REPAIR TO JOINERY, ALUMINIUM DOORS/ VENTILATORS ,STEEL WINDOWS / DOORS/ VENTILATORS CUP BOARD, ROLLING SHUTTER, STEEL DOOR, PVC DOOR, WOODEN DOORS AND WINDOWS IN CERTAIN MD ACCN AT CME

Amount

Taking down Chowkats or Frames, not exc. 1.50 Sqm Each with Shutters (without Taking Off Shutters from the Frames), complete all as specified and as directed.

Taking down Chowkats or Frames, exc. 1.50 Sqm but not exc. 4.00 Sqm Each with Shutters (without Taking Off Shutters from the Frames), complete all as specified and as directed.

Taking down shutters only of size exc 1.00 Sqm but not exceeding 2.00 Sqm

S&F 2nd class hard wood plain solid straight chowkhats and frames, wrought, framed rebated on the solid rounded or chamferred,put together with glue pinned at joints etc. complete all as specified and directed

Dismantling framed timber frame work 40 sq. cm and less in section, in any position

M&L preparing surfaces of wood and wood based and treating ends of posts, back of chowkats. Etc area exc 0.1 sqm but n.exc 0.5 sqm each complete all, as spcified and directed.

S& fixed factory made plain framed paneled shutters 35mm thick of 2nd class hard wood (any number of panels) with panels of timber flat on both sides feather edges or panel of 9mm BWP commercial ply over 12mm thick veneered panticle board with commercial face veneers fixed to chowkhat . The size of rail and stile as per IS : 1003 (Part-1), kiln seasoned and chemically pressure treated complete all as spfd.

S&F 30mm thick flush shutter, solid core construction, with block board core and both face is covered with decorative face veneer with lipping/frame to match complete all as specified and directed.

S& fixed 2nd class hard wood 35 mm thick made glazed and skeleton shutters open rebated and prepared to receive glass, gauze,etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc, size of members of shutters as spfd in SSR Part-1, Section 8, clause 8.24 (a) complete all as specified and directed .

Mild Steel works as in bands straps, hold fasts etc, conforming to IS-2062-2006 (Fe-290), embedded portion duly painted with bituminious paint and sanded, complete all as specified.

S & F solid PVC door frame of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube etc all as specified and as directed.

S&F Factory Made Solid Panel PVC Door Shutter 30mm thick (Style) consisting of Frame made out of Mild Steel Tubes for Top and Bottom Rails, Mild Steel Frame shall be covered with heat moulded Plain Colour PVC 'C' Channel having a PVC Sheet Strip of 20mm width stuck inside with Solvent Cement for Stiles and Plain Colour PVC Sheet for Top Rail, Lock Rail and Bottom Rail on either Side and as Gap insert for Top Rails & Bottom Rail, Panelling of Plain Colour PVC Sheet to be fitted in the Mild Steel Frame welded/sealed to the Stiles and Rails with suitable PVC Sheet Beading and Joined together with Solvent Cement and fixing in the Frame at Site as per Specifications and Draw-ings, complete all as specified and as directed.

M&L for Preparing New Wood and Wood Based Surfaces of any description, over 100mm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a Coat of Pink Primer, complete all as specified and as directed.

M&L for Preparing old Wood and Wood Based Surfaces of any description, over 100mm width or girth and applying one Coats of Synthetic Enamel Paint (First quality) complete all as specified and as directed.

M&L preparing old Steel and Iron Surfaces of any descriptions, over 10 cm in width or girth and applying one Coats of Synthetic Enamel Paint , complete all as specified and as directed.

S & F 100 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 .

S & F 100 mm Butt hinges, heavy weight, cold rolled mild steel, and fixed .

S & F 150 mm Aluminium handles, cast type anodised

S&F 200 mm long aluminium anodized barrel tower bolt of extruded section complete.

S&F 300mm long Aluminium alloy, anodised , sliding door bolt with hasp , staple,(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

S&F stainless Steel Wire Cloth, 0.36mm nominal dia of Wire and average width of aperture 1.4 mm and fixed with Tinned Tacks of SS Wire Stapes, fixing etc, complete all as specified and as directed.

S&F in repairs stainless Steel Wire Cloth, 0.36mm nominal dia of Wire and average width of aperture 1.4 mm and fixed with Tinned Tacks of SS Wire Stapes, complete all as specified and as directed.

S&F Mild steel 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F in repairs mild steel 300mm ordinary rat tail rod pattern springs including roller and roller plate etc complete all as specified and directed.

S&F in repair 150mm long door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed as directed.

S&F 150mm long door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed as directed.

S&F in repairs heavy duty steel magnetic catch for cabinet, Drawer,Door etc all as specified and directed

S&F in repairs 3mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares n.exc 0.5 sqm size in each pane complete all as specified and directed .

S&F in repairs 3mm thick figured glass pin head type and glazing with oil putty or wooden beads in squares n.exc 0.50 Sqm each pane complete all as specified and directed.

S&F in repairs 4mm thick ordinary glass Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified and directed by Engr-in-Charge.

S&F for aluminum anodized three track sliding window with two or more shutter with 4 mm thick plane glass, one shutter of stainless steel mosquito proofing with good quality bearing ,handle lock,etc rubber beading and glazing clips etc using following sections as given in 'JINDAL' catlogue including taking down existing old window of any description complete all as sspecified and directed.

S&F aluminium anodised louvered ventilator with 4 mm thick pin headed glass and 100 mm wide glass strips, white framed and fixed with aluminium anodised frames etc including taking down existing old window of any description complete all as sspecified and directed.

