Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹5.3 Laccepted-aoc | ₹5.3 L | accepted-aoc |
Tender Value
Refer Docs
EMD Value
₹18,500
Closing Date
25 May 2026, 9:30 pmClosed
Bangalore University
Jayappa.D.V
Proposed Renovation for Organic & Inorganic Labs in Chemistry Department
BU/2026-27/OW/WORK_INDENT61
BU/2026-27/OW/WORK_INDENT61
Open
Other Works
Electronic Documents, First(One Cover)
Registrar Office Bangalore University
₹500
₹18,500
25 May 2026
7 May 2026
22 May 2026
Proposed Renovation for Organic & Inorganic Labs in Chemistry Department JnanaBharthi Campus Bangalore University Bangalore
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking to the appropriate disposal area as per direction of Eng...
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming...
Providing and fixing 12 mm thick pre-laminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, wind...
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of...
Providing and fixing 50mm bright finished brass cup board or wardrobe knob of approved quality with necessary screws ---- All Rates are inclusive of all lead
Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete. (75 mm) ---- All Rates are inclusi...
Providing and fixing sliding arrangement in racks/ cupboards/cabinets shutter by with stainless steel rollers to run inside C or E aluminium channel section (The payment of C or E channel shall be mad...
Providing 15mm cement plaster with cement mortar 1:3,1 cement: 3 coarse sand,finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners ...
Providing and fixing P.V.C.waste pipe for sink or wash basin including P.V.C.waste fittings complete. Semi rigid pipe 40mm dia ---- All Rates are inclusive of all lead
Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete :75x47x1.80mm ---- All Rates are inclusive of all lead
Providing and fixing magnetic catcher of approved quality in cupboard /ward robe shutters, including fixing with necessary screws etc. complete ---- All Rates are inclusive of all lead
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes including cost of materials, labour, usage charges...
Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm ap...
Providing and fixing Chlorinated Polyvinyl Chloride(CPVC)pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamp...
Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side c...
Providing flooring with 25mm thick polished Cuddapah slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mi...
Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo...
Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 m...
Providing and fixing aluminium round shape handle of outer dia 100 mm with SS screws etc. complete as per direction of Engineer-in- charge:Polyester powder coated minimum thickness 50 micron aluminium...
Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. ---- All Rates are inclusive of all lead
Providing and fixing bright finished brass handles with screws etc. complete: Brass handles75 mm with plate 125x32 mm ---- All Rates are inclusive of all lead
Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Eng...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
KW1 form-inorganci chemistry.doc
Tender Document • 0.26 MB
TN TBC-Inorganic chemistry.doc
Instructions to Tenderers • 0.15 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .