Street lighting arrangement from near Din Dayal Chowk to near Amlo Project Office coal transport transportation road under CCD GM unit, Dhori Area

Amount

Supply of cement pole, 8 m long

Erection of RCC/PCC pole of following length in brick ballast and ramming the foundation, finishing with 150 mm thick cement concrete (1:3:6) layer on top with including excavation and re-filling etc. as required. : Above 6.5 metre and upto 8.0 metre

Erection of steel tubular pole in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling and secured with holding clamps, bolts, nuts etc as required

Erection of all aluminium conductor of 7/1.96 mm to 7/3.10 mm diameter including binding etc as required

Supplying of channel iron 75 mm x 40 mm x 6 mm (7.14 kg per metre) cross arm for 2 wire over head line complete with clamps, bolts, nuts and washer etc including drilling of holes for insulator pins etc (as per drawing) and painting with and finished paint as required

Supplying of channel iron 75 mm x 40 mm x 6 mm (7.14 kg per metre) cross arm for 4 wire over head line complete with clamps, bolts, nuts and washer etc including drilling of holes for insulator pins etc (as per drawing) and painting with and finished paint as required

Erection of channel iron cross arm on cement pole etc. as required

Supplying and erection of stay set complete (galvanised) with 19/20 mm dia x 1.8 metres long stay rod, anchor plate of size 45 cm x 45 cm x 7.5 mm, thimble, stay clamps, bow tightener, 7/3.15 mm dia G.I. stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required

Supply of bend pipe for fixing of light fittings

Supply of 220 V grade, 4 core, 35 sqmm aluminium aerial bunched cable with aluminium wire

Supply of 220 V grade 10 sqmm 2 core aluminium cable ISI mark

Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required. 63 Amp TP&N.

Supply and fixing timer switch for light fittings 63 A capacity, 220 V grade

Supplying and drawing following sizes FRLS PVC insulated copper conductor, single core cable in existing surface/ recessed steel/ PVC conduit as required. : 2 x 1.5 sq.mm for connection of light

Fixing of light fittings on top of pole

Supplying and erection of 100 mm x 80 mm pin insulator complete with G.I. spindle and nuts etc. as required.

Supplying and erection of 100 mm x 110 mm shackle insulator complete with G.I. spindle and nuts etc. as required.

G.I. wire 8 SWG (+) Erection of G.I. wire no. 8 SWG including binding etc. as required

Supply of clamp, nut & bolt suitable for 8 m long cement pole for fixing of light fittings

Providing of PVC joint box of size 200 mm X 150 mm

Providing of nuts and bolts of size 16 mm X 125 mm

Flat iron clamp for fixing of PVC joint box on pole top

Erection of 220 V grade, 4 core, 35 sqmm aluminium aerial bunched cable with aluminium wire including fixing of PVC joint box of size 200 mm X 150 mm on pole top

Providing and making collar with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) of specified size and shape including form work, plastering if required

Carriage of pole at work site from CCD substation to work site

Total impact of GST for the purpose of CTC

M/S A N TRADERS

M/s Arvind Kumar Singh