Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.4 LAccepted-AOC SOUTH CANEL PAR PO PANAGARH BAZAR DISTT PASCHIM BARDWAN WB PIN 713148 | PANAGARH BAZAR | PASCHIM BARDWAN | WEST BENGAL | 713148 | L1 | Accepted-AOC LOWEST RATE QUOTED | |
| 2 | L2₹33.5 L+₹1.1 L (3.27%)Rejected-AOC VILL P O MANKAR DIST BARDHAMAN PIN 713144 | MANKAR | BARDHAMAN | WEST BENGAL | 713144 | L2 | Rejected-AOC HIGHER RATE QUOTED THAN L1 | |
| 3 | L3₹34.8 L+₹2.4 L (7.34%)Rejected-AOC | L3 | Rejected-AOC HIGHER RATE QUOTED THAN L1 | |
| 4 | L4₹36.4 L+₹4.0 L (12.2%)Rejected-AOC | L4 | Rejected-AOC HIGHER RATE QUOTED THAN L1 | |
| 5 | L5₹36.8 L+₹4.4 L (13.5%)Rejected-AOC | L5 | Rejected-AOC HIGHER RATE QUOTED THAN L1 |
Tender Value
₹42.7 L
EMD Value
₹85,500
Closing Date
28 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE PANAGARH
GARRISON ENGINEER PANAGARH, MILITARY ENGINEER SERVICES, PO-PANAGARH, DIST-BURDWAN, WEST BENGAL, PIN-713420
All as per BOQ
2023_MES_599819_1
8400-980/E8
Open Tender
Civil Works
Works
180 days
PANAGARH
Class D and Category a(i) (Building)
6 documents required · 6 mandatory
₹500
GE PANAGARH
₹85,500
Yes
4 Aug 2023
31 May 2023
29 Jun 2023
31 May 2023
28 Jun 2023
14 Jun 2023
Amount
M&L for excavating over areas, n.exc 1.5 m deep and getting out in soft/loose soil complete all as specified and as directed.
Removing excavated soil to a distance n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and as directed.
M&L for providing precast cement concrete in Type B1 1:2:4 (using 20 mm graded stone aggregate) in windows or door cills, lintels , bressumers,steps quoin blocks (for use with masonry) string courses, copings, kneelers,apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders etc with plain fair faces, including chamfers, weatherings, throating, etc and setting in mortar CM (1:4) complete with joints to match all as specified and as directed by the Engr-in-charge.
M&L for 500 mm thick Kankar or laterite,with mix of fly ash ,clinker & stone dust in the proportion of 1:3:6 ( i.e. 10% fly ash,30% clinker & 60% stone dust ) laying in layers n.exc 10cm thick ,watering ,ramming and compacted to required camber and gradient complete all as directed by Engr-in-charge .
Rolling and consolidating formation surfaces in cutting with power roller exc 8 tonne and n.exc 12 tonne complete all as specified and as directed.
M&L for Soling with 150 mm spread thickness (or sub base) with broken boulders or quarried stone, interstices filled, surface formed and rolled and considered to required gradient and camber complete all as directed by Engr-in-charge.
M&L for 7.5 cm thick(compacted thickness) WBM, with coarse aggregates (basalt type of aggregate) of grading 2 (63mm to 40mm size) or of grading 3 (50 to 20mm size), spread, rolled and consolidated to gradient and camber required with preparing unsurfaced WBM by brushing with wire brushes for removing mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc complete all as specified and as directed.
M&L for PCC (1:4:8) 100 mm thick Type D2 (using 40 mm graded stone aggregate) used as in sub base floor/pavings and finishing complete all as specified and as directed.
M&L 150 mm thick PCC M-25 (design Mix) (using 20mm graded crushed stone aggregate) as in hardstanding laid in panels, finishing the surface even and finish the surface by brooming complete all as specified and directed. Note:(i) Material for PCC M-25 shall be carried out from RMC as approved by Engr-in-Charge (ii) Plate viberator to be used for compacting of floor (iii) Contractor shall furnished necessary test report of M-25 and purchase voucher of plant for this aspect before claiming of RAR. (iv) Quoted rates shall be deemed to be included for necessary T&P, Transportation and plasticizer and nothing extra paid to this aspect.
M&L for rendering 15 mm thick in CM (1:4) on fair faces of brick work or concrete surfaces of wall, surface finished even and smooth without using extra cement complete all as specified and as directed.
Forming Contraction (Dummy) joints 65 mm deep x 10mm wide using cut with diamond cutter filled with sealing compound grade B complete all as specified and as directed.
Forming Construction joints 45 mm deep x 10mm wide using cut with diamond cutter filled with sealing compound grade B complete all as specified and as directed.
S&F reinforced concrete pipes ,class NP2, 200 mm bore laid and jointed in trnches or in floors complete with collar complete all as specified and as directed.
M&L for PCC 1:3:6 type C2 (using 40 mm graded stone aggregate ) in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for pipes of 200 mm bore complete all as specified and as directed.
M&L for broken stone of boulders hardcore of gauge n.exc 63 mm deposited, spread and levelled in layers n.exc 15 cm thick, watered and rammed to a true surfaces complete all as specified and as directed.
M&L for sand filling under floors or in foundation including watering and consolidation complete all as specified and as directed.
M&L for machine pressed prepolished precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M- 40 Grade with grey cement and pigments complete all as specified and as directed.
M&L for Brickwork with flyash bricks old size, straight or curved on plan exc 6m mean radius, built in CM (1:4) complete all as specified and as directed.
M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick spread, levelled and rammed including watering complete all as specified and directed.
M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
All as per item No 20.00 mentioned here-in-above but 6mm to 8mm dia complete all as specified and as directed.
M&L for preparing newly plastered surfaces of walls and applying two coats of white wash incl. one coat of primer complete all as specified and as directed.
ANIMA ENTERPRISE
M/S JK TRADING
M/s BISWAJIT GHOSH
M/S Dey Construction
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .