Additional Improvement Work to the Students Toilet at Corporation Middle School Tatabad in Ward no 68

Amount

Earth work excavation in all soils and Sub Soils with initial lead and lift including all Labour Charges as per the Direction of the Departmental officers etc. complete.

Cement concrete 1:4:8 mix ( One Cement, Four Sand , Eight Aggregate)using 40mm size HBG metal from approved quarry including mixing, laying, compacting, curing and all labour charges Complying with Standard Specification etc. complete

Centering with steel plates for sides & soffits using Ms sheets stiffend with MS angle for boarding including decentering after completing of Curing period complying with standard Specifications as per the direction of departmental offiers etc., complete.

Supply fabrication and placing imposition of mild steel for steel rod of various sizes as directed including all labour charges for cutting and binding and tying with cost of binding wire, etc., complete as per standard specification.

R.C.C. 1:1.5:3 Mix (One cement one point sand Three hard broken granite stones) for all the reinforced cement concrete works using 20mm gauge hard blue granite stone jelly including cost and conveyance of all materials to site including all labour charges for concrete mixing, laying, watering curing properly excluding cost of steel and centering etc., complete complying with standard specification.

Flyash Brick work in cement morter 1:5 mix (One Cement, Five Sand) using 2nd Class Ground moulded chamber burnt bricks from approved chamber with standard size (230 x 110 x 70 mm ) and quality as per the Direction of the departmental officers etc., Complete.

Plastering on Wall surfaces using cement mortar 1:5 (One part of cement, five parts of sand by volume) thickness 12mm (average) for all internal/external surfaces like superstructure, rainwater ducts, elevation

Filling with Well Gravel in layer by layer including cost and conveyance of all materials and labour charges etc. complete.

Fabricating Supply and fixing and position of MSdoors with single leave.The door outer frame will be 40x40x6mm MS angle , the shutter frame will be 35x35x6mm, MS angle intermediate stiffner will be 35x35x6 mm with cross stiffner 25x25x5 mm flats covered with 18 gauge M.S.sheet with necessary hinges, tower bolts , al drop length 30mm and hold fast etc., complete with one coat red oxideprimer.

Painting with Enamel paint of approved colour and quality over New iron work for doors, windows, grills, weldmesh, screen etc., as per the direction of the departmental ooficers Etc., Complete.

Supplying and Laying Hydraulic Pressed Paver Block Providing and laying of 63 mm thick high strength of Hydraulic Pressed Paver Block in size of minimum compressive strength of 40 N/mm2 In uniform shape of approved make to be laid in flurring bone pattern with stone dust cushion below the uniform shap of approved non skitting surface in the top and the rate including leveling the base perpareation of pavers as sub base, stone dust cushion 150 mm thick laying out of pavement cut the pieces to fix the edge vibring the paversl sweeping transporting loading unloading of laying paver block as per the standard specifications

Supply of RCC precast slab 75mm thick in C.C. 1:2:4 mix using 20m baby jelly including water curing, moulding charges etc., complete.

Hoisting the RCC precast slab of all thickness including Pointing,water curing charges etc., complete.

Supply and Fixing of PVC Water Tank including all cost of Materials and Labour Charges etc Complete

Flooringwith Cement based Hydraulically pressed Anti skid tiles (pattern design)-20mm thick of approved colour and quality in cementmortar 1:3mix and pointing with the same mortar etc. complete and finish very neatly

Painting with Floor Guard Water Proof Paint two Coat including all cost of Materials and Labour Charges etc Complete

Supply of PVC Pipes and Specials

50 mm UPVC Pipe

50 mm UpVc Elbow

50 mm UPVC Ball Valve

50 mm UPVC FTA

50 mm PVC Pipe

50 mm PVC FTA

50 mm PVC Tee

50 mm PVC Elbow

40 mm UPVC Pipe

40 mm UpVc Elbow

40 mm UpVc Tee

40 mm UPVC Tank Nipple

40 mm UPVC Ball Valve

40 x 25 mm UPVC Reducer

25 mm UPVC Elbow

40 mm PVC 6KSC

110 mm Grating

15 mm Two Way Tap

15 mm Long Body Tap

250 mm PVC Pipe 6KSC

Add :- GST @ 18%

R SELVARAJ (BID ID -1351059)