Construction work of 50 Kennel Animal Birth Control Centre (ABC), Dog Shelter Shed work & Boundary Wall under Nagar Parishad Khagaria area.

Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m

Making 25 cm (10") dia bore up to 4 mtr depth below ground with hand auger of approved quality in ordinary soi! (vide classification of soil item A ) true to plumb and without eccentri city in any stage of operation and disposal of the excavated earth up to 50 mtr , Lead in eluding all lifts , all complete as per approved disign and direction of E/l Details of cost for 4 piles of 4 m= 16 mtrs depth )

Earth work in excavation in foundation trenches or drains (not exceeding 1.5 min width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5m . including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

Supplying and Filling in plinth with local sand and under floors including,watering, ramming consolidating and dressing complete

Providing designation 100 A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/l,

Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level. 1:2:4(1 Cement: 2 coarse sand :4 graded stone aggregate 20 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement-All work puto plinth level

Reinforced cement concrete work in wall (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts, etc. upt floor five level excluding cost of centring, shuttering, finishin and reinforcement. 1:1:5:3(1 cement: 1.5 coarse sand:3 graded stone aggregate 20mm nominal size)

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars. (Fe 500 D)

Centering and shuttering including strutting, propping stretching etc. complete for and removal of form work by sheet plate or ply wood shuttering for :

Brick work with bricks of class designation 100A in foundation sand plinth in :

Cement mortar 1 .:4 (1 cement: 4 coarse sand )

Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4(1cement:2:2 coarse sand :4 graded stone aggregate 20mm nominal size)

Brick work with bricks of class designation 100A in foundation sand plinth in : Extra for Brick work in superstructure above plinth level upto floor V

Cement mortar 1:4 (1 cement: 4coarse sand)

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to penings/ wooden frames with rawl plugs screws etc

Cement plaster in course sand 12 mm cement plaster of mix: 1:6(1 cement: 6 coarse sand)

Cement Plaster in coarse sand 15mm thick cement plaster of mix (1 : 6 )

6 mm cement plaster to ceiling of mix :(1:4)

Finishing walls with water proofing cement paint of approved brand and manufacture and of required shade to give an even shade. New Work (three or more coat)

Providing and fixing M.S. Fan clamp type 1 of 16 mm dia M.S. Bar bent to shape with hooked ends in R.C.C. Slab during laying including painting the exposed portion of loop all as per standard desing complete.

Painting on steel surface grill with synthetic enamel paint of approved brand and manufacture of required colour to given an even shade new work (Two or more coats) including a coat of approved steel primer but excluding a coat off mordant solution.

Providing and fixing aluminium sliding door bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete:

Providing and fixing aluminium handles, ISI marked, anodised (anodiccoating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, withnecessary screws etc. complete: 125 mm

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Single rubber stopper

Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles of approved quality with necessary screws etc. complete .

Providing and fixing aluminium tee channels (heavy duty) with rollers & top end in pelmets as curtain rod.

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.

Providing and fixing bright finished brass· casement window fastener with necessary screws etc.complete.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrouth framed and fixed in postion sal wood.

Providing and fixing flush door shutters decorative type core of block board construction with frame of 1st class hard wood and well matched teak ply veneering with vertical grains or cross bands and face venears on both faces of shutters 30 mm thick including stanless steel.

Providing and fixing of steel glazed doors, windows and ventilators of standra rollet section joint mitered and welded with 15x3 mm lugs 10 cm long with steel lugs embedded in cement concrete block 15 x 10 x 10 cm of 1:3 : 6 (1 Cement 3 coarse sand 6 graded stone aggregate 20 mm nominal size or with wooden pluge and screws or rewl pluge and screws or with fixing clips or with bolts and nuts as required including providing and fixing or glass panes with glazing clips and special coast of approved steel primer, excluding the cost of metal beading and other fitting except necessary hinges or pivots

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give and even shade two or more coats on new work over an under coat of suitable shade with ordinary pain of approved brand and manufacture

Providing and applying white cement based puttyof average thickness 2 mm with all complete job

Providing and applying one coat of cement primer of approved brand and manufacture with all complete job

Providing and applying one coat of cement primer of approved brand and manufacture with all complete job

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness sqm 799.40 to be specified by the manufacturer) of ist quality conforming to IS :15622 of approved make in colours such as white , Ivory , Grey , FumeRed , Brown, laid on 20 mm thick Cement motar 1:4 (1 cement: 4coarse sand) including pointing the joints with white cement and matching pigment etc., complete.

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS:15622 (Thickness to be specified by them anufacture )of approved make inall colours, shades except burgundy, bottle green ,black of any size as approved by Engineer-in-charge in skirting, risers of steps and dadosover 12mm thick bed of cement Motar 1:3(1cement: 3 coarse sand) and jointing with greycement [email protected] includingpointing inwhitecementmixedwithpigment ofmatching shade complete.

Providing and laying vitrifed floor tiles in different sizes {thickness to bespecified by the manufactruer) with water absorption's less than 0.08 % and conforming to IS : 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand ) including grouting the joint with white cement and matching pigments etc., complete. Size of Tile 60x60 cm

Steel work in built up tubular

ProvidingcorrugatedG.S. sheet roofing includingvertical / curvedsurface fixedwithpolymercoatedJorLhooks, boltsandnuts8mmdiameterwith bitumenandG.I. limpetwashersorwithG.I. limpetwashersfilledwithwhite lead, includingacoat of approvedsteel primer and twocoatsof approved paintonoverlappingofsheetscomplete(uptoanypitchi nhorizontal/vertical or curvedsurfaces), excluding thecost of purlins, raftersand trussesand including

Providing and fixing plain GS sheet gutter with iron brackets 40x3 mm size, bolts nuts and washers etc. including making necessary connections with rain water pipes complete. providing and fixing 16cm wide 45 cm overall semi circular plain GS sheet gutter with iron brackets 40x3mm size bolts nuts and washers etc. including making necessary connections with rain water pipes complete. 0.8 mm thick. G.S. Sheet Gutter both side of the structure.

Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m

Earth work in excavation in foundation trenches or drains (not exceeding 1.5 min width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5m . including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

Making 25 cm (10") dia bore up to 4 mtr depth below ground with hand auger of approved quality in ordinary soi! (vide classification of soil item A ) true to plumb and without eccentri city in any stage of operation and disposal of the excavated earth up to 50 mtr , Lead in eluding all lifts , all complete as per approved disign and direction of E/l

Excavating, supplying and filling of local earth by mechanical transport upto a lead of 3 km with all complete job.

Supplying and Filling in plinth with local sand and under floors including,watering, ramming

Providing designation 100 A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building

Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level.1:2:4(1 Cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring,shuttering,finishing and reinforcement-All work puto plinth level .1:1.5:3

Reinforced cement concrete work in wall (any thickness) including attached pilasters, buttresses, plinth and string courses,fillets, columns, pillars, piers, abutments, posts and struts etc upto floor v level excluding cost shuttering(1:1.5:3)

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding upto floor level including cost of binding wire, wastage and over laps upto

Thermo-Mechanically Treated bars. (Fe 500 D or more)

Columns, Pillars, Piers, Abutments, Posts, Struts

Brick work with bricks of class designation 100A in foundation sand plinth in :

Brick work with bricks of class designation 100A in foundation sand plinth in :

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Cement plaster in course sand 12 mm cement plaster of mix: 1:6(1 cement: 6 coarse sand)

Finishing walls with water proofing cement paint of approved brand and manufacture and of required shade to give an even shade. New Work (three or more coat)

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to penings/ wooden frames with rawl plugs screws etc

Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade:(including priming)

Providing and laying vitrifed floor tiles in different sizes {thickness to bespecified by the manufactruer) with water absorption's less than 0.08 % and conforming to IS : 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand ) including grouting the joint with white cement and matching pigments etc., complete. Size of Tile 60x60 cm

Providing and laying factory made cement Concrete paver blocks of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50 mm thick compacted bed of fine sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with jamuna sand and cutting of paver blocks as per required size and pattern,finishing and sweeping extra sand

Earth work in excavation in foundation trenches or drains(not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m . including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete.

Providing designation 100 A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/l,

Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level. 1:2:4(1 Cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size)

Brick work with bricks of class designation 100A in foundations and plinth in : Cement mortar 1 .:6 (1 cement: 6 coarse sand )

12 mm cement plaster 1:4( 1 cement: 4 coarse sand) finished with a floating coat of near cement

Replacement of M.S. foot rests in manholes including dismantling concrete blocks and fixing with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) : With 20x20 mm square bar

Centring and shuttering including strutting,propping etc. and removal of form for Foundations, footings, bases of columns etc. for mass concrete.

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement-All work puto plinth level 1:1:5:3(1 cement: 1.5 coarse sand:3 graded stone aggregate 20 mm nominal size)

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Mild steel 5.5 mm dia .

Boring/drilling borewell of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job,all complete as per directionofEngineer-in-charge, upto 90 metre depth below ground level (All types of soil)

Supplying,assembling, lowering and fixing in vertical position in borewell, unplasticized PVC medium well casing(CM)pipe of required dia, conforming to IS:12818, including required hire and labour charges, fittings & accessories etc.all complete, for all depths,as per direction of Engineer -in-charge

Supplying, assembling, lowering and fixing in vertical position in borewell unplasticized PVC medium wellscreen(RMS) pipes with ribs, conforming to IS: 12818, including hire& labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge

Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge.

Development of tubewell in accordance with IS:2800(part I) and IS:11189, to establish maximum rate of us able water yield with out sand content (beyond permissible limit), with required capacity air compressor, running he compressor for required time till well is fully developed ,measuring yield of well by"V" not chmethodor any other approved method,measuring static level & drawd own etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete,including hire & labour charges of air compressor, tools & accessories etc.,all as per requirement and direction of Engineer-in-charge

Providing and fixing suitable size threaded mild steel capor spot welded plate to the to pof bore well housing/casing pipe, removable as per requirement, all complete for borewell of

Providingand fixingM.S. clampof requireddia tothe topof casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete.

Providing and fixing Bail plug/Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I)

Establishment of 1.0 HP submersible pump set with all fittings (rate analysis attached)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & coldwater supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 32 mm nominal bore.

Earthwork in excavation in foundation trenches or drains (not exceeding 1.5 min width or 10sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5m . including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

Making 25cm (10") dia bore upto 4mtr depth below ground with hand auger of approved quality in ordinary soi! (vide classification of soil item A) true to plum band without eccentri city in any stage of operation and disposal of the excavated earth upto 50mtr ,Lead ineluding a lllifts, all complete as per approved disign and direction of E/l Details of cost for 4 piles of 4m=16mtrs depth )

Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete.

Providing designation 100 A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/l,

Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level.

Brick work with bricks of class designation 100A in foundation sand plinth in :

Cement mortar 1 .:4 (1 cement: 4 coarse sand )

Providing Brick bat filling and direction of E/I.

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring ,shuttering, finishing and reinforcement-All work puto plinth level 1:1:5:3(1 cement: 1.5 coarse sand:3 graded stone aggregate 20 mm nominal size)

Reinforcement forR.C.C.work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars TMTC-500-10mm dia

Centring and shuttering including strutting ,propping etc. and removal of form for. Foundations, footings, bases of columns etc. for mass concrete.

Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low fixtures complete, including cutting and making good the walls andlevel white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS :7231, with all fittings and floors wherever required :White Vitreous china Orissa pattern W.C. pan ofsize 580x440 mm with integral type foot rests size 580x440 mm with integral type foot rests

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lidW.C. pan with ISI marked white solid plastic seat

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :One urinal basin with 5 litre white P.V.C. automatic flushing cistern

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require :White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS : 13983 with C.I. brackets and stainless steel plug 40 mm,including painting of fittings and brackets, cutting and making good the walls wherever required :510x1040 mm bowl depth 178mm

Providing and fixing 600x120x5 mm glass shelf with edges round off,supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 32mm

Providing and fixing PTMT liquid soap container 109 mm wide,125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.

Providing and fixing PTMT towel ring trapezoidal shape 215mm long, 200 mm wide with minimum distances of 37 mmfrom wall face with concealed fittings arrangement of approvedquality and colour,weighing not less than 88 gms.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.600 mm long towel rail with total length of 645 mm,width 78 mm and effective height of 88 mm

Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2" BSP thread and shapes, weighing not less than 60 gms.

Providing and fixing on wall face unplastidsed-PVC (working pressure 4 kgfper sqm)sanitary pipes conforming to IS :4985 including jointing with sealring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. 110 mm Dia.

Providing and fixing on wall face unplasticised -PVC molded fittings/accessoriesfor unplasticised-PVC sanitary pipes conforming to(S:4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.

Providing and fixing unplasticised -PVC pipe clip of approved design tounplasticised PVC rain water pipe by means of 50x50x50mm hard woodplugs, screwed with M.S. screws of required length including cutting brickwork and fixing on cement mortar(1:4) 1 cement: 4corsa sand and making good the wall etc complete. 110 mm

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of E/C.

Providing and fixing C.P. brass long nose bib cock ofapproved quality conforming to IS standards and weighingnot less than 810 gms.15 mm nominal bore

Providing and fixing C.P. brass stop cock (concealed) ofstandard design and of approved make conforming toIS:8931.15 mm nominal bore

Providing and fixing PTMT pillar cock of approved qualityand colour .15 mm nominal bore, 125 mm long foam flow,weighing not less than 120 gms

Providing and fixing PTMT grating of approved quality andcolour.125 mm nominal dia with 25 mm waste hole

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, withcover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes butwithout fittings and the base support for tank.C.P. BRASS FITTINGS

Making 25 cm (10") dia bore up to 4 mtr depth below ground with hand auger of approved quality in ordinary soi! (vide classification of soil item A ) true to plumb and without eccentri city in any stage of operation and disposal of the excavated earth up to 50 mtr , Lead including all lifts , all complete as per approved disign and direction of E/l Details of cost for 4 piles of 4 m= 16 mtrs depth)

Providing designation 100 A one brick EDGE soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/l,

Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete.

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring ,shuttering, finishing and reinforcement-All work puto plinth level 1:1:5:3(1 cement: 1.5 coarse sand:3 graded stone aggregate 20 mm nominal size)

Brick work with bricks of class designation 100A in foundation sand plinth in :

Cement plaster in course sand 12 mm cement plaster of mix:

Centring and shuttering including strutting,propping etc. and removal of form from two sides

Reinforcement forR.C.C.work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars TMTC-500-10mm dia

Finishing walls with water proofing cement paint of approved brand and manufacture and of required shade to give an even shade. New Work (three or more coat)

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to penings/ wooden frames with rawl plugs screws etc

Painting with ready mixed paint of approved brand and manufacture

Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal

Earthwork in filling

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit with piano type switch, phenolic laminated sheet, suitable size M.S./PVC box etc as reouired.(SWITCH- ANCHOR,CONA,KANY) (WIRE-FINOLEX, HAVELLS) Group C

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. ANCHOR,CONY, KNAY

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.ANCHOR,CONY, KNAY

Wiring for light/power plug with 2x4 sq mm FR PVC insulated copper conductor single core cable in surface /recessed medium class PVC conduit with 1no 4 sq mm FR PVC insulated copper conductor single core cable fof loop earthing as requird. (WIREFINOLEX,HAVELLS,ANCHORS)

Wiring for circuit/submain wiring alongwith earth wire with the following sizes of FR insulated copper conductor single core cable in surface/recessed medium class PVC conduit as required. (WIRE-FINOLEX, HAVELLS)

Supplying and fixing following way, single pole & neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus - bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 12 way, double door (HAVELLS, STANDARD)

Supplying and fixing following way, horizontal type three pole & neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus - bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/ Isolator) 6 way ( 4 + 18 ), double door, horizontal type (HAVELLS, STANDARD)

Supplying and fixing following rating, 240/415 volts "C" curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc as requird. With HPL,HAVELLS,STANDARD

Supplyig and fixing 3 pin 5 amp ceiling rose on the existing junction box / wooden block including connections as required. ANCHOR,CONA, KNAY

Supplyig and fixingbrass batten/ angle holder including connections as required. ANCHOR,CONY, KNAY

Supplying and fixing Ding-Dong call bell suitable for single phase, 230 volts complete as required

Supplying and fixing of following types lamp in the existing electrical fitting/ fixtures etc. as required.

Supplying and fixing wall mounted light bracket/ fixture made with polycarbonate suitable for single 9/10 watt LED lamp directly on wall including connections etc as required. ( But without lamp )

Supplying and fixing following types LED street light with minimum efficacy 100 lm/w in die cast aluminium housing, toughened glass, lP 66 protection and complete with electronic driver etc on pole/building including connection earthing the body etc as required. 90 watt

Supplying and fixing of 32 mm dia X 1.00 metres long G.t. pipe (medium class) bracket for mounting of fluorescent /HPMV/ HPSV/ LED street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required.

Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 amps "C" curve, SP MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc. as required

Supplying and fixing stepped type electronic fan regulator on the existing modular plate/ switch box including connections but excluding modular plate etc. as required ANCHOR,CONY, KNAY

Supplying and fixing modular blanking plate on the existing modular plate & swltch box but excluding modular plate as required

Supply and installation of regular/standard model A.C. ceiling fan of 1200 mm sweep with service value (CM/MM) minimum 4.00, Air delivery minimum 270 cum/min including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated copper conductor etc as required.

Supply and fixing of 250 mm sweep (1300/1400 RPM) sweep/ sizes PVC/ABS square body Exhaust Fan with automatic openable louvre shutter in existing opening including making connection, testing etc as required.

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections etc. as required. 250 Amps, 36KA, FPMCCB (With HAVELLS,STANDARD,HPL)

Supplying and fixing following rating, 2401475 volts, "C" curve, miniattlre circuit breaker suitable for lnductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 6 A to 32 A, double pole

Providing and fixing 200 Amp capacity four pole on load/ panel mounted changeover switches inside the existing cubical panel board including drilling holes in cubicle panel, making connections etc. as required.

Supplying and fixing wall/floor mounted cubical panel board, fabricated with 16 gauge iron sheet, suitable for panel mounted switch disconnector, including bus-bar chamber, insulator and painting etc. as required. (but without busbar copper strip)

Supplying and fixing 50 mm X 5 mm copper strip (2.30 Kg/mtr)

Supply and fixing panel mounted digital multimeter (Voltmeter & ammeter) including CT coil and RYB pilot indictor in the existing cubical panel board including drilling holes in the panel board making connections etc as required.

Supplying and fixing 3.5 core,70 sq mm XLPE/PVC insulated PVC shealed (Heavy duty ) armoured electric cable with aluminium conductor with Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. Above 95 sq mm & upto 185 sq mm.With HAVELLS,CAP-CAB CAPITAL

Providing , laying and fixing of 80mm dia G.l. pipe (medium class) in ground complete with G.l. fittings including trenching (75 cm deep) and re-filling etc as required.

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering watering pipe 2.7 metre long etc. with charcoal/ coke and salt as required.

Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing etc. as required.