Taking down existing aluminium door window frame with shutters exceeding 1.50 sqm and not exceeding 4 sqm each for necessary repair work incl (replacement of ss wire mess, glass, snap beading, secrews, stays, rubber neoprene packing, rubber neoprene packing aluminium handles, etc) and refixing in same opening incl easing and adjusting and also refixing builders hardware as required incl renewal of unserviceable screws, etc complete all as specified and dir.

Dismantling wrought iron or mild steel work of any description not otherwise provided for etc all as specifed and directed.

M&L for framed work such as grills or grating etc with ends of bars shouldered as framed guard bars conforming to Fe-410-0 or 310-0 all as specified and directed.

M&L preparing New Steel and Iron Surfaces of any descriptions, over 10 cm in width or girth and applying two Coats of Synthetic Enamel Paint incl one coat of red oxide, complete all as specified and as directed.

S&F in repair 18/19 mm Block boards, grade 2 quality, interior grade, decorative type with decorative face veneer on one face, fixed with screws to timber frame-work complete all as specified and directed

M&L 12 mm plywood grade BWR, type BB, fixed with screws to timber frame work and fixed in repairs

M&L 6 mm plywood grade BWR, type BB, fixed with screws to timber frame work and fixed in repairs

Resecuring or easing & adjusting , without taking down of shutter in the same opening of any description and size complete all as specified and directed.

M&L for 2nd class hardwood for plain fillets,square, rectangular or triangular in section, clean sawn, secured with nails or brads, exc 13 & n. exc 25 sq. cm second class H/W complete all as specified and directed.

S&F continuous (piano) hinges, mild steel, bright finish or electrogalvanised width of flaps (when open) in 30mm complete all as specified and directed.

S&F 40mm dia cupboard knobs fixed with nut, screws and washers of mild steel bright finish complete all as specified and directed.

S&F in repais 150mm hasp and staple, aluminium anodised , wire type stove enamelled black, including bolt to hinge plate and fixed with screw.complete all as specified and directed.

S&F 150mm hasp and staple, aluminium anodised , wire type stove enamelled black, including bolt to hinge plate and fixed with screw.complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation boards/slabs/blankets, any thickness, including cover fillets

M & L for false ceiling with 4mm thick designer 'E' board fixed on GI grid work with powder coated finish on exposed surface of size 0.6 x 0.6m consisting of GI angle supported on wall of size 24mm x 28 x 0.7mm main tee of size 24mm x38mm x 0.7mm cross tee of size 24mm x 28mm x 0.7 mm using porpose made members interlocking to each other and with with 3mm dia GI wire and making holes etc all as directed including two coats of white wash on ceiling after preparation of surfaces and as per manufacture instruction .

S&F 1.25mm thick steel rolling shutters, without ball bearing as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in positionas indicated complete push pull or manual type including locking arrangement(Safety lever locks mild steel with 4 levers for rolling shutters) , two coats of aluminium paint over a coat of red oxide including taking down old rolling shutter of any description and size complete all as specified and directed.

M&L Welding in repairs n. exc 2.5cm in length to old doors for fixing hinges, tower bolt, sliding door bolt, handles, locking system, etc complete all as specified and directed.

S&F fixed in repairs aluminium sheet 0.56 mm thick fixed to door shutters with nails all as directed

S&F in repairs stainless steel 20mm dia curtain rods fixed to walls all as specified and directed.

S&F in repairs stainless steel 20mm dia curtain brackets with screw fixed to walls all as specified and directed.

Demolition of brick work or stone boulder masonry precast concrete block built in cement mortar complete all as specified and directed.

M&L for pre-cast PCC block masonary type C-1, 1:3:6 exc 10 cm width and set in CM 1:6 complete all as specified and directed.

M&L walling random rubble uncoursed , well bonded, bedded and solidly hearted built in CM 1:6 complete all as specified and directed

All as per item No 56 above but except stone complete all as specified and directed.

M&L 15mm thick cement plastering on block/stone masonry surfaces in CM 1:6 finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L 18/19mm thick Pre-laminated board exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination , fixed with screw to timber frame including taking down existing board of any description complete all as specified and directed.

S&F in repairs 40mm to 45mm stainless steel heavy duty sliding channels for cupboards/drawers etc fixed in walls etc all as specified and dir

S&F stainless steel plate rack of approved make incl taking down old unserviceable all as specifed and directed size 31x30x10 inch plate rack.

S&F heavy duty adahesive anti skid tapes of length 18mtr and 50mm wide for flat surfaces,steps, stairways, entrance, ramps etc all as specifed and directed.

(Applicable for above all items) (a). Contrator has to employ skilled/unskilled tradesman with adequate experience & required documents to be submitted to office , (b). Labour should wear contractors uniform with firm logo, failing which recovery should be made. (c). Minimum of 02 x teams of each trades shall be available for maint of urgent nature whenever called upon of any trade, failing which recovery will be initiated for not employing adequate labour at site. (d) Site clearance shall be done by contractor after finishing work. (e) All Scarps will be done with mechanical scaper (f) Mechanical scaper should be deposit in our store at the time of sample approval

ShreHari Civil Enginneering and Contractors (BID ID -3377667)

Sunrise Traders (BID ID -3376649)

Mukund Engineers and Contractors (BID ID -3375056)

vishalconstruction (BID ID -3376548)

Decent Decorators (BID ID -3377545)

M/S JAYCONSTRUCTION CO (BID ID -3377703)