Karnataka

Active

Works

Buildings

Construction of Laboratory cum classroom for Govt Upgraded Kannada Girls Primary and High school at Tumminkatti village of Ranebennur Taluk

Rural Development and Panchayat Raj Department

RDPR Division Office Haveri | Haveri, Karnataka

Amount: ₹24.2 LCloses: 16 Sept 20265d left

Timeline

Published28 Aug 2026
Closes16 Sept 2026

Tender Value

₹24.2 L

EMD Value

₹50,000

Closing Date

16 Sept 2026, 4:00 pm5d left

Tender Inviting Authority

Office Inviting Bids

Rural Development and Panchayat Raj Department

Contact Person

Executive Engineer

Office Number

Work Description

Construction of Laboratory cum classroom for Govt Upgraded Kannada Girls Primary and High school at Tumminkatti village of Ranebennur Taluk

Tender Information

Tender ID

RDPR/2026-27/BD/WORK_INDENT28799

Reference Number

RDPR/2026-27/BD/WORK_INDENT28799

Tender Type

Open

Product Category

Buildings

Form of Contract

Electronic Documents, First(One Cover)

Location

RDPR Division Office Haveri

Source Website

Subscribe to view

Documents Required

9 documents required · 9 mandatory

Technical Bid

RequiredPWD Registration Certificate Class-4 & above

RequiredPAN & GST Certificate

RequiredWorkdone Certifiate Satisfactorily completed as a prime contractor, at least one similar nature of work such as Building work of value not less than Rs. 12.08 Lakhs in any one year.-usually not less than 50 Percentage of the estimated value of contract 2021-22 to 2025-26. Work done certificates issued by the officer not below the rank of Executive Engineer. Work done certificate with work indent number is mandatory.

RequiredTo qualify for award of the Contract, each bidder should have attained in the last five years i.e. 2021-22 to 2025-26 achieved in at least two financial years a minimum financial turnover-Turnover certificate with Profit and loss statements and IT returns-in all classes of civil engineering construction works only Rs. 24.16 Lakhs

RequiredTenderer must have liquid assets and /or availability of credit facilities of not less than Rs. 7.25 Lakhs Credit lines/ letter of credit/certificates from banks for meeting the fund requirement etc. issued the Nationalised bank should be furnished by the contractor.

RequiredBid capacity

RequiredOngoing work details most attached with self attested if false information submitted tender will be rejected

RequiredPostal Address with contact number

RequiredWorkdone Certifiate Satisfactorily completed as a prime contractor, following quantities E/W- 98.52 Cum, RCC/PCC- 94.63 Cum, Steel Reinforcement- 4.38 Tonne 2021-22 to 2025-26. Work done certificate with work indent number is mandatory.

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)

Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)

Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing works

List of works for which tenders already submitted

Banker Details for reference

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

Proposals for subcontracting components of works amounting to more than 20% of the contract price (for each, the qualifications and experience of the identified sub-contractor in the relevant fields should be attached)

Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder.

The contractor should provide daily there staff members on site

If there is any objection regarding tender, eligibility of contractors, documents etc. The objection must be submitted before last date & time of submission of tender directly to Executive Engineer, PRE Dn, Haveri. (Not in inward).

All the scanned documents pertaining to bidder to be uploaded shall be in original & same original should be produced to The Executive Engineer (at the time of technical opening) who reserves right to verify the original documents before approval.

The work subjected to third party inspection and inspection by other govt agencies third party inspection cost is borne by the contractor at the rate of 0.5% of the gross amount of the bill third party agency is appointed by the dept.

Tenderer must have achieved in at least two financial years an average minimum financial Turn over (in all classes of civil construction works only) per financial year (ABSTRACT STATEMENT FROM CA OF 5 YEARS)

The original documents should be produced for verification at any stage of tender process as and when sought for, failing which the bidders are liable for disqualification.

Aspiring bidders/ contractors who have not obtained the user ID & Password for participating in E-Pproc in PRED,, may now obtain the same from the website www.epro.karnataka.gov.in through link contractors can contact Helpdesk HP-080 25201227 & 080 25501216

Bidders/ Contractors can access tender document on the website, fill them and submit the completed tender document into electronic tender on the website itself with in the stipulated date. The blank tender document can be obtained through our website www.epro.karnataka.gov.in where electronic tender form is provided. Additional conditions and information also can be obtained through the above mentioned site.

Contractors whose EMD has been forfeited already or black listed are not permitted to participate for this bid. Any tender submitted by such agencies will be rejected.

Incase of Cancellation of Tender, tender application fee will not be refunded or adjusted in any case.

Bidders/contractors should attach all the scanned copies of the certificates along with their registration copy with documents pertaining to the prequalification as mentioned above(as per condition No 3 on or before the last date and time mentioned through electronic tender in the website

Any arbitrary clause is not applicable to the above works. Conditional tenders are liable for rejection.

To qualify for award of the Contract, each bidder should have attained in the last five years i.e. 2021-22 to 2025-26: a) achieved in at least two financial years a minimum financial turnover (Turnover certificate with Profit and loss statements and IT returns) (in all classes of civil engineering construction works only) Rs: 24.16 Lakhs. with UDIN No. certified by Authourized charted Accountant. b) Satisfactorily completed as a prime contractor, at least one similar nature of work such as Building work of value not less than Rs.12.08 lakhs in any one year. usually not less than 50 percentage of the estimated value of contract. Work done certificates issued by the officer not below the rank of Executive Engineer. Work done certificate with work indent number is mandatory.

Any taxes shall be paid as per the prevailing orders at that time.

Bidder must be executed 80% of quantities in any one year during last 5 years i.e. 2021-22 to 2025-26 provided in BOQ , for the items stated in bid document

Participating bidders contractors in the tender should submit the following documents along with Technical Bid in addition to documents details required as per KW

Materials to be utiliszed for the work must be tested in PRED labs and quality control test reports must be enclosed to the bills. Cost of quality control tests must be borne by the contractor.

After Completion of Work Third Party/SQM/DQM Inspection Reports Submitt with the Bills

Successful bidder submitting bids below the amount put to tender will be regularized to submit the difference amount in the form of FDR/TDR/DD/Pledge on the name of EE PRED Haveri within 20 days from the date of receiving the letter of acceptance. additional security paid for unbalanced tenders Failing which EMD will be forfeited and further action will be taken as per G O No FD PCL 2008 Bangalore Dated 14/10/2008

The Eligible Contractor Should Agree the KW Bid Document Conditions.

The Work constructed under this programme shall be of very high standard, requiring no major repairs for three (1)years after completion of construction the contractors shall have to give guarantee for 1 years maintenance

The item rates are excluding GST but inclusive of all other charges.

GST shall be paid to the tendered amount separately

Any over writing of civil engineering words and measurements should be clarified the considered department ( No claims should be considered)

The Project Completion period is 5 months and the defect liability period of the work is (1) One year after successful completion of the work.

Tenderer must have liquid assets and /or availability of credit facilities of not less than Rs. 7.25 Lakhs Credit lines/ letter of credit/ certificates from banks for meeting the fund requirement etc. issued the Nationalised bank should be furnished by the contractor.

Only Class-4 & above registered contractors are eligible to apply for this tender

Fee & Financial Details

Tender Fee Amount

₹610

EMD Fee Amount

₹50,000

Important Dates

Last Activity

4 Sept 2026

Published

28 Aug 2026

Download Ends

15 Sept 2026

BOQ Preview

•

Construction of Laboratory cum classroom for Govt Upgraded Kannada Girls Primary and High school at Tumminkatti village of Ranebennur Taluk

•

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

•

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

•

Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...

•

Providing Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)

•

Providing Coursed rubble masonry (second sort) with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)

•

Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and ...

•

Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates an...

•

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

•

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

•

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and remov...

•

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor...

•

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colou...

•

Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...

•

Providing and laying Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and...

•

Providing and applying white cement based putty of averagethickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per spe...

•

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat ...

•

Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 ltr/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an eve...

•

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...

•

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a primi...

•

Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standar...

•

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...

•

Providing wall black boards in 12mm thick with CM 1:3 and applied with primer & two coats of acrylic emulsion black paint including finishing etc.,complete.

•

Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matt...

•

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal exp...

•

Conceiled Conduit System Supplying heavy gauge PVC conduit pipe . mm dia.mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running before conc...

•

Supplying and fixing PVC/metal conduit Deep junction box.25mm deep junction box

•

Supplying And Fixing Metal Fan Box with Round Hook.

•

Point wiring using Copper wire without switch.Supplying and wiring adopting loop system in existing PVC Conduit/casing capping using 1100V Grade, COPPER conductor flexible multistrand FRLS PVC insulat...

•

Wiring for lighting/Power circuit using one of FRLS PVC insulated 1100v grade, multistrand Copper With Low conductor resistance single core wire in open or conceanled system of wiring with specified I...

•

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8...

•

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6 Amps one way.

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 Stepped Fan Regulator.

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 32Amps DP switch.

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 12936/16Amps universal socket.

•

Supplying fixing of Surface mounting type retrofit type LED tube. W comprising of LED linear source with CCT 6500 degree K, CRI 70. efficacy 80 lumen per W, life 25000 burning hours and Compliance to ...

•

Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, necessary ...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

Girls primary and high school Tumminakatti.pdf

Others - Detailed Estimate • 9.69 MB

28799 KW 2.doc

Tender Document • 0.69 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .