Erection of 3.3KV overhead line for providing power supply to vehicle charging station at railway siding under Dipka Expansion Project (Route length - about 1.1 KM).

Trimming of tree branches under the over head line conductor and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared, etc. as required (Trimming of tree branches required for about 0.5 KM out of approx 1.1 KM OH line)

Erection/ replacement of 13 /16 mtr. long steel tubular poles including excavation of pole pit as per site conditions and grouting by cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 40 mm nominal size) etc (0.38 cum each pole)

Supplying and erection of galvanised stay set for 11 KV over head lines complete with 19/ 20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm thick, thimble, stay clamps, turn buckle (20 mm X 600 mm), 7/ 4.00 mm dia G.I. stay wire and 11 KV strain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required

Stringing of Dog conductor (all 3 Nos. conductor), including un-coiling from drum at stockyard, loading onto departmental vehicle, transporting to site and unloading, laying of conductor along route, stringing and binding on insulators and jumpering etc. as required.

Laying & stringing of 8 SWG GI wire earth

Fabrication of MS Channel/Angle/Flat for bracket or clamp as per requirement.

Supplying and fixing of MS nut, bolt of different size as required

Erection of cradle guarding wire between the span including binding of guard wire.

Supplying & erection of 11 KV disc insulator for 3.3 KV overhead lines with galvanised insulator fittings, ball and socket type and complete with galvanised strain clamps, bolts, nuts, washers etc. as required

Supplying and erection of 11 KV Pin insulator with G.I. bolts and nuts and spindle etc. as required.