Provision of parking on road side at Mubarikpur Bye pass road for way side Amenities.

Amount

Excavation in foundation trenches etc. in earth work in all kinds of classification of soil such as pick work, jumper work, pick jumper work, blasting work, soft and hard blasting and doing work in saturated soil, including chiseling or wedging out rock where blasting is prohibited, or any other mixed variety of soil including shoring, strutting, de-watering and pumping or bailing out water (surface and sub soil water) upto any depth or any quantum of water including slush which may arise during dewatering, removal of slush and stacking the excavated soil clear from the edge of excavation with in all leads, as directed by Engineer-in-Charge and then returning the stacked soil in 15cm (fifteen centimeters) layers when required into plinths, sides of foundations etc. consolidating each deposited layer by ramming watering and then disposing of all surplus excavated earth as directed by Engineer-in-Charge with in all leads and lifts, disposed earth to be levelled and neatly dressed including carriage of materials within all leads and lifts.

Exacavation for embankment with approved material obtained from borrow pits with a lift upto 1.5m transporting to site, spreading,grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 mtrs as per Technical Specifiacation clause 301.5 as per direction of engineer-in-charge.

Providing and laying mechanically mixed and vibrated concrete 1:4:8 (one cement isto four sand isto eight graded crushed stone aggregate (40mm) (forty millimeter nominal size) for plain/cement concrete in all heights/depths, in open foundation or under water, including pumping or bailing out water/ dewatering (surface and sub-soil water) and removal of the slush which may arise at the time of laying under water, for all heights/depths and any quantum of water, including cost of form work and curing complete in open foundation and the like etcetera complete, as per drawing and MORD technical specification section 800, 900, 200 and 1600 as per the satisfaction and the direction of Engineer-in-Charge including carriage of materials within leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, GST, toll tax, sales tax or any other taxes imposed by the Government.

Providing and laying of inter locking concrete block pavements having thickness 80mm (eighty millimeter) Grade M-40 IS Code-15658:2006 and Technical Specification Clause 1504 and as per the direction and the entire satisfaction of Engineer-in-Charge, including carriage of material with in all leads lifts and other incidentals. The rates including Royality, Malkhana, Octroi, GST, toll tax, sale tax or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated concrete for plain cement concrete Grade-M20 (M-Twenty) Nominal mix 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate (40mm) forty millimeters nominal size) in or under water in open foundation for all types of structure and the like in Catchpit flooring etcetera, including cost of form work and curing complete as per drawing and MORD technical specification clause 802, 803, 1202 & 1203 and as per the direction and the entire satisfaction of Engineer-in-Charge, including pumping or bailing out water/dewatering (surface and sub-soil water) and removal of the slush which may arise at the time of laying under water for all heights/depths and any quantum of water complete including carriage of materials up to all leads, lifts and other incidentals. The rates including Royality, Malkhana, Octroi, toll tax, sale tax or any other taxes imposed by the Government.

Providing form work with steel plates 3.15m thick welded with angle iron frame in 30x30x5mm so as to give a fair finish including centering ,shuttering,shutting and propping etc. with wood battens and ballies height of propping and centering below supporting floor to ceiling not exceeding 4 mtr and removal of the same for insitu reinforcement concrete and plain concrete work in a flat surface such as soffits of suspended floors,roofs,landing and the like.Floor etc. up to 200mm in thickness(Vertical Surfaces)

Steel work welded in built up sections, trusses and framed work including cutting ,hosting,fixing in position and applying a priming coat or red lead paint in beams joists channels,angles,tees flats pipes in railing as per design approved by Engineer -in- Charge.

Painting two coats (excluding priming Coat) on new steel and other metal surfaces with enamel paint brushing to give an even shade includes cleaning the surfaces of approved brand Nerolac/Asian as perdirection of engineer -in-charge.

Gaurav Kumar