Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹76,600
Closing Date
21 Oct 2024, 10:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Karnataka Power Transmission Corporation Limited
AEE-4
Providing New 03 Nos of 11KV MCVCB feeders to overcome existing overloaded feeders and Bus coupler between existing 11kV Bank-4 and new proposed 11kV Bank-6 and its allied equipments at 110/33/11KV MUSS Belur, Dharwad under on Partial Turnkey Basis.
KPTCL/2024-25/EL/WORK_INDENT1229
KPTCL/2024-25/EL/WORK_INDENT1229
Open
Electrical
Two Tender Document System(Two Cover)
KPTCL SEE Transmission Works and Mantainance Circle Hubballi
4 documents required · 3 mandatory · 1 optional
Bidder should have carried out the work of providing additional /replacement of 110/33/11kV Switchgears /CT/PT in KPTCL/ESCOMS/any Govt., or Public sector under takings in last five years on Total Turnkey or Partial Turnkey basis OR Should have carried out erection of all connected equipments of (01) One Transformer Bay of 110/66KV class or above voltage class on Total Turnkey or Partial Turnkey basis, including erection of Transformer, which shall be in satisfactory service for a period of One year prior to date of submission of the Bid.
Lead Bidder and Consortium Bidder should possess valid Super Grade Electrical Contractors License issued by the Government of Karnataka as on the date of opening of techno-commercial bid and shall upload the same along with other bidding documents failing which the offer will be rejected.
Minimum Average Annual Turnover (MAAT) of the bidder for best three years out of last preceding five financial years ending on March or December as the case may be, shall not be less than Rs. 57.41 Lakhs
The Bidder shall stand disqualified if the total value of Works on hand including contract against subject tender if awarded, exceeds 2 times the MAAT (minimum average annual turnover (Refer 11.6.2.4 of IFB).
The Consortium having combined Technical Qualification as at 3.1 and 3.2 along with Financial capability as at 4.0 are also eligible to participate in the Bid subject to the following (I) (a) Any one of the Consortium Partner shall meet the Technical Capability prescribed at 3.1 and 3.2.OR (b) The consortium partners shall individually meet the technical capability prescribed at 3.1 or 3.2.(II) Financial requirement prescribed at 4.0 shall be met by any of the consortium partners or jointly by both the partners of the consortium.
The bidder should provide detailed information on any litigation or arbitration arising out of contracts completed or under execution by it over the last five years with KPTCL. A history of awards involving litigations against the bidder or any party or JV may result in rejection of bid Bidders are requested to furnish the self-declaration stating the above and upload the same along with the other documents in the relevant field in the eprocurement portal failing which the offer is liable to be rejected.
Risk and cost declaration.
Approved Vendors: Bidders are requested to furnish an undertaking to source the supply of equipment/material from KPTCL approved Vendors only.
Non performance: The bidder should not have been disqualified for non-performance in any of the Government utilities in the past five years and bidder shall furnish a self-declaration to this effect, failing which the offer is liable to be rejected.
The bidder should not have been blacklisted by any Government Department/Power Utilities/Local Bodies of any state. A self declaration in this regard is to be uploaded.
No Deviation declaration.
Power of Attorney in favour of all the persons signing the documents.
Letter of Undertaking.
GST and PAN registration certificate.
EPF and ESI REGISTRATION CERTIFICATE ISSUED BY CONCERNED.
₹960
₹76,600
9 Oct 2024
9 Oct 2024
23 Oct 2024
15 Oct 2024
Material Portion
11KV, 1 Core 1000Sqmm XLPE UG Cable for connecting 11kV Bank-4 and proposed 11kV Bank-6 through bus coupler and adopter panel.(4 run each 100mtrs)
11KV, 3 Core 400Sqmm XLPE UG Cable (double run)
Copper control cable 19Core 2.5Sqmm from 11KV Switchgear to 11KV Annunciator panel.
4 core 6Sqmm copper control cable
Double Pole Structure complete including 5 Kg, 8 SWG GI Wire for Structure Grounding, 9Mtr RCC Pole 145kg WL and GI DP set
11 kv,400 Amps double break GOS
11 kV, 400 Amps Special Roaster GOS
H Frame for mounting GOS
Guy set with No. 15 Strain Insulator & Concreting materials
9KV, 5KA Lightning Arrester
RCC pole 8 meter long for yard LED lights Fixing
Supplying of LED 150 Watts Floodlight with pressure die cast aluminium housing body with optimal heat sink for better etc complete as per the specification.
11KV, Heat Shrinkable cable termination Kit for 1 x 1000Sqmm XLPE Cable-outdoor
11KV, Heat Shrinkable cable termination Kit for 1 x 1000Sqmm XLPE Cable-indoor
11KV, Heat Shrinkable cable termination Kit for 3 x 400Sqmm XLPE Cable-outdoor
11KV, Heat Shrinkable cable termination Kit for 3 x 400Sqmm XLPE Cable-indoor
Providing Bricks after laying cable
Rubber mat 2000mmx1000mmx19mm size tested for 15kV class
Equipments name plates and earthing name plates including fixing at outdoor yard(welding,fixing etc included)
Chequred plates wherever required as directed by KPTCL station Incharge
Erection Portion
Erection, alignment & fixing to the foundation indoor/outdoor 11KV switchgear panel unit including movement from the point of unloading to the point of erection.(includes switchgear and adopter panels...
Wiring and assisting in Testing and Commissioning of switchgear panel.
Laying of control cables from equipment to control panel
Laying of 11KV 3C x 400Sqmm HT UG Cable
Laying of 11KV 1C x 1000Sqmm HT UG Cable
Errection of DP structure including errection,excavation and fixing.
Errection of H Frame for mounting GOS
Errection of 11 kv,400 Amps double break GOS
Fixing Guy set with No. 15 Strain Insulator & Concreting materials
Errection of RCC pole 8 meter long for yard LED lights fixing
Fixing of Pot heads for 240/400/1000Sqmm HT cable indoor & Outdoor. Both ends
Grounding of equipment with 50 X 6 mm GI flat and connecting equipment to the earthmat/ groundpit. Each point of earthing with all formation works like binding twisting drilling of holes and connectin...
Grounding of equipments by provoding cast iron pipe of 100 mm ID 13mm thickness, 2.75 Mtr long with two part clamp out of GI flat 50 X 6 mm continuosly welded alround the pipe using cast iron welding ...
Supply and providing 450mm dia, 450mm height, 1.5" to 2" thick, Hume pipe collar (non pressure type) for earth pits including air lead & lifts etc..
Testing and Commissioning
Wiring, Testing and Commissioning of single 11KV indoor type switchgear panel.
Wiring: Identification of wires, ferruling crimping & termination of wires for annunciation, etc.. Testing of Relays, CTs...
Excavation for laying of cables
Earth work excavation for pipelines/cables by Manual means upto 600mm trench width, as per drawing and technical specifications, including setting out, shoring, strutti...
Supplying and filling in with sand under floors, foundation of Bridges including watering, ramming, consolidating and dressingcomplete
9 Mtrs RCC Poles: 9 Mtr long RCC Pole 300 kg WL for 11kV Outgoing feeders and for Yard lighting
Excavation 0.60x0.60x1.60=0.576
Base concreting: 1:4:8(0.60x0.10)=0.036Cmt
Pole concreting
TMT steel reinforcement
Jelly Spreading
Lean concreting for laying of jelly Mix 1:5:10 Using 40 mm nominal size graded crushed coarse aggregates
Spreading of Jelly ,supplying and spreading of 100 mm thick with 20/25 mm jelly with all lead and lift
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Docs_New.zip
Tender Document • 16.40 MB
NIT_Belur Call-3.pdf
Tender Document • 3.59 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .