8747 REPAIR REPLACEMENT AND CLEANING OF MANHOLES SEWAGE LINE SEPTIC TANK SOAKAGE WELL AND CONNECTED MISC BR WORKS AT 15 JAT VBV DCA MAP PH-I DAD RESIDENTIAL COMPLEX ETC UNDER AGE BR I OF GE SOUTH PUNE

Amount

Scooping & taking out sludge, sullage and foreign materials from septic tank, soak wells of any description & depth including removing & re-fixing of accessories and appliances required for safe disposal of sludge, sullage and foreign materials either by carrying the same in covered van / trolley upto 5 Km or more distance and it should be disposed off at such place which is not determinate to public health, complete all as specified and directed. Note :- Net depth shall be measured for payment purpose after bailing out water and the cost of bailing out water shall be deemed to be included in unit quoted rates.

Excavation in trenches not exc 1.5m wide and n.exc 1.5m in depth for foundations, manholes etc and getting out in in soft / loose soil, complete all as specified and directed.

S&F of 150mm dia DWC (Double wall corrugated), class SN8 as in sewage pipes (Black or orange in colour) including with socketed ends with and all fittings & fixtures, water tight joints to prevent leakage, laid over sand cushioning and jointed complete with rubber rings joints including dismantling and taking out of old unserviceable RCC or SWG pipe etc. complete all as specified and directed by Engr-in-Charge.

S&F of 200mm dia DWC (Double wall corrugated), class SN8 as in sewage pipes (Black or orange in colour) including with socketed ends with and all fittings & fixtures, water tight joints to prevent leakage, laid over sand cushioning and jointed complete with rubber rings joints including dismantling and taking out of old unserviceable RCC or SWG pipe etc. complete all as specified and directed by Engr-in-Charge.

S&F of 250mm dia DWC (Double wall corrugated), class SN8 as in sewage pipes (Black or orange in colour) including with socketed ends with and all fittings & fixtures, water tight joints to prevent leakage, laid over sand cushioning and jointed complete with rubber rings joints including dismantling and taking out of old unserviceable RCC or SWG pipe etc. complete all as specified and directed by Engr-in-Charge.

S&F of 300mm dia DWC (Double wall corrugated), class SN8 as in sewage pipes (Black or orange in colour) including with socketed ends with and all fittings & fixtures, water tight joints to prevent leakage, laid over sand cushioning and jointed complete with rubber rings joints including dismantling and taking out of old unserviceable RCC or SWG pipe etc. complete all as specified and directed by Engr-in-Charge. Note for item nos. 3 to 6 :- (i). Sand cushioning shall be measured and paid separately. (ii). Laying of sewage line work is to carried out in running sewage water therefore, temporary diversion /plugged of existing sewage line & bailing out of sewage water is the responsibility of contractor and the cost for the same provisions shall be deemed to be included in unit quoted rates.

M&L for sand filling under in trenches or foundations including watering and consolidation, complete all as specified and directed.

Removal of old building material /concrete beyond the lead included in the rates, including loading, unloading and stacking at the destination to a distance not exc. 5.00 km complete all as specified and directed.

Taking down shutters of any description exc. 1.0 Sqm but n. exc. 2.00 Sqm each and re-securing or easing & adjusting and re-fixing in same door opening after completion of tiling work, including other connected carpentry work complete all as directed by Engr-in-charge

M&L for light shade vitrified ceramic tiles 8-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6 including dismantling of floor, hearth including screed bed and removal of debries & dismantled materials upto 5 Km or more distance complete all as specified and directed

Returning, filling in any type of soil, including spreading, levelling, watering and well ramming in layers n.exc 25cm thick, complete all as specified and directed.

Removing excavated materials (Soil) n. exc. 50m and depositing where directed at a level n. exc. 1.50m above the starting point, complete all as specified.

S&F in repairs PVC (SWR), 75mm dia outlet floor trap, plain with steel grating including jointing with solvent cement, fixed to cement concrete type B1 1:2:4, complete all as specified and directed.

S&F in repairs PVC (SWR) gully trap 125x110mm, setting and jointing to waste pipe with solvent cement, complete all as specified and directed.

Cleaning of manholes of any size and of any depth by taking out semi solid / solid sludge from manholes completely and dispossed off the same in covered vehicle upto 5 Km or more distance complete all as directed by Engr-in-charge.

M&L for cleaning of blockage of sewer lines of any type & any dia of sewer line (ie branch sewer line or main sewer line) by way of cleaning desludging foreign material as well as rodding of sewer line between succession manholes manually /mechanically or by pumping out sewage from blocked manhole including desludging where required and ordered by Engineer-in-Charge and keeping sewer line functional entering from floor trap, water closet, soil waste / vent pipe, gully trap up to final drop / outlet into septic tank, soakage well complete all as specified and directed by Engineer-in-charge.

Cleaning of sewage system by deploying 02 (TWO) safaiwala per day, on day to day basis including blocked WCs, blocked WHB outlet , bottle traps, nahani traps, floor traps, gully traps, soil/waste pipe running on external walls of building including junctions in running / flowing condition without any disturbance and removing all types of blockages of any description in any situation manually or mechanically and disposal off of the sludge / waste materials in covered vehicle upto 5 Km or more distance complete all as specified and directed by Engineer-in-charge. Note :- (i) Complaint shall be completed within 24 hours and major complaints within a week. (ii) If safaiwala not attended the complaint within the time frame as mentioned above, 50% of quoted rate shall be deducted from the contractor’s dues as a penalty. (iii) The contractor shall be responsible to maintain daily record of job completed by safaiwala deputed by him in the subject work and obtain the signature of I/C complaint cell / Engr-in-charge daily at 1700 hours on all working days. (iv) Attending 01 complaint and make it functional shall be measured as 01 Job.

M&L for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required for the following dia of pipe, complete all as specified and directed:- (a) 150mm bore

(b) 200 mm Bore

(c) 250 mm bore

Demolition of brick masonary, built in cement mortar including all quoins, arches, pillars etc., complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation filling / mass concrete, complete all as specified and directed.

M&L for brickwork with fly ash bricks, straight or curved on plan exc. 6m mean radius, built in cement mortar 1:6 complete all as specified and as directed.

M&L for brickwork with fly ash bricks, straight or curved on plan n. exc. 6m mean radius, built in cement mortar 1:4 complete all as specified and directed.

M&L for precast cement concrete block masonry with solid blocks exceeding 10 cm in width and setting in cement mortar 1:6 using PCC 1:3:6 type C-1 precast cement concrete blocks, including demolition of existing PCC block walling of any description including removal of debries & demolished materials complete all as specified and directed.

M&L PCC (1:2:4) type B-1 using 20 mm stone graded aggregate as in benching & copping to manholes, drain or chanels etc., including demolition of existing PCC n. exc. 15 cm thickness below or above ground level including removal of debries & demolished materials complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 using 40 mm graded crushed stone aggregate as in surface channels and drains including necessary form work etc including demolition of existing PCC n. exc. 15 cm thickness below or above ground level including removal of debries & demolished materials complete all as specified and directed

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds mitred / stopped end, complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar 1:4 on block walling / brick masonry work or concrete surfaces, surfaces to be finished even and smooth with using extra cement, complete all as specified and as directed.

S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall or laid under floors / in earth, including dismantling of old unserviceable pipe complete all as specified and directed. Note for item nos.28 & 29:- Quoted rates shall be deemed to be inclusive of necessary scaffolding / security measures as the work is to be carried out for elevated height upto 12 mtr height of building.

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall or laid under floors / in earth, including dismantling of old unserviceable pipe complete all as specified and directed.

Taking down or dismantling PVC (SWR) pipes for cleaning and refixing of old PVC pipes single socketed in any length with rubber ring joints fixed to walls or laid in floors of 110mm dia etc. complete all as specified and directed.

Taking down or dismantling PVC (SWR) pipes for cleaning and refixing of old PVC pipes single socketed in any length with rubber ring joints fixed to walls or laid in floors of 75mm dia etc. complete all as specified and directed.

S&F 110 mm bore PVC (SWR) bends, any radius, complete all as specified and directed.

S&F 75 mm bore PVC (SWR) bends, any radius, complete all as specified and directed.

S&F PVC (SWR) bends with oval access door of 110 mm bore, complete all as specified and directed.

S&F PVC (SWR) bends with oval access door of 75 mm bore, complete all as specified and directed.

S&F PVC SWR Branch piece single (Single Y) equal or unequal 110mm dia with door access, complete all as specified and directed.

S&F PVC SWR Branch piece single (Single Y) equal or unequal 75 mm dia with door access, complete all as specified and directed.

S&F in repairs stainless steel grating of 100mm in size suitablr for nahni trap / floor including jointing, complete all as specified and directed.

M&L for precast factory made manhole cover of medium duty, area of each cover exc. 0.60 Sqm but n.exc 0.75 Sqm, 100mm thick with SFRC concreting including groove and hook arrangement for lifting and placing in position and sides covered by MS sheet with necessary collars, complete all as specified and directed by Engr-in-charge.

M&L for precast factory made gully trap cover of medium duty, area of each cover n.exc 0.36 Sqm, 100mm thick with SFRC concreting including groove and hook arrangement for lifting and placing in position and sides covered by MS sheet with necessary collars, complete all as specified and directed by Engr-in-charge.

M&L for 75mm thick PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in sub base / flooring, well compacted, finish surfaces fair and even, including demolition of existing PCC of any type including removal of debries and demolished materials upto 5 Km or more distance complete all as specified and as directed.

M&L for coloured precast cement concrete interlocking tiles 60mm thick, M-35 grade of any shape and size, conforming to IS-15658-2006 glossy finish as in floor / pavement laid over and incluidng 50mm thick stone dust cushioning, laid dry to the profile over hard concrete sub base filling complete all as specified and directed by Engr-in-Charge

S&F in repairs vitreous china water closet pan (squatting pan) white including provn of concrete bedding as fixed in repairs. Orissa pattern size 580x440mm white with integral foot rests (excluding flushing system and flush pipe) complete all as specified and as directed.

M&L for coloured Ceramic tile 450x300x7 to 8mm thick as on vertical surfaces such as skirting dado set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick rendering in cement mortar 1:4 on stone / brick/ concrete masonry surfaces including triangular filleting in CM 1:4 on top edges, including dismantling of old existing unserviceable tiles of any description including backing coat and removal of debries & dismantled materials upto 5 Km or more distance complete all as specified and directed.

M&L for Non skid ceramic colored tiles 7 to 8mm thick, (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm as in floor etc. set and jointed in neat cement slurry & pointed in white or coloured cement to match laid over and including 15mm thick screed bed or bedding layer in CM 1:6 including dismantling of old existing unserviceable tiles of any description including screed bed and removal of debries & dismantled materials upto 5 Km or more distance complete all as specified and directed.

M&L for granite 18mm thick (of any type) work (table rubbed and polished) in steps ,pillar, window cill, shelf, cooking platform and like laid over and including 10mm thick rendering in cement mortar (1:4) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:4 including dismantling of old existing unserviceable stone slab / tiles of any description including screed bed and removal of debries & dismantled materials (Except stone slab) upto 5 Km or more distance complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, shelf cooking platform, and other similar situations, complete all as specifed and directed.

S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S & F machine cut cuddappa stone slab one side polished 40 to 50 mm thick as in shelf set and jointed in neat cement slurry and pointed in coloured cement to match, laid over and including 15mm screed bed in cement mortar (1:4) including dismantling of old existing unserviceable stone slab (Cuddappa) of any description including screed bed and removal of debries & dismantled materials (Except cuddappa stone slab) upto 5 Km or more distance complete all as specified and directed.

S&F stainless steel plate rack made of 1.00 mm thick sheet grade SS- 304, ISI Marked of standard size 30"x32"x8"/10" and of approved quality of finish complete all as specified and as directed.

S&F in repairs vitreous china wash basin white flat back, size 580x450 mm, including providing 32mm dia PVC waste pipe (Medium grade) and CP brass waste coupling with check nut & washers etc complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan, 'Pedestal' white or coloured, including fixing bolts etc including PVC seat cover white with flat bottom including MS, CP or aluminium anodised hinges devices etc complete all as specified and directed.

S&F in repairs 10 litres capacity PVC flushing cistern low level including ball valve inlet & outlet, PVC connection 15 mm dia with check nuts on both ends, PVC waste pipe 32 mm upto WC connection including provision of GI 15 mm dia overflow pipe upto floor level complete all as specified and as directed.

S&F in repairs 32mm bore PVC waste pipe suitable for waste water of sink or WHB, 90cm long etc. complete all as specified and directed

S&F in replacement rotational moulded polyethylene water storage tank 500 Litres capacity, double layered, ISI marked (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of old unserviceable water tanks and removing to store, including making all connections to inlet and outlet pipe lines, including providing of new tank nipples of suitable size, complete all as specified and directed by Engineer-in-Charge.

Supplying, fixing, jointing and testing of 15mm bore galvanised iron pipe, medium grade with all fitting such as bends, elbow, socket, reducer etc and fixed to wall, ceiling or laid in floor including taking up or down of old steel water tubing and connections including cleaning for refixing or remove from site, complete all as specified and directed.

Supplying, fixing, jointing and testing of 20mm bore galvanised iron pipe, medium grade with all fitting such as bends, elbow, socket, reducer etc and fixed to wall, ceiling or laid in floor including taking up or down of old steel water tubing and connections including cleaning for refixing or remove from site, complete all as specified and directed.

S&F in repairs 15mm bore ball brass valve, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed.

S&F in repairs 15mm dia CP brass mixer valve suitable for mixing of hot and cold water screwed down for iron pipe etc. complete all as specified and directed

S&F in replacement bib tap fancy type of cast copper alloys (Chromium plated) with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule and fixed for 15mm dia pipe bore complete all as specified and as directed.

S&F in repairs fancy type Bib tap 15mm size standard of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm, 105gm) complete all as specified and as directed.

S&F in repairs pillar taps, 15mm bore cast copper alloy, with capstan heads, chromium plated fancy type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

S&F in repairs shower rose fancy type, brass chromium plated, 125 mm dia, heavy duty pattern with swivel joints type screwed for 15mm bore including jointing to pipe or unions complete all as specified and as directed.

S&F in repairs of plastic water closet seat cover closed pattern with flat bottom ,and cover and mild steel chromium plated hinging device complete all as specified and as directed.

S & F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F in repairs 15mm bore Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F in repairs stop valve 15mm bore (concealed type) chromium plated cast copper alloy fancy type with long shank and cup screwed down high pressure with capstan head or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F in repairs PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

S&F in repair tubular towel rail brass chromium plated 20mm dia 600mm long fixed with brass screws complete all as specified and as directed.

S&F in repairs grating doom 125 mm dia with waste hole of PTMT (Minimum weight 40 gms) complete all as specified and as directed.

M&L for cleaning and removing all scales and dirt etc from tanks and from mouths of circulating pipes etc, capacity exceeding 250 litres and not exceeding 500 litres, including writing of date of cleaning with white or black (As applicable) synthetic enamel paint complete all as specified and directed

M&L for cleaning and removing all scales and dirt etc from tanks and from mouths of circulating pipes etc, capacity exceeding 500 litres and not exceeding 1000 litres, including writing of date of cleaning with white or black (As applicable) synthetic enamel paint complete all as specified and directed

S&F in repairs 32 mm bore of discharge waste coupling of PTMT, full threaded (Minimum weight 45 gms, complete all as speciifed and directed.

S&F high density 40mm bore polythylene pipes (HDPE) of pressure rating 6 kg/cm² fixed complete to wall or in floors with necessary socket, elbow & bend etc complete fixed to wall or in floors etc complete all as specified and as directed.

KANT INFRA (BID ID -3464888)