ADDN ALTN INCL RENOVATION OF BLDG NO P 207 RR BLOCK, RENOVATION OF LADIES STAFF TOILET IN BLDG NO P 230 TINY TOTS ADDN ALTN OF DOORS AT DSTSC CLASSES LABS IN AIR HANGER AND RENOVATION OF LADIES TOILETS IN LOGISTICS SECTION AT MILIT AND CERTAIN WORKS

Amount

B/R PORTION S & F for Pre- painted galvaniume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling plain or corrugated steel sheeting,any gauge ,thickness including Nainital or similar pattern roof covering complete all as specified and directed..

S & F Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) Fe-410- W(Gde- E-250) quality-B complete all as specified and directed.

Dismantling structural steel work in any situation incl door, gate etc complete all as specified and directed.

M &L two coat of synthetic enamel paint to steel surface over a coat of rex oxid primer exc 10 cm width or girth incl preparation of new surfaces complete all as specified and as directed .

Taking down of cement plaster of any desc including racking out of joints hacking for keys and scrubing down with water etc complete all as specified and directed.

M & L for rendering 15mm thick in cement mortar 1:4 as on brick or concrete or block surfaces using WPC ( measured separately) finished surfaces even and smooth without using extra cement, complete all as specified and directed. Note : WPC will be paid seperately relevant item.

M&L for rendering 15 mm thick on brick or concrete or block surfaces in cement mortar 1:6 finished even and smooth without using extra cement, complete all as specified and directed.

Supply only WPC complete all as specified and directed.

M&L for preparation of surfaces and applying 2mm thick wall care putty in two layers on walls/concrete over new plaster surfaces internally complete all as specified and directed.

M&L for two coats of oil bound distemper over a coat of primer on New surfaces of wall complete all as specified and directed.

M&L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @1.43litre/10sqm over and including priming coat of exterior primer applied @ 0.90litre/ 10Sqm over Old/New surfaces of wall including necessary scaffolding required for painting work, safety measures etc complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from frame) area exc.1.5 sqm and not exc.4 sqm each complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from frame) area not exc.1.5 sqm each complete all as specified and directed.

Taking down shutters of any description, area not exc.1 sqm each complete all as specified and directed.

S & F for pressed steel frames of size 125 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, as per ISI mark, including PCC (1:3:6), type C-0, (using 12.5 mm graded stone aggregates) as in filling of pressed steel frames complete all as specified and as directed.

Supply and fix for 30mm thick flush shutters solid core construction, with laminated decorative surface both sides with block board core and plywood face panels, commercial type on both sides including second class hard wood plain cover fillets 35X6mm all around the shutters complete all as specified and directed.

S & F for factory made solid Panel PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 4mm thick moulded PVC sheet on the front face and 4mm moulded prelam colour PVC sheet on back face wirth wood free EPS, fixed in frame at site as per specification and drawing including fittings complete all as specified and directed.

Supply and fix for solid PVC door frame of size 50mm x 47mm, made out of 5 mm thick plain colour PVC sheet, reinforced with mild steel square tube complete all as specified and directed.

S & F for aluminium powder coated three track sliding window with two glazed shutters, one 4mm thick float glass ordinary quantity and one shutter of stainless steel wire mesh 0.36 mm dia wire and 1.40mm aperture including good quality of bearing handle, locks, PVC rubber lining etc complete all as specified and as directed. Catlouge numbers of Jindal company or equivalent make as specified. Sections of Jindal company : Three track bottom – 20957, Three track top/vertical – 20958, Handle – 20606, Interlocking – 20605, Top and bottom – 20604.

S & F for 300mm long brass sliding door bolts with sand or die cast brass hasp, staple (bolt type) and fixing bolt with roller or drawn brass bolts, ISI marked, complete all as specified and as directed.

S & F for 300 mm long aluminium anodised, barrel tower bolts of extruded section, complete all as specified and directed.

Supply and fix for floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, overall length of cover plate 150mm complete all as specified and directed.

Supply and fix for aluminium (extruded section) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed

Supply and fix for floor door stopper of brass body and tongue with hard drawn steel spring of over all length of cover plate 150mm complete all as specified and as directed.

S&F for 20mm dia CPVC pipes SDR 11 including all Brass CPVC fittings for 20mm bore pipe on walls/ceiling or laying in floors and including 20 to 15mm dia fittings for fixing of sanitary fittings complete including taking up or down existing steel tubing and connections or removal to store complete all as specified and directed.

S&F for 15mm dia CPVC pipes SDR 11 including all Brass CPVC fittings for 15 mm bore pipe on walls/ceiling or laying in floors and including 20 to 15mm dia fittings for fixing of sanitary fittings complete including taking up or down existing steel tubing and connections or removal to store complete all as specified and directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedding and pointed in any mortar complete all as specified and directed.

M & L for vetrified colour dark shade Ceramic tiles 8 to 9mm thick (square/rectangular) dark shade /ultracharged polished,Light shade area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match on 15mm thick screed bed in Cement Mortar 1:6 complete all as specified and directed.

M&L for full body colour Marble tiles glossy finish 9-10 mm thick (square/regtangular) polished , stain proof and durable ad abrasion resistant with high flexural strength area area of each tiles ( 300 mm X 600 mm) or not exc 1.28 sqm in skirting/vertical surfaces etc. as per manufactureres specification confirm to IS 13630 and ISO 10545 and joineted neat in cement slurry and pointed in white or colour cement to match with over & including 10mm thick rendering in CM 1:4 complete all as specified and directed.

Demolition of concrete of any description and in any position not otherwise specifically provided for cement concrete complete all as specified and directed.

M & L for Plinth protection 50 mm thick in PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) laid in alternate bays (not exceeding 2 Sqm each) finished even and smooth without using extra cement and providing joints complete all as specified and directed.

M & L for PCC 1:2:4 type B-2(40 mm graded aggregate) as in foundation filling and mass concrete complete all as specified and directed.

Demolition of Brickwork or stone/ boulder masonry/PCC block walling laid dry in cement mortor including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for precast cement concrete block masonry with solid blocks of PCC 1:3:6 type C-1 using 20 mm graded stone aggregate, exc. 10 cm in width and setting in CM 1:6, complete all as specified and directed.

Supply and fix for vitreous china coloured wash down water closet one piece EWC cascade type ‘P’ trap / S trap in built seat cover and flushing cistern, low level, valveless, symphonic action type complete with inlet ball valve, float and handle complete all as specified and as directed.

S&F Counter top Wash hand basin, vitrous china, coloured flat back of size 470 x 705 x 185 mm including brass waste coupling, CP bottle trap 32mm size with 250mm & 190mm long wall connection pipe & wall flange, 15mm dia fancy type single lever tall boy with 150mm extention body fixed spout without popup waster system with 600mm long braided hoses complete all as specified and directed.

S&F Bib taps fancy type chromium plated for 15mm bore pipe, screwed for iron pipes or for brass ferrule all complete as specified and as dierected.

S&F fancy type, chromium plated angular stop cock fixed with wall flange for 15mm bore of pipe complete all as specified and as directed

S&F stainless steel grating door 125mm dia complete all as specified and directed.

S&F Soap dish any type fixed type fixed to plugs with chromium plated brass screws complete all as specified and directed

S&F Hand shower (health faucet) (ABS Chromium plated) with 8mm dia, 1.2mtr long flexible tube and wall hook complete all as specified and as directed.

S&F brass chromium plated tubular towel rail 20mm dia including brackets both side complete all as specified and directed

M&L for 20mm Gun metal globe or gate valve ISI Marked with iron wheel head screwed both ends size for iron pipe, fixed complete all as specified and directed.

M&L for cutting chases, pinning in brick, stone, concrete block walls making good to facings where required and pointing in cement mortar 1:3 to concealed water tubing and making good complete all as directed by Engr-in-Charge.

S&F PVC (SWR) junction double ( single T) of size 110mm bore jointing with solvent cement complete all as specified and directed.

S&F PVC (SWR) reducer 110mm to 75mm bore jointing with solvent cement complete all as specified and directed.

M & L for RCC nominal mix slabs supported on walls, Type Bo 1:2:4 (12.50 mm graded aggregate) beams and columns in floors, roofs, slab projections, landings, balconies, canopies, deck slabs and in shelves and the like including scaffolding in any height any discription complete all as specified and directed.

S & F TMT bars, 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally or hooping for column, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia complete all as specified and directed.

S&F TMT bars, 08 mm dia and over, cut to length, bent to shape required including cranking, bending spirally or hooping for column, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia complete all as specified and directed.

M& L Formwork to flat sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed.

Dismantling wall /ceiling board (fiber,pulp,insulation,etc.incl all fitting ) or insulation board /slab/blankets, any thickness, including cover fillets complete all as specified and directed.

S&F of gyproc white water proofing gypsum moisture resistance boards rectangular for false ceiling 10 mm thickness moisture resistance < 5% total water absorption , acoustic waterproofing suspended ceiling system with prima fine fissured tile with semi concealed grid, the tile should have humidity in module size of 600x 600x10 mm with Bio block coating on the face of the tile, impact resistant and suitable for green bldg application, eith recycled content of 63 %. The tile shall be laid on semi concealed grid system with 15 mm white flange incorporating 6 mm central reveal in white/black colour and with web height of 38 mm and load carring capacity of minimum 11.68 kg/sqm.Silhouette. main runner and cross tees to have mitred ends & birdmouth notches to provide mitred cruciform junction. The T sections have galvanising of 120 gms/sqm and passed through 500 hrs of salt test. all as per manufacutrer's instructions complete all as specified and directed.

M&L Hardcore of 100 mm thick gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed

M & L 75 mm thick PCC 1:4:8 Type D 2 using 40 mm graded stone aggregate as in sub base surface finished even and rough to receive floor topping complete all as specified and directed.

M & L 40 mm thick PCC cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in floor complete all as specified and directed.

S&F in repairs 12mm thick factory made moulded glossy/Matte Finish solid waterproof MDF board for kitchen wall cabinet back side and etc. comprising of with and including necessary all other fixing arrangement as per requirement at site. For fixing the items fitted in position to wall minimum screws size 120mm complete all as specified and directed by Engr-in-Charge.

S & F for Rubber sheet with fabric 10 mm thick backing or insert and plain coloured or marbled topping, matt or glossy, laid in floors with approved adhesive complete all as specified and directed.

S & F for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

M&L for 50mm cupboard magnet including high quality magnet and steel plate complete all as specified and directed.

S&F 40mm width of flaps (when open) in mm continous (piano) hinges, mild steel, bright finish or electro galvanised complete all as specified and directed.

S&F 150mm brass cupboard handles, cast type, polished bright fixed with nut screws and washers complete all as specified and directed.

S&F 150mm Hasp and staples safety type brass with mild steel hinge pin inlcuding bolt to hinge plate and fixed with screws of 125mm size complete all as specified and directed.

S&F wall panelling on existing wall surface consisting 12 mm thick prelaminated waterproof MDF boards plain colour MDF inclusive of solvent cement and fixing at site on MDF frame as per specification and drawing to be fixed on wall by self tapping screw of size 19mm x 6mm after puttin rawal plugs. The edge and periphery finally to be covered by extruded MDF corner angles beading/fillet complete all as specified and as directed by Engr-in-Charge.

M & L second class hard wood in scantling clean swan complete all as specified and directed.

M&L for Fly ash brick masonry, straight or curved on plan exc. 6m mean radius built in CM 1:6 complete all as specified and directed.

M&L preparation of newly/existing walls plastered surface of walls over 10 cm width or girth over a coat of approved primer and applying two coat of oil emulsion distemper (tint as approved by GE) over a coat of primer complete all as specified and directed.

M&L for two coats of external waterproof emulsion paint Apex Ultima or equivalent complete all as specified and directed over a coat of alkali resistant primer on new /old plastered surfaces of wall including necessary scaffolding required for painting work & safety measures complete all as specified and as directed .

M & L for granite 18mm thick (of any type) work (table rubbed and one edge rounded for jambs and polished) in verticle surfaces,steps, jambs, pillars, window-cills, window Jambs and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L for 12 mm thick decorative acrylic false ceiling with modern design for bathroom and including GI powder coated grid work of size 600mm x 600mm size complete all as per manufacturers instructions and directed by Engr-in-Charge

S&F in repair 18mm thick prelaminated particle board interior grade, conforming to IS-12823, Gde-I prelaminated both side with decorative choice lamination as in cupboard shutters, Kitchen/WHB cabinets etc fixed with screw including 3mm thick, 1st class HW(TW) beading all around on edging to timber frame work all as specified and directed by Engr-in-Charge.

M&L for pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified, supplied and fixed size 105X60mm complete all as specified and directed.

M&L for PCC 1:3:6 type C-0 (using 12.5mm graded aggregate) as in filling steel frames etc. incl necessary form work complete all as specified and directed.

M&L for 35mm thick Flush shutters with lipping all around of solid core construction with block board core and ply wood face panels commercial type on both side complete all as specified and directed.

M&L for 0.9mm thick decorative laminate type1 of surface finish, colour and pattern as approved by Engr-in-charge, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.

S&F Brass handles, cast type polished bright, of size 200mm complete all as specified and directed.

M&L for 125mm butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type B-12 complete all as specified and directed.

Supply and fix for aluminium powder coated louvered ventilator with provision of exhaust fan using ‘Jindal” aluminium section or equivalent make as specified including glass 3mm thick ordinary quality, frosted and stainless steel wire mesh 0.36mm dia wire and 1.40mm aperture etc complete all as specified and directed.

S&F anodized aluminium powder coated of any colour (thickness of powder coating not less than 50 micron), in frame for door, partition wall etc. with one or more rebates, shutters, grills including joining cleat, glazing clips, rubber packing anodised aluminium snap for fixing glass, etc. complete all as specified and directed.

Dismantling floor or wall tiling incl cement mortar bedding (but not backing) removing serveaceable tiles to store and rubbish off the premises complete all as specified and directed.

M & L for 25mm thick cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in floor levelling course and in similar situations complete all as specified and directed.

M&L for coloured non skid ceramic tiles of size 400mm x 400mm x 7mm thick of colour and pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 15mm thick screed bed in cement mortar (1:4) as in floors complete all as specified and as directed.

M&L for coloured glazed ceramic tiles of size 600mm x 300mm x 7 to 8mm thick of colour and pattern as approved by GE, as in vertical surface, including highlighter tiles as required ,set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 10mm thick screed bed in cement mortar 1:3 complete all as specified & directed.

S&F Counter top Wash hand basin, vitrous china, coloured flat back of size 565X425X140 mm including brass waste coupling, CP bottle trap 32mm size with 250mm & 190mm long wall connection pipe & wall flange, 15mm dia fancy type single lever tall boy with 150mm extention body fixed spout without popup waster system with 600mm long braided hoses complete all as specified and directed.

S&F 15mm dia bore, two way bib cock with wall flange, screwed down for CPVC/iron Pipe complete all as specified and directed.

S & F full length continental Swivel glass mirror with chrome finish and luxury look superior built quality product complete all as specified and as directed.

S&F Chromium Plated Toilet Roll Paper Holder with stainless steel flap complete all as specified and directed.

S&F Chromium Plated Towel bar 600mm long complete all as specified and directed.

S&F Chromium Plated soap dispenser with glass bottle complete all as specified and directed.

S&F sheet glass shelf assembly consisting of 5mm thick sheet glass shelf with chromium plated bracket guard and railing 600mm long complete all as specified and directed.

S & F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf corner type three tyres with chromium plated brackets, bracket guard and railing 30cm size incl screws, fixed as in repair complete all as specified and directed.

S & F flash touch free infrared hand dryer complete all as specified and directed.

S&F PVC connection 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed.

Taking down 15mm bore steel water tubing and connections complete all as specified and directed.

S&F 15 mm bore steel water tubing, ‘medium grade’ galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Taking down 20mm bore steel water tubing and connections complete all as specified and directed.

S&F 20 mm bore steel water tubing, ‘medium grade’ galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F 1000 ltrs capacity, Rotational moulded polythylene water storage tank ISI Marked (cylindrical vertical with closed top) hoisted and in position including ball brass valve 20mm high pressure with polythene float and fly nut complete including dismantling existing water tank and removing to store complete all as specified and directed.

Supply and fix in repairs for vitreous china coloured wash down water closet (pedestal pattern) cascade type ‘P’ trap, in built seat cover and flushing cistern, low level, valveless, symphonic action type complete with inlet ball valve, float and handle complete all as specified and as directed.

