Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹5.9 LAdmitted-Finance | L1 | Admitted-Finance | ||
| 2 | L2₹9.9 L+₹4.0 L (66.5%)Admitted-Finance | L2 | Admitted-Finance |
Tender Value
₹9.9 L
EMD Value
₹19,800
Closing Date
7 Aug 2026, 6:00 pmClosed
Er Karanjeet Singh
Executive Engineer PWD RandB Division Gandhi Nagar Jammu
Improvement and up-gradation of Lok Nirman Bhawan Office Complex Jammu (Under M.H-NFB 2026-27)
2026_PWDJK_318510_2
Short e-NIT No. DGN/52 of 2026-27 Dated 29-07-2026
Open Tender
Civil Works
Percentage
30 days
Lok Nirman Bhawan Complex Jammu
Please refer to e-NIT/SBD
3 documents required · 3 mandatory
₹600
Executive Engineer PWD RandB Division Gandhi Nagar
₹19,800
Jammu
19 Aug 2026
29 Jul 2026
8 Aug 2026
29 Jul 2026
7 Aug 2026
29 Jul 2026
1 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing and fixing of PVC wall panelling of superior quality of make like wall face or equivalent (0'-10" x 10'-0" @ 3.4 Kg/E) with necessary fittings / accessories (Make approved by E.I.C) complete job. | 1,270 | Sft | 110 | ₹1,39,700 |
| 2 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead of area of 3 sqm. and below. | 3 | Each | 285.25 | ₹855.75 |
| 3 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately) For fixed portion Powder coated aluminum (minimum thickness of powder coated 50 microns). | 194 | Kg | 514.3 | ₹99,774.2 |
| 4 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately). For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). Powder coated aluminum (minimum thickness of powder coated 50 microns). | 285 | Kg | 607.4 | ₹1,73,109 |
| 5 | Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-incharge. Pre-laminated particle board with decorative lamination on both sides. | 16.35 | Sqm | 933.35 | ₹15,260.27 |
| 6 | Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin-charge. (Cost of aluminum snap beading shall be paid in basic item). With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm). | 41.8 | Sqm | 1,201.8 | ₹50,235.24 |
| 7 | Providing and fixing of 3.5mm thick ACP sheets for Cabins, Partition of branded quality make approved by Engineer-in-charge (Complete job). | 229 | Sft. | 120 | ₹27,480 |
| 8Providing and fixing ISI marked oxidized M.S. handles conforming to IS : 4992 with necessary screws etc. complete : | |||||
| 8.1 | 125 mm. | 6 | Each | 41.8 | ₹250.8 |
| 8.2 | 100 mm. | 15 | Each | 32.45 | ₹486.75 |
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.74 MB
BOQ_1050105.xls
BOQ • 0.25 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .