SPECIAL REPAIR TO BLDG NO 18 INSIDE COLLEGE AREA

Amount

B/ R PORTION Dismantling plain or corrugated galvalume sheeting any gauge, thickness, in roof covering, ridges, eaves board, etc., complete all as specified and as directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Dismantling unframed wooden scantling 40 Sqcm and over in section in any position fixed in PCC with or without nails, brads, spikes, etc. and removed unserviceable wooden scantling from site all as specified and as directed.

Taking down cement or cement lime plaster of any description on brick or stone wall etc including racking out joints, hacking for key scrubbing down with water etc., and removing unserviceable rubbish off the premises all as specified and as directed.

Demolition of Brickwork or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

S & F for rolled mild steel in Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc (cut to ordinary length i.e. within 20mm of the length indicated) conforming to Fe-290 Gde E-165 complete all as specified and as directed.

S & F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Description all as per Item No 8 above but except sheeting any thickness all as specified and as directed. Note : Serviceable Pre-Painted galvalume sheets obtained from dismantling shall be reused.

S & F pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / ridges / eaves board / cladding to wall and similar items fixed with self tapping screws with EPDM washers all as per manufacturer's specification and as directed.

M & L for precast cement concrete (1:3:6) type C-1 (using 20 mm graded stone aggregate) block masonry with solid blocks, exc 10 cm in width and set in cement mortar (1:6) complete all as specified and directed.

M & L for rendering 15mm thick in CM (1:4) mixed with WPC as per manufacturer's instruction on fair face of concrete /brick surfaces, finished even and smooth without using extra cement complete all as specified and as directed. Note : WPC shall be measured and paid seperately.

M & L for providing PCC (1:2:4) type B-1 (using 20mm gradded stone aggregate) as in coping, cills, bands, lintels n.exc 1.5m length, string courses, apex stone, bed plates, kerbs and the like incl form work, weathering, slightly rounded or chamfered angles and throating all as specified and directed.

Taking down rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to store (measured overall as fixed along the centre line overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed.

S & F for 110mm dia PVC (SWR) pipes, type 'B', single socketted, in any length with rubber ring joints, fixed to walls with suitable MS clamps all as specified and as directed.

S & F PVC (SWR) bends 110mm dia all as specified and as directed.

Taking down the existing old tip up/push up chairs keeping aside for refixing at same/another location all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and as directed.

Demolition of unreinforced plain cement concrete in ground floors and pavings n. exc 15 cm thickness (below or above ground level) and removing unserviceable debris off the premises all as specified and as directed.

Taking door frame with shutter (without taking off shutters from the frames) n. exc. 1.5 Sqm each complete all as specified and as directed.

Taking door Chowkhats or frames with shutter (without taking off shutters from the frames) exc 1.5 Sqm but n.exc 4 Sqm each complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises all as specified and as directed.

Fixing the old tip up chair with the help of nut and bolt complete all as specified and as directed. Note : Cost of providing necessary new nut and bolt is included in the rate quoted.

M & L for Servicing of chairs such as loose of nut, bolt, screws including missing nut, bolt to be fitted as required and making serviceable complete all as specified and as directed.

S & F in repairs seat for tip up chairs with of density 40 g/Sqcm as specified and as per sample existing (approx size 22" x 22" x 4 "thick ) complete all as approved and as directed.

S & F in repairs back for tip up chairs of density 32 g/Sqcm as specified and as per sample existing (approx size 22" x 22" x 4" thick ) complete all as approved and as directed.

S & F in repairs rexine cloth not less than 1.70 mm thick (48" wide) with RM material cost not less than Rs. 250/- and colour matching with existing and pasting with approved adhesive and stitching as required in existing tip up chairs all as approved and as directed.

S & F 12 mm dia anchor fastener of length 50 mm and making hole as per size of bolt in legs of tip up chairs for fixing rigidly and making good flooring all as specified and as directed.

M & L for second class hard wood timber scantling clean sawn framed and fixed as runner in PCC for fixing chair etc complete all as specified and directed.

Excavation in trenches, n.exc 1.5m wide and n.exc 1.5m in depth for foundation, or for man holes etc., n.exc 10 Sqm on plan and n.exc 1.5m in depth and getting out in hard/ dense soil all as specified and as directed.

M & L for PCC (1:4:8) type D-2 (using 40 mm gradded stone aggregate) as in foundation, filling and mass concrete complete all as specified and as directed.

Returning, filling in trenches, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick at back side of wall complete all as specified and as directed.

Removing excavated material (soil) to a distance n.exc 50 m and depositing where directed at a level n.exc 1.5 mts above the starting point all as specified and as directed.

M & L for RCC (1:2:4) (nominal mix) type B-1 (using 20mm graded aggregate) as in foundations, including rafts, footings, foundations beams, plinth beams, bases for columns etc basement slabs under-reamed piles and mass concrete complete all as specified and as directed.

M & L for RCC (1:2:4) (nominal mix) type B-1 (using 20mm graded aggregate) as in Columns, pillars, piers, posts and struts etc complete all as specified and as directed.

M & L for RCC (1:2:4) (nominal mix) type B-1 (using 20mm graded aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span etc complete all as specified and as directed.

M & L for RCC (1:2:4) (nominal mix) type B-1 (using 20mm graded aggregate) as in Slab supported in walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like etc ., complete all as specified and as directed.

M & L for use and waste of timber as in flat form work to sides of rough finished surfaces of concrete as in foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundations and plinth beams and similar work vertical or to batter complete all as specified and as directed.

M & L for use and waste of timber as in form work to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.

M & L for use and waste of timber as in form work to sides and soffits of roof beam, beam haunchings, girders, bressummers, lintels , cantilevers, shelves including supports, overhangs, etc.., also splays between floors and beams etc., for fair finished surfaces of concrete flat all as specified and as directed.

M & L for use and waste of timber as in flat form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar works not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

M & L for mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking bending spirally for hopping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.90 mm dia complete all as specified and as directed.

Description all as per Item No 42 above but 5 mm dia and over upto and including10 mm dia as in stirrups complete all as specified and as directed.

Rough excavation n.exc 1.5m deep and getting out in soft/ loose soil complete all as specified and as directed.

Removing excavated material (soil) to a distanc exc 500m and n.exc 1.5 Km and depositing where directed at a level n.exc 1.5 mts above the starting point all as specified and as directed.

M & L for Sand (M Sand) filling under floors or in foundations, spread and levelled including watering and consolidation complete all as specified and as directed.

M & L for providing 100mm thick PCC (1:4:8) (type D-2), (using 40mm graded stone aggregates) as in subbase complete all as specified and directed.

M & L for providing 25mm thick PCC (1:2:4) type B-1, (using 20mm graded stone aggregate) as in sub base complete all as specified and as directed.

M & L for vitrified ceremic joints less tiles 8 to 10 mm thick light shade (square/rectangular) area of each tile exc 0.36 Sqm but n.exc 0.42 Sqm in floor etc., set and jointed in neat cement slurry and pointing in white or coloured cement to match the colour of tiles, laid over and including 15 mm thick screed bed in CM (1:6) complete all as specified and as directed.

Description all as per Item No 49 above but on vertical surfaces, laid over and including 10 mm thick rendering/ backing coat in CM (1 :4) complete all as specified and directed.

M & L for second class hardwood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and as directed.

S & F for 40mm thick second class hardwood Semi-glazed skeleton shutters, open rebated prepared to receive toughned glass at top and 25mm thick wooden timber at bottom portion, edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass sizes of members of shutters as specified in SSR Part I, section 8, clause 8.24 (a), supplied and fitted to chowkhat complete all as specified and as directed. Note : Toughned glass shall be measured and paid seperately.

S & F 40mm thick second class hardwood Plain framed panelled shutters (any numbers of panels) panels will be curved/designed timber as approved by GE on both sides (feather edges), and fitted to chowkhats complete all as specified and directed.

S & F for 35mm thick second class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze , etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as in windows and ventilators as specified as specified in SSR part-I, section 8, clause 8.24(b), suplied and fitted to chowkats complete all as specified and as directed.

S & F for 6mm thick toughned glass to be fixed in doors and windows frame with beadings and fittings complete all as specified and directed.

S & F for 4.8mm thick Sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 Sqm in each pane complete all as specified and as directed.

S & F 150mm long brass tower bolt with cast or sheet barrel and rolled or cast bolts and fixed complete all as specifed and directed.

S & F 300mm long brass, sliding bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and as directed.

S & F 150mm size brass handles, cast type polished bright complete all as specified and directed.

S & F 125mm size brass handles, cast type polished bright complete all as specified and directed.

S & F 140mm (overall length of cover plate) floor door stopper of brass body and tongue with hard drawn steel spring complete all as specified and as directed.

M & L for precast cement concrete (1:3:6) type C-1 (using 20 mm graded stone aggregate) block masonry with solid blocks, exc 10 cm in width and set in CM (1:6) complete all as specified and directed.

M & L for walling of Ashlar stone masonary, Plain, well bonded, build in CM (1:4) complete all as specified and direcred.

Extra over hammer dressing facings with maximum depression on face from straight edge held against the dressed surface n.exc 20mm to block-in-course masonary as in punched dressed face as in granite and trap stone complete all as specified and directed.

M & L for raised pointing to ashlar masonary or polygonal rubble masonry in CM (1:4) complete all as specified and as directed.

M & L for rendering 15 mm thick in CM (1:6) on fair faces of brick work /stone work, finished even and smooth without using extra cement complete all as specified and as directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets and suspension grid complete all as specified and as directed.

M & L for Gypsum board ceiling 12 mm thick with using GI frame work including plaster of paris decorative type cornices etc in multilevel (Two tier) , any shape as approved by GE and two coats of plastic emulsion paint over a coat of primer over and including of one coat of wall care putty etc, all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal/ Aluminium frames including punching or drilling out old glazing pins/ spring clips complete all as specified and as directed.

S & F 5.5 mm thick Sheet glass, ordinary quality and glazing with oil putty/ Aluminium rubber beading in squares exceeding 0.5 Sqm in each pane complete all as specified and as directed.

S & F 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

S&F in repair 150mm brass tower bolt with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and as directed.

S&F in repair 250mm brass, sliding bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed.

S&F in repair 150mm brass handles, cast type polished bright complete all as specified and as directed.

S&F in repair floor door stopper of brass body and tongue with hard drawn steel spring complete all as specified and as directed.

S & F Toughned glass door 12 mm thick fixed in position with suitable SS fittings; locking arrangements, 600mm size length, stainless steel handles etc all as specified and as directed.

S & F 12mm thick Toughned glass tobe fixed in position with suitable SS fittings etc all as specified and as directed.

Dismantling Stone slab and tiles laid bedded and pointed in any mortar of any description or thickness in floor, approns etc., all as specified and as directed.

M & L for Granite stone slab flooring 16-18 mm thick any colour/shade machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing, rounding edges as required, laid over and including15mm thick rendering in CM (1 :4) to be fixed flooring and door /window cladding /openings complete all as specified and as directed.

M & L for preparation of new or previously untreated wooden surfaces, sizing, filler coat with wood filler liquid transparent and staining with spirit and applying one coat under coating varnishing and further finish coat synthetic varnish complete all as specified and directed.

M & L for preparation of old treated wooden surfaces, sizing, staining with spirit and applying one coat under coating varnishing and further finish coat synthetic varnish complete all as specified and directed.

M & L for preparing new surfaces of wall and applying two coats of distemper oil emulsion over and including one coat of primer and one coat of wall care putty complete all as specified and directed.

M & L for complete removal of existing treatment from old wall surfaces applying two coats of oil bound distemper over and including one coat of primer and one coat of wall care putty complete all as specified and directed.

M & L for complete removal of existing treatment from old celing surfaces applying two coats of oil bound distemper over and including one coat of primer complete all as specified and directed.

M & L for preparing old painted wooden surface and applying two coats of synthetic enamel paint exc 10 cm width or girth complete all as specified and as directed.

M & L for preparing old painted steel surface and applying two coats of synthetic enamel paint exc 10 cm width or girth complete all as specified and as directed.

M & L for preration of old wooden surface and applying two coats of touch wood of any description, width or girth including a coat of wood filler all as specified and directed.

M & L for applying two coat of external weather coat with brush/roller finished even and smooth on old plastered and unplastered surfaces of walls all as specified and as directed.

E/M PORTION Taking down carefully old existing Un-Serviceable Al/Copper batten/surface conduit/concealed conduit point wiring (light/exhaust fan/socket/call bell/ Power point) complete including (fittings and fixtures such as switches, ceiling roses, shades, brackets, sockets, holders, light fittings, call bells, Fluorescent tube light fitting) removing the Un-Serviceable/chargeable etc. retrieved materials from site of work & making good the disturbed surfaces of walls/floors/ ceilings etc. complete all as specified and directed. Note : Old existing 2' x 2' light fittings & PVC Exhaust fans of any size/type taken down/dismantled to be deposited to MES E/M Storeyard & cost of transportation of the same from site of work to MES E/M Storeyard is deemed to be included in the unit quoted rates.

Disconnecting/dismantling of old existing un serviceable DB's any way 240/415 Volts with their old/un serviceable burnt MCBs complete all as specified and directed.

M & L for point wiring with 1.5 Sq mm, PVC insulated, FRLS, single core, copper conductor cable, 1100 Volt grade, multi stranded drawn through and including medium grade Rigid non metalic PVC conduit conealed in wall/ceiling/roof etc with all necessary accessories for One light/exhaust fan/call bell/5A Independent point controlled by one switch with and including continuous 1.5 Sqmm PVC insulated single core copper conductor cable earth continuity conductor connected to common earth and earth dolly complete all as specified and directed. Make of cable : Havells/Polycab/Finolex.

Note: (i) The wiring shall be done in proper color coding using red,yellow,blue for phases, black for neutral and green for earth. (ii) The cost of cutting chases (if any) and making good the disturbed surfaces is deemed to be included in the unit quoted rates.(iii) Modular flush boxes will be measured & paid seperately. (iv) Contr/Firm is required to visit the site of work for any doubts/clarifications w.r.t. specifications/qty/location etc. before quoting of the Tender. Any query/clarifications etc. after conclusion of the Contract shall NOT be entertained & decision of the AO shall be final & binding.

Description all as per Item No 87 above but with PVC insulated copper conductor cable of size 2.5 Sqmm and 2.5 Sqmm for earth continuity conductor for 16A switch socket complete all as specified and as directed.

M & L for sub-main wiring alongwith earth wire of size (4 x 10.0) sq. mm + (2 x 10.0) sq. mm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including non-metallic PVCrigid conduit (medium grade) with all fittings and accessories ISI marked for conduits & sinkings for modular boxes & making good to walls, floors etc. complete all as specified & as directed. Make of cable : Havells/Polycab/Finolex. Note : (i) 04 runs of PVC wire, 02 runs of earth wire & one run of PVC rigid conduit (medium grade) will be measured as one length. (ii) Modular metal flush boxes (if req) shall be measured & paid separately.

Description all as per Item No 89 above but of size (4 x 6.0) sq. mm + (2 x 6.0) sq. mm complete all as specified and as directed.

Description all as per Item No 89 above but of size (4 x 4.0) sq. mm + (2 x 4.0) sq. mm complete all as specified and as directed.

M & L for sub-main wiring alongwith earth wire of size (2 x 6.0) sq. mm + (1 x 6.0) sq. mm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including non-metallic PVCrigid conduit (medium grade) with all fittings and accessories ISI marked for conduits & sinkings for modular boxes & making good to walls, floors etc. complete all as specified & as directed. Make of cable : Havells/Polycab/Finolex. Note : (i) 02 runs of PVC wire, 01 run of earth wire & one run of PVC rigid conduit (medium grade) will be measured as one length. (ii) Modular metal flush boxes (if req) shall be measured & paid separately.

Description all as per Item No 92 above but of size (2 x 4.0) sq. mm + (1 x 4.0) sq. mm complete all as specified and as directed.

Description all as per Item No 92 above but of size (2 x 2.5) sq. mm + (1 x 2.5) sq. mm complete all as specified and as directed.

S & F Modular switch, one way, 10 Amp, 1 Module, 240 volt complete all as specified and as directed. Make : Verona of Crabtree ( Havells), Cat No : ACVSXXW061 or techno-commercially equivalent in Legrand/Anchor Roma/Polycab

S & F Modular switch, one way, 16 Amp, 1 Module, 240 volt complete all as specified and as directed. Make : Verona of Crabtree ( Havells), Cat No : ACVSXXW161 or techno-commercially equivalent in Legrand/Anchor Roma/Polycab

S & F Modular shuttered socket outlet 3 Pin, 6 Amp, 2 Module, 240 volts, ISI marked complete all as specified and as directed. Make : Verona of Crabtree ( Havells), Cat No : ACVKSWW063, or techno-commercially equivalent in Legrand/Anchor Roma/Polycab

S & F Modular shuttered socket outlet 3 Pin, 6/16 Amp, 2 Module, 240 volts, ISI marked complete all as specified and as directed. Make : Verona of Crabtree ( Havells), Cat No : ACVKCWW163 or techno-commercially equivalent in Legrand/Anchor Roma/Polycab

Note for Item Nos 99 to 102 : Design/Drawing/Technical catalogue/specifications along with comparative Rate Analysis to be submitted to the Engr-In-Charge for Make/Sample approval of items whereever equivalency of Item(s) is concerned other than specified Make/Model/Cat/Part Ref concerned.

S & F and concealing modular metal flush box suitable for fixing switches/sockets of 1/2 modules all as specified and as directed. Make : Verona of Crabtree ( Havells), Cat No : ACTXMIIX01/02, or techno-commercially equivalent in Legrand/Anchor Roma/Polycab

S & F and concealing modular metal flush box suitable for fixing switches/sockets of 3 modules all as specified and as directed. Make : Verona of Crabtree ( Havells), Cat No : ACTXMIIX03 or techno-commercially equivalent in Legrand/Anchor Roma/Polycab

S & F and concealing modular metal flush box suitable for fixing switches/sockets of 4 modules all as specified and as directed. Make : Verona of Crabtree ( Havells), Cat No : ACTXMIIX04 or techno-commercially equivalent in Legrand/Anchor Roma/Polycab

S & F and concealing modular metal flush box suitable for fixing switches/sockets of 6 modules all as specified and as directed. Make : Verona of Crabtree ( Havells), Cat No : ACTXMIIX06 or techno-commercially equivalent in Legrand/Anchor Roma/Polycab

S & F modular cover plate suitable for fixing switches/sockets of 1/2 modules all as specified and as directed. Make : Verona of Crabtree ( Havells), Cat No : ACVPPCWV01/02 or techno-commercially equivalent in Legrand/Anchor Roma/Polycab

S & F modular cover plate suitable for fixing switches/sockets of 3 modules all as specified and as directed. Make : Verona of Crabtree ( Havells), Cat No : ACVPPCWV03 or techno-commercially equivalent in Legrand/Anchor Roma/Polycab

S & F modular cover plate suitable for fixing switches/sockets of 4 modules all as specified and as directed. Make : Verona of Crabtree ( Havells), Cat No : ACVPPCWV04 or techno-commercially equivalent in Legrand/Anchor Roma/Polycab

S & F modular cover plate suitable for fixing switches/sockets of 6 modules all as specified and as directed. Make : Verona of Crabtree ( Havells), Cat No : ACVPPCWV06 or techno-commercially equivalent in Legrand/Anchor Roma/Polycab Note for Item Nos 99 to 106 : The make/model of modular metal flush boxes & modular cover plates shall be same as that of modular switches & sockets.

S & F ceiling rose surface PVC/ Polycarbonate, Isolated body with face Bakelite three terminal complete all as specified and directed. Make: Havells/Legrand/Anchor

S & F wall / surface mounted LED light fitting 10 W or next higher rating (2 FT), CRI > 80, CT>5700 K (White), integrated type with all accessories internally prewired and including connecting up with and including twin/three core twisted flexible conductor cable of suitable size incl flexible hose complete all as specified and as directed. Make : Havells, Cat No : LUMILINEPLUSBS 10WLED865SPCSS or techno-commercially equivalent in Philips/Jaquar.

S & F wall / surface mounted LED light fitting 20 W or next higher rating (4 FT), CRI > 80, CT>5700 K (White), integrated type with all accessories internally prewired and including connecting up with and including twin/three core twisted flexible conductor cable of suitable size incl flexible hose complete all as specified and as directed. Make : Havells, Cat No : LUMILINEPLUSBS 20WLED865SPCSS or techno-commercially equivalent in Philips/Jaquar.

S & F recess panel LED DOWNLIGHT fitting 18 W or next higher rating, CRI > 80, CT>5700 K (White), integrated type with all accessories internally prewired and including connecting up with and including twin/three core twisted flexible conductor cable of suitable size complete all as specified and as directed. Make : Havells, Cat No : EDGEPRORDDLR 18WLED857S or techno-commercially equivalent in Philips/Jaquar.

S & F recess panel/wall LED STEP/FOOTLIGHT fitting 3 W or next higher rating, CRI > 80, CT>5700 K (White), integrated type with all accessories internally prewired and including connecting up with and including twin/three core twisted flexible conductor cable of suitable size complete all as specified and as directed. Make : Luker, Cat No : LODFTG3 or techno-commercially equivalent in Philips/Jaquar/Havells.

S & F recess panel LED SPOTLIGHT fitting 3 W or next higher rating, CRI > 80, CT>5700 K (White), integrated type with all accessories internally prewired and including connecting up with and including twin/three core twisted flexible conductor cable of suitable size complete all as specified and as directed. Make : Havells, Cat No : LHEEBCPFUN1W003 or techno-commercially equivalent in Philips/Jaquar.

S & F ceiling/wall/panel mounted LED TRACKLIGHT (WHITE COLOUR)15 W or next higher rating suitable for Track Channel 1/2 Mtrs span, CRI > 80, CT>5700 K (White), integrated type with all accessories internally prewired and including connecting up with and including twin/three core twisted flexible conductor cable of suitable size complete all as specified and as directed. Make : Havells, Cat No : CYLINDROTS15W LED8573WIRE38DWHTor techno-commercially equivalent in Philips /Jaquar. Note : Track Channel 1/2 Mtrs span shall be measured & paid separately under relevant items.

S & F ceiling/wall/panel mounted LED TRACK CHANNEL (WHITE COLOUR) 2 Mtrs length suitable for mounting of 03 Nos Tracklights 15 W, integrated type with all accessories internally prewired and including connecting up with and including twin/three core twisted flexible conductor cable of suitable size complete all as specified and as directed. Make : Havells, Cat No : 2MTR3PHASETRA CKSWHT or techno-commercially equivalent in Philips/Jaquar. Note : Track Lights 15 W shall be measured & paid separately under relevant items.

S & F ceiling/wall/panel/false ceiling mounted LED STRIP LIGHT, 6 W, 12 V or next higher rating, CRI > 80, CT=3000 K (Warm White), integrated type with all accessories internally prewired and including connecting up with and including with suitable LED Striplight drivers with twin/three core twisted flexible conductor cable of suitable size complete all as specified and as directed. Make : Luker, Cat No : LS2835 or techno-commercially equivalent in Philips/Jaquar/Havells. Note : LED Strip Light Drivers shall be measured & paid separately under relevant items.

S & F ceiling/wall/panel/false ceiling mounted LED STRIP LIGHT DRIVER, 12.5 A suitable for Strip Lights 6 W, 12 V or next higher rating, integrated type with all accessories internally prewired and including connecting up with and including twin/three core twisted flexible conductor cable of suitable size complete all as specified and as directed. Make : Luker, Cat No : LSD12 or techno-commercially equivalent in Philips/Jaquar/Havells. Note: LED Strip Lights shall be measured & paid separately under relevant items.

Supply, install, testing & commissioning of Exhaust fan, PVC body with automatic back shutter louvers 250 mm sweep, 1280 RPM or more, Air Delivery not less than 860 CMH, single phase, 240 Volts, AC, 50 Hz and connecting up complete including louvers and provision of cable 3/2 core of suitable size from ceiling rose to fan in flexible hose and making of suitable sized hole in the wall/existing window/ventillator etc. for fixing of the exhaust fan & making good the disturbed surfaces (if any) complete all as specified & as directed. Make : Havells, Cat No: Ventil Air - DX White or techno-commercially equivalent in Usha/Crompton. Note :- (i) The cost of making hole in walls/other surfaces & making good the disturbed surfaces incl any framework/cement work/wood work/welding work etc. required for proper fixing of the exhaust fan & matching to the existing surface is deemed to be included in the unit quoted rates.

S & F MCCB, DB, TPN, 8 ways, DOUBLE DOOR, IP-43, Ik-09 with metal door, rated bus bars, earth bar, neutral links complete incl. blanking plates as required & fixed flush to wall/other surface complete all as specified and as directed. Make : L & T, Cat No : DBGL008DD or techno-commercially equivalent in SIEMENS/LEGRAND.

S & F MCB, DB, TPN, 6 ways, DOUBLE DOOR, IP-43, Ik-09 with metal door, rated bus bars, earth bar, neutral links complete incl. blanking plates as required & fixed flush to wall/other surface complete all as specified and as directed. Make : L & T, Cat No : DBTPN006DD or techno-commercially equivalent in SIEMENS/LEGRAND.

S & F MCB, DB, TPN, 4 ways, DOUBLE DOOR, IP-43, Ik-09 with metal door, rated bus bars, earth bar, neutral links complete incl. blanking plates as required & fixed flush to wall/other surface complete all as specified and as directed. Make : L & T, Cat No : DBTPN004DD or techno-commercially equivalent in SIEMENS/LEGRAND.

S & F MCCB 4P (Ics = 100% Icu) with thermal magnetic release, adjustable short circuit & adjustable overload setting, suitable for isolation, having breaking capacity 25 KA & of rating 80 to 100 A - 01No complete all as specified and as directed. Make : L & T, Cat No : CM9171200KOOG or techno-commercially equivalent in LEGRAND/SIEMENS.

S & F MCB, TPN, 10KA, 415V, "C" curve, 40 A, ISI marked complete all as specified and as directed. Make : L & T, Cat No : BB40400C or techno-commercially equivalent in SIEMENS/LEGRAND.

S & F MCB, TPN, 10KA, 415V, "C" curve, 63 A, ISI marked complete all as specified and as directed. Make : L & T, Cat No : BB40630C or techno-commercially equivalent in SIEMENS/LEGRAND.

S & F MCB, SP, C-Series 240 Volts of capacity 6-32 Amps with breaking capacity 10 KA complete all as specified and as directed. Make : L & T, Cat No : BB10320C or techno-commercially equivalent in Legrand/SIEMENS.

S & F MCB, SP, C-Series 240 Volts of capacity 40 Amps with breaking capacity 10 KA complete all as specified and as directed. Make : L & T, Cat No : BB10400C or techno-commercially equivalent in Legrand/SIEMENS.

Note for Item Nos 112 to 129 : (i) Design/Drawing/Technical catalogue/specifications along with comparative Rate Analysis to be submitted to the Engr-In-Charge for Make/Sample approval of items whereever equivalency of Item(s) is concerned other than specified Make/Model/Cat/Part Ref concerned. (ii) Makes of MCCB/MCB DB Enclosures & MCCBs/MCBs/Change-over switch etc. shall be the same.

M & L for 25mm (external dia) rigid non-metallic medium grade PVC conduit exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks, cable ties etc. for laying/passing of cable etc. complete all as specified & as directed.

M & L for 40mm (external dia) rigid non-metallic medium grade PVC conduit exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks, cable ties etc. for laying/passing of cable etc. complete all as specified & as directed.

AM BUILDERS