M&L for 10 to 12mm thick frosted toughened glass fixed to door and window and partition as directed by Engr-in-Charge including necessary wooden beadings, steel clamps, hinges nails, screw, complete all as specified and directed.

S&F for Stack clamps for bore (any dia) of pipe out of 50 mm by 5 mm flat iron and 16mm dia round iron stays,100mm including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.

S&F in PVC (SWR) floor trap, dia of outlet 100 mm, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F PVC (SWR) pipes, single socketed in any length with rubber ring joints, joints fixed to wall of 75mm bore complete all as specified and directed.

S & F for powder coated aluminium door shutters,partition , aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified. for powder coating of any colour (Thickness or powder coating not less than 50 micron) complete all as specified and directed.

S & F for powder coated aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified Add for powder coating of any colour (Thickness or powder coating not less than 50 micron) complete all as specified and directed.

Supply and fix in repair for aluminium powder coated partition using ‘Jindal’ aluminium SP/ DP section or equivalent make as specified with 5mm thick tinted glass, PVC rubber beading,12mm thick prelaminated particle board fixed with glazing clips etc complete all as specified and as directed. Sections : SP (Single partition) - 20033, DP (Double partition) - 20034,Glazing clips - 4407

S & F for sheet glass,4 mm thick ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.

M&L for 15 mm thick rendering in CM 1:4 on fair faces of brick work & concrete, finished even and fair on external wall surfaces complete all as specified & directed.

M and L for coloured Non skid ceramic tiles7 to 8 mm thick (st noquare/rectangular) area of each tile exc 0.06 sqm but n exc 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match the floor laid over 15mm thick screed bed in cement mortar 1:6.complete all as specified and directed

M and L for coloured Glazed ceramic tiles 350X250mmX7mm/450x350x7 mm thick set and jointed in neat cement slurry and pointed in coloured cement to match the floor as on vertical surfaces laid over 10mm thick cement screed in 1:4. complete all as specified and directed

S&F 10 liters capacity PVC low level flushing cistern with ISI marked body, fixed in repairs complete all as specified and directed.

M&L for Anodised aluminium snap grid frame work of size 605 X 605 mm for false ceiling complete all as specified and as directed.

M&L for 12 mm thick perforated particle board/tiles for insulation and accoustic purposes, 60 x 60cm in size fixed with nails to timber frame work or with staples on snap grid including 4 mm dia. GI mild steel plain wire complete all as specified and directed. .

S&F 100mm dia CP grating for nahani traps with or without hole for waste pipe complete all as specified and directed.

S&F Stop valve cast copper alloy screwed down high pressure with capstan head, handle chromium plated angular type screwed both ends for iron pipe 15 mm bore or for unions complete all as specified and directed

S&F vitreous China wash basin, white, flat back, size 550x450mm including necessary brackets, cp couplings, pvc waste pipes etc. complete all as specified and directed.

S&F pillar taps 15 mm, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

Supply & fixing PVC bath cabinet, size 450 x 600mm, comprising of looking glass, space for bath soaps, shampoo, tooth brush and paste, handle towel rail, fixed as in repairs complete all as specified and directed.

S&F of 110mm bore PVC (SWR) pipe, single socketed in any length with rubber ring joint fixed to walls complete all as specified and directed

S&F of 75mm bore PVC (SWR) pipe, single socketed in any length with rubber ring joint fixed to walls floor/intrenches complete all as specified and directed.

S&F PVC (SWR) bends any radius 110 mm dia with access door complete all as specified and directed.

S&F PVC (SWR) bends any radius 75 mm dia with access door complete all as specified and directed.

S&F PVC (SWR) vent cowl of 110 mm dia complete all as specified and directed.

S & F PVC (SWR) vent cowl 75mm Bore complete all as specified and directed.

S&F PVC (SWR) junction single ( single T) of size 110mm bore jointing with solvent cement complete all as specified and directed.

S&F PVC (SWR) floor trap 110/ 75 mm, with grating including jointing with solvent complete all as specified and directed.

S&F PVC (SWR) gully trap 125/110, setting and jointing to waste pipe fixed in cement concrete 1:2:4 type B1 63 mm outlet dia complete all as specified and directed.

S&F 100mm long butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed.

S&F aluminium anodised barrel tower bolt of extruded section of 150mm complete all as specified and directed.

S&F aluminium handles cast type anodised of 150mm complete all as specified and directed.

S& F 250 mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

Supply only 20mm bore ball vavle high pressure of PTMT with epoxy coated aluminium road and high density platic ball screwed for iron pipe and fixed complete all as specified and directed.

S&F factory made solid panel colourful design PVC door shutter with MS square tube 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC sheet stirip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top,lock and bottom rail on either side & as gap insert for top rail & bottom rail .panelling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement S&F in the frame at site as per specification complete all as specified and directed

S&F 3mm thick frosted one side sheet glass ordinary quality in square n exc 0.5 sqm each pane in new glazed shutter complete all as specified and directed.

M&L PCC 1:3:6 type C1, 75 mm thick finished even and smooth without using extra cement as in plinth protection including forming of joints 10mm wide and 75mm deep and joint filled with bitumin and sand mixture in 1:1 ratio complete all as specified and directed.

S&F steel work in tubular /square/rectangular trusses ,cantileve,purlin staging including special shaped washer etc. complete using ERW or induction butt welded tubes confrming to IS 1161-1979 grade St-240 as in purlin, rafter etc complete all as specified and directed.

M&L for MS framed work of angle, tee, F.I conforming to Fe-290 (Gde E-165), as in stucture for water tank, Wind ties etc including welding complete all as specified and directed.

S&F Steel ventilators with top hung shutter including hinges, steel peg stay, complete all as specified and directed

Cutting into existing manholes for connecting new drains internal dia of pipe 200mm making good to pipe & to or finished and reforming benching as required. 3/4 section in cement concrete (1:2:4) type B-1, smoothcutting out existing benching for forming branch channel (1/2) rendering complete all as specified and as directed.

E/M PORTION Taking down carefully aluminium / copper point wiring complete (light, fan socket & power) including unserviceable fixtures and fittings such as switches ceilimg roses pendents regulators sockets light fittings etc complete removing material for taking credit & making good disturbed wall / floor etc complete all as directed by Engineer-in-Charge

Taking down sub main wiring complete including fitting and fixtures, removing materials for making good disturbed surfaces of walls, floors, roof etc, complete all as specified and directed.

Taking down carefully unserviceable DBs any type/size With MCCBs/MCBs//Isolator etc and disconnecting and making good disturbed surfaces complete all as specified and directed.

M&L Point wiring complete with 1.5 sqmm single core PVC insulated and unsheathed cable 1100 volts, FRLS grade with multistranded copper conductor ISI marked drawn through heavy duty PVC concelad conduit fixed in walls / roofs / floors / ceiling etc. and including provision of 1.5 sqmm stranded copper conductor cable as earth continuity conductor and connected to common earth dolly including concealed modular flush boxes including Modular box , modular cover plates with frame mounting for housing the switches, socket outlets etc, complete all as specified and directed. (a) One light point controlled by one way switch.

(b) One fan/exhaust fan point controlled by one switch and one regulator.

(c) One 3 pin switch socket outlet point 5 Amps on independent board.

(d) One 3 pin switch socket outlet point 5 Amps on same board with other switch.

All as per item above here in before but with copper conductor cable for one 3 pin socket outlet, 15 amp independent, with cable 2.5 sqmm size complete all as specified and directed.

S & Fix modular switch 1 way 6A, 1 module complete all as specified and directed.

S & Fix modular switch1 way 16A, 1 module complete all as specified and directed.

S & Fix modular socket out let 6A 2/3 on combined 2 module complete all as specified and directed.

S & Fix modular socket out let 6A/16A-2/3 pin combined 2 module complete all as specified and directed.

S & Fix Ceiling rose surface backlite 65x50mm 3 terminals complete all as specified and directed.

S&Fix fan regulator electronic 2 modular type volts AC 50 HZ, 300 Watts, 4 stepcomplete all as specified and directed.

Supply and fixing of fillamanet bulb of 12 watts all as specified and directed by Engr-in-charge.

Supply and fixing of LED COB Light 12 Watts (Warm White / White as directed) recessed type with Independent electronic LED driver including all necessary fixing arrangements complete all as specified and directed.

Supply and fixing of decorative hanging light with all necessary acceosires complete all as specified and directed.

Supply and fixing of down light 1x1 feet (colour as directed by Engr-in-charge) surface mounted including all accessories complete all as specified and directed.

Supply and fixing of Flexiible LED strips/profile (Warm White / White as directed) of 5 Amps capacity with optimum brightness & uniformity of light including drivers and necessary fixing arrangements complete all as specified and directed.

Supply and fixing of Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings complete all as specified and directed.

Supply & Fixing of LED Photo Light 6 Watts luninarie (white / warm white as directed) complete fittings with all fixing arrangements complete all as specified and directed.

Taking down the defective ceiling fan / Exhaust fan of any sweep and make after disconnecting electrically & mechanically and examine & carry out the servicing/overhauling / re-winding the burnt/short circuited winding with same guage supper enameled copper wire to maintain speed at load the ceiling fan by thoroughly cleaning the bearing, shaft, stator, rotor & applying the lubricant / grease to the bearing including applying one coat of painting, replacing of broken canopy, re-fixing, testing in all respect for smooth running complete all as specified and directed.

S&Fix MCB DB VTPN 4 ways,with metal double door, IP-43 protection suitable for MCCB as incommer and MCB as out going, VTPN DB's 415 volt 3 phase complete with appropriate size copper bus bar and neutral link as required at site and including cutting chases to wall for fixing of DB and making good distrubed wall/surface all as required at site i.e directed by Engr-in charge.

Supply and fixing MCCB Four pole, 415 volts, 63 Ampere, rupturing capacity 16 KA, in the DB complete all as specified and directed.

S & Fix sheet metal enclosure distribution board SPN, 8 ways 240 volts, with 200 amps rated bus bar, with IP 43 protection and double door, suitable for mounting MCBs all as specified and as directed including taking down old MCB DB complete all as specified and directed.

S & Fix of MCB single pole and neutral, 240 volts, 6 to 40 Ampere, rupturing capacity 10 KA, ‘C’ series complete all as specified and directed.

S & Fix of MCB single pole, 240 volts, 6 to 40 Ampere, rupturing capacity 10 KA, ‘C’ series complete all as specified and directed.

S & Fix Metal plug and socket DB's with MCB 20A SP for AC complete all as specified and directed.

M & L for submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable , multistranded on the surface through and including suitable size of PVC casing and capping with its accessories all as specified and directed by Engr-in -charge for the following :- (a) 2x1.5 sq mm and 1x1.5 sq mm as earth wire

(b) 2x2.5 sq mm and 1x2.5 sq mm as earth wire

(c) 2x4.0 sq mm and 1x4 sq mm as earth wire

(d) 2x6.0 sq mm and 1x6 sq mm as earth wire

Taking down Split type AC of any capacity / make/ model from existing position and carry out the servicing by cleaning the unit with water, tightening the terminal connections to avoid loose connections, applying the oiling/greasing to fan motor, bearings all as specified for smooth running including cleaning the air filter/check the thermometer setting and recharging the suitable gas etc for 1.5-2.0 ton. complete all as specified and directed.

M & L Earthing complete with galvanised steel earth plate electrode 60x60cmx06mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion complete all as specified and directed.

S & F for recess mounted 2' x 2' square LED panel 36 watts, Ultra modern recess mounting luminaire with high performance LEDs, suitable for mounting with Armstrong/Grid ceiling complete all as specified and directed.

S & Fix LED batten 10 Watts with aluminium housing & integrated electronic driver including necessary electric connections 3 core 1 sqmm insulated copper wire from ceiling rose to tube light fitting complete all as specifed and directed by Engineer-in-charge.

S&F exhaust fan, AC, single phase, 240 V, 300 mm sweep, metal body with metal blades metal louvers, including connected with 3 core 1.5 sq mm copper conductor cable from ceiling rose to exhaust fan and cutting of holes and making distrubed surface good to match the existing wall complete all as specified and directed.

S & Fix sheet metal enclosure distribution board SPN, 4 ways 240 volts, with 200 amps rated bus bar, with IP 43 protection and double door, suitable for mounting MCBs complete all as specified and directed.

S&F exhaust fan, AC, single phase, 240 V, 250 mm sweep, PVC body louvers, including connected with 3 core 1.5 sq mm copper conductor cable from ceiling rose to exhaust fan complete all as specified and directed.

PATILSON CONSTRUCTIONS (BID ID -3143968)