REPAIRS / MAINT TO ROOF COVERING, CEILING, FALSE CEILING AND OTHER ALLIED WORKS TO CERTAIN MD / OTM ACCN AT CHH SAMBHAJINAGAR MIL STN UNDER GE (S) AHILYANAGAR

Taking down cement or cement lime plaster of any description on brick, block or stone walls or ceilings etc (at any height) incl raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for rendering 10mm thick on in CM 1:6 fair faces of brick/concrete sufaces surfaces of walls finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 15mm thick plaster in CM 1:4 (using water proofing liquid as per manufacturers instructions) on other than fair faces of brick work masonary surface or concrete surface finished even and fair without using extra cement complete all as specified and as directed.

M&L for rendering 5mm thick in cement mortar (1:3) on concrete surfaces as in ceiling finished the surface even and smooth without using extra cement complete all as specified and as directed.

M&L for brickwork with fly ash bricks (old size), straight or curved on plan, exc 6 m mean redius, built in cement mortar 1:6 with and including demolition of existing brick work built in cement or cement lime mortar of any description complete all as specified and as directed.

M&L for preparation of new plastered internal surfaces of wall and applying two coat of acrylic distemper of required shade and colour complete including one coat of primer as per manufacturers specifications in any colour complete all as specified and as directed.

M&L for cutting chases for pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, chajja (upto 2nd floor) etc. and making good, cutting exc 10 cm but not exc 20 cm girth in RCC chajjas, steps etc all as specified and as directed.

Removing the loose spalled concrete portions, cleaning thoroughly by making it free of dirt, rust etc. and applying one coat of DR. FIXIT Epoxy Zinc Primer to the reinforcement bars, applying 1 coat of bonding agent (DR. FIXIT Pidicrete MPB) mixed with cement (ratio 1:1) and finally levelling with DR. FIXIT Polymer Mortar PX etc complete all as specified and directed.

S&F chicken wire mesh having 10 mm aperture and 0.63 mm dia fixed to Ceiling/wall surfaces with nails and welded with reinforcement complete all as specified and as directed.

M&L for preparation of new plastered surfaces or previously untreated sufaces of walls and applying two coat of cement base paint over a coat of alkali resistant primer complete all as specified and as directed.