GE/ALP (8170B) KOLKATA OF 2022-23

Amount

M&L for suspended false ceilling (Decorative Type) system using chicogo metalic (E grid) exposed suspende system, grid section size 600mm x 600mm comprising of GI powder coated main runner of dimension 39 mm x 24mm x 0.80mm thick ( thickness comprising of GI/0.4+ PPPCGS/0.3mm & weight of Runner 1.35 kg for 3600mm length) Cross Tee of dimensions 29mm X 24mm x 0.8 mm thick wall angle 22.2mm x22.2mm x 0.65 mm thick ( thickness comprising of GI/0.35 + PPPCGS/0.3 mm & Weight of angle 0.70 kg for 3050 mm length) with and including 6 mm thick HPSC ( High pressure steam cured) pre- primed, self embossed textured designer board, water resistant termite resistant, fire resistant for insulation and accustic purpose to be placed in the grid system duly suspended with 6 mm dia G I bars hangers fixed with steel dash through fasteners from purlins of the roof with butterfly clips (Wt- 0.007 Kg/clip) hold down clips (Wt - 0.0035 Kg/clip) with Provn of light fixture complete all as directed.

S&F Steel work in tubular trusses, posts,rafters, struss and brackets etc including special shaped washers etc. complete using ERW or induction butt welded tubes incl fixing to walls and similar supports etc complete all as specified and directed.

Taking down cement plaster including tiles on brick or stone wall surfaces including glazed tiles wherever exists including raking out joints, hacking for key and scrubbing down with water complete all as specified and as directed.

M&L for 15 mm thick rendering on other than fair faces of brick work or concrete surfaces in cement mortar (1:6) surface finished even and smooth without using extra cement with water proofing compound complete all as specified and directed.

M&L for 10mm thick plastering in ceiling surfaces in cement mortar (1:3) surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparing surfaces new decorated plastered or unplastered surfaces of wall, pillasters, cornices etc and applying two coats of acrylic distemper over 3mm thick wall care putty in two layers (Each layer of 1.5mm Thick) on newly plastered surfaces to make smooth and even complete all as specified and as directed.

M&L preparation of new plastered surface and applying three coats of white wash on ceiling all complete in all respect as specified.

M&L preparation of old surface and applying one coat of white wash on ceiling complete in all respect as specified.

M&L preparation of old decorated surface and applying one coat of oil emulsion distemper including preparation of old sufaces of wall etc complete all as specified.

M&L preparation of old painted surfaces of wood and wood based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Dismantiling of floor hearth or wall tiling incl cement mortar (but not backing), and rubbish off the premises (out of MOD land), complete all as specified and as directed by Engineer-in-charge.

Demolition of cement concrete (unreinforced) of any descriptions, below or above Ground floors (Floor Topping, Sub Base etc) not exc 150mm thick, above or below ground level complete all as specified and as directed.

Material and Labour for 25mm thick plain Cement concrete type B- 1, (1:2:4) (using 12.5mm graded stone aggregate) as in floor, etc. complete all as speficied and as directed.

M&L for Double charged vitrified ceramic coloured tiles 8-9mm thick (square /rectangular ) polished area of each tiles exceeding 0.42 sqm but not exc 1.00 Sqm (1200mmX600mm) as in floor, Screed bed or bedding layer 15 mm thick in cement mortar (1:6) etc. set and jointed in neet cement slurry and pointed white or coloured cement to match the shade of the tiles laid over complete all as specified and directed .

M&L for Double charged vitrified ceramic coloured tiles 8-9mm thick (square /rectangular ) polished area of each tiles exceeding 0.42 sqm but not exc 1.00 Sqm (1200mmX600mm) as in skirting etc. set and jointed in neet cement slurry and pointed white or coloured cement to match the shade of the tiles laid over Screed bed or bedding layer of mortar 10 mm thick in cement mortar (1:4) as in dado/skirting complete all as specified and directed .

S&F powder coated aluminium Partition wall of frame size 80mm x 38mm x 2.00 mm with standard beads/glazing clips, locking arrangement etc with necessary all fittings complete all as per manufacturer's instructions and all as specified and as directed by the Engr-in-Charge.

M&L in repair 9 mm thick prelaminated partilce boards interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screw to timber frame for pelmet boxes,aluminium door and aluminium partions , fixed in repair complete al as specified.

S & F 10 mm thick toughened glass fixed over aluminum partition with nesecessary stainless steel fittings and fixtures as table partitions etc complete all as specified.

S&F 18/19 mm thick Block boards, grade 2 quality, interior grade, decorative type with decorative face veneer on both faces incl all around beading/lipping fixed with aluminum partition as tabble top with necessary fittings and fixtures etc complete all as spd and directed.

Taking down carefully unserviceable aluminium/copper point wiring light/fan/socket or power complete and including unscrewing from board (fitting and fixture such as switches, sockets, ceiling rose, lamp holders, brackets, pendent, regulators, sockets, energy meter, Bracket /sketch fitting etc) and removing material from site and making good to the disturbed surface matching with existing specification complete. (Note all old materials have to kept & shown at site to the Engr-in-Charge after removal.

M&L for point wiring for one light/ bell/ fan controlled by one number one way switch for 5Amps SSC complete with 1100V grade FRLSH PVC insulated unsheathed multistranded copper conductor cable conforming to IS : 694 of size 1.5 Sqmm two runs single core for phase and neutral drawn through in and including PVC concealed conduit of suitable size (minimum 20mm dia medium grade ISI Marked) complete with one run of 1100V grade FRLSH PVC insulated multistranded copper conductor cable 1.5 Sq mm single core green colour for earth continuity conductor and connecting to common earth dolly incl provn of modular type galvanized MS sheet pressed sunken box not less than 1.00 mm thick concealed on wall including fixing of modular cover plate of suitable modules with fixing screws, for fixing of modular type switches / socke t/ Fan regulator etc. complete including making good of disturbed surfaces of wall/ceiling/floor in same specification as per existing surrounding surface complete all as specified and directed. Note : Proper colour code of wiring to be maintained.

All as per item No. 21 here in before but for 5 Amps Socket on same board complete all as specified and directed.

All as per item No. 21 here in before but for 5 A socket point on independent board complete all as specified and directed.

All as per item No. 21 here in before but for 15 A socket point independent with 2.5 sqmm 1100V grade FRLSH PVC insulated copper conductor complete all as specified and directed.

All as per item No. 21 here in before but for 15 Amps Power socket/AC point on independent board with 4.0 sqmm 1100V grade FRLSH PVC insulated copper conductor complete all as specified and directed.ard.

Material and labour for of sub-main wiring with two run of 1100 V grade FRLSH PVC insulated & unsheathed 6.0 Sqmm single core multi stranded copper conductor cable alongwith one run of 6.0 Sqmm 1100 V grade PVC insulated & unsheathed single core multi stranded copper conductor cable for earth continuity conductor connected to common earth dolly, drawn through existing concealed steel conduit or PVC conduit complete all as specified and as directed by the Engr-in-Charge. Note : (i) Three runs of 6.0 Sqmm cable shall be measured as one length.

Supply and fixing of 20mm dia rigid non-metallic PVC conduit (Medium grade) for laying/fixing of LAN / Internet cable complete all as specified and as directed by the Engr-in-Charge.

S & F Modular type switch, one way 6 Amps , 1 module complete (Make:-Legrand/Anchor(Roma)/Crabtree)

S & F modular type socket 5 pin, 6 Amps 2 module complete. (Make:-Legrand/Anchor(Roma)/Crabtree)

S & F Modular type socket 5 pin, 16 Amps 2 module complete (Make:-Legrand/Anchor(Roma)/Crabtree)

S & F Modular type switch, one way 16 Amps, 1 module complete (Make:-Legrand/Anchor(Roma)/Crabtree)

S & F Modular type fan regulator step type(2 module)120 Watt. (Make:-Legrand/Anchor(Roma)/Crabtree)

S & F Ceiling rose, 3 terminal, PVC/ polycarbonate isolated body, 230 V.

Supply and fixing as in repair SPN MCB DB 12 way with Amps rated copper bus bar, neutral link, suitable for mounting MCB's 240 volts double door type including taking down old one and making good the disturbed surface complete all as specified and as directed by the Engr-in-Charge. (Make : ABB /Legrand/ Havells/L&T/Schineider.)

Supply and fixing MCB 06 Amps to 32 Amps, single pole, 240 Volt "C" series, breaking capacity 10 KA complete all as specified and as directed by the Engr-in-Charge. (Make : ABB /Legrand/ Havells/L&T/Schineider.)

Supply and fixing MCB 06 Amps to 32 Amps, SPN, 240 Volt "C" series, breaking capacity 10 KA complete all as specified and as directed by the Engr-in-Charge. (Make : C&S /Legrand/ Havells/L&T.)

Supply and fixing for AC power supply unit 6 module consisting of in built modular motor starter, plug top, 20 Amp Socket and box duly fixed/grouted on wall complete all as specified and as directed by the Engr-in-Charge. (Make : North West/Havells/Crabtree/Anchor)

S&F LED tube light fitting 4 ft 20 watt, 230 volt energy efficient comprises of extruded PVC housing, with inbuilt driver and PC diffuser including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.all as specified and directed. (Make: Magik (CAT No- BWUA020C1293)/Crompton)

S & F in repair LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with inbuilt driver, suitable for roof ceiling including connecting up with driver three core flexible copper conductor wire of suitable size complete all as specified and as directed by the Engr-in-Charge. Make : Crompton , Cat No. : LCTLRNE-36-FO-CDL Havells (CAT No- VENUSNEOHE4x1PLR36WLED8576)/ Philips(CAT No- RC38BBLED36S-6500PSUOD WHPIR)/MAGIK (CAT NO-PCAC036N2016)

Taking down of indoor unit of existing split AC and refixing at new location in same room and connecting the copper pipe, insulation, reffiling of gas (including supply of Material) etc all as directed

Material and labour for point wiring for one light/fan/call bell point with 1.5 sqmm PVC insulated FRLSH unsheathed copper cable multistranded conductor 1100 volts grade controlled by one way switch including 1.5 sqmm PVC (FR-LSH) insulated unsheathed copper cable multistrand conductor 1100 volts grade for continuity earth wire connected to common earth dolly drawn through suitable size of non metallic rigid PVC heavy duty of size 25 mm dia having wall thickness not less than 1.5mm/suitable size of casing caping (as per directed) with all accessories and sunk cast pressed steel terminal box made out of MS sheet 1.2 mm thick for mounting of fittings like switch, socket and fan regulator with 3mm thick bakalite sheet cover or for fixing of switch/sockets/regulators etc as per site requirement after and making good the distrubed surfaces as per the existing complete all as specified and as directed.

All as per item No 41 here-in-before but for 3 pin 6 Amps switch socket combination on the independent board with 1.5 sqmm cable complete as specified and directed.

All as per item No 41 here-in-before but for switch socket combination 2 in 1,3 pin 5/15 Amp on independent board with single core 2.5 Sqmm PVC unsheathed copper cable and single core 2.5 sqmm copper conductor cable as earth continuity conductor complete all as specified and as directed.

M & L in repair for switch socket combination 2 in 1, 5 pin 5 Amps, 240 V Flush type, all as specified. (Make: Anchor/Indo Asian/Havells.)

Supply and fixing of flush switch socket combination 2 in 1,5/15 Amps, 230 Volts, including boxes , cover plate etc universal complete all as specified and as directed by the Engr-in-Charge.

Supply and fixing of switch flush type 5/6 Amps 230 Volt single pole, one way including boxes , cover plate etc complete all as specified and as directed by the Engr-in-Charge.

Supply and fixing of flush type Fan regulator upto 100 watt ,230 volt complete all as specified and as directed.

Supply and fixing ceiling rose surface bakelite three terminal 65 x 50mm, PVC/Polycarbonate,isolated body complete all as specified and as directed by the Engr-in-Charge.

Supply and fix ceiling fans, complete with three blade, down rod, accessories 230V, 1200mm sweep, with Squirrel cage induction motor with their all accessories fixed properly on roof surfaces including making hole to fasterning 'S" hook including cutting of roof/ceiling finishing with cement plaster and making good to the distuberd surface of roof internal sides and two coats of distumber to match with the existing colour white/colour wash including connecting/testing complete as directed. (Make : Crompton/Havells/Bajaj.)

S&F Wall Mounted fan of size 400 mm sweep, . single phase heavy duty with their all accessories including including connecting/testing complete as directed. (Make : Crompton Greaves/Bajaj/Usha)

Supply and fixing sub-main wiring (concealed type) for main DB's to sub DB's with PVC (FR-LSH) insulated & unsheathed two runs of 6 sq mm single core multi stranded copper conductor cable, 1100 Volt grade alongwith one run of 6 sq mm PVC FR-LSH insulated & unsheathed copper conductor cable, 1100 Volt grade, connected to common earth dolly as earth continuity conductor, drawn through and including PVC rigid conduit with all accesseries carefully complete all as directed by the Engr-in-Charge. Make :- Anchor/Havells/Polycab. Note : Three runs of 6 sqmm cable and one run PVC Conduit shall constitute one unit.

Supply and fixing sub-main wiring (concealed) for main DB's to sub DB's with PVC (FR-LSH) insulated & unsheathed two runs of 4 sq mm single core multi stranded copper conductor cable, 1100 Volt grade alongwith one run of 4 sq mm PVC FR-LSH insulated & unsheathed copper conductor cable, 1100 Volt grade, connected to common earth dolly as earth continuity conductor, drawn through and including PVC rigid conduit with all accesseries carefully complete all as directed by the Engr-in-Charge. (Make :- Anchor/Havells/Polycab.) Note : Three runs of 4 sqmm cable and one run PVC Conduit shall constitute one unit.

Supply and fixing of MCB DB SPN (double door) 4 Ways including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall complete all as specified and as directed by the Engr-in-Charge. (Make :- Havells/Legrand/L&T.)

Supply and fixing of MCB DB SPN (double door) 8 Ways including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall complete all as specified and as directed by the Engr-in-Charge. Make :- Havells/Legrand/L&T.

Supply and fixing of MCB SPN, 40 to 63 Amps, 240 Volts, 'C' series, breaking capacity 10KA complete all as specified and as directed. Make :- Havells/Legrand/L&T.

Supply and fixing electric water heater,storage type steel body with MS Tank with Glassline Coating tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc all as specified and as directed. (Make :- Crompton /Versa/Bajaj/Usha.)

Supply and fixing PVC inlet connector pipe 450mm long for geyser, heavy duty,with brass coupling both ends sutiable to fix inlet of geyser.

Supply and fixing of UPVC pipe heavy duty 15 mm dia for connection for incoming cold water and outgoing hot water all as specified and directed.

Supply and fixing stop valves , cast copper alloy chromium plated of size 15 mm dia.

Supply and fixing bib taps, cast copper alloy fancy type chromium plated of size 15 mm dia.

TOTCO

NUPUR CONSTRUCTION

SEN ELECTRIC WORKS

PUTUL CONSTRUCTION CO.

JOY TRADING CORPORATION

P N GUPTA AND SONS

RADHA ENTERPRISE