chases for conduits all as specified and directed including taking out of old U/s sub main wiring of any size Note: Mode of measurement two runs of 4 sqmm cable and one run of 4 sqmm cable shall be measured as one length. Make of Cable : Anchor / Havells / Polycab
S&F ceiling fan with blades, down rods,electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC making all electric connection. huck and suitable size rod for hanging ceiling fan all as specified and as directed. Make Bajaj/Havell's/CG.
S&F in repairs down rod 1 metre long, made out of 15mm GI pipe, heavy duty, ISI marked having provision of fixing U clamp with and including drilling in pipe at top and bottom for fixing Fan motor assembly, painting with the superior quality white colour synthetic enamel paint all as specified and directed . Make of GI Pipe : Tata / Jinda
S&F in repairs down rod 2 metre long, made out of 15mm GI pipe, heavy duty, ISI marked having provision of fixing U clamp with and including drilling in pipe at top and bottom for fixing fan motor assembly, painting with the superior quality white colour synthetic enamel paint all as specified and directed. Make of GI Pipe : Tata / Jinda
Fixing only Exhaust Fan on walls/ windows by providing wooden frame and other necessary tools to fix the exhaust fan all as specified and directed .
Labour only for servicing of ceiling fan at site of any size and make including oiling, greasing, cleaning of blades, checking of working speed, quarter pin, rubber real and replacement of unserviceable parts and taking down, rehanging after cleaning, servicing the fan as and when required bases all as specified and directed.
All as per srl item No 74 here-in-before but for Exhaust fans of any size and any make
All as per srl item No 74 here-in-before but for Wall fans of any size and any make
Labour only for tanking down, transportation to workshop, unscrewing body parts of ceiling fans of any make/brands & opening of the stator & rotor of ceiling fans of 1200 mm sweep size, excluding cutting & taking out worn out copper winding of fans, filling the warnish insulation between each winds & covering each loops of winding by sleeves and reassembling and refixing after repair complete fan by fixing servicable old and new parts of fans i.e. rubber bush of condensor & shackle housing, condensor, gun metal bushes, ball bearings all as per manufacturers design and delivery including greasing, oiling & testing of fans all as per manufacturers design & speed all as directed and specified by Engr -in-Charge Notes :- (i). The quoted rate shall be deemed to be inclusive of taking out defective parts and fixing new parts, all new parts shall be measured and paid separately vide relevant items of the schedule. (ii). The rates for refixing & taking out servicable parts shall be deemed to be included in the quoted unit rates. (iii). New parts shall be of respective makes of fans. (iv). New copper windings shall be measured and paid in supply only vide relevant items of the schedule. (v). The quoted unit rates shall also include writing of MES No of fans (vi) After reassembling all fans shall be tested for the speeds as directed. (vii) Transportation of fans from AGE E/M store to winding workshop is deemed to be included in quoted rates.
All as per srl item No 77 here-in-before but for 1400 mm sweep
All as per srl item No 77 here-in-before but for Air circulation fans / Padestal fan
All as per srl item No 77 here-in-before but for Wall fan 400 mm
All as per srl item No 77 here-in-before but for Exhaust fans of 150mm to 300 mm size and any make
M&L for taking out copper winding from ceiling fans and rewinding with new copper super enammelled wire of required guage and quantity for ceiling fans 1200 mm sweep all as specified and directed.
M&L for taking out copper winding from ceiling fans and rewinding with new copper super enammelled wire of required guage and quantity for ceiling fans 1400 mm sweep all as specified and directed.
M&L for taking out copper winding from wall fans and rewinding with new copper super enammelled wire of required guage and quantity for wall fan 300 / 400 mm sweep all as specified and directed.
M&L for taking out copper winding from Padestial fans and rewinding with new copper super enammelled wire of required guage and quantity for Air circulation fans 600 mm / Padestial fan 600mm sweep above all as specified and directed.
M&L for taking out copper winding from Exhaust fans and rewinding with new copper super enammelled wire of required guage and quantity for Exhaust fans of 200/225/250mm sweep all as specified and directed.
M&L for taking out copper winding from Exhaust fans and rewinding with new copper super enammelled wire of required guage and quantity for Exhaust fans of 300mm sweep all as specified and directed.
M&L for taking out copper winding from Exhaust fans and rewinding with new copper super enammelled wire of required guage and quantity for Exhaust fans of 450mm sweep all as specified and directed.
S&F in repair elctronic Fan regulator 450 watt 2 module all as specified and directed .
S&F in repair elctronic Fan regulator 450 watt 1 module all as specified and directed .
S&F in repairs modular type fan step regulator, 120/ 280 volts, 2 module all as specified and directed . Make : SSK
S&F in repair modular type elctronic Fan regulator 450 watt 1 module all as specified and directed . Make : SSK
S&F in repairs U clamp heavy duty, with rubber reel of superior quality & nut & bolts with locking pin arrangement all as specified and directed Note : - The rates for refixing & taking out servicable parts shall be deemed to be included in quoted unit rates.
Supply and fix in repair PVC canoppy cover superior quality all as specified and directed
S&F in repairs down rod 60cm long, made out of 15mm GI pipe, heavy duty, ISI marked having provision of fixing U clamp with and including drilling in pipe at top and bottom for fixing Fan motor assembly , Painting with the superior quality white colour synthetic enamel paint all as specified and directed. Make of GI Pipe : Tata / Jindal
S&F in repairs down rod 1 mtr long, made out of 15mm GI pipe, heavy duty, ISI marked having provision of fixing U clamp with and including drilling in pipe at top and bottom for fixing Fan motor assembly, painting with superior quality white colour synthetic enamel paint all as specified and directed . Make of GI Pipe : Tata / Jinda
S&F in repairs down rod 4 mtr long, made out of 15mm GI pipe, heavy duty, ISI marked having provision of fixing U clamp with and including drilling in pipe at top and bottom for fixing Fan motor assembly, painting with the superior quality white colour synthetic enamel paint all as specified and directed . Make of GI Pipe : Tata / Jinda
M&L for cleaning of the fan motor assembly body, blade of ceiling fan, filling the cavity & painting the ceiling fan 1200 mm sweep with one coat of superior quality synthetic enamel paint by spraying appratus and spraying process including writing the MES number on the ceiling fans of 1200mm sweep with black colour synthetic enamel paint, including taking down and refixing at site and all as specified and as directed.
All as per srl item No 98 here-in-before but for 1400 mm sweep
All as per srl item No 98 here-in-before but for Exhaust fans of 200/ 225/ 250mm sweep plastic
All as per srl item No 98 here-in-before but for Exhaust fans of 300mm sweep plastic
All as per srl item No 98 here-in-before but for Exhaust fans of 450mm sweep
Supply only bearing No 6201 Make : NBC, SKF
Supply only bearing No 6202 Make : NBC, SKF
Supply only capacitor 2.5 MFD, dry type. Make: Amcap, Epscon, Havells
Supply only capacitor 4 MFD, dry type. Make: Amcap,Epscon, Havells
Supply only gun metal bush, suitable for 1200/1400mm sweep fan & exahust fan of any sweep
Supply and fix lay cable in repair insulated screened PVC bedded, unarmoured, sheathed, electric power cables 1100 volts grade with stranded copper conductor of size 0.5 Sqmm 2 core (from ceiling rose to fan) all specified and directed Makes for cable :- Polycab / Plaza / Asian cable
Supply only fan blade set heavy duty suitable for Ceiling fan of size 1200mm sweep.
Supply only fan blade set heavy duty suitable for Ceiling fan of size 1400mm sweep.
Supply only fan blade set heavy duty suitable for exhaust fan / pedestal fan / air circulated fan / table fan above 200 mm and upto 450 mm sweep as per sample all as specified and directed
M&L for fan motor assembly body suitable for Exhaust fan 200 mm plastic body including taking down and refixing at site and all as specified and as directed.
M&L for fan motor assembly body, suitable for Exhaust fan 225 mm plastic body including taking down and refixing at site and all as specified and directed.
M&L for fan motor assembly body, suitable for Exhaust fan 300mm plastic body including taking down and refixing at site all as specified and directed.
M&L for fan blade assembly body, suitable for Exhaust fan 200 mm plastic body including taking down and refixing at site all as specified and directed.
M&L for fan blade assembly body, Exhaust fan 225 mm plastic body including taking down and refixing at site all as specified and directed.
M&L for fan blade assembly body, suitable for Exhaust fan 300mm plastic body including taking down and refixing at site all as specified and directed.
M&L for disconnecting and taking down the defective storage type water heater (Geyser) of 15 Ltr/25 Ltr/35 Ltr/50 Ltr capacity and refxing in same position after necessary repairs complete all as directed. Note :- The repairs and renewal will be measured & paid separately under the respective item of this schedule
S&F in repairs heating element 2.0 KW capacity of appropriate shape suitable for storage type water heater (Geyser) all as specified and directed Make:- M/s Recold/Pearl/Ditz
All as per item No 119 above but 1.5 KW capacity .
All as per item No 119 above but 5.0 KW capacity .
S&F in repairs repair thermostat of appropriate capacity and rating ISI marked suitable for 15 Ltr/25 Ltr/35 Ltr/50 Ltr capacity storage type water heater (Geyser) all as specified and directed.
S&F in repairs Inner tank made out of stainless steel provided with safety valve suitable for 25 Ltr capacity storage type water heater (Geyser) all as specified and directed.
All as per item No 123 herein before but 50 ltrs capacity .
S&F in repairs Outer made out of mild steel and of appropriate shape/size suitable for 50 Ltr capacity geyser all as specified and directed.
S&F in repairs Outer made out of mild steel and of appropriate shape/size suitable for 25 Ltr capacity geyser all as specified and directed.
s&F in repairs glass wool of superior and approved quality, suitable for 25 ltr and 50 ltr capacity storage type water heater (Geyser)all as specified and directed.
S&F in repairs indicators with flexible cable cord, pin top by providing new indicator (Green/ Red) assembly with 3 core flexible cord of stranded copper conductor 2.5 Sqmm PVC insulated & over all PVC sheathed 1100 volts grade 1.5 m long duly connected to geyser with and including 3 pin top 15 Amp AC 230 V ISI marked suitable for 25 Ltr/35 Ltr/50 Ltr capacity Geyser all as specified and directed.
S&F in repairs flexible hot water connection pipe with SS nuts heavy duty ISI marked internally metal coated suitable for fixing from outlet of water pipe to inlet of geyser and from geyser to inlet of hot water pipe and carrying hot water upto 70 degree centrigrate of length 600mm all as specified and directed.
All as per item No 129 herein before but 900 mm length
S&F in repair anchor fastner stud bolt with nut and washer and pin (heavy duty) suitable for fixing of geyser to wall/ angle iron of length upto length 150mm all as specified and directed.
S&F in repairs NRV by providing new cast copper alloy NRV 15 mm dia all as specified and directed.
M&L for preparing old geyser of 25/35/50 Llitres capacity of any make by removing all dust, dirt, scale, scrapping out old patchy paint and applying two coats of synthetic enamel paint all as specified and directed.
S&F in repairs safety valve for geyser of any cap/size all as specified and directed.
S&F electric plug top 20 Amps 240 Voltall as specified and directed.
Rama Construction Co
Panther Facilities
Ashish Enterprises
A P ENTERPRISES
Bidder Name
A P ENTERPRISES
Ashish Enterprises
Rama Construction Co
Panther Facilities
GUPTA ENTERPRISES
stage.html
html • 0.05 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .