GE/ALP (8355B) KOLKATA OF 2024-25

Amount

Demolition of cement concrete of any description and in any position not other wise specifically provided for complete all as specified and as directed. (upto 04 storey High of building)

M&L for PCC 1:5:10 Type E2 (using 40mm graded crushed stone aggregate) as in filling sunken floor complete all as specified and as directed.

M&L 25mm thick PCC 1:2:4 Type B-1 ( using 20 mm graded crushed stone aggregate) as in sub base of floor complete all as specified and as directed.

Supply and applying two coats of High performance elastomeric cementitious waterproof coating sandwiched with 45 GSM glass fibre reinforcement on the entire floor and 1.0 m of all walls of all toilets as per following methodology:- Cleaning of exposed concrete surface by mechanical means or by hydro blasting to remove laitance, loose particles, contamination etc. which may hinder bonding. Coving of RCC joints with PCC (1:1.5:3) mixed with Integral Water Proofing compound. Applying one coat of Waterproofing membrane to concrete surfaces followed by application of 45GSM glass fibre on the wet surface. Applying second coat of waterproofing membrane at the right angles to the direction of first coat. Second coat shall be applied after the first coat gets dry. Sprinkling fine aggregate immediately after the application of second coat to get the mechanical key for protective plaster. Curing to Water proofing membrane to be carried out for minimum period of 3 days with ponding complete. The Water Proofing Product Should have Mixed density: 1.68g/cc (brushable consistency). Adhesion to concrete : >1N/mm2. Static crack accommodation: 1mm.( Fosroc/Elantas beck/Kunal conchem) (upto 12 storey high building) (Make :- Fosroc/Elantas beck/Kunal conchem)

Supplying and laying for 40 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/walls including all brass fitting/fixtures in any grade to receive plumbing fittings and fixtures complete all as specified and directed

Dismantiling of floor hearth or wall tiling incl cement mortar (but not backing), and rubbish off the premises (out of MoD land), complete all as specified and as directed.

Material and labour for coloured (light) Glazed ceramic tiles of size (450x300x7-8)mm thick in verticle surfaces set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles laid over and including 10mm thick cement plaster in cement mortar (1:4) complete all as specified and as directed.

Material and labour for Non-Skid ceramic coloured floor tiles as in floor 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles laid over and including 15mm thick cement screed bed in CM (1:6) complete all as specified and as directed.

Material and labour for Non-Skid ceramic coloured floor tiles as in floor 7 to 8 mm thick (square/ rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm as in skirting etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles laid over and including 10mm thick cement plaster for backing coat in CM (1:4) complete all as specified and as directed.

M&L for Double charged vitrified ceramic coloured tiles 8-9mm thick (square /rectangular ) polished area of each tiles not exceeding 0.36 sqm as in flooring etc. set and jointed in neet cement slurry and pointed white or coloured cement to match the shade of the tiles laid over and including 15mm thick plaster in CM (1:6) for backing coat complete all as specified and directed .

M&L for Double charged vitrified ceramic coloured tiles 8-9mm thick (square /rectangular) polished area of each tiles not exceeding 0.36 sqm as in skirting etc. set and jointed in neet cement slurry and pointed white or coloured cement to match the shade of the tiles laid over and including 10mm thick cement plaster in CM (1:4) for backing coat complete all as specified and directed .

Dismantling cast iron or re-inforced concrete drain pipes of 100mm bore, jointed in cement mortar complete all as specified and as directed.

S&F CI spun pipes with out ears in any length fixed to wall with brackets of 100mm bore including bitummous paints both side complete all as specified and as directed.

S&F CI bend with door of 100mm bore complete all as specified and as directed.

S&F CI branch pieces single equal or unequal with door of 100mm bore complete all as specified and as directed.

S&F CI 'T' of 100mm bore complete all as specified and as directed.

S&F CI cowl of 100mm bore complete all as specified and as directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixingor removal to Store (measured overall as fixed along the centre line over fittings and accessories)

S&F 110mm bore PVC(SWR) pipe single socketed in any length rubber ring joints complete all as specified and as directed.

S&F 110mm bore PVC(SWR) pipe bend any radius complete all as specified and as directed.

Supply and fixing 110 mm dia PVC (SWR) junction single, (singleT), equal or unequal fixed to wall upto any height of the building complete all as specified and as directed.

S&F 75mm bore PVC(SWR) pipe single socketed in any length rubber ring joints complete all as specified and as directed.

S&F 75 mm bore PVC(SWR) pipe bend any radius complete all as specified and as directed.

Supply and fixing 75 mm dia PVC (SWR) junction single, (single T), equal or unequal fixed to wall upto any height of the building complete all as specified and as directed.

Taking down cement plaster including raking out joints, hacking for key, scrubbing down with water etc complete.

Demolition of Brickwork quoins,arches,pillars etc but excluding ashlar facings,dressed all store work and precast concrete articles built in cement mortar.

M&L for brick work with sub class 'B' bricks built in cement mortar 1:6 straight or curved on plan exceeding 6 mtr mean radius and all as directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan or to any radius in half brick work built in CM (1:4) Complete all as specified and as directed.

M&L for rendering 15mm thick in CM (1:6) on other than fair face of brick work or concrete surfaces and finished the surface even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 15 mm thick, set in cement mortatr (1:4), as on brick/concrete surface etc finish even and smooth without using extra cement complete all as directed.

M&L for Rendering 10mm thick with CM (1:3) on or concrete surfaces and finished the surface even and smooth as in ceiling complete all as specified and as directed.

M&L for preparation of new plastered surface and applying two coats of oil emulsion distemper over a coat of primer complete all as specified and as directed.

M&L for preparation on new plastered surfaces of wall and applying two coats of cement base paint over a coat of primer upto four storey high bldg complete all as specified and directed.

M&L for preparation of new plastered surface of ceiling and applying two coat of white wash on new surface etc, complete all as specified and as directed.

Taking up or down 15mm steel tubing and connections, including cleaning for re-fixing or removal.

Taking up or down 20mm steel tubing and connections, including cleaning for re-fixing or removal.

Taking up or down 25mm steel tubing and connections, including cleaning for re-fixing or removal.

M&L for cutting chases, pinning, in making good to facing where required of of brick wall and pointing in cement motrar 1:3 to ends and cutting chases for concealed water tubing and concealed conduit wiring ete and making good surfaces

S&F 15mm bore steel tubing medium grade galvanised with all fittings fixed complete to wall and ceiling complete all as specified and directed.

S&F 20mm bore steel tubing medium grade galvanised with all fittings fixed complete to wall and ceiling complete all as specified and directed.

S&F 25mm bore steel tubing medium grade galvanised with all fittings fixed complete to wall and ceiling complete all as specified and directed.

Supplying and laying for 20 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/walls including all brass fitting/fixtures in any grade to receive plumbing fittings and fixtures complete all as specified and directed

Supplying and laying for 25 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/walls including all brass fitting/fixtures in any grade to receive plumbing fittings and fixtures complete all as specified and directed

Supplying and laying for 32 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/walls including all brass fitting/fixtures in any grade to receive plumbing fittings and fixtures complete all as specified and directed

S&F in repair 20mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipes complete all as specified and as directed.

S&F in repair 25mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipes complete all as specified and as directed.

S&F in repair 15mm bore Brass CP bibcock fancy type long body with crutch or butterfly handle complete all as specified and as directed.

S&F in repair 15mm bore Brass CP stopcock concealed type fancy type,with crutch or butterfly handle complete all as specified and as directed.

S&F in repair 15mm bore Brass CP angular stopcock type with crutch or butterfly handle complete all as specified and as directed .

S&F in repair PVC connection 15 mm size pipe with PTMT nut of Length 600mm complete all as specified and as directed.

S&F in repair brass CP shower roses with or without swivel joints,with shower arm, 125mm size, including fixing to steel pipes or union complete all as specified and as directed.

S&F in repairs Vitreous China wash basin ( white), flat back, size 580 x 450 mm, excluding taps, waste,chain and plug and porcelain stopper but including brackets, complete all as specified and as directed.

S&F in repair 15 mm bore fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

S&F in repair 32mm dia flexible PVC waste pipe for basin etc complete all as specified and as directed.

S&F in repair 32 mm bore waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed.

S&F in repair vitreous china squatting pan of orissa pattern long pan of size 580 mm x 440mm with integral foot rest white with cast iron p or s trap with back inlet including flush pipe of suitable length to connection with existing cistern & make good complete all as specified and as directed.

S&F in repairs 10 litres capacity PVC valveless, syphonic action type, flushing cistern, white colour, low level, white with inlet, ball valve, float and handle including brackets duly painted, 32mm dia PVC flush pipe complete all as specified and as directed.

S&F in repair CI Nahani trap of 100mm dia, including jointing to waste pipe fixed in cement concrete, (1:2:4) type B1 (using 20 mm graded crushed stone aggregate)complete all as specified and as directed.

S&F in repairs CP grating of 100mm dia, fixed with cement mortar (1:3).complete all as specified and as directed.

Supply & fixing only as in replacement wash down water closet (pedestal pattern) including connection to drain (or outgoing pipe) and to flush pipe etc. and making good the damaged surfaces complete all as specified and as directed.

S&F in repair PVC white water closet seat cover heavy duty coloured pattern with flat bottom and cover and mild steel CP hinnging device complete.

S&F in repair CP health faucet with one meter flexible tube with wall hook complete.

S&F in repair wall mixture non telephonic brass CP tap for mixing hot and cold water including three joints to 15 mm bore pipes or union and pluging and screwing to wall complete.

S&F in repair wash hand basin mixture Brass CP tap for mixing hot and cold water including three joints to 15 mm bore pipes or union and pluging and screwing to wall complete.

S&F in repair 15mm bore brass spindle pluging and screwing to fittings complete.

S&F in repair CP knob head pluging and screwing to fittings complete.

S&F in repair 15mm bore GI short piece pluging and screwing to fittings complete.

S&F in repair 20mm bore GI short piece pluging and screwing to fittings complete.

S&F in repair ball valve including nessesary fittings fixed to existing flushing cistern complete all as specified and as directed.

S&F in repairs towel rail of brass chromium plated tube 19 to 20 mm dia 600 mm long `D' type complete with brass chromium plated screw complete all as specified and directed.

S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. Make:- Prayag or equivalent make approved by GE.

S&F in repair Corner glass shelf assembly consisting of 5.5mm thick sheet glass shelf with chromium plated bracket guard and railing complete all as specified and directed. Make:- Prayag or equivalent make approved by GE.

S&F in repair brass CP toilet paper holder to wall with chromium plated brass screws complete all as specified and as directed.

S&F in repairs 1mm thick of stainless steel kitchen plate rack of size 750mm x 900mm including all fixing arrangement complete all as specified and as directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm and including 32mm waste coupling of PTMT (half or full threaded) Minimum weight 32mm-45gms/40mm-60 gms).

Material and labour for 16-18mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. complete all as specified and directed.

S&F in repaire Premium one piece ceramic western floor mounted one piece water closet western commode with soft closed seat cover for Lavatory in built flushing cistern, toilet including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe etc incl P or S trap.

Easing of existing door shutters for easy closing/ opening tightening of hinges or changing the position of hinges adjustment of tower bolts, sliding bolts with new screws etc complete all as specified and directed.

S&F framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled incl 1 mm thick mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing complete.

Framed work such as grills, grating doors or gates etc. of angle iron, flat iron with ends of bars shouldered and or rivetted or forged into spikes framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings for terrace, framework of water tanks and similar work confirming to Fe 290.

Material and labour for preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

S&F powder coated aluminium ventilator louvre type with frame, aluminium section weighing 0.55 Kg/M including 4mm thick glass/ss wire mesh necessary joining cleats, glazing clips, rubber packing, side handles fixed to wall with fastener etc., complete all as specified and as directed

Supply and fixing in repair powder coated aluminum window/ventilator (single leaf single shutter) side hung type with stainless steel butt hinges, one shutter glazed with and including 4.00mm thick plain sheet glass and other shutter with stainless steel wire cloth of 0.36 mm dia of wire and average width of aperture 1.40mm fixed with stainless steel wire staples, rubber gasket, stopper, aluminium grills of 70mm aperture, aluminium anodised handle 100mm long ,aluminium anodised tower bolts 100mm long and peg stay etc, size of aluminum frame shall be 100mmx50mmx1.55mm and shutter frame shall be 40mmx20mmx1.55mm after and including dismantling of old aluminium ventilator complete all as specified and as directed. upto 12 storied bldg Note : 1 No Glazed shutter 1 No Gauged shutter and aluminium grill shall constitube one unit.

S&F Powder coated aluminium sliding windows for three track with rubber gasket, stopper powder coated aluminium standard beads/glazing clips ,locking arrangement etc and aluminium frame of size 80mmX25mmX1.55mm and shutter of section 20mm X20mm X1.55mm incl ( two shutter of 4.8mm thick glass and one shutter of wiremesh 0.36 mm dia of wire and average width of aperture 1.40 mm) including with necessary all fittings and including taking down of old steel windows etc complete all as per manufacturer's instructions and all as specified and as directed.

Repairing of Aluminium door shutters fixed /side hang/sliding type with necessary jointing cleats,glazing clips, rubber neoprene packing , anodised aluminium snap beading , screws, etc and locking arrangement , complete all as specified and as directed.

Repairing of Aluminium Window shutters fixed /side hang/sliding type with necessary jointing cleats,glazing clips, rubber neoprene packing , anodised aluminium snap beading , screws, etc and locking arrangement , complete all as specified and as directed.

M&L for double action floor spring hydraulically regulated made up of minium 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all as per manufacturer's instruction, complete all as specified and directed.

Supply and fixing as in repair mortice lock set combipack with 6 lever and with decor brass handle set complete all as specified and as directed. Make : Godrej Cat No 8286 or equivalent make approved by GE.

Resecuring or easening, adjusting without taking down of shutters exc 1 Sqm and n.exc 2 Sqm each in situ.

Supply and fixing for stay/ handle cleat as per requirement at site and welded complete for fixing of handle /stay in steel windows including taking down old one complete all as specified and as directed.

Supply and fix in repairs 15 mm dia bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed .(Minimum weight 15mm-90gms/20mm-125gms)

Supply and fix in repairs 15 mm dia pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-110gms)

Supply and fix in repairs 15 mm dia stop valve of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms/20mm-112gms)

Supply and fix in repairs 15 mm dia angle valve of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms/20mm-112gms)

Taking down chowkhat or frames with shutter not exc. 1.5 Sqm each (without taking of shutters from the frames) complete all as specified and as directed. Upto 12 storied bldg.

S&F Magic eyes for wooden door including all fitting all as specified and as directed at site.

S&F solid PVC door frame of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube in opening all as shown on drawing and specified upto 12 storied bldg .

S&F factory made solid panel PVC door shutter 30 mm thick style consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheets strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail and bottom rail on either side and as gap inside for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/seated to the stiles and rail with suitable PVC sheet bending and jointed together with solvent cement supplying and fixing in the frame at site as per specification and drawing. Upto 12 storied bldg.

Supply and fixing for solid PVC door frame of size 50 mm x 47 mm made out of 5 mm single side prelam PVC sheet used instead of plain colour PVC sheet & edges will be painted to match,reinforced with MS Sq tube in opening all as shown on drawing upto 12 storied bldg and specified and as directed.

S&F for factory made solid PVC Moulded door shutter 28 to 30 mm thick(stiles) with 2 mm thick prelaminated Moulded PVC sheet polyurethane painted on the front face & 2 mm plain colour PVC sheet on back faces,and with particle board core supplying and fixing in frame at site as per specification and drawing upto 12 storied bldg complete all as specified and as directed.

Supply and fixing for 100mm size stainless steel butt hinges medium weight, cold rolled complete all as specified and as directed.

Supply and fixing for 150mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed.

S&F for 100mm long Aluminium,anodised extruded handle fabricated type, complete all as specified and as directed.

Supply and fixing in repair for 18/19mm thick prelaminated particle board interior grade, prelaminated one side with decorative choice laminations and other side balancing white lamination fixed with screws to timber frame work as in kitchen cabinet shutter including external teak wood lipping 6mm thick fixed with nails upto 12 storied bldg complete all as specified and as directed.

Supply and fixing in repair for 18/19mm thick block boards, grade 2 quality,interior grade, decorative type with decorative face veneer on both face fixed with screws to timber frame work as in cupboard shutter including external teak wood lipping 6mm thick fixed with nailscomplete all as specified and as directed.

Supply and fixing in repair for 0.9mm thickess of decorative laminated type 1 of surfaces finish,colour and pattern as approved fixed with approved adhesive as per manufacture,s instruction complete all as specified and as directed.

Supply and fixing for 30mm width of flap continious piano hinges mild steel,bright finish or electro galvanised complete all as specified and as directed.

S&F in magnetic catches 50 mm long of any description

Supply and fixing for 40mm dia cupboard knobs of brass fixed with nut, screw and washer complete all as specified and as directed.

Supply and fixing for 75mm Hasp and staple, safety type brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed.

S&F in repair 6mm thick plywood in cupboards complete all as specified.upto 12 storied bldg.

S&F in repair for 2nd class hard wood plain fillet of size exc 13 & n.exc 25 Sq cm, rectangular or square in section, clean sawn, secured with nails or beads complete all as specified and as directed. upto 12 storied bldg.

Supply and fix in repairs 0.56 mm thick Plain, Aluminium sheeting, Alloy 31000 H4 drip and straight flashing complete all as specified and as directed.

Taking down copper/aluminium point wiring (light,fan,socket etc.) complete including fittings such as switch, ceiling rose, light fittings, regulators etc. and making good to the disturbed surface of walls, floors etc. all complete as specified and directed.

M&L as in repair / replacement for point wiring for one light/ bell/ fan controlled by one number one way switch complete with 1100 V grade FRLSH PVC insulated multistranded copper conductor cable conforming to IS : 694 of size 1.5 Sqmm two runs single core for phase and neutral drawn through and including PVC concealed conduit pipe of suitable size minimum 20mm dia medium grade ISI Marked complete with one run of 1100 V grade FRLSH PVC insulated multistranded copper conductor cable 1.5 Sq mm single core green colour for earth continuity conductor and connecting to common earth dolly incl provn of MS sheet pressed sunken box not less than 1.12 mm thick concealed on wall, with 3 mm thick laminated sheet top cover ISI marked (Make: Hylum/ Anchor/ Orient) for fixing of switches/ socket/ regulator with screws complete including making good of disturbed surfaces of wall/ceiling/floor in same specification as per existing surrounding surface complete all as specified and directed. Note : Proper colour code of wiring to be maintained.

All as per item No. 117 here in before but for 5 Amps Socket on same board complete all as specified and directed.

All as per item No. 117 here in before but for 05 A socket on independent board complete all as specified and directed.

All as per item No. 117 here in before but for 15 A independent socket with 2.5 sqmm copper conductor complete all as specified and directed.

All as per item No. 117 here in before but for one light/fan/bell in PVC casing caping complete all as specified and directed.

All as per item No. 117 here in before but for 5 Amps Socket on same board in PVC casing caping complete all as specified and directed.

All as per item No. 117 here in before but for 5 Amps Socket on independent board in PVC casing caping complete all as specified and directed.

All as per item No. 117 here in before but for 15 A independent socket with 2.5 sqmm copper conductor in PVC casing caping complete all as specified and directed.

M&L for point wiring for one light/ bell/ fan controlled by one number one way switch for 5Amps SSC complete with 1100V grade FRLSH PVC insulated unsheathed multistranded copper conductor cable conforming to IS : 694 of size 1.5 Sqmm two runs single core for phase and neutral drawn through in and including PVC concealed conduit of suitable size (minimum 20mm dia medium grade ISI Marked) complete with one run of 1100V grade FRLSH PVC insulated multistranded copper conductor cable 1.5 Sq mm single core green colour for earth continuity conductor and connecting to common earth dolly incl provn of modular type galvanized MS sheet pressed sunken box not less than 1.00 mm thick concealed on wall including fixing of modular cover plate of suitable modules with fixing screws, for fixing of modular type switches / socke t/ Fan regulator etc. complete including making good of disturbed surfaces of wall/ceiling/floor in same specification as per existing surrounding surface complete all as specified and directed. Note : Proper colour code of wiring to be maintained.

All as per item No. 125 here in before but for 5 Amps Socket on same board complete all as specified and directed.

All as per item No. 125 here in before but for 5 A socket point on independent board complete all as specified and directed.

All as per item No. 125 here in before but for 15 A socket point independent with 2.5 sqmm 1100V grade FRLSH PVC insulated copper conductor complete all as specified and directed.

M&L for replacement of point wiring for one light controlled by two number two way switch complete with 1100 V grade FRLSH PVC insulated unsheathed multistranded single core copper conductor cable conforming to IS : 694 of size 1.5 Sqmm with two runs of for phase and neutral drawn through and including PVC concealed conduit pipe of suitable size minimum 20mm dia medium grade ISI Marked complete with one run of 1100 V grade FRLSH PVC insulated multistranded copper conductor cable 1.5 Sq mm single core green colour for earth continuity conductor and connecting to common earth dolly incl provn of MS sheet pressed sunken box not less than 1.12 mm thick concealed on wall, with 3 mm thick laminated sheet top cover ISI marked (Make: Hylam/ Anchor/Orient) for fixing of switches/socket/regulator with screws complete including making good of disturbed surfaces of wall/ceiling/floor in same specification as per existing surrounding surface complete all as specified and directed. Note : Proper colour code of wiring to be maintained.

M&L for replacement of point wiring for one light controlled by two number two way switch complete with 1100 V grade PVC insulated unsheathed multistranded single core copper conductor cable conforming to IS : 694 of size 1.5 Sqmm with two runs for phase and neutral drawn through in and including PVC casing caping of suitable size minimum 20 mm dia medium grade ISI Marked complete with one run of 1100 v grade PVC insulated copper conductor cable 1.5 Sq mm single core green colour for earth continuity conductor and connecting to common earth dolly incl colour coding of cable shall be for phase, neutral and earth wire as specified in MES SSR Part I 1991 with provn of sunken MS sheet pressed terminal boxes made of 1.12mm thick M.S. Sheet, prepainted concealed on wall, with 3 mm thick laminated sheet top cover ISI marked (Make: Hylam/Anchor/Oreint) for fixing of switches/socket/regulator with screws complete all as specified and directed.

Dismantling and taking down carefully sub-main wiring any size including wooden batten etc and making good the disturbed surfaces of wall/ floor to match the existing wall/ floor etc complete all as specified & directed.

Material and labour for circuit/sub-main wiring concealed with two run of 1100 V grade FRLSH PVC insulated & unsheathed 1.5 Sqmm single core multi stranded copper conductor cable alongwith one run of 1.5 Sqmm 1100 V grade FRLSH PVC insulated & unsheathed single core multi stranded copper conductor cable green for earth continuity conductor connected to common earth dolly, drawn through concealed PVC conduit complete all as specified and as directed. Note : (i) Three runs of 1.5 Sqmm cable shall measured as one length.

Material and labour for circuit/sub-main wiring (surface type) with two run of 1100 V grade PVC insulated & unsheathed 4.0 Sqmm single core multi stranded copper conductor cable alongwith one run of 4.0 Sqmm 1100 V grade FRLSH PVC insulated & unsheathed single core multi stranded copper conductor cable for earth continuity conductor connected to common earth dolly, drawn through PVC casing caping complete all as specified and as directed. Note : (i) Three runs of 4.0 Sqmm cable shall measured as one length.

Material and labour for circuit/sub-main wiring with two run of 1100 V grade PVC insulated & unsheathed 4.0 Sqmm single core multi stranded copper conductor cable alongwith one run of 4.0 Sqmm 1100 V grade FRLSH PVC insulated & unsheathed single core multi stranded copper conductor cable for earth continuity conductor connected to common earth dolly, drawn through concealed PVC conduit complete all as specified and as directed. Note : (i) Three runs of 4.0 Sqmm cable shall measured as one length.

Material and labour for of sub-main wiring with two run of 1100 V grade FRLSH PVC insulated & unsheathed 6.0 Sqmm single core multi stranded copper conductor cable alongwith one run of 6.0 Sqmm 1100 V grade PVC insulated & unsheathed single core multi stranded copper conductor cable for earth continuity conductor connected to common earth dolly, drawn through concealed PVC conduit complete all as specified and as directed. Note : (i) Three runs of 6.0 Sqmm cable shall be measured as one length.

All as per item No. 135 here in before but with 10 sqmm PVC insulated copper conductor complete all as specified and as directed. Note : (i) Three runs of 10 Sqmm cable shall measured as one length.

Material and labour in for replacement of three phase sub-main wiring (Surface type) with Four (R,Y,B, N) run of 1100 V grade PVC insulated & unsheathed 6.0 Sqmm single core multi stranded copper conductor cable alongwith one run of 6.0 Sqmm 1100 V grade PVC insulated & unsheathed single core multi stranded copper conductor cable for earth continuity conductor connected to common earth dolly, drawn through PVC conduit complete all as specified and as directed . Note : (i) Five runs of 6.0 Sqmm cable shall be measured as one length.

Material and labour in for replacement of three phase sub-main wiring (surface type) with Four (R,Y,B, N) run of PVC insulated & unsheathed 10.0 Sqmm single core multi stranded copper conductor cable (FRLSH), 1100 Volt grade alongwith one run of 10.0 Sqmm PVC insulated & unsheathed single core multi stranded copper conductor cable (FRLSH), 1100 Volt grade for earth continuity conductor connected to common earth dolly, drawn through PVC conduit complete all as specified and as directed. Note : (i) Five runs of 10.0 Sqmm cable shall be measured as one length.

S & F Ceiling rose, 3 terminal, PVC/ polycarbonate isolated body, 230 V.

S & F Piano switch flush type single pole one way 5 Amps, 230 V.

S & F Piano switch flush type single pole two way 5 Amps, 230 V.

S & F Switch Socket combination flush type, 2 in 1 multipurpose, 3 Pin, 5 Amps and 15 Amps

S & F Socket outlet 2 in 1, 3 pin, 6 and 16 amp flush type

S & F Switch Socket combination flush type 2 in 1, 5 Pin, 5 Amp. .

S&F Socket outlet 2 in 1, 3 pin, 6A

S & F Switch piano flush type, single pole one way 15 Amps, 230 V.

S & F Call bell musical door chrome AC 230 volts single pole (Ding dong Type)

S & F Batten holder PVC / Poly carbonate with back plate suitable for 230V AC

S & F Electronic Ceiling fan regulator (2 Module stepped type) flush type suitable for 230 V AC.

S & F Box type SSC 5 pin 5 Amp

S & F Box type SSC 6 pin 5/15 Amp

S & F Modular type switch, one way 6 Amps, 1 module complete. Make:-Legrand/Anchor(Roma)/Crabtree

S & F modular type socket 5 pin, 6 Amps 2 module complete. Make:-Legrand/Anchor(Roma)/Crabtree

S & F Modular type socket 5 pin, 16 Amps 2 module complete. Make:-Legrand/Anchor(Roma)/Crabtree

S & F Modular type switch, one way 16 Amps, 1 module complete. Make:-Legrand/Anchor(Roma)/Crabtree

S & F Modular type fan regulator step type(2 module)120 Watt. Make:-Legrand/Anchor(Roma)/Crabtree

S & F Modular type5 Aamp bell push switch. Make :- Legrand/Havells/Crabtree/Anchor

M&L modular cloured/white cover plate with frame 2 module including taking down of old one complete all as specified and directed. Make:-Legrand/Anchor(Roma)/Crabtree

M&L modular cloured/white cover plate with frame 3 module including taking down of old one complete all as specified and directed. Make:-Legrand/Anchor(Roma)/Crabtree

M&L modular cloured/white cover plate with frame 4 module including taking down of old one complete all as specified and directed. Make:-Legrand/Anchor(Roma)/Crabtree

M&L modular cloured/white cover plate with frame 6 module including taking down of old one complete all as specified and directed. Make:-Legrand/Anchor(Roma)/Crabtree

M&L modular white Cloured/cover plate with frame 8 module including taking down of old one complete all as specified and directed. Make:-Legrand/Anchor(Roma)/Crabtree

M&L modular white cloured/cover plate with frame 12 module including taking down of old one complete all as specified and directed. Make:-Legrand/Anchor(Roma)/Crabtree

M&L modular white cloured/cover plate with frame 16module including taking down of old one complete all as specified and directed. Make:-Legrand/Anchor(Roma)/Crabtree

M&L modular metal flush box 1/ 2 module including taking down of old one complete all as specified and directd. Make:-Legrand/Anchor(Roma)/Crabtree

M&L modular metal flush box 3 module including taking down of old onecomplete all as specified and directd. Make:-Legrand/Anchor(Roma)/Crabtree

M&L modular metal flush box 4 module including taking down of old onecomplete all as specified and directd. Make:-Legrand/Anchor(Roma)/Crabtree

M&L modular metal flush box 6 module including taking down of old onecomplete all as specified and directed. Make:-Legrand/Havells/Crabtree/Anchor

S & F modular Metal flush box 8 module complete all as specified and as directed. Make:-Legrand/Anchor(Roma)/Crabtree

S & F modular Metal flush box 12 module complete all as specified and as directed. Make:-Legrand/Anchor(Roma)/Crabtree

S & F modular Metal flush box 16 module complete all as specified and as directed. Make:-Legrand/Anchor(Roma)/Crabtree

Supply and fixing MCB 06 Amps to 32 Amps, single pole, 240 Volt "C" series, breaking capacity 10 KA complete all as specified and as directed. Make : ABB /Legrand/ Havells/L&T/Schineider.

Supply and fixing MCB 06 Amps to 32 Amps, SPN, 240 Volt "C" series, breaking capacity 10 KA complete all as specified and as directed. Make : C&S /Legrand/ Havells/L&T.

Supply and fixing MCB TP 25 To 63 AMP 415 Volt "C" series, breaking capacity 10 KA complete all as specified and as directed. Make : ABB /Legrand/ Havells/L&T/Schineider.

Supply and fixing MCB TPN 40 To 100 AMP 415 Volt "C" series, breaking capacity 10 KA complete all as specified and as directed by the Engr-in-Charge. Make : ABB /Legrand/ Havells/L&T/Schineider.

S&F as MCCB, thermal and magnetic release adjustable type, 4 pole, 125 Amps with breaking capacity 25 KA, 415 volts complete all as specified and directed. Make : ABB /Legrand/ Havells/L&T/Schineider.

All as per item 176 here in before but capacity 160 Amps. Make : ABB /Legrand/ Havells/L&T/Schineider.

Supply and fix as in repair SPN MCB DB 8 way with Amps rated copper bus bar, neutral link, suitable for mounting MCB's 240 volts double door type including taking down old one and making good the disturbed surface complete all as specified and as directed. Make : ABB /Legrand/ Havells/L&T/Schineider.

Supply and fix SPN MCB DB 4 way with 200 Amps rated bus bar, neutral link, dinrail suitable for mounting MCB's 240 volts double door type as in repair of Busbar for distribution of power and light circuit including taking down old bus bar box and making good the disturbed surface complete all as specified and as directed. Make : ABB /Legrand/ Havells/L&T/Schineider.

M&L for Sheet metal enclosure MCB DB double door Triple pole & neutral 4 way with fully insulated 200 Amp bus bar for each phase, with 2 neutral bar, 2 earth bar and cable ties including taking down of old one complete all as specified and directed. Make : Legrand/Havells/C&S/L&T Note:- MCB's are measured and paid in separate items.

S & F modular type 32 A Motor starters (for AC) white clour. Make:- crabtree/Havells/Legrand/North west/Anchor (ROMA)

S&F LED tube light fitting 4 ft 20 watt, 230 volt energy efficient comprises of extruded PVC housing, with inbuilt driver and PC diffuser including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. Make:- Havells (Cat No- LUMILINEBS20W LED8 30S PCWH)/ Bajaj (Cat No- BSLSB20WWH)/ Crompton (Cat No – CCS-103-20-65-SL-DP-NWH)

All as per item No 182 here in before but LED tube light of 2 ft and 1 x 10 Watt LED lamp complete all as specified and as directed. Make:- Havells (Cat No-LUMILINEBS10WLED865 SPCWH)/ Baja (Cat No- BSLSB10WWH)/ Crompton (Cat No- CCS-103-10-65-SL-DP-NWH)

Taking down ceiling fan of any type, any make and any sweep for repairing, opening the body and blade, hecking for repalcement of unserviceable spares,cleaning, overoiling, greasing, replacement of unserviceable spare by new one, re-assembling of all components in original position, testing and hanging up the same complete all as specified and as directed. Note : New spare parts required for replacement shall be measured and paid seperately.

Supply only MS split pin size 2 " x 1/8 " for ceiling fan of 1200/1400mm Sweep complete all as specified and as directed.

Supply only Hanging bolt with nut of size 3/8" x 3 1/2 " for ceiling fan of 1200/1400mm Sweepcomplete all as specified and as directed.

Supply only Rubber bush of size 1 1/2 " dia x 1" thick for ceiling fan of 1200/1400mm Sweep complete all as specified and as directed.

Supply only Ball bearing of size 6201/6202/6203 for ceiling fan of 1200/1400mm Sweep complete all as specified and as directed. Make : TATA/SKF/NBC

Supply only Metal bush bearing for ceiling fan of 1200/1400mm Sweep complete all as specified and as directed. Make : TATA/SKF/NBC

Taking down exhaust fan of any type, any make and any sweep for repairing, opening the body including blade, checking for repalcement of unserviceable spares,cleaning, oiling, greasing including replacement of unserviceable spare by new one, painting, re-assembling of all components in original position, testing and hanging up the same complete all as specified and as directed. Note : New spare parts required for replacement shall be measured and paid seperately as 'Supply only"

Supply only Ball bearing 2001/ 2002/ 2003 for exhaust fans complete all as specified and as directed. Make : TATA/SKF/NBC

Supply only Metal bush bearing for exhaust fans complete all as specified and as directed. Make : TATA/SKF/NBC

Supply and fixing as in repair 2.5 mfd capacitor complete all as specified and as directed. Make:- Universal/Tibcon/Elcap

Material and labour for painting of ceiling fan of size 1200/1400mm sweep with down rod upto 2.00 mtr long with two coats of synthetic enamel white paint including preparation old painted surface including writing of MES No with letters n exc 15cm height complete all as specified and as directed.

Supply and fixing as in repair for MS clamps made out of 50x6mm flat iron suitable for hanging of ceiling fan on pipe including necessary cutting, threading, drilling fixing arrangement split pin, nuts bolts washer etc complete all as specified and as directed.

S& F ceiling fans complete with blades, down rods and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM and all as directed. Make:- Cropton (Model No-WINZER) /Havels (Model No- Super speed ES) ORIENT ( Model No-Rapid Air)

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers. Make:- Crompton (Model No-Drift Air Plus)/Havells (Model No-ventil air DB Green)/Orient (Model No-Spring Air)

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm Make- Havells( Cat No-FHVTADXWHT10)/Crompton (Model No-250mm BRISK AIR NEO)/Orient(Model No-power flow)

Supply and fixing as in repair M.S. galvanised louvers suitable for exhust fan of size 300/230mm sweep complete all as specified and as directed.

Taking down geyser and scraping, cleaning including brazing of inner vessel of the geyser at leakage point to made it leak proof including testing pressure and assembling of all component refixing complete for 25/15 Ltr capacity complete all as specified and as directed.

Supply and fixing as in replacement for heating elements of 2 KW 230 V suitable for water heater of any type including connection with suitable cable complete all as specified and as directed.

Supply and fixing as in replacement suitable for five star rating, special heating elements of 2 KW 230 V suitable for water heater of any type including connection with suitable cable complete all as specified and as directed.

Supply and fixing as in replacement for thermostat switch of geyser 230 V, 30 degree to 90 degree centigrade temp range to be set at 70 degree to 50 degree centi grade suitable for water heater complete all as specified and as directed. Make:-Venus/Bajaj/Theeta

Supply and fixing as in replacement for bottom cover, made out of MS sheet 16 guage, duly paintedwith two coats of white synthetic enamel paint both side over a coat of red oxide zinc chrome primer for 25/15 Ltr capacity geyser complete all as specified and as directed.

Supply and fixing as in replacement for top cover made out of MS sheet 16 guage, duly painted with two coats of white synthetic enamel paint both side over a coat of red oxide zinc chrome primer of 25/15 Ltr capacity geyser complete all as specified and as directed.

Supply and fixing as in rreplacement for MS flange for Geyser of 25/15 ltr capcity complete all as specified and as directed.

Supply and fixing as in replacement for Split cover made out of 16 guage sheet duly painted with synthetic enamel paint suitable for water heater of 25/15 ltr capacity complete all as specified and as directed.

Supply and fixing as in replacement for indicating lamp, 230 V, flush type, rectangular, red indicator suitalbe for water heaters complete all as specified and as directed.

Supply and fixing as in replacement for 450mm long brass CP braided hoses for hot water with 2 nuts without nipple suitable for geysers complete all as specified and as directed.

Supply and fixing as in replacement for PVC inlet connector pipe 450mm long long for geyser, heavy duty, with brass coupling both ends to fix inlet of geyser complete all as specified and as directed. Make:- Prayag/Polytuf or equivalent make as approved by GE

Supply and fixing as in replacement for apparatus plate , asembly suitable for water storage heater of 25/15 ltrs capacity complete all as specified and as directed.

Supply and fixing Copper inner tank of 25/15 Ltr capacity geyser of heavy guage to withstand pressure upto 8 bars including testing pressure and taking down of old unserviceable one complete all as specified and as directed

Supply and fixing as in replacement for PVC insulated flexible copper conductor cable 2.5 Sqmm 3 core , 1100 Volts grade conforming to IS 694 (FRLSH) complete all as specified and as directed.

Supply and fixing as in replacement split type bolt MS 12mm dia, 10cm long grouted with cement mortar suitable for fixing new geyser including making good to distrubed surface complete all as specified and as directed.

Material and labour preparation to old painted surface of storage water heater of 25/15 ltr capacity and painting with two coats of synthetic enamel paint (white) by using spray gun complete all as specified and as directed.

Supply and fixing as in replacement for 16 amp, 3 pin plug top complete all as specified and as directed.

Supply and fixing as in replacement for piano switch,16/ 20 Amp, flush type, one way complete all as specified and as directed.

Supply and fixing as in replacement for socket 16 Amp, 3 pin, flush type complete all as specified and as directed.

Supply and fixing as in replacement for angle stop valve, brass chronium plated, 15mm bore screwed down high pressure with crutch or butter fly handle screwed both ends fixed to GI pipe complete all as specified and as directed.

Tirupati Buildcon Pvt. Ltd. (BID ID -3174031)

GOODWILL AND CO. (BID ID -3174146)

KWALITY CONSTRUCTION (BID ID -3173513)

GAYATRI ENTERPRISE (BID ID -3174554)

R.R.ENTERPRISE (BID ID -3174190)

NICE INFOTECH (BID ID -3172755)

THE PLANTERS ENGINEERING CORPORATION (BID ID -3174089)